Analytical methods for antimony speciation in waters at trace and ultratrace levels. A review

This review summarizes and discusses the analytical methods and techniques most frequently described in the literature for the determination of antimony species in waters (and possibly in other matrices) at ultratrace levels. The analytical methods for the separation and/or selective determination of Sb species fall into four main categories: 1. Chemical methods, which include such extraction techniques as: liquid-liquid and liquid-solid extraction, selective hydride generation and coprecipitation methods. 2. Chromatographic methods, which also includes a discussion of hyphenated techniques with different detectors. 3. Electrochemical methods based on the use of electrochemical detectors. 4. Kinetic methods The state-of-the-art of the main applications in waters and environmental samples and future trends are also reviewed.     

基于稳定同位素标记的蛋白质组学定量方法研究进展

定量蛋白质组学已经成为后基因时代的重要研究方向之一。目前该领域的研究主要采用无标记定量方法和稳定同位素标记定量法。其中,基于稳定同位素标记的蛋白质组定量方法发展非常迅速,已为生命科学研究提供了重要的技术支撑。本文分析了基于稳定同位素标记的蛋白质组学定量方法,包括相对定量方法和绝对定量方法,并对其发展进行了展望。     

Analytical methods for antimony speciation in waters at trace and ultratrace levels. A review

This review summarizes and discusses the analytical methods and techniques most frequently described in the literature for the determination of antimony species in waters (and possibly in other matrices) at ultratrace levels. The analytical methods for the separation and/or selective determination of Sb species fall into four main categories: 1. Chemical methods, which include such extraction techniques as: liquid-liquid and liquid-solid extraction, selective hydride generation and coprecipitation methods. 2. Chromatographic methods, which also includes a discussion of hyphenated techniques with different detectors. 3. Electrochemical methods based on the use of electrochemical detectors. 4. Kinetic methods The state-of-the-art of the main applications in waters and environmental samples and future trends are also reviewed. Received: 13 June 1997 / Revised: 29 September 1997 / Accepted: 3 October 1997     

The use of gold nanoparticles in diagnostics and detection

The widespread use of gold nanoparticles (GNPs) as labels in diagnostics and detection is due to a unique combination of chemical and physical properties that allow biological molecules to be detected at low concentrations. In this critical review detection methods based on GNPs are divided up and discussed based on the way in which signals are generated in response to specific target molecules. Particular attention is devoted to methods that allow target molecules to be detected with the unaided eye because these, more than any other, harness the full range of properties that make GNPs unique. Methods that are discussed include those in which specific target molecules induce a visible colour change, chromatographic methods that allow non-specialized users to perform sophisticated tests without additional equipment and methods in which trace amounts of GNPs are rendered visible to the unaided eye by catalytic deposition of a metal such as silver. The use of metal deposition as a means of enhancing the signal for optical and electrical detection is also reviewed. The other detection methods included in this review are based on interactions between GNPs and molecules located in close proximity to their surface. These include methods in which light emission from such molecules is enhanced (surface enhanced Raman scattering) or quenched (fluorescence), and methods in which the accumulation of specific target molecules induce subtle changes in the extinction spectra of GNPs that can be followed in real time with inexpensive equipment (166 references).     

Moving from official to traceable methods

The primary purpose in performing analysis is to obtain information on which information decisions can be made. This article will discuss the principles of the concept `moving from official to traceable methods', where traceable methods are validated methods which are not published as official/standard methods.     

Developments in sample preparation and separation techniques for the determination of inorganic ions by ion chromatography and capillary electrophoresis.

A review is presented of sample preparation and separation techniques for the determination of inorganic ions by ion chromatography (IC) and capillary electrophoresis (CE). Emphasis has been placed on those sample treatment methods which are specific to inorganic analysis, and the developments in separation methods which are discussed are those which enhance the capabilities of IC and CE to handle complex sample matrices. Topics discussed include solid-phase extraction for sample clean-up and preconcentration, dialytic methods, combustion methods, matrix-elimination IC, electrostatic IC, electrically polarised ion-exchange resins, electromigration sample preparation in CE, chromatographic sample preparation for CE, use of high-ionic strength background electrolytes, buffering of background electrolytes in CE, use of capillary electrochromatography for inorganic determinations, and methods for the manipulation of separation selectivity in both IC and CE. Finally, some possible future trends are discussed.     

Analytical equilibrium gradient methods

Analytical equilibrium gradient methods are non-linear separation methods in which the separation mechanism involves a force gradient along the separation channel. These methods can be classified into two categories: those in which the gradient is a field gradient applied along the separation channel (i.e., field gradient), and those in which the channel is subjected to a constant field with a gradient formed in some other property (i.e., constant field). Standard deviation of peak width, resolution and peak capacity are important parameters in characterizing equilibrium gradient methods, and general expressions can be obtained from considering both the point of force acting on the analyte and the basic flux equation. Several successful examples, such as density gradient sedimentation, isoelectric focusing and electromobility focusing are discussed. Based on equilibrium gradient methods in the field gradient category, a method to dynamically improve peak capacity is described. An example of such an approach is given using electromobility focusing.     

