Novel synthesis of nano‐calcium carbonate (CaCO3)/polystyrene (PS) core–shell nanoparticles by atomized microemulsion technique and its effect on properties of polypropylene (PP) composites

Calcium carbonate (CaCO₃)/polystyrene (PS) nanoparticles (<100 nm) with core–shell structure were synthesized by atomized microemulsion technique. The polymer chains were anchored onto the surface of nano‐CaCO₃ through triethoxyvinyl silane (TEVS) as a coupling agent. Ammonium persulfate (APS), sodium dodecyl sulfate (SDS) and n‐pentanol were used as initiator, surfactant, and cosurfactant, respectively. Polymerization mechanism of core–shell latex particles was discussed. Encapsulation of nano‐CaCO₃ by PS was confirmed by using transmission electron microscope (TEM). Grafting percentage of core–shell particles was investigated by Thermogravimetric Analyzer (TGA). Nano‐CaCO₃/PS core–shell particles were characterized by Fourier transform infrared (FTIR) spectrophotometer and differential scanning calorimeter (DSC). The results of FTIR revealed existence of a strong interaction at the interface of nano‐CaCO₃ particle and PS, which implies that the polymer chains were successfully grafted onto the surface of nano‐CaCO₃ particle through the link of the coupling agent. In addition, TGA and DSC results indicated an enhancement of thermal stability of core–shell materials compared with the pure nano‐PS. Nano‐CaCO₃/PS particles were blended with polypropylene (PP) matrix on Brabender Plastograph by melt process with different wt% of loading (i.e. 0.1–1 wt%). The interfacial adhesion between nano‐CaCO₃ particles and PP matrix was significantly improved when the nano‐CaCO3 particles were grafted with PS, which led to increased thermal, rheological, and mechanical properties of (nano‐CaCO₃/PS)/PP composites. Scanning electron microscope (SEM) and atomic force microscope (AFM) images showed a perfect dispersion of the nano‐CaCO₃ particles in PP matrix. Copyright © 2011 John Wiley & Sons, Ltd.     

Thermal stability and UV-shielding properties of polymethyl methacrylate and polystyrene modified with calcium carbonate nanoparticles

The influences of nanosized CaCO₃ on the thermal and optical properties embedded in poly(methyl methacrylate) (PMMA) and polystyrene (PS) were investigated. Calcium carbonate nanoparticles were synthesized by in situ deposition technique, and its nano size (32–35 nm) was confirmed by scanning electron microscope (SEM) and X-ray studies. Nanocomposites samples of PMMA/CaCO₃ and PS/CaCO₃ were prepared with different filler loading (0–4 wt%) of CaCO₃ nanoparticles by solution mixing technique. The Fourier transform infrared analysis confirmed that CaCO₃ nanoparticles were present in the polymers matrices. The morphology and elemental composition of nanocomposites were evaluated by SEM and energy dispersive X-ray spectroscopy. The thermal properties of nanocomposites were characterized by differential scanning calorimetric, thermogravimetric, and differential thermogravimetry analysis, and the results indicate that the incorporation of CaCO₃ nanoparticles could significantly improve the thermal properties of PMMA/CaCO₃ and PS/CaCO₃ nanocomposites. The glass transition temperature (T _g ) and decomposition temperature (T _d ) of nanocomposites with 4 wt% of CaCO₃ nanoparticles were increased by 30 and 24 K in case of PMMA/CaCO₃ and 32  and 15 K in the case of PS/CaCO₃ nanocomposites, respectively. The obtained transparent nanocomposites films were characterized using UV–Vis spectrophotometer which shows the transparencies of nanocomposites are almost maintained in visible region while the intensity of absorption band in ultraviolet (UV) region is increased with CaCO₃ nanoparticles contents and these composites particles could enhance the UV-shielding properties of polymers.     

