Photostimulated hole transport through a DNA duplex immobilized on a gold electrode

Photostimulated hole transport through DNA duplexes immobilized on gold electrodes has been investigated. By modifying a gold electrode with a DNA duplex containing a photosensitizer, we have observed a sequence-dependent cathodic photocurrent. DNA acts as a good mediator for cathodic photocurrent when appropriate sequences are selected.     

Reactivity of monolayer-protected gold nanoclusters at dye-sensitized liquid/liquid interfaces

Hexanethiolate monolayer-protected gold nanoclusters (MPCs) were used as redox quenchers at the polarizable water/1,2-dichloroethane (DCE) interface. Photocurrent responses originating from the heterogeneous quenching of photoexcited water soluble porphyrin complexes by MPCs dissolved in the DCE phase were observed. As MPCs can function as both electron acceptors and donors, the photocurrent results from the superposition of two simultaneous processes, which correspond to the oxidation and reduction of MPCs. The magnitude of the net photocurrent is essentially determined by the balance of the kinetics of these two processes, which can be controlled by tuning the Galvani potential difference between the two phases. We show that, within the available potential window, the apparent electron-transfer rate constants follow classical Butler-Volmer dependence on the applied potential difference.     

Simultaneous monitoring of protein adsorption at the solid–liquid interface from sessile solution droplets by ellipsometry and axisymmetric drop shape analysis by profile

In this paper two in situ techniques are combined to simultaneously examine protein adsorption at the solid–liquid interface from sessile solution droplets. With axisymmetric drop shape analysis by profile (ADSA-P) the change in solid–liquid interfacial tension is determined, while ellipsometry is employed to measure the amount of protein adsorbed from the same solution droplet at the solid–liquid interface. Three proteins (human serum albumin (HSA), immunoglobulin G (IgG) and fibrinogen (Fb)) were dissolved to a concentration of 0.05 mg ml⁻¹ in PBS (pH 7) and sessile droplets were placed for 2 h on a 47.8 nm thick gold coating on glass. The gold coated glass was positioned onto a quartz prism with immersion oil. The prism was aligned in a rotating analyser ellipsometer and the optical beam was thus allowed to be reflected at the hydrophobic gold surface. The ADSA-P set-up was built in 90° cross-beamed set-up around the prism. By combining the results for the adsorbed amounts and the interfacial tension changes over the two hour adsorption period, two stages in the adsorption process could be distinguished. In the first stage, the adsorbed amounts increase in correspondence with the interfacial tension changes, indicating that the interfacial tension changes are caused by adsorption, whereas in the second stage interfacial tension changes continue despite the adsorbed amounts being constant. Consequently, the second stage must be associated with conformational changes of the adsorbed proteins. For HSA and Fb, the conformational contribution to the interfacial tension changes (7.8 and 5.3 mJ m⁻², respectively) were approximately 2-fold the adsorption contribution, while for IgG both were equal around 3 mJ m⁻².     

Surface plasmon resonance-enhanced photoelectrochemical immunoassay of prostate-specific antigen based on BiOCl-Au heterojunction

Taking advantage of the high-efficiency photocurrent response of bismuth oxychloride sensitized with gold nanoparticles (BiOCl−Au) in combination with the antigen-antibody biological recognition reaction, a convenient photoelectrochemical (PEC) immunoassay (model target: prostate-specific antigen; PSA) has been fabricated. In particular, the enhanced photocurrent response could be attributed to the enhanced optical absorption of visible light from surface plasmon resonance (SPR) effect of gold nanoparticles in the hierarchical structure of BiOCl layered. To realize the biological detection process, an immunoreaction was implemented between target PSA and alkaline phosphatase (ALP)-labeled anti-PSA antibodies. With the formation of ternary sandwich immunocomplex, the carried and loaded ALP catalysed the substrate ascorbic acid 2-phosphate (AAP) to generate ascorbic acid for increasing the photocurrent intensity of BiOCl−Au/FTO. Under optimum reaction time, the photocurrent peak intensity of BiOCl−Au/FTO increased with the increasing of target PSA concentration in the range of 0.01 ng/mL to 50 ng/mL with a limit of detection (LOD) down to 2.3 pg/mL. In the photocurrent control experiment, the photocurrent of BiOCl−Au/FTO was not only higher than that of BiOCl/FTO, but also showed greater changes in photocurrent under the same target PSA concentration. Impressively, the proposed split-type PEC immunoassay was applied to detect PSA concentration in human serum samples, giving acceptable and satisfactory accuracy compared with the gold standard PSA ELISA method.     

