Adsorption of the protein bovine serum albumin in a planar poly(acrylic acid) brush layer as measured by optical reflectometry

The adsorption of bovine serum albumin (BSA) in a planar poly(acrylic acid) (PAA) brush layer has been studied by fixed-angle optical reflectometry. The influence of polymer length, grafting density, and salt concentration is studied as a function of pH. The results are compared with predictions of an analytical polyelectrolyte brush model, which incorporates charge regulation and excluded volume interactions. A maximum in adsorption is found near the point of zero charge (pzc) of the protein. At the maximum, BSA accumulates in a PAA brush to at least 30 vol %. Substantial adsorption continues above the pzc, that is, in the pH range where a net negatively charged protein adsorbs into a negatively charged brush layer, up to a critical pH value. This critical pH value decreases with increasing ionic strength. The adsorbed amount increases strongly with both increasing PAA chain length and increasing grafting density. Experimental data compare well with the analytical model without having to include a nonhomogeneous charge distribution on the protein surface. Instead, charge regulation, which implies that the protein adjusts its charge due to the negative electrostatic potential in the brush, plays an important role in the interpretation of the adsorbed amounts. Together with nonelectrostatic interactions, it explains the significant protein adsorption above the pzc.     

Interaction of dissolved proteins with spherical polyelectrolyte brushes

We consider the adsorption of bovine serum albumin (BSA) on spherical polyelectrolyte brushes (SPB). The SPB consist of a solid polystyrene core of 100nm diameter onto which linear polyelectrolyte chains (poly(acrylic acid), (PAA)) are grafted. The adsorption of BSA is studied at a pH of 6.1 at different concentrations of added salt and buffer (MES). We observe strong adsorption of BSA onto the SPB despite the effect that the particles as well as the dissolved BSA are charged negatively. The adsorption of BSA is strongest at low salt concentration and decreases drastically with increasing amounts of added salt. The adsorbed protein can be washed out again by raising the ionic strength. The various driving forces for the adsorption are discussed. It is demonstrated that the main driving force is located in the electrostatic interaction of the protein with the brush layer of the particles. All data show that the SPB present a new class of carrier particles whose interaction with proteins can be tuned in a well-defined manner.     

刷状结构的阳离子性接枝微粒QPDMAEMA/SiO_2对牛血清白蛋白的吸附特性

以微米级硅胶微粒为基质,通过接枝聚合和大分子反应,制备了具有刷状结构的阳离子性接枝微粒,深入研究了其对牛血清白蛋白(BSA)的强吸附能力、吸附机理和吸附热力学.首先使含叔胺基团的单体甲基丙烯酸二甲基氨基乙酯(DMAEMA)在硅胶微粒表面发生接枝聚合,制得接枝微粒PDMAEMA/SiO2,然后以氯乙胺为试剂,使接枝大分子PDMAEMA链中的叔胺基团发生季铵化反应,获得了具有刷状结构的阳离子聚电解质的功能接枝微粒QPDMAEMA/SiO2.测定了微粒QPDMAEMA/SiO2的zeta电位,实施了对BSA的等温吸附实验,考察了介质pH值、离子强度及温度对吸附作用的影响,研究了吸附热力学.研究结果表明,功能接枝微粒QPDMAEMA/SiO2比接枝微粒PDMAEMA/SiO2具有更高的zeta电位,在静电相互作用驱动下,微粒QPDMAEMA/SiO2对BSA具有很强的吸附能力.吸附容量随介质pH值的增大呈现先增大后减小的变化趋势,当pH值等于BSA的等电点(pI=4.7)时,具有最高的吸附容量(高达112 mg?g-1).以等电点为界,离子强度对吸附容量会产生完全相反的影响作用:当介质pH值小于BSA的等电点时,电解质浓度增大,吸附容量增高;当介质pH值等于BSA的等电点时,吸附容量几乎不随电解质的浓度发生变化.吸附过程熵值减小而且放出热量,是一个焓驱动的吸附过程.     

