Some N-alkyl-naphthylazo pyridinium salts as new reagents for the spectrophotometric determination of anionic surfactants

Summary Eleven pyridinium azo dyes with straight-chain alkyl groups C_nH_2n+1–(n=6–18) and bromoalkyl groups BrC_mH_2m–(m=6–12) were synthesized with the intention of developing reagents for the determination of low levels of anionic surfactants in an aqueous medium. The effect of the alkyl chain length of these reagents on the reactivity with anionic surfactants such as sodium dodecylsulphate (SDS), sodium linear-dodecylbenzenesulphonate (DBS), sodium dodecylsulphonate (DS) and sodium laurate (SL) was studied. It was found that the alkyl chain length played an important role in the formation of ion associates and the composition of the ion associates formed. These reagents were classified into four groups with respect to the reactivity with anionic surfactants. The first group (n,m=6) reacts only with DBS. The second group (n,m=8) reacts with SDS, DBS and DS. The third group (n,m=10, 12) reacts with SDS, DBS and DS; however, the colour intensity of the DBS-ion associate was unstable. The fourth group (n=14, 16, 18) reacts with all anionic surfactants examined, and the composition of the ion associates with SDS and DS was 2:1 ([reagent]/[surfactant]) though that of the ion associates of the three reagent groups mentioned above was 1:1. The optimal conditions for the determination of anionic surfactants in river water with 1-octyl-4-(4-aminonaphthylazo)-pyridinium bromide was examined. The calibration graph was linear up to 3×10^–6 mol/l, and the apparent molar absorptivity of the ion associate was 3.8×10⁴ l mol^–1 cm^–1 (at 427 nm). The relative standard deviation for 2.4×10^–6 mol/l SDS was 4.9%. Recoveries of 88–107% were found for 8.0×10^–7 mol/l SDS in river water samples.     

Simultaneous determination of sodium dodecyl sulphate and sodium linear-dodecylbenzenesulphonate with 1-stearyl-4-(4-aminonaphthylazo)-pyridinium bromide by spectrophotometry

A rapid and sensitive spectrophotometric method for the simultaneous determination of sodium dodecyl sulphate (SDS) and sodium linear-dodecylbenzenesulphonate (DBS) with 1-stearyl-4-(4-aminonaphthylazo)-pyridinium bromide (SAPB) is described using the difference at the maximum absorption wavelength of the SDS- and the DBS-ion associate. SDS and DBS have been determined independently by measuring their respective absorbances at the maximum absorption wavelength. The apparent molar absorptivities of the SDS- and the DBS-ion associate are 8.0×10⁴ l mol^–1 cm^–1 at 445 nm and 4.5×10⁴ l mol^–1 cm^–1 at 424 nm, respectively. The calibration graph for SDS is linear in the range from 0.1 to 1.0×10^–6 mol/l in the presence of 1.2×10^–6 mol/l DBS and for DBS from 0.8 to 2.0×10^–6 mol/l in the presence of 8.0×10^–7 mol/l SDS. The relative standard deviation (n=15) for 8.0×10^–7 mol/l SDS is 3.4% and for 1.6×10^–6 mol/l DBS 2.1%. The proposed method has been applied to the simulatenous determination of SDS and DBS in river water samples.     

Spectrophotometric determination of manganese with derivatives of 1,3,3-trimethyl-2-[3-(1,3,3-trimethyl-1,3- H-indol-2-ylidene)propenyl]-3 H-indolium

A new, simple, rapid, and sensitive spectrophotometric method has been developed for the determination of manganese in sewage. The method is based on the reaction of manganese with derivatives of 1,3,3-trimethyl-2-[3-(1,3,3-trimethyl-1,3-H-indol-2-ylidene)propenyl]-3H-indolium to form a colored ion associate with a sensitive absorption maximum at 560 nm. The appropriate reaction conditions have been established: pH 8.5–10.0, 1.25–2.3×10^–3 mol L^–1 1-nitroso-2-naphthol, and 1.6–2.4×10^–4 mol L^–1 dye reagent. Beer's law is obeyed for manganese concentrations up to 4.2 mg L^–1. The limit of detection is 0.01 mg L^–1 Mn²⁺; the molar absorptivity of the ion associate was 7.5×10⁴ L mol^–1 cm^–1. The effect of various foreign ions was examined. A reaction mechanism is suggested. The developed procedure was tested for determination of manganese in sewage with satisfactory precision and accuracy.     

