Effect of Pre-Existed Form I' on the Phase Transition of Isotactic Poly-1-butene Form III under High Pressure CO2

The CO₂ plasticization effect on the isotactic poly-1-butene (iPB-1) form III with pre-existed minority form I' was investigated by using high-pressure differential scanning calorimetry (DSC). The results showed that the form III melting peak moved to a lower temperature and the melting peak area of form II generated during heating decreased with the increased CO₂ pressure. The solid-solid transition of form III to I' in the iPB-1 was mainly studied by fourier transform infrared spectroscopy (FTIR). It was claimed that the phase transition was a thermodynamic process and the pre-existed form I' in form III inhibit the phase transition of form III into I'. The influence of the pre-existed form I' on the melting behavior of the iPB-1 was also studied by DSC. It was found that the form I' also suppressed the recrystallization of form II.     

Ab initio Study of the Keto-Enol Equilibriumof Malonaldehyde

 The mechanism of the keto-enol tautomerism of malonaldehyde was studied by ab initio methods using 6-21G^** and 6-311G^** basis functions at the HF level. Two separate mechanisms were examined: through-space proton transfer in the ω-shaped form and through-space proton transfer in a sickle-shaped form obtained from the ω form by rotation. The transition state structure of the ω form is non-planar, whereas that of the sickle form is planar. The sickle form is connected with a 2^nd order saddle, indicating that there should exist a lower energy barrier, i.e. that the through-bond mechanism may be preferred. The calculated energy barriers of keto-enol tautomerism for the sickle form is twice as high as those for the omega form.     

间规聚苯乙烯同质多晶现象的研究

间规聚苯乙烯(ｓＰＳ)是由日本出光公司在1985年首先合成,由于其优良的耐热性(熔点高达270℃),立刻被认为有可能或为下一世纪最重要的工程塑料.独特的分子结构,使间规聚苯乙烯具有密度低、尺寸稳定、耐热性、耐溶剂性好等诸多优点,因而引起研究人员的广泛重视.同时,间规聚苯乙烯存在复杂的同质多晶现象,共有α、β、γ和δ四种晶型.以不同的条件从熔体结晶,间规聚苯乙烯可形成平面锯齿结构的α晶和β晶.其中,α晶属六方晶系,晶胞参数为:ａ=263ｎｍ,ｃ=078ｎｍ;β晶是斜方晶,晶胞参数为:ａ=088ｎｍ,ｂ=263ｎｍ,ｃ=078ｎｍ.与传统的全同聚丙烯…     

Ab initio Study of the Keto-Enol Equilibriumof Malonaldehyde

Summary.  The mechanism of the keto-enol tautomerism of malonaldehyde was studied by ab initio methods using 6-21G^** and 6-311G^** basis functions at the HF level. Two separate mechanisms were examined: through-space proton transfer in the ω-shaped form and through-space proton transfer in a sickle-shaped form obtained from the ω form by rotation. The transition state structure of the ω form is non-planar, whereas that of the sickle form is planar. The sickle form is connected with a 2^nd order saddle, indicating that there should exist a lower energy barrier, i.e. that the through-bond mechanism may be preferred. The calculated energy barriers of keto-enol tautomerism for the sickle form is twice as high as those for the omega form. Received January 18, 1999. Accepted (revised) August 4, 1999     

Direct formation of form I poly(1‐butene) single crystals from melt crystallization in ultrathin films

The morphologies and crystalline structures of melt‐crystallized ultrathin isotactic poly(1‐butene) films have been studied with transmission electron microscopy and electron diffraction. It is demonstrated that a bypass of form II crystallization can be achieved with an increase in its crystallization temperature. Electron microscopy observations show that melt‐grown isotactic poly(1‐butene) single crystals have a well‐shaped hexagonal form, whereas form I crystals converted from form II display the morphologies of their tetragonal precursors. Electron diffraction results indicate that, instead of the twinned hexagonal pattern of the converted form I crystal, the directly formed form I single crystals exhibit an untwinned hexagonal pattern. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2641–2645, 2002     