Light-harvesting and photocurrent generation by gold electrodes modified with mixed self-assembled monolayers of boron-dipyrrin and ferrocene-porphyrin-fullerene triad

Three different kinds of mixed self-assembled monolayers have been prepared to mimic photosynthetic energy and electron transfer on a gold surface. Pyrene and boron-dipyrrin were chosen as a light-harvesting model. The mixed self-assembled monolayers of pyrene (or boron-dipyrrin) and porphyrin (energy acceptor model) reveal photoinduced singlet-singlet energy transfer from the pyrene (or boron-dipyrrin) to the porphyrin on the gold surface. The boron-dipyrrin has also been combined with a reaction center model, ferrocene-porphyrin-fullerene triad, to construct integrated artificial photosynthetic assemblies on a gold electrode using mixed monolayers of the respective self-assembled unit. The mixed self-assembled monolayers on the gold electrode have established a cascade of photoinduced energy transfer and multistep electron transfer, leading to the production of photocurrent output with the highest quantum yield (50 +/- 8%, based on the adsorbed photons) ever reported for photocurrent generation at monolayer-modified metal electrodes and across artificial membranes using donor-acceptor linked molecules. The incident photon-to-current efficiency (IPCE) of the photoelectrochemical cell at 510 and 430 nm was determined as 0.6% and 1.6%, respectively. Thus, the present system provides the first example of an artificial photosynthetic system, which not only mimics light-harvesting and charge separation processes in photosynthesis but also acts as an efficient light-to-current converter in molecular devices.     

Photoinduced electron transfer at liquid|liquid interfaces: dynamics of the heterogeneous photoreduction of quinones by self-assembled porphyrin ion pairs

The initial stages of the heterogeneous photoreduction of quinone species by self-assembled porphyrin ion pairs at the water|1,2-dichloroethane (DCE) interface have been studied by ultrafast time-resolved spectroscopy and dynamic photoelectrochemical measurements. Photoexcitation of the water-soluble ion pair formed by zinc meso-tetrakis(p-sulfonatophenyl)porphyrin (ZnTPPS(4)(-)) and zinc meso-tetrakis(N-methylpyridyl)porphyrin (ZnTMPyP(4+)) leads to a charge-separated state of the form ZnTPPS(3)(-)-ZnTMPyP(3+) within 40 ps. This charge-separated state is involved in the heterogeneous electron injection to acceptors in the organic phase in the microsecond time scale. The heterogeneous electron transfer manifests itself as photocurrent responses under potentiostatic conditions. In the case of electron acceptors such as 1,4-benzoquinone (BQ), 2,6-dichloro-1,4-benzoquinone (DCBQ), and tetrachloro-1,4-benzoquinone (TCBQ), the photocurrent responses exhibit a strong decay due to back electron transfer to the oxidized porphyrin ion pair. Interfacial protonation of the radical semiquinone also contributes to the photocurrent relaxation in the millisecond time scale. The photocurrent responses are modeled by a series of linear elementary steps, allowing estimations of the flux of heterogeneous electron injection to the acceptor species. The rate of electron transfer was studied as a function of the thermodynamic driving force, confirming that the activation energy is controlled by the solvent reorganization energy. This analysis also suggests that the effective redox potential of BQ at the liquid|liquid boundary is shifted by 0.6 V toward positive potentials with respect to the value in bulk DCE. The change of the redox potential of BQ is associated with the formation of hydrogen bonds at the liquid|liquid boundary. The relevance of this approach toward modeling the initial processes in natural photosynthetic reaction centers is briefly discussed.     

