Method of mean-mass parameters for a three-dimensional boundary layer in a flow with vorticity

When a gas flows with hypersonic velocity over a slender blunt body, the bow shock induces large entropy gradients and vorticity near the wall in the disturbed flow region (in the high-entropy layer) [1]. The boundary layer on the body develops in an essentially inhomogeneous inviscid flow, so that it is necessary to take into account the difference between the values of the gas parameters on the outer edge of the boundary layer and their values on the wall in the inviscid flow. This vortex interaction is usually accompanied by a growth in the frictional stress and heat flux at the wall [2, 3]. In three-dimensional flows in which the spreading of the gas on the windward sections of the body causes the high-entropy layer to become narrower, the vortex interaction can be expected to be particularly important. The first investigations in this direction [4–6] studied the attachment lines of a three-dimensional boundary layer. The method proposed in the present paper for calculating the heat transfer generalizes the approach realized in [5] for the attachment lines and makes it possible to take into account this effect on the complete surface of a blunt body for three-dimensional laminar, transition, or turbulent flow regime in the boundary layer.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 80–87, January–February, 1981.     

Heat transfer in the neighborhood of a point of inflection in the leading edge of a plate in hypersonic flight

A study is made of the three-dimensional flow of a viscous gas around a flat plate with an inflection in the generator of the leading edge in the case of strong interaction between the exterior hypersonic flow and the boundary layer. Numerical solutions to the problem are obtained. It is shown that near points of inflection of the profile of the leading edge of a flat wing strong self-induced secondary flows can be formed together with associated local peaks of the heat fluxes and the friction.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 40–45, May–June, 1980.     

Heat transfer at the surface of a triangular body in a hypersonic viscous gas flow

The boundary layer on a semi-infinite triangular body of power-law shape is calculated for viscous interaction with an external hypersonic flow. The results of calculating the characteristics of the three-dimensional boundary layer are presented. The formation of secondary return flows and zones of intensified heat transfer on the surface of the body in the neighborhood of lines of flow divergence is noted.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 77–82, January–February, 1988.     

Interaction of a three-dimensional boundary layer with an extensive obstacle

A special variant is considered of the theory of longitudinal—transverse interaction in which the pressure field in the perturbed region of flow forms under the influence of centrifugal forces which lead to a change in the pressure across the boundary layer. This regime of flow is realized in flow of an incompressible fluid, when the two-dimensional boundary layer developing along the smooth section of the contour of a solid body enters into interaction with a three-dimensional irregularity on the surface around which flow is taking place, a projection or a depression. On the assumption that the height of the irregularity is not great, a solution is constructed for the linearized problem of interaction. It is shown that the properties of the flow of fluid in the region of interaction, in particular the possibility of penetration of perturbations into the boundary layer in front of an irregularity, depend on the sign of the curvature exhibited by the contour of the body.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 39–48, January–February, 1988.     

Boundary-layer separation on a cooled body and interaction with a hypersonic flow

In previous papers, e.g., [1, 2], boundary-layer separation was investigated by analyzing solutions of the boundary-layer equations with a given external pressure distribution. In general, this kind of solution cannot be continued after the separation point. Study of the asymptotic behavior of solutions of the Navier-Stokes equations [3–5] shows that, in boundarylayer separation in supersonic flow over a smooth surface, the main effect on the flow in the immediate vicinity of the separation point is a large local pressure gradient induced by interaction with the external flow. The solution can be continued beyond the separation point and linked to the solutions in the other regions, located downstream [5]. Similar results for incompressible flow were recently obtained in [6]. We can assume that in general there is always a small region near the separation point in which separation is self-induced, and where the limiting solution of the Navier-Stokes equations does not contain unattainable singular points. However, this limiting slope picture can be more complex and can contain more regions where the behavior of the functions differed from that found in [3–6]. The present paper investigates separation on a body moving at hypersonic speed, where the ratio of the stagnation temperature to the body temperature is large. It is shown that both. for hypersonic and supersonic speeds the flow near the separation point is appreciably affected by the distribution of parameters over the entire unperturbed boundary layer, and not only in a narrow layer near the body, as was true in the flows studied earlier [3–6]. Regions may appear with appreciable transverse pressure drops within the zone occupied by layers of the unperturbed boundary layer. Similarity parameters are given, the boundary problems are formulated, and the results of computer calculation are presented. The concept of subcritical and supercritical boundary layers is refined, and the dependence of pressure coefficients responsible for separation on the temperature factor is established.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 99–109, November–December 1973.     

