Thiazolylhydrazone dervatives as inhibitors for insect N-acetyl-β-d-hexosaminidase and chitinase

Insect chitinase and N-acetyl-β-d-hexosaminidases (Hex) are potential targets for developing new pesticides. Here, a series of thiazolylhydrazones I (with substituted group R₁ at N3) and II (with substituted group R₁ at N2) were designed, synthesised and evaluated as competitive inhibitors of OfHex1 and OfChi-h, from the agricultural pest Ostrinia furnacalis. Derivatives I-3d and II-3d, with phenoxyethyl group at R₁, demonstrated the best inhibitory activities against OfHex1 and OfChi-h. Molecular docking analysis indicated that the branched conformation compound II-3d (K_i = 1.5 μmol/L) formed more hydrogen bonds with OfHex1 than the stretched conformation compound I-3d (K_i = 5.9 μmol/L). The differences in compounds’ binding conformations with OfChi-h explained differences in inhibitory activity of compounds I-3d (K_i = 1.9 μmol/L) and II-3d (K_i = 4.1 μmol/L). This work suggests a novel scaffold for developing specific Hex and Chi-h inhibitors.     

Effects of stress ratio on fatigue crack growth of thermoset epoxy resin

The influences of stress ratio (R) on fatigue crack growth (FCG) of thermoset epoxy resin with polyamine hardener were investigated. The FCG growth rates (da/dN) have been correlated by the linear-elastic fracture mechanics parameters (ΔK and K_max), and nonlinear-elastic fracture mechanics parameter (ΔJ). The effects of R on FCG were observed when the ΔK and ΔJ were used as fracture mechanics parameters for FCG. However, the K_max successfully characterized FCG under cyclic-dependent condition (FCGs at R = 0.1 and 0.4); but it failed to characterize the FCG under time-dependent condition (FCG at R = 0.7). As a time-dependent fracture mechanics parameter, C* was applied to correlate the time-dependent FCG rate (da/dt). A reasonable agreement was obtained between time-dependent FCG (R = 0.7) and creep crack growth (CCG) results.     

Specific ion effects on the surface tension and surface potential of aqueous electrolytes

The phenomena of electrolytes affecting the surface tension of aqueous solutions and producing measurable surface potentials are reviewed in the light of recent studies of them. The factual information presented includes the molar ionic surface tension increments k_i = lim(c_i → 0)(dσ / dc_i) of many ions and the surface potential increments ∆ χ = χ_E − χ_W of electrolytes involving the cations H⁺, Na⁺, K⁺, and NH₄⁺ and various anions. Gaps in the data that invite filling and inconsistencies in reported data are pointed out. Correlations of k_i with several properties of the ions that should be relevant to their specific effects: their sizes, quantities representing their polarizabilities, their effects on the structure of the water and the binding of water molecules by them, are presented. Correlations of the surface potential increment ∆ χ with the electrolyte surface tension increments and with the differences between the cation and anion increments are shown. Models recently proposed for the rationalization of the observed phenomena and relevant theoretical developments are shown and discussed. The paradox of hydrogen ions not promoting significant charge separation at the interface but yielding large surface potentials is emphasized.     

The novel Cs4Nb6F8.5I3.5I6 octahedral niobium cluster fluoro-iodide: a step towards the Nb6F12 cluster core excision

The solid state synthesis of Cs₄Nb₆Fⁱ_8.5Iⁱ_3.5I^a₆ starting from Nb₆F₁₅ binary fluoride, as well as its crystal structure determined by X-ray single crystal diffraction, are presented in this work. This novel cluster compound is based on a Nb₆Iⁱ₃Fⁱ₆Lⁱ₃I^a₆ (L=F, I) discrete unit and crystallizes in the monoclinic system (space group C2/m; Z=4 ; a=10.4363(4) Å, b=18.1227(7) Å, c=19.5102(9) Å β=101.223(1)°, V=3619.5(3) Å³, R₁=0.057; wR₂=0.159). This halide is the first octahedral niobium cluster compound containing unshared terminal I^a ligands together with ordered μ₂-Iⁱ and μ₂-Fⁱ ligands on nine inner positions whilst the three last ones (Lⁱ) are slightly affected by a I/F random occupancy. The structural findings are discussed and compared with those of Nb₆F₁₅, Nb₆I₁₁, CsNb₆I₁₁ and the fluorochlorides and fluorobromides recently reported.     

Nanoscale heterogeneities in radiation-cured diacrylate networks: Weakness or asset?

