Turbulence Budgets in Buoyancy-affected Vertical Backward-facing Step Flow at Low Prandtl Number

The paper investigates buoyancy impact on the vertical flow over a backward-facing step at low Prandtl number by Direct Numerical Simulation. In particular, the very low Prandtl number of liquid sodium, 0.0088, is considered in the regime of mixed convection, i.e. for Richardson numbers below unity. The effects of buoyancy on mean flow, heat transfer and turbulence are assessed. Buoyancy is found to attenuate recirculation and, consequently, increase heat transfer. Turbulence is decreased in the attached boundary layer for moderate buoyancy impact but surpasses the levels found in forced convection at the largest Richardson number investigated. Beyond the mean flow and second moments, the budgets of turbulent kinetic energy, Reynolds shear stress, temperature variance, and turbulent heat flux components are studied and related to the alterations in the mean field quantities. Due to scale separation, production and dissipation nearly balance for temperature variance while this is not the case for turbulent kinetic energy. Similar findings for the turbulent heat fluxes show that the correlation between temperature and pressure gradient is the most important contribution to the budget aside from production and dissipation. In addition to the physical insight into this flow, the data presented may be used for the validation and improvement of turbulence models for liquid metal flows.     

The effects of transpiration on the boundary layer flow and heat transfer over a vertical slender cylinder

This paper deals with a theoretical (numerical) analysis of the effects that blowing/injection and suction have on the steady mixed convection or combined forced and free convection boundary layer flows over a vertical slender cylinder with a mainstream velocity and a wall surface temperature proportional to the axial distance along the surface of the cylinder. Both cases of buoyancy forces aid and oppose the development of the boundary layer are considered. Similarity equations are derived and their solutions are dependent upon the mixed convection parameter, the non-dimensional transpiration parameter and the curvature parameter, as well as of the Prandtl number. Dual solutions for the previously studied mixed convection boundary layer flows over an impermeable surface of the cylinder are shown to exist also in the present problem for aiding and opposing flow situations.     

Similarity solutions of mixed convection heat and mass transfer in combined stagnation and rotation-induced flows over a rotating disk

The objective of the present study is to develop a novel similarity model for analysis of mixed convection heat and mas transfer in combined stagnation and rotation-induced flows over a rotating disk. Thermal and concentration (solutal) buoyancy effects stemmed from temperature and concentration gradients in rotational as well as gravitational forces fields are all taken into account. The influences of the forced flow, disk rotation, thermal buoyancy, buoyancy ratio and the fluid properties, i.e. Prandtl and Schmidt numbers, on the flow, temperature and concentration fields and the associated friction factors, heat and mass transfer rates are investigated. The present results reveal the effects of various buoyancy modes with combined forces on the transport phenomena in rotating-disk flows, and the analysis is also useful in understanding the mechanisms of mixed convection in the class of rotating fluids. Received on 30 December 1997     

Forced and mixed convection boundary layer flow along a flat plate with variable viscosity and variable Prandtl number: new results

The steady laminar boundary layer flow along a flat plate is studied taking into account the variation of fluid viscosity and fluid Prandtl number with temperature. In the forced convection case the plate moves with constant velocity and its temperature varies in power law with x. In the mixed convection case the plate temperature is constant and the fluid moves upwards due to an external free stream and due to buoyancy forces. The results are obtained with the direct numerical solution of the boundary layer equations. The study concerns the wall heat transfer, the wall shear stress and velocity and temperature profiles across the boundary layer. The results of the present work are different from those existing in the literature, which have been obtained with the assumption of constant Pr number.     

Comprehensive correlations for laminar mixed convection on vertical and horizontal flat plates

This paper presents comprehensive correlation equations of the local Nusselt numbers and surface shear stresses for laminar forced convection, natural convection, and mixed convection on vertical and horizontal flat plates which are maintained with uniform wall temperature or uniform surface heat flux. The correlation for pure forced convection and pure natural convection are very accurate for any Prandtl number between 0.001 and infinity. The correlations for mixed convection coincide very well with the numerical results over the entire regimes of mixed convection intensity and Prandtl number for the eight cases of the two plates with distinct thermal boundary conditions and buoyancy-assisting and-opposing flow conditions.     