Micro-pumping flow system for spectrophotometric determination of anionic surfactants in water

A novel procedure has been developed for spectrophotometric determination of anionic surfactants in water using a solenoid micro-pump as fluid-propulsion device. The proposed method is based on substitution of methyl orange (MO) by anionic surfactants in the formation of an ion-pair with the cetyl pyridine ion (CPC⁺) at pH 5.0. The flow network comprised four solenoid micro-pumps which, under microcomputer control, enabled sample and reagent introduction, and homogenisation in the reaction zone. The system is flexible and simple to operate and control, and sensitive and precise. The analytical plot for the anionic surfactant was linear between 1.43×10^–6 and 1.43×10^–5 mol L^–1 (0.5 to 5.0 mg L^–1; R=0.997, n=5). The relative standard deviation was 0.8% (n=11) for a sample containing 5.74×10^–6 mol L^–1 (2 mg L^–1) surfactant. The limit of detection was 9.76×10^–8 mol L^–1 (0.034 mg L^–1) and the sampling throughput was 60 determinations per hour. The results obtained for washing-water samples were comparable with those obtained by use of the reference method, and no significant differences at the 95% confidence level were observed.     

Determination of titanium by adsorption-voltammetry with 2-(5-bromo-2-pyridylazo)-5-(diethylamino)-phenol (5-Br-PADAP)

Summary The 1:1 complex between titanium (IV) and 5-Br-PADAP can be used to determine titanium by adsorption voltammetry at a stationary Hg-electrode. The experimental conditions for the determination are described. The detection limit is 3×10^–10 mol/l Ti (0.015 ppb). Calibration curves are linear for solutions containing 4×10^–10 to 5×10^–8 mol/l Ti(IV) and an enrichment time of 3 min. The influence of foreign ions was investigated. The determination can be carried out in the presence of a 5000-fold excess of iron.     

Spectrophotometric determination of cationic and anionic surfactants with anionic dyes in the presence of nonionic surfactants,part II: Development of batch and flow injection methods

On the basis of the changes in absorption spectra of azo dyes on the addition of an organic onium ion, spectrophotometric methods for the determination of organic onium salts and anionic surfactants were developed, and applied to flow injection method. Propyl orange (PO^–) was used for the determination of organic onium ions. Pairs of PO^– and Zeph⁺ (tetradecyldimethyl-benzylammonium ion) or PO^– and nC₁₈TMA⁺ (n-octadecyltrimethylammonium ion) were used for the determination of anionic surfactants. The determination range of organic onium ions were (0–3) × 10^–5 M by a batch method and were (0–2) × 10^–5 M by a flow injection method. The determination ranges of anionic surfactants were (0–2) × 10^–5 M by the batch method, and were (0–5) × 10^–5 M by the flow injection method, and the detection limit corresponding toS/N = 3 was 3 × 10^–7 M by the flow injection method. By the proposed flow injection method, anionic surfactants in water samples were determined.     

Adsorption–Photometric Determination of Cationic Surfactant Traces

A procedure has been developed for the adsorption–photometric determination of cationic surfactants in natural water. The procedure is based on the adsorption preconcentration of the cationic surfactants on silica gel, the reaction of the concentrate with the anionic reagent bromothymol blue to form ion pairs on a solid surface, and the photometric determination of excess bromothymol blue in solution. The analytical range is (0.5–5) × 10^–5 M for a 50-mL sample.     

Adsorptive stripping voltammetric measurements of trace amounts of platinum(II) and ruthenium(III) in the presence of 1-(2-pyridylazo)-2-naphthol

An extremely sensitive stripping voltammetric procedure for low level measurements of platinum (II, IV) or ruthenium (III, IV) is reported. The method is based on the interfacial accumulation of the platinum (II) or ruthenium (III)-1-(2-pyridylazo)-2-naphthol complex on the surface of a hanging mercury drop electrode, followed by the reduction of the adsorbed complex during the cathodic scan. The peak potential was found to be –0.8 V vs. Ag/AgCl electrode and the reduction current of the adsorbed complex ions of platinum (II) or ruthenium (III) was measured by differential pulse cathodic stripping voltammetry. The optimum experimental conditions were: 1.5×10^–7 mol/l of 1-(2-pyridylazo)-2-naphthol solution of pH 9.3, preconcentration potential of –0.2 V, accumulation time of 3 min and pulse amplitude of 50 mV with 4 mV s^–1 scan rate in the presence of ethanol-water (30% v/v) — sodium sulphate (0.5 mol/l). Linear response up to 6.4 × 10^–8 and 5.1 × 10^–8 mol/l and a relative standard deviation (at 1.2×10^–8 mol/l) of 2.4 and 1.6% (n=5) for platinum (II) and ruthenium (III) respectively were obtained. The detection limits of platinum and ruthenium were 3.2×10^–10 and 4.1×10^–10 mol/l, respectively. The electronic spectra of the Pt(II) — PAN and Ru(III) — PAN complexes were measured at pH 9.3 and the stoichiometric ratios of the complexes formed were obtained by the molar ratio method. The effects of some interfering ions on the proposed procedure were critically investigated. The method was found suitable for the sub-microdetermination of ruthenium (IV) and platinum (IV) after their reduction to ruthenium (III) and platinum (II) with sulphur dioxide in acid media. The applicability of the method for the analysis of binary mixtures of ruthenium (III) and (IV) or platinum (II) and (IV) has also been carried out successfully. The method is simple, rapid, precise, and promising for the determination of the tested metal ions at micro-molar concentration level.     