The crosslinking polymerization of multifunctional monomers is known to yield brittle matrices, therefore limiting the development of this technique for the production of high performance composite materials. Among the various possible causes of the brittleness, the spontaneous formation of nanoheterogeneities during radiation-initiated polymerization is supported by atomic force microscopy imaging and by calorimetric analyses. The controlled polymerization-induced phase separation of nanosized clusters of polyethersulfone was evaluated as a means for alleviating the inherent tendency of the diacrylate materials to fragile failure. Various homogeneous formulations including the aromatic diacrylate monomers, and polyethersulfone together with a compatible reactive diluent were prepared and polymerized by electron beam irradiation. The resulting toughened materials show optimized critical stress intensity factor (K_Ic) over 2 MPa m^0.5, whereas the K_Ic value is about 1 MPa m^0.5 for the unmodified reference resin.     

Immobilization of trypsin in polyaniline-coated nano-Fe3O4/carbon nanotube composite for protein digestion

In this report, a four-component nanocomposite, trypsin-immobilized polyaniline-coated Fe₃O₄/carbon nanotube composite, was synthesized for highly efficient protein digestion. Fe₃O₄ was deposited by the chemical coprecipitation of Fe²⁺ and Fe³⁺ in an alkaline solution containing carbon nanotubes (CNTs) to prepare nano-Fe₃O₄/CNT composite. Subsequently, polyaniline (PA) was assembled on the Fe₃O₄/CNT composite by the in situ polymerization of aniline in the presence of trypsin to obtain trypsin-immobilized PA/Fe₃O₄/CNT nanocomposite. The novel 1D superparamagnetic biomaterial has been characterized by TEM, SEM, XRD, and magnetometric analysis. The feasibility and performance of the unique magnetic biomaterial have been demonstrated by the tryptic digestion of bovine serum albumin, myoglobin, and lysozyme within 5 min. The digests were identified by MALDI-TOF MS with sequence coverages that were comparable to those obtained from the conventional in-solution tryptic digestion. The present biocomposite offers considerable promise for protein analysis due to its high magnetic responsivity and excellent dispersibility. It can be easily isolated from the digests with the aid of an external magnetic field. Because the enzyme-immobilized nanocomposite can be prepared by a simple two-step deposition approach at low cost, it may find a wide range of biological applications including proteome research.     

Molecular interaction of organic dyes in bulk and confined media

Molecular interactions of five thiazine dyes with increasing alkyl substitution have been studied in aqueous and microemulsion media at 303 K within a concentration range of (1.35–7.00) × 10^?4 M. The dimerization constant (K_d) values for the five dyes are ranged between 1.761 and 6.258 × 10³ l mol^?1 in bulk water media, where as in microemulsion media, K_d's are ranged between 1.760 and 4.110 × 10³ l mol^?1. Thionine (with no methyl substitution) and azure A (with two methyl substitution) displayed slightly larger K_d values in microemulsion water pools compared to bulk water while other dyes recorded significant drop in K_d values. The influence of microemulsion media on the molecular interaction of dyes has been explained in terms of electrostatic and hydrophobic factors. The monomer and the dimer spectra are explained in terms of molecular exciton model and the optical absorption parameters of both the species are reported in bulk and confined media.     

Looking glass inhibitors: both enantiomeric N-benzyl derivatives of 1,4-dideoxy-1,4-imino-d-lyxitol [a potent competitive inhibitor of α-d-galactosidase] and of 1,4-dideoxy-1,4-imino-l-lyxitol [a weak competitive inhibitor of α-d-galactosidase] inhibit naringinase,an α-l-rhamnosidase competitively

Benzhydryl protection by diphenyldiazomethane of an alcohol in enantiomeric base-sensitive ribonolactones allows short efficient syntheses of 1,4-dideoxy-1,4-imino-d-lyxitol (DIL) and of 1,4-dideoxy-1,4-imino-l-lyxitol (LIL). DIL showed potent [K_i = 0.13 μM]—and LIL showed weak [K_i = 113 μM]—competitive inhibition of α-d-galactosidase. Both enantiomers N-benzyl-DIL [K_i = 64 μM] and N-benzyl-LIL [K_i = 13 μM] were moderate competitive inhibitors of naringinase, an α-l-rhamnosidase.     