The effect of gamma irradiation and particle size of CaCO3 on the properties of HDPE/EPDM blends

Mechanical blends formed of 50 wt% of high-density polyethylene (HDPE) and 50 wt% of ethylene–propylene–diene-monomer (EPDM) elastomer have been loaded with 50 wt% of three different particle size of CaCO₃, namely CaCO₃ 300, CaCO₃ 700, and CaCO₃ 2000 whereby the latter has the smallest particle size of ～311, 82 μm. Mechanical, physico-chemical and thermal properties were followed up as a function of irradiation dose for loaded and unloaded blends. The results obtained indicated that the values of tensile strength, tensile modulus at 50% elongation, gel fraction and decomposition temperature increase with increasing irradiation dose. On the other hand elongation at break, permanent set and swelling number were found to decrease with increasing irradiation dose. Moreover, the effect of particle size of CaCO₃ was observed in a limited but apparent upgrading of mechanical, physico-chemical, and thermal properties. The order of semi-reinforcing capacity of three different types of CaCO₃ is as follow: CaCO₃ 2000 > CaCO₃ 700 > CaCO₃ 300 > unloaded blend. Whereby CaCO₃ 2000 has the smallest particle size.     

Comparative study on the effect of partial replacement of silica or calcium carbonate by bentonite on the properties of EPDM composites

The effects of the partial replacement of silica or calcium carbonate (CaCO₃) by bentonite (Bt) on the curing behaviour, tensile and dynamic mechanical properties and morphological characteristics of ethylene propylene diene monomer (EPDM) composites were studied. EPDM/silica/Bt and EPDM/CaCO₃/Bt composites containing five different EPDM/filler/Bt loadings (i.e., 100/30/0, 100/25/5, 100/15/15, 100/5/25 and 100/0/30 parts per hundred rubber (phr)) were prepared using a laboratory scale two-roll mill. Results show that the optimum cure (t₉₀) and scorch (t_S2) time decreased, while the cure rate index (CRI) increased for both composites with increasing Bt loading. The tensile properties of EPDM/CaCO₃/Bt composites increased with the replacement of CaCO₃ by Bt from 0 to 30 phr of Bt. For EPDM/silica/Bt composites, the maximum tensile strength and E_b were obtained at a Bt loading of 15 phr, with enhanced tensile modulus on further increase of Bt loading. The dynamic mechanical studies revealed a strong rubber-filler interaction with increasing Bt loading in both composites, which is manifested by the lowering of tan δ at the glass transition temperature (Tg) for EPDM/CaCO₃/Bt composites and tan δ at 40 °C for EPDM/silica/Bt composites. Scanning electron microscopy (SEM) micrographs proved that incorporation of 15 phr Bt improves the dispersion of silica and enhances the interaction between silica and the EPDM matrix.     

Formation and transformation of smectic polypropylene nanodroplets

A dispersion of isotactic polypropylene (PP) nanoparticles was produced by interfacially‐driven breakup of PP nanolayers. Layer‐multiplying coextrusion was used to fabricate an assembly of 257 alternating PP nanolayers about 12 nm thick sandwiched between thicker polystyrene (PS) layers. Characterization by thermal analysis and wide‐angle X‐ray diffraction (WAXD) confirmed that PP crystallized primarily in the smectic form when confined as nanolayers. When the layered assembly was heated into the melt, the PP nanolayers broke up to form a dispersion of PP droplets in a PS matrix. After solidification, particle size analysis revealed that 90% of the PP was present as 30 nm nanoparticles. The particles were small enough and numerous enough that most did not contain a primary nucleus. When cooled from melt at 10 °C min^?1, the droplets crystallized by homogeneous nucleation at 40 °C. The droplets were found to be in the smectic form by WAXD. Because crystallization occurred below the temperature of the smectic to α‐form transformation, the intermediate smectic form was stable and did not convert to the α‐form until heated above 70 °C. This result provided direct evidence for an intermediate smectic phase in the process whereby homogeneous nucleation leads to α‐form crystals in confined nanoparticles. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1795–1803, 2006     

Compatibilization effect of TiO2 nanoparticles on the phase structure of PET/PP/TiO2 nanocomposites