5-(4-Carboxylphenylazo)-8-aminoquinoline as an analytical reagent for the spectrophotometric determination of gold

The synthesis and analytical application of 5-(4-carboxylphenylazo)-8-aminoquinoline (CPAQ) are described. A simple, rapid, selective, and sensitive spectrophotometric method for the determination of microgram amounts of gold is developed, based on the colour reaction between the metal ion and CPAQ in the presence of cetyltrimethyl ammonium bromide. Gold (III) reacts with the reagent in the ratio 1 3 (metal to ligand) in alkaline solution to form a blue-green complex with an absorption maximum at 608 nm. Beer's law is obeyed over the concentration range 0–1.8 g · ml^–1 (ppm) of gold. The molar absorptivity and Sandell's sensitivity of the method are 9.11 × 10⁴ l · mole^–1 · cm^–1 and 0.00216 g · cm^–2, respectively. The interference of various ions has been studied and conditions were developed for the determination of gold in an ore and anode slimes.     

3-(4-Tolylazo)phenylboronic acid as the active component of polyhydroxy compounds-selective electrodes

Ionophoric, extraction, acidic and hydrophobic properties of 3-(4-tolylazo)phenylboronic acid (TAPBA) were studied. Determined K_d value equals to 36±2, pK_a equals to 8.6±0.5. TAPBA extracts dobutamine from water into chloroform and transports it across a bulk chloroform membrane. The recovery is 83% (pH=7.5), the transport rate – (6.5±0.5)×10⁻⁷ mol/h. ¹H and ¹³C NMR data confirm the formation of an 1:1 complex between arylboronic acid and catecholamine. TAPBA was used as electrode-active component of plasticized membrane electrodes with cationic and anionic responses to catecholamines and phenolic acids, respectively. For the diethyl sebacate-plasticized membrane, a slope of electrode function to dobutamine is 56±2 mV/decade; the detection limit is 1.3×10⁻⁵ mol/l; the linear range – 5×10⁻⁵–1×10⁻² mol/l; the working pH-range – 4.8–7.6; the response time – 5–10 s. ISE gives incomplete cationic function to less lipophilic catecholamines. The membrane with cationic additive shows an anionic response to caffeic acid in wide pH range.     

Determination of potassium in sea-water by capillary isotachophoresis

Summary A new analytical procedure for the determination of potassium in sea-water was developed using capillary isotachophoresis and ion-exchange. After the sea-water sample was passed through the column packed with an ammonium form cation-exchange resin, sodium ion was removed with 2×10^–2 mol/l ammonium chloride solution and then potassium ion was eluted with 3×10^–1 mol/l ammonium chloride solution. Simultaneous determination of potassium and sodium ions was performed with a newly developed electrolyte system; the leading electrolyte was 5 mmol/l cesium hydroxide containing 2 mmol/l 18-crown-6, 0.01% hydroxypropyl methylcellulose (HPMC) and 70% methanol; the terminating electrolyte was 5 mmol/l tetrabutylammonium bromide containing 0.01% HPMC and 70% methanol. A large amount of ammonium in the eluate did not interfere with the isotachophoretic measurement of potassium and sodium ions. A linear working curve was obtained for artificial sea-water samples containing up to 700 mg/l potassium ion. The proposed method was applied to the determination of potassium in surface and bottom sea-water samples.

---

Kaliumbestimmung in Meereswasser durch Capillar-Isotachophorese

     

An ion-extractive liquid-membrane anionic surfactant sensitive electrode and its analytical applications

Summary An electrode having as active substance bis (diphenylglyoxime)-o-phenanthroline-cobalt(III) dodecylsulphate (10^–3 M) in o-dichlorobenzene, responds to dodecylsulphate anion with a slope of about 48 mV/decade in the 3×10^–6–4×10^–3M concentration range. Common inorganic and organic anions do not interfere. The extraction constants of anionic surfactants in the membrane rise as their hydrocarbon chain gets longer, so that the higher members of the alkylsulphate homologous series do interfere. The surfactant-extractive electrode enables the potentiometric titration of anionic surfactants in the pH-range 1–11, in aqueous media and in the presence of alcohols. The differential titration of some binary mixtures of anionic surfactants is also possible.