Convective heat transfer from a rotating or nonrotating axisymmetric body

An analysis of steady laminar mixed-convection heat transfer from a rotating or nonrotating axisymmetric body is presented. A mixed-convection parameter is proposed to serve as a controlling parameter that determines the relative importance of the forced and the free convection. In addition, a rotation parameter is introduced to indicate the relative contributions of the flow forced convection and the rotational forced convection. The values of both these two parameters lie between 0 and 1. Furthermore, the coordinates and dependent variables are transformed to yield computationally efficient numerical solutions that are valid over the entire range of mixed convection from the forced-convection limit (rotating or nonrotating bodies) to the pure free-convection limit (non-rotating bodies) and the entire regime of forced convection from the pure flow forced-convection limit (nonrotating bodies) to pure rotational forced-convection limit (rotating bodies). The effects of mixed-convection intensity, body rotation, fluid suction or injection, and fluid Prandtl number on the velocity profiles, the temperature profiles, the skin-friction parameter, and heat transfer parameter are clearly illustrated for both cases of buoyancy assisting and opposing flow conditions.     

Mixed convection flow over a vertical wedge embedded in a highly porous medium

 The steady mixed convection flow over a vertical wedge with a magnetic field embedded in a porous medium has been investigated. The effects of the permeability of the medium, surface mass transfer and viscous dissipation on the flow and temperature fields have been included in the analysis. The coupled nonlinear partial differential equations governing the flow field have been solved numerically using the Keller box method. The skin friction and heat transfer are found to increase with the parameters characterizing the permeability of the medium, buoyancy force, magnetic field and pressure gradient. However the effect of the permeability and magnetic field on the heat transfer is very small. The heat transfer increases with the Prandtl number, but the skin friction decreases. The buoyancy force which assists the forced convection flow causes an overshoot in the velocity profiles. Both the skin friction and heat transfer increase with suction and the effect of injection is just the reverse. Received on 21 May 1999     

Numerical study of Prandtl effect on MHD flow at a lid‐driven porous cavity

In this paper, the lattice Boltzmann method is used to study the Prandtl number effect on flow structure and heat transfer rates in a magnetohydrodynamic flow mixed convection in a lid‐driven cavity filled with a porous medium. The right and left walls are at constant but different temperatures (θ_h and θ_c), while the other walls are adiabatic. Gallium and salt water (0.02 < Pr < 13.4) are used as samples of the electroconducting fluids in the cavity. Typical sets of streamlines and isotherms are presented to analyze the flow patterns set up by the competition among the forced flow created by the lid‐driven wall, the buoyancy force of the fluid and the magnetic force of the applied magnetic field. Mathematical formulations in the porous media were constructed based on the Brinkman–Forchheimer model, while the multidistribution‐function model was used for the magnetic field effect. Numerical results were obtained and the effects of the Prandtl number and the other effective parameters such as Richardson, Hartman, and Darcy numbers were investigated. It was found that the fluid fluctuations within the cavity were reduced by increasing the Hartman number. A similar pattern was observed for the Darcy number reduction. Heat transfer was essentially dominated by the conduction for the low Prandtl number and forced convection dominated as the Prandtl number increased. Also, the average Nusselt number was raised by increasing the Prandtl number. It was discovered that a remarkable heat transfer enhancement of up to 28% could be reached by increasing the Prandtl number (from 0.02 to 13.4) at constant Richardson and Darcy numbers. Copyright © 2011 John Wiley & Sons, Ltd.     

Convection regimes and heat transfer characteristics along a continuously moving heated vertical plate

The steady laminar flow and thermal characteristics of a continuously moving vertical sheet of extruded material are studied close to and far downstream from the extrusion slot. The velocity and temperature variations, obtained by a finite volume method, are used to map out the entire forced, mixed and natural convection regimes. The effects of the Prandtl number (Pr) and the buoyancy force parameter (B) on the friction and heat transfer coefficients are investigated. Comparisons with experimental measurements and solutions by others in the pure forced and pure natural convection regions are made. In the mixed convection region, the results are compared with available finite-difference solutions of the boundary layer equations showing excellent agreement. The region close to the extrusion slot is characterized as a non-similar forced-convection dominated region in which Nu_xRe_x^−1/2 drops sharply with increasing Richardson number (Ri_x). This is followed by a self-similar forced-convection dominated region in which Nu_xRe_x^−1/2 levels off with increasing Ri_x until the buoyancy effect sets in. The existence and extent of the latter region depend upon the value of B. A non-similar mixed convection region where increasing buoyancy effect enhances the heat transfer rate follows. Finally, this region is followed downstream by a self-similar natural-convection dominated region in which Nu_xRe_x^−1/2 approaches the pure natural convection asymptote at large Ri_x. Critical values of Ri_x to distinguish the various convection regimes are determined for different Pr and B.     