Polyethylene terephthalate (PET)/Polypropylene (PP)/TiO₂ nanocomposites were prepared by compounding a PP/TiO₂ nanocomposite premix with PET in absence and presence (up to 6 vol %) of maleic anhydride grafted polypropylene (PP‐g‐MA). In absence of PP‐g‐MA, the TiO₂ nanoparticles were mainly located at the PET/PP interface and to a lesser extent in the dispersed PET droplets. As the TiO₂ nanoparticles were coated by polyalcohol their surface could react with PP‐g‐MA and thus improving the compatibilization with PP. Therefore in presence of PP‐g‐MA the TiO₂ nanoparticles were preferentially located in the PP. The incorporated TiO₂ nanoparticles exerted a compatibilization effect on the PET/PP blend. Depending on the location of TiO₂ three different compatibilization mechanisms were proposed to be at work: (1) Locating at the interface, the TiO₂ nanoparticles decrease the free energy of mixing, and thus increase the thermodynamic stability of the nanocomposites; (2) The TiO₂ nanoparticles at the interface also prevent the coalescence of PET droplets; (3) Preferentially located in the PP matrix, the TiO₂ nanoparticles decreased the viscosity ratio which facilitated the droplet breakup of PET. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1616–1624, 2009     

Reinforcement effect of MAA on nano‐CaCo3‐filled EPDM vulcanizates and possible mechanism

Methacrylic acid (MAA) was used as in situ surface modifier to improve the interface interaction between nano‐CaCO₃ particle and ethylene–propylene–diene monomer (EPDM) matrix, and hence the mechanical properties of nano‐CaCO₃‐filled EPDM vulcanizates. The results showed that the incorporation of MAA improved the filler–matrix interaction, which was proved by Fourier transformation infrared spectrometer (FTIR), Kraus equation, crosslink density determination, and scanning electron microscope (SEM). The formation of carboxylate and the participation of MAA in the crosslinking of EPDM indicated the strong filler–matrix interaction from the aspect of chemical reaction. The results of Kraus equation showed that the presence of MAA enhanced the reinforcement extent of nano‐CaCO₃ on EPDM vulcanizates. Crosslink density determination proved the formation of the ionic crosslinks in EPDM vulcanizates with the existence of MAA. The filler particles on tensile fracture were embedded in the matrix and could not be observed obviously, indicating that a strong interfacial interaction between the filler and the matrix had been achieved with the incorporation of MAA. Meanwhile, the presence of MAA remarkably increased the modulus and tensile strength of the vulcanizates, without negative effect on the high elongation at break. Furthermore, the ionic bond was thought to be formed only on filler surface because of the absolute deficiency of MAA, which resulted in the possible structure where filler particles were considered as crosslink points. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1226–1236, 2006     

The influence of CaCO3 filler component on thermal decomposition process of PP/LDPE/DAP ternary blend

Polypropylene‐low density polyethylene (PP‐LDPE) blends involving PP‐LDPE (90/10 wt%.) with (0.06 wt%) dialkyl peroxide (DAP) and different amounts (5, 10, 20 wt%) of calcium carbonate (CaCO₃) were prepared by melt‐blending with a single‐screw extruder. The effect of addition of CaCO₃ on thermal decomposition process and kinetic parameters, such as activation energy and pre‐exponential factor of PP‐LDPE blend with DAP matrix, was studied. The kinetics of the thermal degradation of composites was investigated by thermogravimetric analysis in dynamic nitrogen atmosphere at different heating rates. TG curves showed that the thermal decomposition of composites occurred in one weight‐loss stage. The apparent activation energies of thermal decomposition for composites, as determined by the Tang method (TM), the Kissinger–Akahira–Sunose method (KAS), the Flynn–Wall–Ozawa method (FWO), and the Coats–Redfern (CR) method were 156.6, 156.0, 159.8, and 167.7 kJ.mol^?1 for the thermal decomposition of composite with 5 wt% CaCO₃, 191.5, 190.8, 193.1, and 196.8 kJ.mol^?1 for the thermal decomposition of composite with 10 wt% CaCO₃, and 206.3, 206.1, 207.5, and 203.8 kJ mol^?1 for the thermal decomposition of composite with 20 wt% CaCO₃, respectively. The most likely decomposition process for weight‐loss stages of composites with CaCO₃ content 5 and 10 wt% was an A_n sigmoidal type. However, the most likely decomposition process for composite with CaCO₃ content 20 wt% was an R_n contracted geometry shape type in terms of the CR and master plots results. It was also found that the thermal stability, activation energy, and thermal decomposition process were changed with the increase in the CaCO₃ filler weight in composite structure. Copyright © 2009 John Wiley & Sons, Ltd.     