---

Eine auf anionische Tenside ansprechende ionen-cxtraktive Flüssigkeits-Membranelektrode und ihre analytischen Anwendungen

Zusammenfassung Die beschriebene Elektrode besitzt als aktive Substanz Bis(diphenylglyoxim)-o-phenanthrolinkobalt(III)-dodecylsulfat (10^–3 M) in o-Dichlorbenzol und spricht auf das Dodecylsulfatanion mit 48 mV/Dekade im Konzentrationsbereich von 3 · 10^–6 bis 4 · 10^–3 an. Übliche anorganische und organische Anionen stören nicht. Die Extraktionskonstanten von anionischen oberflächenaktiven Substanzen nehmen mit der Länge der Kohlenwasserstoffkette zu, so daß die höheren Glieder der Alkylsulfatreihe stören. Die Elektrode ermöglicht die potentiometrische Titration anionischer oberflächenaktiver Substanzen im pH-Bereich 1–11 in wäßrigem Medium und in Gegenwart von Alkoholen. Eine differentielle Titration einiger binärer Gemische ist ebenfalls möglich.

     

Investigation of 2-[(<Emphasis Type="Italic">E</Emphasis>)-2-(4-diethylaminophenyl)-1-ethenyl]-1,3,3-trimethyl-3H-indolium as a new highly sensitive reagent for the spectrophotometric determination of nitrophenols

A new, simple, rapid, and sensitive spectrophotometric method has been developed for the determination of nitrophenols [picric acid (PA); dinitrophenols (DNP)] in wastewater samples. The method is based on the reaction of nitrophenols with 2-[(E)-2-(4-diethylaminophenyl)-1-ethenyl]-1,3,3-trimethyl-3 H-indolium chloride reagent to form the colored ion associates, which are extracted by organic solvents. The molar absorptivity of the ion associates of PA with the investigated reagent ranges from 8.3×10⁴ to 11.3×10⁴ L mol^–1 cm^–1, depending on the extractant. Because only PA is extracted in an acidic medium with the investigated reagent, but both PA and DNP are extracted in an alkaline medium, it is possible to determine both substances in a mixture. Appropriate reaction conditions have been established. The absorbance of the colored extracts obeys Beers law in the range of 0.04–4.58 mg L^–1 PA, 1.0–18.4 mg L^–1 2,4-DNP and 1.2–14.7 mg L^–1 2,6-DNP, respectively. The limit of detections, calculated from a blank test (n=10; P=0.95), are 0.05 mg L^–1 PA, 0.9 mg L^–1 (2,4-DNP), and 1.1 mg L^–1 (2,6-DNP), respectively.     

Flow injection determination of anionic polyelectrolytes using an anionic surfactant-selective plasticized poly(vinyl chloride) membrane electrode detector

 A potentiometric flow injection method for the determination of anionic polyelectrolytes utilizing a flow-through type surfactant-selective electrode detector is described. The method is based on the detection of the concentration increase of anionic surfactant liberated from a reagent stream containing an ion associate between cationic polyelectrolyte, poly(diallyldimethylammonium chloride) and anionic surfactant, dodecylbenzenesulfonate, which is caused by the formation of a polyion complex between cationic and anionic polyelectrolytes. The response of the electrode detector as a peak-shaped signal was obtained for injected anionic polyelectrolyte samples. A linear relationship was found to exist between peak height and the logarithmic concentration of potassium poly (vinyl sulfate) (PVSK) with a slope of 30 mV decade^-1 in a concentration range of 1.0×10^-4 to 1.0×10^-3 mol/L. Identical relationships were obtained for sodium alginate and carageenan (also anionic polyelectrolytes) as for PVSK but with a lower sensitivity. The detection limit for PVSK was 2.5×10^-5 mol/L. The relative standard deviation for 5 injections of a 2.5×10^-4 mol/L PVSK solution was 1.3% and the sampling rate was ca. 10 samples h^-1. Received: 9 April 1996/Revised: 8 July 1996/Accepted: 14 July 1996     

Flotation-spectrophotometric determination of osmium (ruthenium) with thiocyanate and Capri blue