A dual-wavelength resonance light scattering ratiometry of biopolymer by its electrostatic interaction with surfactant

A dual-wavelength resonance lighting scattering (DW-RLS) ratiometry is developed to detect anion biopolymer based on their bindings with cation surfactant. Using the interaction of Hyamine 1622 (HM) with fish sperm DNA (fsDNA) as an example, a dual-wavelength resonance light scattering (DW-RLS) ratiometric method of DNA was constructed. In Britton-Robinson buffer controlled medium, fish sperm DNA (fsDNA) could interact with Hyamine 1622 (HM), displaying significantly enhanced RLS signals. By measuring the RLS signals characterized at 300.0 nm (I_300.0) and the RLS intensity ratio (I_276.0/I_294.0), respectively, fsDNA over a wide dynamic range of content could be detected. Typically, when HM concentration is kept at 6.0 × 10⁻⁵ mol l⁻¹, using I_300.0 could detect fsDNA over the range of 50-2000 ng ml⁻¹ with the limit of 3.0 ng ml⁻¹, while using I_276.0/I_294.0 could detect fsDNA over the range of 0.5-2500 ng ml⁻¹ with the limit of 0.05 ng ml⁻¹. Thus the latter so-called DW-RLS ratiometry is obviously superior to the former one. Based on the measurements of I_300.0 and I_276.0/I_294.0 data, a Scatchard plot concerning the interaction between HM and fsDNA could be constructed and thus the binding number (n) and binding constant (K) could be available with the values of 13.5 and 1.35 × 10⁵ mol⁻¹ l, and 11.9 and 1.65 × 10⁵ mol⁻¹ l, respectively.     

Application of inorganic sorbents for removal of Cs, Sr, Pu and Am from contaminated solutions

A sorption ability of titanium silicates (TiSi) and iron oxides towards Cs, Sr, Pu and Am was tested using the laboratory batch method. The obtained results are expressed as distribution coefficients (K_d). TiSi synthesised using TiOSO₄ revealed better sorption ability towards all studied radionuclides in comparison with TiSi produced on the basis of TiCl₄. The K_d values ranged from 3.9 × 10² to 1.6 × 10⁵ mL g⁻¹ for Sr, from 6 to 4.1 × 10⁴ mL g⁻¹ for Cs, from 2.2 × 10² to 2.6 × 10⁵ mL g⁻¹ for Pu and from 50 to 1.6 × 10⁴ mL g⁻¹ for Am. The highest Pu K_d values (9 × 10³–6.2 × 10⁴ mL g⁻¹) and better kinetics were found for iron oxides.     

Sorption of 14C, 99Tc, 137Cs, 90Sr, 63Ni, and 241Am onto a rock and a fracture-filling material from the Wolsong low- and intermediate-level radioactive waste repository, Gyeongju, Korea

Sorption experiments for radionuclides such as ¹⁴C, ⁹⁹Tc, ¹³⁷Cs, ⁹⁰Sr, ⁶³Ni, and ²⁴¹Am were conducted using two different groundwaters (GM-1 and SS-5) and solid materials (granodiorite and fracture-filling material) sampled from the Wolsong low- and intermediate-level radioactive waste (LILW) repository, Gyeongju, Korea. The distribution coefficients of the radionuclides, K _d’s, were obtained and their sorption properties were discussed for each radionuclide. For all sorbing radionuclides, the K _d values for the fracture-filling material were observed to be higher than those for granodiorite regardless of the groundwater. The K _d values were increased in the sequence ⁹⁹Tc < ¹⁴C < ⁹⁰Sr < ¹³⁷Cs < ⁶³Ni < ²⁴¹Am regardless of sorbent types implying that the sorption of radionuclides onto geological media is affected by their chemical behavior in accordance with geochemical environments. Anionic radionuclides such as ¹⁴C and ⁹⁹Tc showed very low K _d values both for the granodiorite and fracture-filling material. The mineralogical composition of the geological media and groundwater conditions was also observed to be important in the sorption of sorbing radionuclides, especially in the case of strongly sorbing radionuclides.     

Biogenic fabrication of silver nanoparticles,oxidative dissolution and antimicrobial activities

Metallic silver nanoparticles (AgNPs) were prepared by using Foeniculum vulgare Mill seeds extract. The silver nitrate was used as silver precursor in an aqueous solution. The photooxidative dissolution of AgNPs with persulfate (K₂S₂O₈) under UV light was investigated. Effects of initial concentration of K₂S₂O₈, AgNPs, initial solution pH, and temperature were studied on dissolution of AgNPs. The 100% AgNPs dissolution was achieved in 60 min under typical conditions (pH = 4.0, 1.2 mM K₂S₂O₈, and 30 ⁰C). The experimental results showed higher temperature brought faster dissolution rate, and the activation energy was 65.2 kJ/mol. The effects of ethanol, tertiary butanol, and nitrobenzene were studied to establish the role of SO₄^? and HO radical species. AgNPs dissolution was inhibited by Cl^?, Br^?, I^?, and NO₃^? ions. Staphylococcus auerus (s. aureus), Escherichia coli (E. coli) and Candida albicans (C. albicans) were the effective human pathogens against the AgNPs. The lag phase, growth kinetics, minimum bactericidal concentration, death rate, and antimicrobial efficacy depend on the concentration of AgNPs.     