Calculation of three-dimensional boundary layer on a triangular plate of finite length in a hypersonic stream

The results are given of the calculation of a three-dimensional boundary layer on a triangular plate of finite length in a regime of strong viscous interaction with an external hypersonic stream for both symmetric flow as well as in the presence of an angle of slip. The influence of the change in the pressure on the trailing edge of the plate on the boundary layer characteristics is investigated.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 46–52, September–October, 1982.     

Interaction between the boundary layer and a supersonic flow when part of the wall is rapidly heated

There have been many theoretical studies of aspects of the unsteady interaction of an exterior inviscid flow with a boundary layer [1–9]. The mathematical flow models obtained in these studies by the method of matched asymptotic expansions describe a wide range of phenomena observed experimentally. These include boundary layer separation near the hinge of a flap, the flow in the neighborhood of the trailing edge of an oscillating airfoil [1–2], and the development and propagation of perturbations in a boundary layer excited by an oscillating wall or some other way [3–5]. The present paper studies the interaction of an unsteady boundary layer with a supersonic flow when a small part of the surface of a body in the flow is rapidly heated.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 66–70, January–February, 1984.     

Nonuniqueness of the solution of the problem of viscous interaction on an axisymmetric body

The article discusses solutions of the equations of the hypersonic boundary layer on an axisymmetric offset slender body (with a power exponent equal to 3/4), taking account of interactions with a nonviscous flow. It is shown that, in this case, the equations of the boundary layer have solutions differing from the self-similar solution corresponding to flow around a semi-infinite body. The solutions obtained are analogous to solutions for a strong interaction on a plate with slipping and triangular vanes [1–4], but are obtained over a wide range of values of the parameter of viscous interaction. An asymptotic solution is given to the problem with the approach to zero of the interaction parameter.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 41–47, September–October, 1973.The authors thank V. V. Mikhailova for discussion of the work and useful advice.     

Discontinuous solutions of an interacting three-dimensional hypersonic boundary layer

The paper is a mathematical study of the three-dimensional flow of viscous gas in a hypersonic boundary layer that develops along a flat wing whose leading edge has a step shape. The flow interacts with a flap on the wing set at a small angle. A linear solution to the problem is constructed under the assumption that the deflection angle of the flap is small and the difference between the length of the plates is of order unity. It is shown that an important part in the formation of the flow near and behind the flap may be played by the change in the pressure along the span of the wing due to the step shape of the leading edge. It is significant that although the pressure and displacement thickness are continuous functions of the transverse coordinate, the longitudinal and transverse components of the friction force have discontinuities.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 19–26, March–April, 1991.I thank V. V. Sychev and A. I. Ruban for suggesting the problem, for valuable advice, and assistance.     

Relaxation of a liquid layer under the action of capillary forces

The theory of creeping motion is used to study the relaxation of an infinite viscous fluid layer (membrane) of nonuniform thickness. The propagation of boundary perturbations in a semi-infinite layer under the action of surface-tension forces is also considered. The layer has at least one common boundary with a gas. It is found that relaxation processes of an infinite layer or the propagation of boundary perturbations inside a bounded layer are non-monotonic, and that wave-like surface perturbations always arise. Relaxation times are determined. Maximum distances are found over which separate regions of the layer can affect each other.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, Vol. 11, No. 1, pp. 73–77, January–February, 1970.The author wishes to thank V. G. Levich for discussions.     

Correlation of laminar-turbulent transition data over flat plates in supersonic/hypersonic flow including leading edge bluntness effects

The paper discusses flat plate boundary layer transition in supersonic/hypersonic flow conditions. Examination of experimental infrared thermography data illustrates the importance of the leading edge thickness and (non-) uniformity to the transition process. Such observations have triggered the collection of a wide range of experimental data on supersonic/hypersonic flat plate boundary layer transition, and a number of attempts to correlate this data with characteristic parameters including leading edge thickness. Results indicate a strong dependence of the relevant transition parameters on the pressure field in the transition region, as this is determined by the combined effects of leading edge thickness and boundary layer growth/viscous interaction, and particularly on the relative importance of the two effects. In fact, two distinct correlation zones are established, depending on whether the pressure distribution at the onset of transition is dominated by leading edge bluntness effects or by boundary layer growth and viscous interaction, thus limiting the observed data scatter to reasonable levels.Received: 13 August 2002, Accepted: 7 February 2003, Published online: 28 April 2003     