Temperature-induced unfolding of ribonuclease A embedded in spherical polyelectrolyte brushes

We use Fourier Transform infrared spectroscopy (FT-IR) spectroscopy to study the thermal unfolding and refolding behavior of ribonuclease (RNase A) adsorbed to spherical polyelectrolyte brushes (SPB). The SPB consist of a solid poly(styrene) core of ca. 100 nm diameter onto which long chains of poly(styrene sulfonic acid), PSS have been densely attached. The particles bearing the adsorbed protein are dispersed in aqueous buffer solution at a pH close to the isoelectric point (9.6) of the protein. The secondary structure of the protein was analyzed by FT-IR spectroscopy and compared to the structure of the native protein before adsorption. The unfolding of the free RNase A in solution was found to be fully reversible with an unfolding temperature of 65 degrees C, in accordance to previous studies. However, after adsorption to the SPB, the unfolding temperature of the protein molecule is lowered by 10 degrees C and the Van't Hoff enthalpy of the unfolding process is significantly reduced. Moreover the unfolding of the adsorbed protein is irreversible. The phenomenon may be explained by an increase in binding sites due to unfolding of the globular structure. Protein adsorption to a spherical polyelectrolyte brush.     

刷状结构的阳离子性接枝微粒QPDMAEMA/SiO2对牛血清白蛋白的吸附特性

以微米级硅胶微粒为基质, 通过接枝聚合和大分子反应, 制备了具有刷状结构的阳离子性接枝微粒, 深入研究了其对牛血清白蛋白(BSA)的强吸附能力、吸附机理和吸附热力学. 首先使含叔胺基团的单体甲基丙烯酸二甲基氨基乙酯(DMAEMA)在硅胶微粒表面发生接枝聚合, 制得接枝微粒PDMAEMA/SiO₂, 然后以氯乙胺为试剂, 使接枝大分子PDMAEMA链中的叔胺基团发生季铵化反应, 获得了具有刷状结构的阳离子聚电解质的功能接枝微粒QPDMAEMA/SiO₂. 测定了微粒QPDMAEMA/SiO₂的zeta 电位, 实施了对BSA的等温吸附实验, 考察了介质pH值、离子强度及温度对吸附作用的影响, 研究了吸附热力学. 研究结果表明, 功能接枝微粒QPDMAEMA/SiO₂ 比接枝微粒PDMAEMA/SiO₂ 具有更高的zeta 电位, 在静电相互作用驱动下, 微粒QPDMAEMA/SiO₂对BSA具有很强的吸附能力. 吸附容量随介质pH值的增大呈现先增大后减小的变化趋势,当pH值等于BSA的等电点(pI=4.7)时, 具有最高的吸附容量(高达112 mg·g^-1). 以等电点为界, 离子强度对吸附容量会产生完全相反的影响作用: 当介质pH值小于BSA的等电点时, 电解质浓度增大, 吸附容量增高; 当介质pH值等于BSA的等电点时, 吸附容量几乎不随电解质的浓度发生变化. 吸附过程熵值减小而且放出热量,是一个焓驱动的吸附过程.     

Influence of sodium polystyrene sulfonate on dynamic surface properties of bovine serum albumin solutions

Dynamic surface elasticity of solutions of bovine serum albumin (BSA)/sodium polystyrene sulfonate (PSS) complexes has been measured as depending on the age of a surface, polyelectrolyte concentration, and solution pH by the oscillating-ring method. At pH values below the isoelectric point of BSA, the rate of variations in the surface properties increases due to a decrease in the electrostatic adsorption barrier as a result of a reduction in the total charge of the protein/polyelectrolyte complex. Therewith, a local maximum arises in the kinetic dependences of the surface elasticity, this maximum indicating the onset of the breakage of the tertiary structure of the protein in the surface layer. In the pH range corresponding to like charges of the protein and polyelectrolyte, variations in the surface properties slow down. In this case, the BSA/PSS complex is also formed via the interaction of PSS with those domains of globule surface that carry a charge opposite to the total charge of a protein molecule. A higher negative charge of the complex than that of protein globules increases the electrostatic adsorption barrier and decelerates variations in the surface properties. At the same time, the dependences of the surface elasticity on the surface pressure coincide with the dependences for the protein solution. Hence, the polyelectrolyte-protein interaction affects only the adsorption kinetics, while the surface properties in the vicinity of equilibrium are governed by adsorbed protein globules.     