Reversible carbon–boron bond formation at platinum centers through σ-BH complexes

A reversible carbon–boron bond formation has been observed in the reaction of the coordinatively unsaturated, cyclometalated, Pt(ii) complex [Pt(I^tBuⁱPr′)(I^tBuⁱPr)][BAr^F], 1, with tricoordinated boranes HBR₂. X-ray diffraction studies provided structural snapshots of the sequence of reactions involved in the process. At low temperature, we observed the initial formation of the unprecedented σ-BH complexes [Pt(HBR₂)(I^tBuⁱPr′)(I^tBuⁱPr)][BAr^F], one of which has been isolated. From −15 to +10 °C, the σ-BH species undergo a carbon–boron coupling process leading to the platinum hydride derivative [Pt(H)(I^tBuⁱPr–BR₂)(I^tBuⁱPr)][BAr^F], 4. Surprisingly, these compounds are thermally unstable undergoing carbon–boron bond cleavage at room temperature that results in the 14-electron Pt(ii) boryl species [Pt(BR₂)(I^tBuⁱPr)₂][BAr^F], 2. This unusual reaction process has been corroborated by computational methods, which indicate that the carbon–boron coupling products 4 are formed under kinetic control whereas the platinum boryl species 2, arising from competitive C–H bond coupling, are thermodynamically more stable. These findings provide valuable information about the factors governing productive carbon–boron coupling reactions at transition metal centers.

A reversible carbon–boron bond formation has been observed in the reaction of the coordinatively unsaturated, cyclometalated, Pt(ii) complex [Pt(I^tBuⁱPr′)(I^tBuⁱPr)][BAr^F], 1, with tricoordinated boranes HBR₂.     

Judd–Ofelt analysis and photoluminescence properties of RE3+ (RE = Er & Nd): Cadmium lithium boro tellurite glasses

Rare earth (Er³⁺ and Nd³⁺) ions doped cadmium lithium boro tellurite (CLiBT) glasses were prepared by melt quenching method. The vis–NIR absorption spectra of these glasses have been analyzed systematically. Judd–Ofelt intensity parameters Ω_λ (λ = 2, 4, 6) have been evaluated and used to compute the radiative properties of emission transitions of Er³⁺ and Nd³⁺: CLiBT glasses. From the NIR emission spectra of Er³⁺: CLiBT glasses a broad emission band centered at 1538 nm (⁴I_13/2 → ⁴I_15/2) is observed and from Nd³⁺: CLiBT glasses, three NIR emission bands at 898 nm (⁴F_3/2 → ⁴I_9/2), 1070 nm (⁴F_3/2 → ⁴I_11/2) and 1338 nm (⁴F_3/2 → ⁴I_13/2) are observed with an excitation wavelength λ_exci = 514.5 nm (Ar⁺ Laser). The FWHM and stimulated emission cross-section values are calculated for Er³⁺ and Nd³⁺: CLiBT glasses. FWHM × σ_e^P values are also calculated for Er³⁺: CLiBT glasses.     

Synthesis,crystal structure,and magnetic properties of the oxometallates KBaMnO4 and KBaAsO4

Single crystals of KBaMnO₄ and KBaAsO₄ were grown using the hydroflux method and characterized by single crystal X-ray diffraction. Both compounds crystallize in the orthorhombic space group Pnma with a = 7.7795(4) Å, b = 5.8263(3) Å, and c = 10.2851(5) Å for the manganate and a = 7.7773(10) Å, b = 5.8891(8) Å, and c = 10.3104(13) Å for the arsenate. The materials exhibit a three-dimensional crystal structure consisting of isolated MnO₄³⁻ or AsO₄³⁻ tetrahedra, with the charge balance maintained by K⁺ and Ba²⁺. Each tetrahedron is surrounded by six K⁺ and five Ba²⁺, and shares its corner/edge with KO₁₀ polyhedra and corner/edge/face with BaO₉ polyhedra, respectively. The crystal growth, crystal structure and magnetic properties are discussed.     

Complex formation equilibria of phosphocreatine with sodium,potassium and magnesium ions

The formation of complexes between phosphocreatine, H₂O₃PNHC(NH)N(CH₃)CH₂CO₂H, and the ions Na⁺, K⁺ and Mg²⁺ have been investigated under physiological conditions (aqueous solution, T=37 °C and I=0.25 mol dm⁻³) by means of ³¹P NMR spectroscopy. Only 1:1 complexes have been identified. Stability constants have been determined with the aid of the new computer program hypnmr-2000. log₁₀ K values were found to be−0.5(2),−0.3(2) and 1.43(3), respectively. The formation constant for the potassium complex is two orders of magnitude less that the literature value.     