Biological selection of peptides for poly(l-lactide) substrates

Short peptides that recognize the alpha form of poly( l-lactide) (PLLA) crystalline films were identified from a phage-displayed peptide library. An enzyme-linked immunosorbent assay (ELISA) revealed that the apparent binding constants of the phage clones for the alpha form of PLLA were greater than those of the unselected phage library. The specificity index for the alpha form of PLLA referred to a structurally similar atactic poly(methyl methacrylate) (at-PMMA), supporting the alpha form of PLLA specific binding of the selected phage. Amino acid residues with proton-donor lateral groups and hydrophobic alkyl groups were relatively enriched in a sequence of heptapeptides on the specific phage clones, thereby suggesting the presence of hydrogen bonding as well as hydrophobic interactions between the alpha form of PLLA and the peptides. Surface plasmon resonance (SPR) analysis revealed that the binding constant of the freed c22 heptapeptide (Gln-Leu-Met-His-Asp-Tyr-Arg) for the alpha form of PLLA was greater than those for reference at-PMMA, amorphous PLLA, and the beta form of PLLA. It was found that c22 peptide can recognize slight differences in PLLA polymorphs such as a crystalline state and an arrangement of PLLA functional groups.     

Synthetic Channel-forming Peptides and Ion Selectivity

Introduction PeptidesmadeupofalternatingL andD amino acidscanformβhelicesasingramicidinAorcyclic peptidesthataggregatetoformtubes[1].Inbothcases thestructuresarehollowwithallthesidechainspro jectingoutwards.Kennedyetal.[2]postulatedthat peptideshavingthe…     

Two-dimensional structure control by molecular width variation with metal coordination

The self-assembled monolayer of bipyridine derivative 1, which has two alkyl chains on each end, at the HOPG/1-phenyloctane interface was studied by in situ scanning tunneling microscopy (STM). The detailed mechanism of a spontaneous change in the monolayer packing pattern by Pd coordination was studied. Uncomplexed 1 existed in a bent form in the monolayer, and the alkyl chains were interdigitated, whereas Pd-complexed 1 was in a straight form and the alkyl chains were not interdigitated. An intermediate state of 1 was successfully observed during metal coordination. The structure was the bent form with noninterdigitated alkyl chains. Equilibrium intermolecular distances reported from ab initio calculations indicate that the molecular width of the central aromatic part of uncomplexed 1 (7.5 A) is substantially smaller than that of the peripheral alkyl chain part (9.2 A). The bent form was suitable for covering up the surface to maximize the packing density. However, the molecular width of the aromatic unit of Pd-complexed 1 (9.1 A) was almost identical to that of the alkyl chain unit (9.2 A). Therefore, Pd-complexed 1 took the straight form in the monolayer. The observation of surface coverage by STM suggests that the bent form increases the packing density by as much as 16% compared with that of the straight form. These results indicate that the control of molecular width can be used to design molecular templates for nanostructure formation.     

Investigation on DNA assembly to neutral red-cyclodextrin complex by molecular spectroscopy

DNA assembling to neutral red (NR) and cyclodextrins (CDs)-NR inclusion complex has been investigated by means of absorption, fluorescence and resonance light scattering (RLS). Depending on the molar ratio R of NR:DNA, the binding of NR with DNA involved in two processes at pH 7.50 and ionic strength 0.0045. The first process occurs in R>2.5, where the neutral form of NR was predominant and enhanced RLS was observed, indicating the aggregation of NR neutral form molecules on the molecular surface of DNA. The second process occurs in R<2.5, where an absorption band at 540 nm and a fluorescent excitation and emission band at 550 and 607 nm respectively provided compelling evidence that the binding of NR to DNA leaded to extensive NR protonation even at pH 7.50, and that a protonated NR (the acidic form of NR) can form DNA adducts with a binding mode different from that of the unprotonated form (the neutral form of NR). The results were also illustrated by the CDs-NR supramolecular system. The experimental data showed that CDs including beta-CD, hydroxypropyl-beta-CD (HP-beta-CD) and sulfobutylether-beta-CD (SBE-beta-CD) superior to include the neutral form of NR, in addition, the inclusion complex decomposed when it bound to DNA. Thus, the decomposed NR was also protonated to form DNA adducts with intercalative mode. In fact, CDs played a role to carry guest molecule to intercalate DNA. A related mechanism is proposed.     