Selective uptake of different proteins by annealed and quenched cationic spherical polyelectrolyte brushes

The selective uptake of bovine serum albumin (BSA) and β-glucosidase (β-G) by annealed and quenched cationic spherical polyelectrolyte brushes (SPB) was systematically studied by combining turbidimetric titration, dynamic light scattering and small angle X-ray scattering (SAXS). These two kinds of SPB consist of a same polystyrene core and a dense shell of poly (2-aminoethyl methacrylate hydrochloride) (PAEMH) and poly [2-(methacryloyloxy) ethyl] trimethylammonium chloride (PMAETA), respectively. Results reveal that the adsorption/desorption of proteins on SPB can be easily controlled by changing external conditions (pH and ionic strength). For a particular annealed or quenched SPB, there is a significant difference of the interaction pH regions between the brush and the two proteins, and this difference can be tuned by ionic strength. At low ionic strength, quenched brushes were more suitable for selective adsorption of BSA and β-G, while annealed brushes performed better at high ionic strength. SAXS analysis demonstrated that volume exclusion effect played a remarkable role in protein uptake by both SPB, and larger proteins were more likely to be adsorbed on the outer layer of the brush. The unique core-shell structure and controllable chain types make SPB an excellent candidate in selective adsorption/separation of proteins of different sizes.     

Controllable immobilization of proteins in quenched spherical polyelectrolyte brushes as observed by fluorescence spectroscopy and small angle X-ray scattering

The immobilization of lysozymes (pI = 11) onto anionic spherical polyelectrolyte brushes (SPB) which consist of a solid polystyrene core and a densely grafted poly(styrene sulfonate) (PSS) shell was systematically studied by fluorescence spectroscopy and small angle X-ray scattering. Results show that the capture of lysozyme by PSS brush is a dynamic process, which involves a quick agglomeration stage and a slow rearrangement one. And lysozyme inclines to immobilize in the inner layer of the brush, and saturation of lysozyme adsorption onto the SPB is gradually reached as the protein concentration increases, proceeding from the inside to the outside of the brush layers. As increasing the pH and ionic strength, the lysozyme previously adsorbed will be partially released and migrate from the inner to the outer layer of SPB. Last competitive adsorption tests between lysozyme and BSA or β-glucosidase were performed, indicating that besides electrostatic interaction counterion release force also plays an important role in protein adsorption. SPB was proved to be ideal candidate for controllable immobilization of protein, which can be extended into various applications, such as drug delivery and protein separation. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1577–1588     

Probing protein adsorption onto mercaptoundecanoic acid stabilized gold nanoparticles and surfaces by quartz crystal microbalance and zeta-potential measurements

The adsorption characteristics of three proteins [bovine serum albumin (BSA), myoglobin (Mb), and cytochrome c (CytC)] onto self-assembled monolayers of mercaptoundecanoic acid (MUA) on both gold nanoparticles (AuNP) and gold surfaces (Au) are described. The combination of quartz crystal microbalance measurements with dissipation (QCM-D) and pH titrations of the zeta-potential provide information on layer structure, surface coverage, and potential. All three proteins formed adsorption layers consisting of an irreversibly adsorbed fraction and a reversibly adsorbed fraction. BSA showed the highest affinity for the MUA/Au, forming an irreversibly adsorbed rigid monolayer with a side-down orientation and packing close to that expected in the jamming limit. In addition, BSA showed a large change in the adsorbed mass due to reversibly bound protein. The data indicate that the irreversibly adsorbed fraction of CytC is a monolayer structure, whereas the irreversibly adsorbed Mb is present in form of a bilayer. The observation of stable BSA complexes on MUA/AuNPs at the isoelectric point by zeta-potential measurements demonstrates that BSA can sterically stabilize MUA/AuNP. On the other hand, MUA/AuNP coated with either Mb or CytC formed a reversible flocculated state at the isoelectric point. The colloidal stability differences may be correlated with weaker binding in the reversibly bound overlayer in the case of Mb and CytC as compared to BSA.     