Effect of unsaturated hydroxyl-fatty acid modified nano-CaCO3 on the morphological and rheological behavior of PP

A modified nano-calcium carbonate (R-CCR) was prepared by coating a layer of unsaturated hydroxylfatty acid on the surface of CCR powders using a solid state method; the latter were commercial nano-CaCO₃ modified with stearic acid. FTIR studies indicate that the modifier is combined on the surface of CaCO₃. PP/EPDM/nano-CaCO₃ ternary composites were prepared by a melt-mixing method. SEM and TEM were utilized to examine the morphology of the composites. The tensile fractured surface of PP/EPDM/R-CCR showed a fibroid morphology and large-scale yield deformation. The impact fractured surface showed that the amount of cavities in the PP/EPDM/R-CCR system was increased, however their size diminished obviously. R-CCR particles were dispersed uniformly in the PP matrix, and their compatibility was distinctly improved as compared to CCR when the amount of R-CCR was 15 h⁻¹. The tensile strength remained nearly constant (reduced from 27.6 MPa to 27.5 MPa), while the impact strength increased from 9.6 kJ/m² to 15.4 kJ/m² as CCR was replaced by R-CCR. Meanwhile, the bending strength and bending modulus also increased correspondingly. Furthermore, the impact strength of PP/EPDM/R-CCR was maintained at a high level (15.4 kJ/m²), which was more than the sum of that of PP/EPDM and PP/R-CCR (6.6 kJ/m² and 6.1 kJ/m² respectively). This indicates that the R-CCR and EPDM have a significant synergistic toughening effect on PP while maintaining the strength and modulus of virgin PP. Both the storage modulus G′ and loss modulus G″ of PP/EPDM and PP/EPDM/R-CCR composites increase with increasing frequency, but the values of G′ and G″ of the tertiary composite are relatively higher than those of the binary system. The loss factor and viscosity decrease with increasing frequency, but there is little difference between tertiary and binary composites. The apparent viscosity η of the tertiary system containing R-CCR is lower than that of the tertiary system containing CCR and virgin PP. The viscosity of the composites sig-nificantly decreases with increasing shear rate. The mea-sured mechanical properties of the composites indicate that replacing CCR with R-CCR for binary composites could simultaneously enhance the toughness and strength of PP. __________ Translated from Acta Polymerica Sinica, 2008, 4 (in Chinese)     

Influence of CaCO<Subscript>3</Subscript> nanoparticles shape on thermal and crystallization behavior of isotactic polypropylene based nanocomposites

Summary The influence of calcium carbonate nanoparticles with different shapes (spherical and elongated) on the thermal properties and crystallization behavior of isotactic polypropylene was investigated. CaCO₃ nanoparticles were covered by an appropriate coating agent to improve the interfacial adhesion between the filler and the polyolefin matrix. The nanocomposites were prepared by melt mixing and subsequent compression molding. A remarkable effect of CaCO₃ on the thermal properties of iPP was observed. Moreover, the analysis of crystallization kinetics showed that CaCO₃ nanopowder coated with PP-MA are efficient nucleating agents for iPP, and the overall crystallization rate results higher than plain iPP.     