Extensive generalization of renormalized coupled-cluster methods

The recently developed completely renormalized (CR) coupled-cluster (CC) methods with singles, doubles, and noniterative triples or triples and quadruples [CR-CCSD(T) or CR-CCSD(TQ), respectively], which are based on the method of moments of CC equations (MMCC) [K. Kowalski and P. Piecuch, J. Chem. Phys. 113, 18 (2000)], eliminate the failures of the standard CCSD(T) and CCSD(TQ) methods at larger internuclear separations, but they are not rigorously size extensive. Although the departure from strict size extensivity of the CR-CCSD(T) and CR-CCSD(TQ) methods is small, it is important to examine the possibility of formulating the improved CR-CC methods, which are as effective in breaking chemical bonds as the existing CR-CCSD(T) and CR-CCSD(TQ) approaches, which are as easy to use as the CR-CCSD(T) and CR-CCSD(TQ) methods, and which can be made rigorously size extensive. This may be particularly useful for the applications of CR-CC methods and other MMCC approaches in calculations of potential energy surfaces of large many-electron systems and van der Waals molecules, where the additive separability of energies in the noninteracting limit is very important. In this paper, we propose different types of CR-CC approximations, termed the locally renormalized (LR) CCSD(T) and CCSD(TQ) methods, which become rigorously size extensive if the orbitals are localized on nointeracting fragments. The LR-CCSD(T) and LR-CCSD(TQ) methods rely on the form of the energy expression in terms of the generalized moments of CC equations, derived in this work, termed the numerator-denominator-connected MMCC expansion. The size extensivity and excellent performance of the LR-CCSD(T) and LR-CCSD(TQ) methods are illustrated numerically by showing the results for the dimers of stretched HF and LiH molecules and bond breaking in HF and H2O.     

Recent advances in ratio primary reference measurement procedures (definitive methods) and their use in certification of reference materials and controlling assigned values in proficiency testing

Three very accurate (definitive) methods by RNAA for the determination of Se, As and Fe respectively, which were recently elaborated in our laboratory, are reviewed and their use in certification of reference materials and in checking the assigned values in proficiency tests is demonstrated on several examples. According to VIM 3 nomenclature these methods may be called: ratio primary reference measurement procedures (RPRMPs). RPRMPs with their expanded uncertainties of 2.7–3.6 % are comparable to ID-MS methods and are the only methods of such high metrological quality which can be used for the determination of trace amounts of monoisotopic elements.     

Layer-by-layer assembly: from conventional to unconventional methods

Layer-by-layer (LbL) assembly is a powerful means for fabricating multilayer thin films with controlled architecture and composition. This feature article discusses different types of methods for LbL assembly. On the one hand, some of the conventional LbL methods are introduced, which are driven by electrostatic interactions, hydrogen bonds, step-by-step reactions, sol-gel processes, molecular recognition, charge-transfer, stepwise stereocomplex assembly, and electrochemistry. On the other hand, some of the unconventional methods for fabricating of the building blocks which can not be assembled by conventional methods are also summarized. These unconventional methods usually involve the formation of supramolecular structures via one type of self-assembly. These structures can subsequently be used as building blocks in another type of self-assembly. To take advantage of these conventional and unconventional methods, a great number of building blocks can be fabricated into multilayer thin films with a defined sequence structure in a designed way. It has been demonstrated that LbL methods provide new horizons for surface molecular engineering.     

复杂化学体系测量数据的主因子数估计方法的分类及进展

复杂化学体系的数据解析中,估计主因子数是必要步骤,同时也是一个难题.目前存在多种各具特点的估计方法.对这些方法进行整理和归纳可为解决这一难题提供全局视角下的综合性信息,有助于进一步研究.本文结合本课题组的相关研究对主因子数估计问题进行了系统深入的分析;整理了近年来出现的各种估计方法,并将之分为三类,即经验方法、数学原理完备的方法以及统计方法,并对每类方法的特点和共性进行了分析和说明;归纳出第二类方法的基本原理.     

Data mining by total ranking methods: a case study on optimisation of the "pulp and bleaching" process in the paper industry

Total order ranking methods are multicriteria decision making techniques used for the ranking of various alternatives on the basis of more than one criterion. The criteria, which are the standards by which the elements of the system are judged are not always in agreement, they can be conflicting, motivating the need to find an overall optimum that can deviate from the optima of one or more of the single criteria. Total order ranking methods are based on an aggregation of the criteria in a scalar function, i.e. an order or ranking index, which allow to sort elements according to its numerical value. Several evaluation methods which define a ranking parameter generating a total order ranking have been proposed in the literature. Four total order ranking methods are here described: Desirability functions, Utility functions, Dominance functions and Absolute Reference method. These methods have been compared to each other by applying them to a decision making problem in the paper industry. Various bleaching processes have been analysed and compared on the basis of multiple criteria, the aim being to find out best bleaching process among the ones proposed in the last years as alternative to chlorine bleaching process which is of high environmental impact due to the potential for chlorinated dioxin production.     