树脂填充聚醚砜纤维吸附剂对牛血清蛋白吸附性能的研究

重点研究树脂填充聚醚砜(PES)纤维吸附剂与模型蛋白质牛血清蛋白(BSA)之间的吸附与脱附行为.结果表明,蛋白质BSA在树脂填充PES纤维吸附剂中的平衡吸附过程较好地符合朗格缪尔吸附模型,树脂Lewatit CNP80ws填充PES吸附剂的最大吸附容量约为139mg BSA/g吸附剂.表面具有开孔结构的树脂填充PES纤维吸附剂的吸附速率较快,在不同结构纤维吸附剂中BSA的扩散系数在1·82×10-14~8·7×10-14m2/s范围内变化.另外,考察了BSA溶液的pH与洗脱剂等因素对吸附剂吸附与脱附性能的影响,研究结果对蛋白质的实际分离纯化具有重要的参考价值.     

In-situ investigation of the adsorption of globular model proteins on stimuli-responsive binary polyelectrolyte brushes

Binary brushes constituted from two incompatible polymers can be used in the form of ultrathin polymeric layers as a versatile tool for surface engineering to tune physicochemical surface characteristics such as wettability, surface charge, chemical composition, and morphology and furthermore to create responsive surface properties. Mixed brushes of oppositely charged weak polyelectrolytes represent a special case of responding surfaces that are sensitive to changes in the pH value of the aqueous environment and therefore represent interesting tools for biosurface engineering. The polyelectrolyte brushes used for this study were composed of two oppositely charged polyelelctrolytes poly(2-vinylpyridine) (P2VP) and poly(acrylic acid) (PAA). The in-situ properties and surface characteristics such as as surface charge, surface tension, and extent of swelling of these brush layers are functions of the pH value of the surrounding aqueous solution. To test the behavior of the mixed polylelctrolyte brushes in contact with biosystems, protein adsorption experiments with globular model proteins were performed at different pH values and salt concentrations (confinement of counterions) of the buffer solutions. The influence of the pH value, buffer salt concentration, and isoelectric points (IEP) of the brush and protein on the adsorbed amount and the interfacial tension during protein adsorption as well as the protein adsorption mechanism postulated in reference to recently developed theories of protein adsorption on polyelectrolyte brushes is discussed. In the salted regime, protein adsorption was found to be similar to the often-described adsorption at hydrophobic surfaces. However, in the osmotic regime the balance of electrostatic repulsion and a strong entropic driving force, "counterion release", was found to be the main influence on protein adsorption.     

Characterization of a planar poly(acrylic acid) brush as a materials coating for controlled protein immobilization

The adsorption of two different proteins at a planar poly(acrylic acid) (PAA) brush was studied as a function of the ionic strength of the protein solutions applying total internal reflection fluorescence (TIRF) spectroscopy. Planar PAA brushes were prepared with a grafting density of 0.11 nm(-2) and were characterized using X-ray reflectometry. Hen egg-white lysozyme and bovine serum albumin (BSA) were used as model proteins, which have a net positive and negative charge at neutral pH-values, respectively. It has been found that both proteins adsorb strongly at a planar PAA brush at low ionic strength. Whereas lysozyme interacts with a PAA brush under electrostatic attraction at neutral pH-values, BSA binds under electrostatic repulsion at pH > 5. Even at pH = 8, significant amounts of BSA are adsorbed to a planar PAA brush. In addition, the reversibility of BSA adsorption has been characterized. Dilution of a BSA solution leads to an almost complete desorption of BSA from a PAA brush at short contact times. When the ionic strength of the protein solutions is increased to about 100-200 mM, a planar PAA brush appears largely protein-resistant, regardless of the protein net charge. The results of this study indicate that the salt-dependent protein affinity of a PAA brush represents a unique effect that must be explained by a novel protein-binding mechanism. On the basis of a recent model, it is suggested that a release of counterions is the most probable driving force for protein adsorption at a PAA brush. In a general view, this study characterizes a planar PAA brush as a new materials coating for the controlled immobilization of proteins whose use in biotechnological applications appears to be rewarding.     