Covering of nanometric calcite with α-cyclodextrin

In the present experiments, the monodisperse calcium carbonate nanoparticles obtained in the reactor (three-phase reaction) with rotating discs have been covered with α-cyclodextrin. Both pure CaCO₃ nanoparticle and α-cyclodextrin-coated CaCO₃ powders were deeply analysed by the use of the scanning electron microscope, the dynamic light scattering and the thermogravimetric method. The experimental data have allowed for determination of effective diameter of the obtained particles (aggregates of ca. 30 nm single crystals) and their size distribution (almost monodisperse—ca. 390 nm) as well as for distinction between α-cyclodextrin molecules present on calcite surface or free α-cyclodextrin molecules if presented in the sample. It was found that the nanometric CaCO₃ obtained in the reactor with rotating discs can be covered with a maximum of 1.15% α-cyclodextrin monolayer. The maximal coverage of the CaCO₃ calcite particles with α-cyclodextrin can be done by 24-h shaking of 50 mg nanometric calcium carbonate with 25 mg of 36.79 mM α-cyclodextrin aqueous solution.

     

Morphology development in thermoplastic vulcanizates (TPV): Dispersion mechanisms of a pre-crosslinked EPDM phase

The fragmentation and dispersion in molten polypropylene (PP) of several pre-crosslinked and plasticized ethylene–propylene–diene terpolymer (EPDM) networks was studied. Thus, the morphologies and mechanical properties of PP/EPDM blends having similar compositions but made from either un-crosslinked, pre-crosslinked or dynamic-crosslinked EPDMs were compared. The results first highlight the importance of the gel fraction of the pre-crosslinked EPDMs, as well as the impact of the thermoplastic matrix proportion on the quality of the dispersion of such networks. As a result, pre-crosslinked EPDM having a gel fraction below g_EPDM = 0.7 can be finely and homogeneously fragmented and dispersed in presence of PP. It can be then admitted a collision–coalescence–separation type erosion mechanism of the EPDM domains. Nevertheless, contrarily to some theoretical model expectations, a partial fragmentation of the chemical networks was always observed even at very high crosslink density (g_EPDM > 0.7). Finally, the blends crosslinked under shearing (dynamic-crosslinked) showed a clear mechanical property synergy due to their fine and homogeneous morphology coupled with the full crosslinking of the elastomer. In the end, these results brought significant information on TPV morphology stabilization and their related mechanical properties.     

Studies of thermally stimulated current in polypropylene/calcium carbonate/surfactant systems

Thermally stimulated polarization (TSP) and depolarization (TSD) experiments have been performed with two grades of polypropylene and some respective CaCO₃-filled composites containing small amounts of nonionic surfactant (0–2 wt%). The effects of electrode blocking, electrode materials on the thermally stimulated currents, and reproducibility of the measurements have been studied. The effect of water vapor adsorbed from the ambient air on the AC dielectric properties and on the thermally stimulated polarization behavior has been determined.The addition of either CaCO₃ or surfactant to PP decreases the intensity of the _c depolarization current peak in the pre-melting region, while the presence of both components increases the current. Partial discharges are present in poly propylene/CaCO₃ composites under high voltages if neither water vapor nor a coherent surfactant layer is present at the matrix/filler interface.A short literature survey is presented on the TSC studies of polyolefins and their composites, and various mechanisms responsible for the observed changes are discussed, including interfacial polarization, trap redistribution through nucleation, and oriented adsorption.     

A multiple approach in determination of interfacial tension of biodegradable melt-mixed PBAT/EVOH blends: Correlation of morphology,rheology and mechanical properties