Quantification of pharmaceutical polymorphs and prediction of dissolution rate using theophylline tablet by terahertz spectroscopy

Theophylline has an anhydrous form and a monohydrated form, and the dissolution rate of the anhydrous form is higher than that of the monohydrated form. Terahertz (THz) spectra of theophylline tablet containing the theophylline anhydrous form, monohydrated form, microcrystalline cellulose and magnesium stearate exhibited a specific absorption peak at 0.96 THz, where the theophylline anhydrous form demonstrated an absorption peak. Additionally, the intensity of the peak at 0.96 THz gradually decreased as the proportion of the anhydrous form decreased. The multivariate data analysis was performed to correlate the THz spectra of theophylline tablets with the ratio of the theophylline anhydrous form. The calibration model used to predict the mixing ratio of the theophylline anhydrous form from the THz spectra achieved root-mean-squared errors of cross-validation (RMSECV) of 2.89%, a slope of 0.9934 and an R(2) of 0.9927. In addition, there were intentions to develop a prediction model for the dissolution rate of theophylline from the drug product. The dissolution rate of theophylline tablet was gradually delayed as the proportion of the anhydrous form was decreased. The multivariate data analysis was performed to correlate the THz spectra of theophylline tablets with the dissolution rate. The calibration model used to predict the percentage of theophylline dissolved in 45 min from the THz spectra achieved an RMSECV of 3.29%, a slope of 0.9260 and an R(2) of 0.9423. Furthermore, there were no significant differences between the predicted and measured percentages of theophylline dissolved in 45 min in the theophylline tablets that were stored at 84% relative humidity (RH) and 25 °C for 12 h or 3 d.     

Polymorphism in crystalline cinchomeronic acid

The structural relationship between the two crystal forms of cinchomeronic acid (CA 3,4-dicarboxypyridine) has been investigated by single crystal X-ray diffraction, IR and Raman spectroscopy and solid state NMR spectroscopy, showing that the two polymorphs form a monotropic system, with the orthorhombic form I being the thermodynamically stable form, while the monoclinic form II is unstable. In both forms CA crystallizes as a zwitterion and decomposes before melting. The crystal structure and spectroscopic analysis indicate that the difference in stability can be ascribed to the strength of the hydrogen-bonding patterns established by the protonated N-atom and the carboxylic/carboxylate O-atoms.     

Photochromic Properties of β-Cyclodextrin Dimer Linked by Dithienylethene

A fi-cyclodextrin dimer tethered by photoswitchable dithienylethene moieties was synthesized as a potentially tunable receptor. The dimer exhibits pronounced photochromic properties. Irradiation of the dimer in open form with UV light at 254 nm resulted in immediate photocyclization to the pink closed form; the colorless open form could be regenerated by irradiation with visible light of wavelength >460 nm. The reaction kinetics of the forward photoprocess were also studied. To investigate the binding ability of the dimer in open and closed forms, a fluorescence titration was performed. It was found that the stability constant for the binding of TSPP (meso-tetrakis (4-sulfonatophenyl)porphyrin) by the closed form of the dimer is a factor of 5 higher than that of the open form.     