Dissimilar pH-dependent adsorption features of bovine serum albumin and α-chymotrypsin on mica probed by AFM

We studied bovine serum albumin (BSA) and α-chymotrypsin adsorption onto mica surfaces over a large pH range by atomic force microscopy (AFM) measurements in liquid. Data analyses (height, roughness and roughness factor) brought new insights on the conformation of proteins in soil environments, with mica as a model of soil phyllosilicates and non-hydrophobic surfaces. Validation of AFM approach was performed on BSA, whose behavior was previously described by nuclear magnetic resonance and infra-red spectroscopic methods. Maximum adsorption was observed near the isoelectric point (IEP). A stronger interaction and a lower amount of adsorbed proteins were observed below the IEP, which contrasted with the progressive decrease of adsorption above the IEP. We then studied the adsorption of α-chymotrypsin, a proteolytic enzyme commonly found in soils. AFM pictures demonstrated a complete coverage of the mica surface at the IEP in contrast to the BSA case. Comparison of the AFM data with other indirect methods broadened the understanding of α-chymotrypsin adsorption process through the direct display of the protein adsorption patterns as a function of pH.     

Protein adsorption at the electrified air-water interface: implications on foam stability

The surface chemistry of ions, water molecules, and proteins as well as their ability to form stable networks in foams can influence and control macroscopic properties such as taste and texture of dairy products considerably. Despite the significant relevance of protein adsorption at liquid interfaces, a molecular level understanding on the arrangement of proteins at interfaces and their interactions has been elusive. Therefore, we have addressed the adsorption of the model protein bovine serum albumin (BSA) at the air-water interface with vibrational sum-frequency generation (SFG) and ellipsometry. SFG provides specific information on the composition and average orientation of molecules at interfaces, while complementary information on the thickness of the adsorbed layer can be obtained with ellipsometry. Adsorption of charged BSA proteins at the water surface leads to an electrified interface, pH dependent charging, and electric field-induced polar ordering of interfacial H(2)O and BSA. Varying the bulk pH of protein solutions changes the intensities of the protein related vibrational bands substantially, while dramatic changes in vibrational bands of interfacial H(2)O are simultaneously observed. These observations have allowed us to determine the isoelectric point of BSA directly at the electrolyte-air interface for the first time. BSA covered air-water interfaces with a pH near the isoelectric point form an amorphous network of possibly agglomerated BSA proteins. Finally, we provide a direct correlation of the molecular structure of BSA interfaces with foam stability and new information on the link between microscopic properties of BSA at water surfaces and macroscopic properties such as the stability of protein foams.     

Layer-by-Layer Construction of Novel Biofunctional Fluorescent Microparticles for Immunoassay Applications

A novel class of biofunctional fluorescent microparticles for application in immunoassays was constructed by using the layer-by-layer self-assembly method to deposit multiple layers of fluorescently labeled polyelectrolytes onto colloidal particles, followed by deposition of a protein (immunoglobulin G, IgG) layer. Microelectrophoresis experiments revealed alternating negative and positive zeta-potentials with deposition of each successive polyelectrolyte layer, indicating that the alternate electrostatic adsorption of polyelectrolytes of opposite charge was successfully achieved. Transmission electron microscopy images showed a change of the particle surface texture after polyelectrolyte multilayer deposition. Fluorescence microscopy image (FMI) analysis provided direct measurement of the fluorescence intensity of single microparticles. The observed systematic increase of the fluorescence intensity of individual microparticles with increasing polyelectrolyte layer number from FMI analysis further demonstrated the controlled regular adsorption of polyelectrolyte layers onto the polystyrene (PS) particles. Protein immobilization onto the polyelectrolyte multilayer-coated particles was verified by the different surface properties of the microparticles with respect to surface charge under pH conditions above and below the isoelectric point of the proteins. The assembly of IgG and fluorescein isothiocyanate-labeled IgG onto polyelectrolyte multilayer-coated PS microparticles and their potential use was ultimately confirmed by a solid phase immunotest. Copyright 2001 Academic Press.     