The interfacial tension of biodegradable melt-mixed blends of poly(butylene adipate-co-terephthalate), PBAT, and poly(ethylene-co-vinyl alcohol), (EVOH), was measured by breaking thread (BT), imbedded fiber retraction (IFR), and rheological methods. The PBAT-rich blends were prepared under different melt mixing conditions in order to investigate the effect of mixing conditions and possibility of reactive mixing between the blend components on the blend morphology, rheology, mechanical properties and interfacial tension values. The conditions were varied based on a Taguchi design of experiment using four factors namely EVOH content (0–30 wt%), mixing time (2–15 min), rotor speed (50–90 rpm), and mixing temperature (185–200 °C), each varying at three levels. The average size of EVOH droplets in PBAT matrix was determined for each blend by a field emission-scanning electron microscopy technique. The values of interfacial tension of PBAT/EVOH were found to be 2.57 ± 0.22 and 2.73 ± 0.30 mN m⁻¹ by the BT and IFR methods, respectively. The Palierne, Gramespacher, and Bousmina models were fitted to the rheological data to verify the interfacial tension of the blends. The continuous relaxation spectrum of the blends was determined in order to obtain the relaxation time of the EVOH droplets in the PBAT matrix. The Taguchi analysis revealed that the most effective factor is the EVOH content, and other factors do not play a significant role in the ultimate properties of the blends. Finally, based on the obtained mechanical properties, the possibility of reactive mixing under the applied mixing conditions was ruled out by means of repeated differential scanning calorimetry (DSC) and rheological measurements.     

Effects of coating amount and particle concentration on the impact toughness of polypropylene/CaCO3 nanocomposites

The effects of the coating amount of surfactant and the particle concentration on the impact strength of polypropylene (PP)/CaCO₃ nanocomposites were investigated. Nanocomposites prepared with monolayer-coated CaCO₃ nanoparticles had the best mechanical properties, including Young’s modulus, tensile yield stress and impact strength because of the good dispersion of the nanoparticles in the polymer matrix. In addition, the good dispersibility of the monolayer-coated nanoparticles allowed us to study the effects of particle concentration on the impact strength of the nanocomposites. H-PP and E-PP, which were the low and high molecular weight PPs, respectively, were used as polymer matrices. Critical particle concentrations of 10 and 25 wt% corresponding to an abrupt increase in the impact toughness were determined for the E-PP and H-PP nanocomposites, respectively. Good particle dispersion in a polymer matrix is the prerequisite for the calculation of the critical ligament thickness using the critical particle concentration. We propose that the observed critical ligament thickness actually corresponds to the critical thickness at which the plane-strain to plane-stress transition occurs. In addition, the critical ligament thickness of a nanocomposite depends on the properties of the polymer matrix, such as molecular weight, even for a given type of polymer.     

ELECTRICAL RESISTIVITY, CRYSTALLIZATION AND MECHENICAL PROPERTIES OF POLYPROPYLENE/MULTI-WALLED CARBON NANOTUBE/CALCIUM CARBONATE COMPOSITES PREPARED BY MELT MIXING

 Polypropylene (PP)/multi-walled carbon nanotube (MWCNT)/calcium carbonate (CaCO₃) composites are prepared by melt mixing using two types of CaCO₃ of different sizes. The electrical resistivities of the composites with the two types of CaCO₃ are all lower than those of the corresponding PP/MWCNT composites at various MWCNT loadings (1 wt%-5 wt%). The morphology of the composites is investigated by field emission scanning electron microscopy (FESEM). The crystallization behavior of PP in the composites is characterized by differential scanning calorimetry (DSC). The storage modulus, as measured by dynamic mechanical analysis (DMA), increases significantly by the presence of CaCO₃.     

New (PP/EPR)/nano‐CaCO3 based formulations in the perspective of polymer recycling. Effect of nanoparticles properties and compatibilizers

Phase structure of composite polypropylene (PP)/ethylene–propylene–rubber (EPR)/coated nano‐CaCO₃ composites, used in the manufacture of bumpers, with and without compatibilizers has been investigated using scanning electron microscopy (SEM), dynamic mechanical analysis (DMA) mechanical tests, and differential scanning calorimetry (DSC). Blends of various compositions were prepared using a corotating twin‐screw extruder. The experimental results indicated that the dispersion of nanoparticles in (PP/EPR) depends on their surface (stearic acid and fatty acid coatings). In both cases, the final morphology is the core–shell structure in which EPR acts as the shell part encapsulating coated nano‐CaCO₃. In this case, EPR‐g‐MAH copolymer does not improve the interface between (PP/EPR) and nanoparticles but PEP propylene ethylene copolymer should be preferentially localized at the interface of PP and (EPR/nano‐CaCO₃) phases generating an improved adherence, which will ensure a better cohesion of the whole material. According to the nature of the compatibilizers and surface treatment, it is believed that the synergistic effect of both the EPR elastomer and CaCO₃ nanoparticles should account for the balanced performance of the ternary composites. Copyright © 2009 John Wiley & Sons, Ltd.     