Determination of uranium by neutron activation analysis using substoichiometric separation

Three analytical methods for uranium by neutron activation are described. The methods are based on the substoichiometric separation of barium or lanthanum, which are the fission products of uranium-235 by neutron irradiation. Uranium contents in high purity materials were determined by the methods, which were found to be useful for the determination of a trace amounts of uranium.     

Improved variable reduction in partial least squares modelling based on predictive-property-ranked variables and adaptation of partial least squares complexity

The calibration performance of partial least squares for one response variable (PLS1) can be improved by elimination of uninformative variables. Many methods are based on so-called predictive variable properties, which are functions of various PLS-model parameters, and which may change during the variable reduction process. In these methods variable reduction is made on the variables ranked in descending order for a given variable property. The methods start with full spectrum modelling. Iteratively, until a specified number of remaining variables is reached, the variable with the smallest property value is eliminated; a new PLS model is calculated, followed by a renewed ranking of the variables. The Stepwise Variable Reduction methods using Predictive-Property-Ranked Variables are denoted as SVR-PPRV. In the existing SVR-PPRV methods the PLS model complexity is kept constant during the variable reduction process. In this study, three new SVR-PPRV methods are proposed, in which a possibility for decreasing the PLS model complexity during the variable reduction process is build in. Therefore we denote our methods as PPRVR-CAM methods (Predictive-Property-Ranked Variable Reduction with Complexity Adapted Models). The selective and predictive abilities of the new methods are investigated and tested, using the absolute PLS regression coefficients as predictive property. They were compared with two modifications of existing SVR-PPRV methods (with constant PLS model complexity) and with two reference methods: uninformative variable elimination followed by either a genetic algorithm for PLS (UVE-GA-PLS) or an interval PLS (UVE-iPLS). The performance of the methods is investigated in conjunction with two data sets from near-infrared sources (NIR) and one simulated set. The selective and predictive performances of the variable reduction methods are compared statistically using the Wilcoxon signed rank test. The three newly developed PPRVR-CAM methods were able to retain significantly smaller numbers of informative variables than the existing SVR-PPRV, UVE-GA-PLS and UVE-iPLS methods without loss of prediction ability. Contrary to UVE-GA-PLS and UVE-iPLS, there is no variability in the number of retained variables in each PPRV(R) method. Renewed variable ranking, after deletion of a variable, followed by remodelling, combined with the possibility to decrease the PLS model complexity, is beneficial. A preferred PPRVR-CAM method is proposed.     

Mass spectrometric study of randomly methylated beta-cyclodextrins using ionspray, atmospheric pressure chemical ionization and matrix-assisted laser desorption/ionization

Mixtures of methylated beta-cyclodextrins were characterized using three different methods of mass spectrometry: ionspray, atmospheric pressure chemical ionization (APCI) and matrix-assisted laser desorption/ionization (MALDI). Each of these methods allows a fast and simple determination of the degree of substitution, and can provide evidence for differences in the methylation of batches which have very similar global degrees of substitution. The three methods are in good qualitative agreement, but there are systematic differences in the quantitative results for the percentages of the various methylated molecules present in a batch. This is attributed to ionization yields which increase with the number of methyl groups, with different slopes for the different methods.     

氢气的分析方法研究

介绍了低纯度氢气和高纯度氢气的不同分析检测方法。对于纯度小于99.99%的氢气,其分析方法主要有爆炸法、吸收法、膜分离法和气相色谱法;对于纯度大于99.99%的氢气,其分析方法主要有变温浓缩的热导池气相色谱法、配有光电离子化检测器(DID)的气相色谱法和色谱-质谱联用法。     

Non-linear coherent Raman spectroscopy

A general introduction to several coherent Raman methods, which are based on the third-order non-linear susceptibility is given. These methods are described basically under a common point of view, which is the excitation of coherent molecular vibrations in the field of two strong laser beams operating at different frequencies. Most of these methods can be applied successfully also under electronic resonance conditions. As a particular example, studies of coherent anti-Stokes continuum resonance Raman scattering in iodine vapour will be presented and discussed in detail.     

数据离群值的检验及处理方法讨论

由目前普遍使用的分析化学教材中与离群值相关的内容出发,对其进行对比和分析,说明数据离群值检验的意义和重要性。对几种常见的离群值判定方法进行了列举和比较,并对已确认为异常值的数据的处理方法也进行了对比和讨论。各种检验和处理方法各有其优势和劣势,根据实际情况选择不同方法或多种方法配合使用,能够更好地实现对离群值的检验和处理。