Law of transverse sections for the three-dimensional boundary layer on a thin wing in a hypersonic stream

The investigation of three-dimensional flows in boundary layers is important to determine the aerodynamic characteristics of wings such as the heat fluxes and friction drag. However, the circumstance that interaction of the boundary layer and the wake with an inviscid stream can play a governing role for the formation of the flow diagram as a whole is more important. The three-dimensional flow on a thin delta wing in a hypersonic stream is investigated in this paper. An important singularity of hypersonic flow is the low value of the gas density in the boundary layer as compared with the density on its outer boundary. It is shown that in the general case when the pressure in the wing span direction varies mainly by an order, high transverse velocities originate because of the smallness of the density within the boundary layer. This circumstance permits expansion of the solution for smallspan wings in a series in an appropriate small parameter. The equations in each approximation depend on two variables, while the third—longitudinal—variable enters as a parameter. The zero approximation can be considered as the formulation of the law of transverse plane sections for a three-dimensional boundary layer. As a comparison with the exact solutions calculated for delta wings with power-law distributions of the wing thickness has shown, the first approximation yields a very good approximation. Furthermore, flow modes with a different direction of parabolicity on the whole wing, as well as zones in which interaction with the external stream should absolutely be taken into account, are found.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 75–84, March–April, 1976.     

Investigation of hypersonic flow of rarefied gas past wings of infinite span

In the framework of the locally self-similar approximation of the Navier-Stokes equations an investigation is made of the flow of homogeneous gas in a hypersonic viscous shock layer, including the transition region through the shock wave, on wings of infinite span with rounded leading edge. The neighborhood of the stagnation line is considered. The boundary conditions, which take into account blowing or suction of gas, are specified on the surface of the body and in the undisturbed flow. A method of numerical solution of the problem proposed by Gershbein and Kolesnikov [1] and generalized to the case of flow past wings at different angles of slip is used. A solution to the problem is found in a wide range of variation of the Reynolds numbers, the blowing (suction) parameter, and the angle of slip. Flow past wings with rounded leading edge at different angles of slip has been investigated earlier only in the framework of the boundary layer equations (see, for example, [2], which gives a brief review of early studies) or a hypersonic viscous shock layer [3].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 150–154, May–June, 1984.     

Receptivity of the inclined-cylinder attachment-line boundary layer to vortex perturbations

The receptivity of the boundary layer in the neighborhood of the attachment line of a cylinder inclined to the flow with respect to periodic vortex perturbations frozen into the stream is investigated. The problem considered simulates the interaction between external turbulence and the leading-edge swept wing boundary layer. It is shown that if the direction of the external perturbation vector is almost parallel to the leading edge, then the external perturbations are considerably strengthened at the outer boundary layer edge. This effect can cause laminar-turbulent transition on the attachment line at subcritical Reynolds numbers.Translated from Izvestiya Rossiiskoi Academii Nauk, Mekhanika Zhidkosti i Gaza, No. 6, 2004, pp. 72–85. Original Russian Text Copyright © 2004 by Ustinov.     

Boundary layer development in a gas flow with stagnation enthalpy varying across the streamlines

We consider a laminar boundary layer for which the stagnation enthalpy specified in the initial section is variable with height. Such problems arise, for example, for bodies located in the wake behind another body, for hypersonic flow past slender blunted bodies (as a result of the large transverse entropy gradients in the highentropy layer), for stepwise variation of the temperature of a surface on which there is an already developed boundary layer, for sudden expansion of the boundary layer as a result of its flow past a corner of the surface, etc.Strictly, we should in such cases solve the boundary layer equations (if the longitudinal gradients are much smaller than the transverse) with the specified initial distribution of the quantities. However, from the physical point of view, the distributed region may be broken down into two regions, the near-wall boundary layer and an outer region which is a gas flow with constant velocity and the specified initial temperature profile, whose calculation yields the edge conditions for the boundary layer. The boundary between the regions is determined from the condition of adequately smooth matching of the solutions. This approach is much preferable to the first, since it permits avoiding (within the framework of boundary layer theory) the difficulties associated with the presence of a possible singularity at the initial point of the surface due to the discontinuity of the boundary conditions at this point, and also permits using conventional boundary layer theory if the effect of the viscosity in the outer region is not significant. However, this partition requires additional justifications of the possibility of independent determination of the solution in the outer region and the determination of the edge of the boundary layer, considered as the region of influence of the wetted surface. The boundary layer in a nonuniform flow has been considered in several works for a linear initial velocity or temperature profile [1–3].It should be noted that the linear initial enthalpy or velocity profiles for constant gas properties do not undergo changes under the influence of viscosity or thermal conductivity. Thus the fundamental characteristic features noted above which are associated with the presence of the two regions and their interaction in essence cannot be investigated using these examples.In this study we obtain and analyze the exact solutions of the equations of the compressible boundary layer for a power-law variation of the initial stagnation enthalpy profile as a function of the stream function for a constant initial velocity. Here it is shown that the influence of the boundary conditions at the wall are actually localized in the near-wall boundary layer, which is similar in dimensions to the conventional velocity or thermal boundary layers. In the region which is external with relation to this layer, in accordance with the physical picture described above, the solution coincides with the solution of the Cauchy problem for the heat conduction equation, which describes the development of the initial temperature profile in an infinite steady-state flow with constant velocity.It is shown that for the sufficiently smooth initial profiles which are of interest in practice the outer flow undergoes practically no changes until we reach the inner boundary layer, and it may be calculated using the perfect gas laws.     