Two modes of O—H...O hydrogen bonding utilized in dimorphs of racemic 6‐O‐acryloyl‐2‐O‐benzoyl‐myo‐inositol 1,3,5‐orthoformate

The title compound, C₁₇H₁₆O₈, yields conformational dimorphs [forms (I) and (II)] at room temperature, separately or concomitantly, depending on the solvent of crystallization. The yield of crystals of form (I) is always much more than that of crystals of form (II). The molecule has one donor –OH group that can make intermolecular O—H...O hydrogen bonds with one of the two acceptor C=O groups, as well as with the hydroxyl O atom; interestingly, each of the options is utilized separately in the dimorphs. The crystal structure of form (I) contains one molecule in the asymmetric unit and is organized as a planar sheet of centrosymmetric dimers via O—H...O hydrogen bonds involving the OH group and the carbonyl O atom of the acryloyl group. In the crystal structure of form (II), which contains two independent molecules in the asymmetric unit, two different O—H...O hydrogen bonds, viz. hydroxyl–hydroxyl and hydroxyl–carbonyl (benzoyl), connect the molecules in a layered arrangement. Another notable feature is the transformation of form (II) to form (I) via melt crystallization upon heating to 411 K. The higher yield of form (I) during crystallization and the thermal transition of form (II) to form (I) suggest that the association in form (I) is more highly favoured than that in form (II), which is valuable in understanding the priorities of molecular aggregation during nucleation of various polymorphs.     

Conformational, concomitant polymorphs of 4,4-diphenyl-2,5-cyclohexadienone: conformation and lattice energy compensation in the kinetic and thermodynamic forms

4,4-Diphenyl-2,5-cyclohexadienone (1) crystallized as four conformational polymorphs and a record number of 19 crystallographically independent molecules have been characterized by low-temperature X-ray diffraction: form A (P2(1), Z'=1), form B (P1, Z'=4), form C (P1, Z'=12), and form D (Pbca, Z'=2). We have now confirmed by variable-temperature powder X-ray diffraction that form A is the thermodynamic polymorph and B is the kinetic form of the enantiotropic system A-D. Differences in the packing of the molecules in these polymorphs result from different acidic C-H donors approaching the C=O acceptor in C-H...O chains and in synthons I-III, depending on the molecular conformation. The strength of the C-HO interaction in a particular structure correlates with the number of symmetry-independent conformations (Z') in that polymorph, that is, a short C-HO interaction leads to a high Z' value. Molecular conformation (Econf) and lattice energy (Ulatt) contributions compensate each other in crystal structures A, B, and D resulting in very similar total energies: Etotal of the stable form A=1.22 kcal mol(-1), the metastable form B=1.49 kcal mol(-1), and form D=1.98 kcal mol(-1). Disappeared polymorph C is postulated as a high-Z', high-energy precursor of kinetic form B. Thermodynamic form A matches with the third lowest energy frame based on the value of Ulatt determined in the crystal structure prediction (Cerius2, COMPASS) by full-body minimization. Re-ranking the calculated frames on consideration of both Econf (Spartan 04) and Ulatt energies gives a perfect match of frame #1 with stable structure A. Diphenylquinone 1 is an experimental benchmark used to validate accurate crystal structure energies of the kinetic and thermodynamic polymorphs separated by <0.3 kcal mol(-1) (approximately 1.3 kJ mol(-1)).     

Differential Polymorphic Transformation Behavior of Polybutene-1 with Multiple Isotactic Sequences

For the solid-solid transformation from form Ⅱ to form Ⅰ of isotactic polybutene-1(iPB),the temperature dependence of form Ⅰ nucleation and growth was deemed to control the transformation process.However,the relationship between formⅠ formation and form Ⅱ disappearance in the transformation process is not clear.In this work,the spontaneous crystal transformation from form Ⅱ to Ⅰ of iPB with 81 mol%mmmm sequence concentration is studied firstly by tracking the two processes,the decay of form Ⅱ and the yielding of form Ⅰ in a wide range of temperature spanning from 0℃ to 50℃ and in a long transformation time ranging from 5 min to 65 days with in situ FTIR and WAXD.Unlike the literature reports,the decay rate of form Ⅱ is firstly found to be lower than the yielding rate of form Ⅰ at all studied temperatures,especially at low transition temperature.This is attributed to the amorphous chains which locate near crystal lamella participating into the nucleation of form Ⅱ.The regular chain folding and growth of i PB form Ⅰ from amorphous chains containing short isotactic sequences also lead to an increase in crystallinity of form Ⅰ compared with that of initial form Ⅱ crystallized at 60℃.An increase in the annealing temperature results in decrease in crystallinity and increase in lamellae thickness of i PB formⅠ.     