pH-dependent immobilization of proteins on surfaces functionalized by plasma-enhanced chemical vapor deposition of poly(acrylic acid)- and poly(ethylene oxide)-like films

The interaction of the proteins bovine serum albumin (BSA), lysozyme (Lys), lactoferrin (Lf), and fibronectin (Fn) with surfaces of protein-resistant poly(ethylene oxide) (PEO) and protein-adsorbing poly(acrylic acid) (PAA) fabricated by plasma-enhanced chemical vapor deposition has been studied with quartz crystal microbalance with dissipation monitoring (QCM-D). We focus on several parameters which are crucial for protein adsorption, i.e., the isoelectric point (pI) of the proteins, the pH of the solution, and the charge density of the sorbent surfaces, with the zeta-potential as a measure for the latter. The measurements reveal adsorption stages characterized by different segments in the plots of the dissipation vs frequency change. PEO remains protein-repellent for BSA, Lys, and Lf at pH 4-8.5, while weak adsorption of Fn was observed. On PAA, different stages of protein adsorption processes could be distinguished under most experimental conditions. BSA, Lys, Lf, and Fn generally exhibit a rapid initial adsorption phase on PAA, often followed by slower processes. The evaluation of the adsorption kinetics also reveals different adsorption stages, whereas the number of these stages does not always correspond to the structurally different phases as revealed by the D- f plots. The results presented here, together with information obtained in previous studies by other groups on the properties of these proteins and their interaction with surfaces, allow us to develop an adsorption scenario for each of these proteins, which takes into account electrostatic protein-surface and protein-protein interaction, but also the pH-dependent properties of the proteins, such as shape and exposure of specific domains.     

Interaction strength between proteins and polyelectrolyte brushes: a small angle X-ray scattering study

We present an investigation of β-lactoglobulin adsorption onto spherical polyelectrolyte brushes (SPBs) by small angle X-ray scattering (SAXS). The SPB consists of a polystyrene core onto which long chains of poly(styrene sulfonate) are grafted. The amount and the distribution of proteins adsorbed in the brush layer at low ionic strength can be derived from SAXS. The analysis of the SAXS data reveals additionally that some of the protein molecules form aggregates of about six monomers in the adsorbed state. Furthermore, the position and the amount of slightly bound protein can be detected by the combination of the SAXS results and the SPB loading after extensive ultrafiltration. The total amount of adsorbed protein is compared to data derived from isothermal titration calorimetry. The comparison of both sets of data demonstrates that the protein molecules in the inner layers of the spherical polyelectrolyte brush are firmly bound. Proteins located in the outer layers are only weakly bound and can be washed out by prolonged ultrafiltration.     

Structure and protein binding capacity of a planar PAA brush

We performed neutron reflectometry (NR) and total internal reflection fluorescence (TIRF) spectroscopy to characterize the structure and the protein binding capacity of a planar poly(acrylic acid) (PAA) brush at different temperatures. A PAA brush was prepared by spin-coating planar quartz or silicon wafers with a thin film of poly(styrene). Then, the diblock copolymer poly(styrene)-poly(acrylic acid) was deposited on these modified wafers using the Langmuir-Sch?fer or Langmuir-Blodgett technique. PAA grafting densities of about 0.1 chains per nm2 were obtained. The NR experiments indicate a remarkable swelling of the PAA brush in contact with a buffer solution, when it is heated to 40 degrees C for several hours. The swollen brush structure remains upon cooling back to 20 degrees C suggesting a disentanglement of the initially formed PAA brush by the temporary heating. At pD = 6.7, the protein bovine serum albumin (BSA) with a negative net charge is strongly adsorbed to the swollen PAA brush. From the scattering length density profiles obtained from the NR curves, an almost homogeneous filling of the whole PAA brush space with BSA molecules can be deduced corresponding to an average BSA volume fraction of about 7-10% and an adsorbed protein mass of about 1.4 mg m-2. By analyzing the TIRF experiments, it is found that BSA adsorption is enhanced when increasing the temperature which represents an evidence for an entropic driving force for protein adsorption. However, the mechanism of BSA adsorption at a PAA brush appears to be different at 20 and 40 degrees C.     