Interaction between a laminar mixing region and an outer flow

The interaction between a laminar mixing region and an outer flow is considered in the hypersonic approximation in terms of pressure. The dividing streamline is found under the condition that the induced pressure is the same on both sides of the mixing region [1]. Analytic solutions are obtained for the displacement thickness, the dividing streamline, and the induced pressure in the asymptotic regions of weak and strong interaction by using the local similarity approximation, which has been justified for mixed flows in [2]. The interaction parameter is determined.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 147–150, January–February, 1976.The author thanks I. N. Murzinov and V. Ya. Neiland for advice and comments.     

Three-dimensional turbulent boundary layer on a body of complex shape

Flow and heat transfer problems associated with three-dimensional compressible gas flow past a body of complex shape at a small angle of attack are investigated on the basis of a finite-difference calculation. The results of a numerical solution of the equations of the three-dimensional turbulent boundary layer are presented. The effect of the leading parameters on three-dimensional flow development and heat transfer is analyzed. The characteristic flow regions in the boundary layer are found: lines of divergence and convergence on the surface, separation zones and flow interfaces. The location of the maximum values of the heat flux and friction on the surface is determined, the behavior of the limiting streamlines on the body is described, and the intensity of the secondary flows in the boundary layer is estimated.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 25–35, September–October, 1986.     

Hypersonic viscous flow around extended bodies

The characteristic feature of flow around an extended body is the interaction of the thickened boundary layer with the external nonviscous flow. This phenomenon becomes more significant at low Reynolds numbers and high Mach numbers. Theoretical investigation of this interaction is difficult because of the presence of shock waves, which are characteristic of hypersonic velocities; the position and curvature of these shock waves depend on the state of the boundary layer developing in conditions of pronounced vorticity of the external flow. With increasing rarefaction of the flow, the problem begins to take on an elliptic character, and this necessitates the use of methods of investigation of more general form than the classical boundary-layer theory.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 164–166, March–April, 1976.The authors thank V. G. Farafonov and V. N. Arkhipov for guidance and assistance in the work.     

Three-dimensional boundary layer on a plane delta wing in the intermediate hypersonic interaction regime

The results of calculating the three-dimensional boundary layer on a plane delta wing of finite length in the intermediate hypersonic interaction regime are presented. The effect of the hypersonic interaction parameter on the gas flow in the boundary layer and the aerodynamic characteristics is investigated.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 110–116, May–June, 1991.     

“Non-free” interaction of plane shock waves and the boundary layer in the neighborhood of the leading edge of a plate with slip

The interaction between a normally impinging shock wave and the boundary layer on a plate with slip is studied in the neighborhood of the leading edge using various experimental methods, including special laser technology, to visualize the supersonic conical gas flows. It is found that in the “non-free” interaction, when the leading edge impedes the propagation of the boundary layer separation line upstream, the structure of the disturbed flow is largely identical to that in the developed “free” interaction, but with higher parameter values and gradients in the leading part of the separation zone. The fundamental property of developed separation flows, namely, coincidence of the values of the pressure “plateau” in the separation zone and the pressure behind the oblique shock above the separation zone of the turbulent boundary layer, is conserved. Moscow. e-mail: ostap@inmech.msu.su. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 3, pp. 57–69, May–June, 2000. The work was carried out with financial support from the Russian Foundation for Basic Research (project No. 97-01-00099).