用ab initio方法研究NaN_3的几何构型、电子结构和热力学、动力学性质

用ａｂｉｎｉｔｉｏＭＯ方法，在ＭＰ２（ｆｕｌ）／６３１１Ｇ水平下，全优化计算了叠氮化钠（ＮａＮ３）分子的线状和环状两种稳定构型及其转化过渡态的几何参数、电荷分布、分子总能量和振动频率，并研究了它们的热力学性质及转化速率常数和平衡常数．结果表明，线状比环状构型稍稳定（能量低６．０４ｋＪ／ｍｏｌ）；两者相互转化的能垒分别为１３．１５ｋＪ／ｍｏｌ（线型→环状）和７．１１ｋＪ／ｍｏｌ（环状→线型）．热力学和动力学计算均表明：ＮａＮ３通常主要以线型结构存在（占８５％以上），且随温度升高而增多（在１０００Ｋ大于９１％）．     

Nucleation of crystallization in molten isotactic polybutene-1

Droplet experiments have been performed on polybutene-1. It was found that this polymer can be cooled to room temperature without homogeneous nucleation of crystallization. It was also found that when the polymer was heterogeneously nucleated, form I (as well as form II) could be crystallized directly from the melt. The melting point of droplets crystallized in form I near room temperature decreased with increasing crystallization temperature, while the melting point of the droplets crystallized in form I at the highest temperatures increased with increasing crystallization temperature. There was a broad minimum at about 60°C. in the melting point versus crystallization temperature curve.     

The structure of hypericin in solution. Searching for hypericin's 1,6 tautomer

Hypericin in organic solvents displays two types of electronic spectra: one type which shows a distinct solvatochromic effect, the stable form, and the other, the unstable form, which lacks this property. The latter type is formed in dry nonprotic solvents (e.g. tetrahydrofuran, EtOAc) and can be converted to the stable form on addition of protic solvents. In order to establish the tautomeric structure of the unstable form we applied conventional nuclear magnetic resonance techniques as well as two-dimensional gradient-enhanced heteronuclear multiple-quantum correlation, gradient-enhanced ROESY and one-dimensional nuclear Overhauser effect difference experiments. All these techniques pointed to the fact that the unstable form has the 7,14-diketo tautomeric structure, like the stable form, and not the 1,6-diketo structure. Electronic spectroscopy indicated that the unstable form has acidic properties and therefore possesses two free OH groups at C3 and C4 at the bay region of the molecule.     

Mechanochemically Induced Conversion of Crystalline Benzamide Polymorphs by Seeding

Benzamide has been known for its polymorphism for almost 200 years. Three polymorphic forms are described. To date, it was only possible to crystallize a metastable form in a mixture together with the thermodynamically most stable form I. A complete transformation of form I into the metastable form III by mechanochemical treatment has been achieved. Catalytic amounts of nicotinamide seeds were used to activate the conversion by mechanochemical seeding. NMR experiments indicated that the nicotinamide molecules were incorporated statistically in the crystal lattice of benzamide form III during the conversion. The transformation pathway was evaluated using in situ powder X‐ray diffraction.     

Free energy changes by differential scanning calorimetry: Application to a low energy but metastable form of p-nitrotoluene

With decreasing sample size, a metastable form of p-nitrotoluene persists for increasing periods; for weights of 1 mg or less this form effectively supersedes the stable structure. It is unusual in having a lower enthalpy than the latter but this is offset by a lower melting point and the free energy is indeed greater than that of the stable form.