Dynamic viscosity versus probe-reported microviscosity of aqueous mixtures of poly(ethylene glycol)

Correlation between the dynamic viscosity (η) and the microviscosity of a hybrid green medium constituted of water and poly(ethylene glycol) (PEG) of average molar mass (200, 400, and 600) g · mol^?1, respectively, is explored over the temperatures range (10 to 90) °C across the complete composition regime. The microviscosity is obtained using a fluorescence probe 1,3-bis-(1-pyrenyl)propane (BPP), which is manifested through the ratio of the monomer-to-intramolecular excimer intensities (I_M/I_E). Aqueous PEG mixtures are observed to behave similar to Newtonian fluids as the temperature dependence of dynamic viscosity follows Arrhenius-type behavior. Surprisingly, a simple and convenient linear dependence of ln η with wt% PEG of the mixture is established. The BPP I_M/I_E is observed, in general, to increase with the bulk dynamic viscosity of the mixture having >10 wt% PEG suggesting a good correlation between the bulk dynamic viscosity and BPP-reported microviscosity when the viscosity of the aqueous PEG mixture is relatively high.     

A New Semi-conductive Copper(I) Halide Coordination Polymer: Synthesis, Structure, and Theoretical Study

Abstract  A 1-D hybrid copper(I) halides, [(phen)Cu₃I₃] _n (phen = 1,10-phenanthroline)(1) with novel D6R (double six-membered rings) Cu₆I₆ cores, was synthesized by solvothermal reaction and characterized by single-crystal X-ray diffraction. In 1, nitrogen atoms from phen replace two I of CuI₄ tetrahedron to give distorted tetrahedral geometries (CuI₂N₂), then CuI₂N₂ tetrahedron shares corners via μ₃-I to generate an extended 1-D zigzag chain. Two zigzag chains combines with one 1-D (Cu₄I₄) _n chain containing D6R cores via μ₃-I-Cu (from cores) bonds to form the infinite 1-D ribbonlike polymer along the a-axis. Furthermore, the title compound is stabilized by conspicuous C–H···I hydrogen bonds, π–π and d¹⁰–d¹⁰ metallic interactions. Experimental and theoretical optical property investigation indicates that 1 possesses semiconductor property. DFT calculation was executed to probe the electronic structure of 1. To our interest, phen act as a property control species with its π* electrons appear in the forbidden band. Graphical Abstract  A hybrid copper(I) halides [(phen)Cu₃I₃] _n containing D6R cores was structurally determined, which was stabilized by conspicuous C–H···I hydrogen bonds, π–π and d¹⁰–d¹⁰ metallic interactions and possesses semiconductor property. DFT calculation indicate phen act as a property control species with its π* electrons appear in the forbidden band. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

The conversion of alkynes into substituted cyclopropanes effected by CH2I2-R3Al (R = Me, Et, i-Bu)

The reaction of mono- and disubstituted alkynes with CH₂I₂-R₃Al (R = Me, Et, i-Bu) was studied. It was found that the reaction of alkynes with CH₂I₂ in the presence of Me₃Al gives β-iodoethyl-substituted cyclopropanes. The use of Et₃Al or i-Bu₃Al affords exclusively cyclopropylic organoaluminum compounds.     

Inclusional association as studied by the drying dissipative structure. Part 2. Drying pattern of n-alkyltrimethylammonium bromide

Macro- and microscopic drying patterns were observed on a cover glass and a watch glass during the course of dryness of aqueous solutions of a series of n-alkyltrimethylammonium bromides (alkyl: n-decyl, n-dodecyl, n-tetradecyl, and n-hexadecyl). The broad rings formed at the outside edges of the macroscopic patterns. Size of the initial liquid on the substrates, d _i, that of the final broad ring, d _f, and the ratio, d _f/d _i, changed as the surfactant concentration changed, and there appeared a bending point in each curve, which was found to correspond to the critical micelle concentration (cmc) of the surfactant. The cmc values evaluated from the d _i, d _f, and d _f/d _i values agreed well with the reference values reported previously. Cooperative drying processes of the convection, sedimentation, and solidification were supported. Microscopic drying patterns such as rod-like, dendritic, and granule-like patterns were observed, and they changed as a function of the carbon number of the alkyl groups, surfactant concentration, and the distance from the center of the pattern.