Assessment of corrosion protection and performance of bio-based polyurethane acrylate incorporated with nano zinc oxide coating

In this study, a series of UV-curable anticorrosive PUA coatings embedded with varying concentrations of inorganic ZnO fillers have been successfully prepared from jatropha-based polyol. The electrochemical impedance spectroscopy (EIS) and Tafel polarisation analysis revealed that increasing fillers composition lead to the improvement of the anticorrosive property of the hybrid coatings. Meanwhile, the salt spray test results were found to correlate with the EIS of C_c (F cm⁻²) was 2.71 × 10⁻⁹, Bode plot - 10⁶ Ω cm² and Tafel polarisation results 7.56 × 10⁻⁶ MPY at 3 wt% of ZnO. Physical properties of 3 wt% loading of ZnO fillers in hardness test obtained 6H which was strongly attributed to the low interfacial interaction and poor dispersion of the fillers within the polymer matrix.     

Uncross‐linked polypropylene (PP)/ethylene‐propylene‐diene (EPDM)/multi walled carbon nanotube (MWCNT) and dynamically vulcanized PP/EPDM/MWCNT nanocomposites

In this study, relatively large amounts of polypropylene (PP), ethylene‐propylene‐diene (EPDM), and multi‐walled carbon nanotube (MWCNT) were melt‐mixed with and without DCP. Dynamically vulcanized PP/EPDM (TPV)/MWCNT nanocomposites were prepared by two methods: the MWCNTs were added either before or after the dynamic vulcanization of the blends. The effects of composition, rotor speed, and dynamic vulcanization on their surface resistivity were investigated. The surface resistivity of uncross‐linked PP/EPDM/MWCNT nanocomposites increases with increasing the content of EPDM. At PP/EPDM (70/30 wt%) nanocomposite with 1.5 phr MWCNT, slightly lower surface resistivity is obtained by increasing the rotor speed during mixing. However, for PP/EPDM (50/50 wt%) and PP/EPDM (30/70 wt%) nanocomposites, surface resistivity decreases with increasing the rotor speed from 30 to 60 rpm. But further increase in rotor speed (90 rpm) leads to an increase of surface resistivity. When the MWCNTs were added after the dynamic vulcanization of the blends, the surface resistivity of TPV70/MWCNTnanocomposite is lower than that of uncross‐linked PP/EPDM/MWCNT nanocomposite. However, when the MWCNTs were added before the dynamic vulcanization of the blends, the surface resistivity of TPV70/MWCNT nanocomposite is >10¹² Ω/square. Copyright © 2010 John Wiley & Sons, Ltd.     

PMMA Based Nanocomposites Filled with Modified CaCO3 Nanoparticles

PMMA based nanocomposites filled with calcium carbonate nanoparticles (CaCO₃) have been prepared by in situ polymerization approach. In order to improve inorganic nanofillers/polymer compatibility, PBA chains have been grafted onto CaCO₃ nanoparticle surface. Morphological analysis performed on nanocomposite fractured surfaces has revealed that the CaCO₃ modification induces homogeneous and fine dispersion of nanoparticles into PMMA as well as strong interfacial adhesion between the two phases. Mechanical tests have shown that both unmodified and modified CaCO₃ are responsible for an increase of the Young's Modulus, whereas only PBA-grafted nanoparticles allow to keep unchanged impact strength, strongly deteriorated by adding unmodified CaCO₃. Finally, the presence of CaCO₃ nanoparticles significantly improves the abrasion resistance of PMMA also modifying its wear mechanism.