A numerical study of the longitudinal thermoconvective rolls in a mixed convection flow in a horizontal channel with a free surface

This paper presents a numerical study of three-dimensional laminar mixed convection within a liquid flowing on a horizontal channel heated uniformly from below. The upper surface is free and assumed to be flat. The coupled Navier–Stokes and energy equations are solved numerically by the finite volume method taking into account the thermocapillary effects (Marangoni effect). When the strength of the buoyancy, thermocapillary effects and forced convective currents are comparable (Ri ⋍ O(1) and Bd = Ra/Ma ⋍ O(1)), the results show that the development of instabilities in the form of steady longitudinal convective rolls is similar to those encountered in the Poiseuille–Rayleigh–Bénard flow. The number and spatial distribution of these rolls along the channel depend on the flow conditions. The objective of this work is to study the influence of parameters, such as the Reynolds, Rayleigh and Biot numbers, on the flow patterns and heat transfer characteristics. The effects of variations in the surface tension with temperature gradients (Marangoni effect) are also considered.     

Numerical investigation of flow and combined natural-forced convection from an isothermal square cylinder in cross flow

Unsteady flow and heat transfer from a horizontal isothermal square cylinder is studied numerically using a three-dimensional computational model to investigate the influence of buoyancy on the forced flow and heat transfer characteristics. The numerical model is based on a horizontal square cylinder subjected to laminar fluid flow in an unconfined channel. The governing equations in 3D form are solved using a fractional step method based on the finite difference discretization in addition to a Crank–Nicholson scheme employed to the convective and the viscous terms. Two working fluids–air (Pr = 0.7) and water (Pr = 7)–are considered, and the flow and heat transfer simulations were carried out for the Reynolds and Richardson numbers in the intervals 55 ≤ Re ≤ 250 and 0 ≤ Ri ≤ 2, respectively. The flow characteristics such as time-averaged drag/lift, rms drag/rms lift coefficients as well as Strouhal number were computed. The heat transfer from the cylinder is assessed by mean Nusselt number (and rms Nusselt number) over the total heated cylinder walls. As the buoyancy increases, the mass and the velocity of the fluid flowing underneath the cylinder increases. The fluid is injected into the near wake region with an upward motion which significantly alters the flow field in the downstream as well as upstream regions. The effects of Reynolds, Richardson and Prandtl numbers on the flow field and temperature distributions are discussed in detail. It is shown that the flow and heat transfer characteristics are influenced more for air than water. To fill the void in the literature, useful empirical correlations of practical importance are derived for pure forced and pure natural as well as mixed convection. The mixed convection correlations, in terms of the ratio of pure forced convection, are also developed, and their implications are discussed.     

3D Numerical study of the effect of aspect ratio on mixed convection air flow in upward solar air heater

A 3D Numerical study of mixed convection air flow in upward solar air heater with large spanwise aspect ratio (A = 10 to 40) was performed using CFD commercial code Fluent 14.5 (ANSYS). The main objective of this study is to investigate the channel height's effect (aspect ratio) on flow pattern and heat transfer in upward solar air heater in the particular case of low Re and high aspect ratio. The bottom plate (absorber) was submitted to Constant Heat Flux (CHF) in the range of 200 to 1000 W/m² and Reynolds number was varied from 50 to 1000. Our results are in concordance with most of authors conclusions about Poiseuille–Rayleigh–Benard flows. In mixed convection, increasing heat flux enhances heat transfer unlike forced convection flows. Simulation results of flow visualizations and Nusselt number calculations have shown that depending on Ri*, the velocity and temperature distributions in SAH vary greatly with the channel's height. The obtained results were different from previous studies. Indeed, our investigation of channel's height was achieved for the same heat flux but different Grashof numbers. For low channel's heights (high aspect ratio), increasing heat flux has not a significant effect but for higher channel's heights, an augmentation of heat flux enhances buoyancy effects in the flow and causes high turbulence. Also, increasing Reynolds number in low channel's heights (high A), can enhance substantially heat transfer. For higher channel's heights (low A), increasing Reynolds number decreases Ri* and thus buoyancy forces. Heat transfer is reduced and so Nusselt number. The obtained results may be very useful for engineers in designing and testing solar collectors.     