A sensitive flotation-spectrophotometric method for the determination of osmium, based on the ion associate formed by the anionic thiocyanate osmium complex with oxazine basic dye, Capri blue (CB), has been developed. The ion associate is separated by shaking the aqueous solution (pH 2–3) with diisopropyl ether, washing the precipitate with water, and dissolving it in methanol. Molar absorptivity in this method amounts to 2.7 × 10⁵ liters mol⁻¹ cm⁻¹ at 630 nm. The molar ratio Os:SCN:CB in the separated associate is 1:8:5. Under the conditions of the determination of osmium, ruthenium can be determined as well. Metals that form anionic thiocyanate complexes, including other platinum metals, interfere. The method becomes highly selective for osmium and ruthenium after their separation by distillation as tetroxides. Osmium and ruthenium were determined with Capri blue after their extractive separation as thiocyanate complexes.     

Determination of methamphetamine in urine samples with sodium 1,2-naphthoquinone-4-sulphonate

Optimal conditions have been studied for the determination of methamphetamine in urine samples by an extractive-spectrophotometric method with sodium 1,2-naphthoquinone-4-sulphonate (NQS) as reagent. These conditions are: NaHCO₃ pH 10, NQS 6.3 × 10^–3 mol/l and heating for 5 min at 45°C. The accuracy and precision of the method were tested. The detection limits were 0.2 mg/l in the standard and 0.9 mg/l when 5 ml of urine sample were taken. The standard deviation of blank urine was evaluated from 12 different samples. The relative errors found in the determination of methamphetamine in urine were lower than 10% if the methamphetamine-amphetamine ratio was higher than 4.     

Flow injection analysis of cationic disinfectants in pharmaceuticals using ion associates formed between sulphonephthalein dyes and quinidine

Cationic disinfectants were reacted with bromochlorophenol blue and quinidine in 1,2-dichloroethane to form a blue ternary ion associate. The extraction system was introduced into a two-line flow manifold. The sampling rate was 30 h^–1 and the calibration graphs were linear up to 5×10^–5 mol/l for benzethonium and berberine.     

Liquid–liquid microextraction and spectrophotometric determination of anionic surfactants using Astra Phloxine FF

A novel and simple procedure for determination of anionic surfactants has been developed. The method is based on the reaction of sodium dodecyl sulphate (SDS) with Astra Phloxine FF reagent at pH 3–8, followed by liquid–liquid microextraction of the formed ion associate into an organic phase containing a mixture of carbon tetrachloride and dichloroethane (4:1, v/v) and subsequent UV-Vis detection at 555 nm. The calibration plot was linear in the range 0.006–0.29 mg L^?1 of SDS. The limit of detection (LOD), calculated based on 3s, is 0.002 mg L^?1. The method was applied to the determination of anionic surfactants in real wastewater samples.     

Isotachophoretic analysis of the lipophilic cation tetraphenylphosphoniumbromide

Summary Tetraphenylphosphoniumbromide (TPP), a lipophilic cation used for the determination of plasma membrane potential, was quantified by isotachophoresis. The optimized leading electrolyte consisted of 10 mmol/l KOH as leading ion, supplemented with 0.5% hydroxy-ethylcellulose. The pH was adjusted to 9.5 with methionine. The terminating ion was 10 mmol/l tris(hydroxymethyl)-aminomethane (pH 9.2, adjusted with methionine). Leading ion concentrations of 10, 1 and 0.5 mmol/l respectively, showed nearly the same detection limits (2×10^–11 mol of TPP). This detection limit allowed the quantitative determination of TPP down to a concentration of 2 mol/l. Calibration curves in the range of 2×10^–11 to 1.5×10^–10 mol of TPP showed correlation coefficients greater than 0.95 (n=12; =0.01).     

A study of the polarographic behaviour of meso-tetra(4-trimethylammoniumphenyl)porphine and its copper and magnesium complexes and its analytical applications

The investigation of the electrochemical reduction and the adsorption of meso-tetra(4-trimethylammoniumphenyl)porphine (T(4-TMAP)P) at a mercury electrode in alkaline solution shows that the overall reduction involves three two-electron steps, of which the first step is reversible and the latter two are irreversible. In addition, T(4-TMAP)P and its metal complexes of Cu(II) and Mg(II) can be strongly adsorbed on the surface of a mercury electrode. The adsorption phenomena have been utilized as a preconcentration step for the determination of trace amounts of the two ions by single sweep polarography. For copper, the detection limit is 1 × 10^–8 mol dm^–3, for magnesium, 1 × 10^–7 mol dm^–3, the latter being limited by the reagent blank. The proposed method was applied to the determination of Cu and Mg in various types of samples (chemicals, hair and liver tissues) with satisfactory results.