Influence of pH of the BSA solutions on velocity of the rising bubbles and stability of the thin liquid films and foams

Influence of pH of the BSA solutions on velocity of the rising bubbles, stability of foams, and properties of single foam and wetting films was studied. It was found that the solution pH affected significantly the BSA surface activity and properties of the protein adsorption layer under dynamic and static conditions. At pH close to the isoelectric point (pH_IEP=4.8) the BSA showed the highest surface activity. The equilibrium microscopic foam films of thicknesses of 64–80 nm, depending on the BSA concentration, were obtained at pH=5.8. Under dynamic conditions the bubble rising velocity was reduced in a highest degree and the foam formed were most stable at the solutions pH-5.8 and 4.8. Lowering the bubble velocity shows that the BSA adsorption layer was formed, which retarded fluidity of the bubble surface. When the solution pH was significantly lower (pH=3.9) or much higher (pH=10) than the pH_IEP then the BSA practically had no influence on the bubble velocity and the foam stability was drastically reduced. Moreover, the pH variations affected also the time of the three-phase contact (TPC) formation on mica surface covered by the BSA adsorption layers. These pH dependent changes in the BSA surface activity indicate that the BSA linear conformers, existing at pH far away from the pH_IEP, have much higher affinity to aqueous phase resulting from higher net electrical charge present over the extended BSA molecule conformers.     

Preparation of Functional Fluorescent Microspheres Used for HTS and Their Interaction with Biomolecules

There is considerable interest in protein adsorption onto microspheres because of its importance in a wide range of biomedical applications, such as artificial tissues and organs, drug delivery systems, biosensors, solid-phase immunoassays, immunomagnetic cell separation and immobilized enzymes or catalyst. It has been well known that the interaction between proteins and microspheres plays important roles in this process. Major interaction involved in the adsorption can be classified as electrostatic, hydrophobic and hydrogen-bonding. Indeed, adsorption of proteins onto microspheres is a complex process and often can involve many dynamic steps, from the initial attachment of the protein on the surface of microspheres to the equilibrium. Also the conformation of proteins probably occurs to a certain degree of deformation or structural change due to the large area of contact. Recently, much interest has been shown in sulfonated microspheres, since sulfonate-group itself is one of components in bio-bodies, as well as is sensitive to the change of pH or ionic strength. Indeed, so far, scanty investigations have been performed in the full range. Also few researches have involved the data on adsorption rate and the maximum amount of protein adsorbed, or the reversibility of the process and conformational change of protein adsorbed as well.In present study, BSA (bovine serum albumin) was chosen as the model protein and sulfonated PMMA [poly(methyl methacrylate)] microspheres as the matrix to investigate the adsorption process.The purpose is to show some information especially the intrinsic information involved by the adsorption process Adsorption of BSA onto sulfonated microspheres (MS) has been investigated as a function of time, protein concentration and pH. The adsorption appears to be a reversible process and the presence of sulfonate groups can play important roles in the adsorption process, so as to increase the amount of protein adsorbed and influences the interaction of BSA molecules. Fig. 1 also shows that the reciprocation between unadsorbed and adsorbed BSA or rearrangement of adsorbed BSA molecules does not produce visible change in the properties of the adsorbed protein. Close to the isoelectric point of BSA (pI 4.7), the amount of protein adsorbed exhibits a maximum. A higher or lower pH results in the significant decrease of the adsorption amount. This is related to the dependence of BSA conformations at different pH conditions.