Turbulence Models and Large Eddy Simulations Applied to Ascending Mixed Convection Flows

Coolant flows in the cores of current gas-cooled nuclear reactors consist of ascending vertical flows in a large number of parallel passages. Under post-trip conditions such heated turbulent flows may be significantly modified from the forced convection condition by the action of buoyancy, and the thermal-hydraulic regime is no longer one of pure forced convection. These modifications are associated primarily with changes to the turbulence structure. Flow laminarization may occur, and in that event heat transfer rates may be as low as 40% of those in the corresponding forced convection case. The present work is concerned with the modelling of such ??mixed?? convection flows in a vertical heated pipe. All fluid properties are assumed to be constant and buoyancy is accounted for within the Boussinesq approximation. Six different Eddy Viscosity Models (EVMs) are examined against experimental measurements and the direct numerical simulation (DNS) data of You et?al. (Int J Heat Mass Transfer 46:1613?C1627, 2003). The EVMs selected for study embody distinct physical refinements with respect to the parent high-Reynolds-number k-?? model. Large Eddy Simulations employing the classical Smagorinsky sub-grid-scale model are also presented. It is found that the early EVM scheme of Launder and Sharma (1974) is the turbulence model in the closest agreement with direct simulation results for the ratio of mixed-to-forced convection Nusselt number, Nu/Nu ₀; the model in the poorest accord with the DNS data is a k-??-SST formulation. However, in relation to comparisons with both numerical and experimental data for forced convection Nusselt number, Nu ₀, the present work reveals that some of the more recent models perform better than the Launder-Sharma scheme. No single scheme is in consistently close agreement with the numerical simulation flow profiles.     

Mixed convection boundary layers in the stagnation-point flow toward a stretching vertical sheet

An analysis is made for the steady mixed convection boundary layer flow near the two-dimensional stagnation-point flow of an incompressible viscous fluid over a stretching vertical sheet in its own plane. The stretching velocity and the surface temperature are assumed to vary linearly with the distance from the stagnation-point. Two equal and opposite forces are impulsively applied along the x-axis so that the wall is stretched, keeping the origin fixed in a viscous fluid of constant ambient temperature. The transformed ordinary differential equations are solved numerically for some values of the parameters involved using a very efficient numerical scheme known as the Keller-box method. The features of the flow and heat transfer characteristics are analyzed and discussed in detail. Both cases of assisting and opposing flows are considered. It is observed that, for assisting flow, both the skin friction coefficient and the local Nusselt number increase as the buoyancy parameter increases, while only the local Nusselt number increases but the skin friction coefficient decreases as the Prandtl number increases. For opposing flow, both the skin friction coefficient and the local Nusselt number decrease as the buoyancy parameter increases, but both increase as Pr increases. Comparison with known results is excellent.     

Adverse and favorable mixed convection heat transfer in a two-side heated square channel

Experimental heat transfer measurements and analysis for mixed convection in a vertical square channel are presented. Water flow directions are selected such that buoyancy assists or opposes the bulk flow pressure gradient. Unlike most previous experiments with symmetrically heated circular tubes, the present configuration uses an asymmetric heating condition (two sides heated and two sides insulated) and shows significant increase in the Nusselt number for both assisted and opposed flow conditions. Observed heat transfer coefficient distributions are different from the symmetrically heated channels; and this difference in heat transfer coefficient is attributed to the formation of buoyancy driven large-scale flow structures. In general, opposed flow shows higher heat transfer coefficients, and the Nusselt number ratio is observed to increase as Gr/Re or Gr/Re² ratios increase for both assisted and opposed flow conditions. A correlation based on the buoyancy parameter predicts the heat transfer pattern well in both assisted and opposed mixed convection. The range of Reynolds numbers discussed (Re=400–10,000) is of importance for direct numerical simulations and the details provided here can serve as the benchmark data required for complicated buoyancy affected turbulence simulations.     

Simultaneous heat and mass transfer under unsteady mixed convection along a vertical slender cylinder embedded in a porous medium

Unsteady laminar mixed convection flow (combined free and forced convection flow) along a vertical slender cylinder embedded in a porous medium under the combined buoyancy effect of thermal and species diffusion has been studied. The effect of the permeability of the medium as well as the magnetic field has been included in the analysis. The partial differential equations with three independent variables governing the flow have been solved numerically using a implicit finite difference scheme in combination with the quasilinearization technique. Computations have been carried out for accelerating, decelerating and oscillatory free stream velocity distributions. The effects of the permeability of the medium, buoyancy forces, transverse curvature and magnetic field on skin friction, heat transfer and mass transfer have been studied. It is found that the effect of free stream velocity distribution is more pronounced on the skin friction than on the heat and mass transfer. The permeability and magnetic parameters increase the skin friction, but reduce the heat and mass transfer. The skin friction, heat transfer and mass transfer are enhanced due to the buoyancy forces and curvature parameter. The heat transfer is strongly dependent on the viscous dissipation parameter and the Prandtl number, and the mass transfer on the Schmidt number.     

Effect of viscous dissipation on the mixed convection heat transfer from an exponentially stretching surface

The mixed convection flow and heat transfer from an exponentially stretching vertical surface in a quiescent fluid is analyzed using similarity solution technique. Wall temperature and stretching velocity are assumed to have specific exponential function forms. The influence of buoyancy along with viscous dissipation on the convective transport in the boundary layer region is analyzed in both aiding and opposing flow situations. The flow is governed by the mixed convection parameter Gr/Re². The velocity and temperature inside the boundary layer are observed to be influenced by the parameters like Prandtl number Pr, Gebhart number Gb. Significant changes are observed in non-dimensional skin friction and heat transfer coefficients due to viscous dissipation in the medium. The flow and temperature distributions inside the boundary layer are analyzed and the results for non-dimensional skin friction and heat transfer coefficients are discussed through computer generated plots.     

Buoyancy Convection in Low Prandtl Number Liquids with Large Temperature Variation

Two-dimensional laminar convection in low Prandtl number liquids driven by the buoyancy force is studied. The liquid is contained in a closed square cavity with isothermal vertical walls kept at different temperatures. The top and bottom walls are assumed to be insulated. The thermal conductivity of the liquid is assumed to depend on temperature. ADI and SOR schemes are employed. The heat transfer is found to decrease appreciably across the cavity with a decrease in thermal conductivity.     

Numerical Study of Heat Transfer in a Rectangular Channel with Porous Covering Obstacles

A numerical study is performed to analyze steady laminar forced convection in a channel in which discrete heat sources covered with porous material are placed on the bottom wall. Hydrodynamic and heat transfer results are reported. The flow in the porous medium is modeled using the Darcy–Brinkman–Forchheimer model. A computer program based on control volume method with appropriate averaging for diffusion coefficient is developed to solve the coupling between solid, fluid, and porous region. The effects of parameters such as Reynolds number, Prandtl number, inertia coefficient, and thermal conductivity ratio are considered. The results reveal that the porous cover with high thermal conductivity enhances the heat transfer from the solid blocks significantly and decreases the maximum temperature on the heated solid blocks. The mean Nusselt number increases with increase of Reynolds number and Prandtl number, and decrease of inertia coefficient. The pressure drop along the channel increases rapidly with the increase of Reynolds number.     

矩形液池热毛细对流转捩途径研究

主要研究矩形液池热毛细对流的分岔转捩. 通过测量流体内部温度振荡情况, 详细研究了热毛细对流的转捩过程和转捩途径. 实验发现, 矩形液池热毛细对流的转捩过程依次经历了定常、规则振荡、不规则振荡的阶段. 对于不同普朗特数的硅油在不同长高比情况下, 通向混沌的途径不同. 在转捩过程中, 随着温差的增加, 普朗特数在16 (1cSt) 以下和普朗特数为25 (1.5cSt)、长高比为26 的硅油热毛细对流主要以准周期分岔的转捩方式为主;而普朗特数为25 以上的则以倍周期分岔的转捩方式为主;两种分岔有时还会伴随有切分岔形式的出现.实验中还观察到了表面波动和对流涡胞振荡等现象.