Photocurrent response after enzymatic treatment of DNA duplexes immobilized on gold electrodes: electrochemical discrimination of 5-methylcytosine modification in DNA

We demonstrate a photoelectrochemical approach to the detection of the methylation status of cytosine bases in DNA. We prepared anthraquinone (AQ) photosensitizer-tethered oligodeoxynucleotide (ODN) duplexes bearing 5-methylcytosine (mC) or the corresponding cytosine (C) at a restriction site of the ODN strand immobilized on gold electrodes, and measured their photocurrent responses arising from hole transport after enzymatic digestion. Treatment with HapII or HhaI of the duplexes bearing normal C led to strand cleavage, and the photosensitizer unit was eliminated from the ODN strand immobilized on the gold electrode, exclusively reducing the photocurrent density. With a similar treatment, the duplexes bearing mC showed higher photocurrent responses arising from hole transport through the duplex. This significant difference in the photocurrent response between mC and normal C residues in DNA on the gold electrodes is potentially applicable to the detection of mC modification in DNA.     

Molecular chirality and charge transfer through self-assembled scaffold monolayers

The effect of molecular chirality on electron transmission is explored by photoelectrochemistry. Thiol-terminated chiral scaffold molecules containing a porphyrin chromophore were self-assembled on gold surfaces to form a monolayer. Incorporation of the SAM-coated gold into an electrochemical cell and illumination with visible light generated a cathodic photocurrent. When using circularly polarized light, the photocurrent displayed an asymmetry (different magnitude of photocurrent for right versus left polarization) that changed with the molecular chirality (left- or right-handedness of the scaffold). A symmetry constraint on the electronic coupling between the porphyrin and the organic scaffold is proposed as a possible mechanism for the photocurrent asymmetry.     

Electrochemical properties of gold nanoparticles assembly at polarised liquid|liquid interfaces

Capacitance measurements of a polarised liquid|liquid interface show that the capacitance of the interface increases in the presence of an adsorbed monolayer of citrate-coated gold nanoparticles. This unusual observation can be explained by an increase of the interfacial charge density or by an increase of the interfacial corrugation. This study shows that capacitance measurements provide a method to monitor metallic film formation at ITIES.     

Photoinduced electron transfer at liquid|liquid interfaces. Part VII. Correlation between self-organisation and structure of water-soluble photoactive species

The self-organisation of a variety of dyes at the water|1,2-dichloroethane interface was studied by admittance measurements, photocurrent–potential curves and light polarisation anisotropy of the photocurrent. The heterogeneous photo-oxidation of ferrocene was studied at interfaces sensitised by Sn(IV) meso-tetra-(4-carboxyphenyl) porphyrin dichloride (SnTPPC), chlorin e-6, protoporphyrin IX (protoIX) and Fe(III) protoporphyrin IX chloride (Fe-protoIX). Cyclic voltammograms and capacitance voltage curves exhibit different features associated with the self-assembly of the dye species at the liquid|liquid boundary. In the case of SnTPPC, the capacitance curves displayed the characteristic responses commonly associated with the specific adsorption of ionic species. On the other hand, chlorin e-6, protoIX and Fe-protoIX show rather complex behaviour suggesting not only changes in the excess charge but also in the dielectric permittivity of the interface. Differences in the photocurrent efficiency were also observed under the same experimental conditions. The relative magnitude of the photocurrent responses were rationalised in terms of the phenomenological electron transfer rate constant, the photon capture cross-sections and the lifetime of the triplet state as obtained from nanosecond flash photolysis. Finally, the average molecular orientation of the adsorbed photoactive species was estimated from the photocurrent dependence on the angle of light polarisation in total internal reflection. The results show a clear correlation between the orientation of the transition dipole and the distribution of the peripheral carboxyl groups responsible for the hydrophilic nature of the dyes.     

Interfacial Tension Analysis of Oligo(ethylene glycol)-Terminated Self-Assembled Monolayers and Their Resistance to Bacterial Attachment

The fouling resistance of oligo(ethylene glycol) (OEG)-terminated self-assembled monolayers (SAMs) of alkanethiolates on gold has been well established. Although hydration of the OEG chains seems key to OEG-SAM resistance to macromolecular adsorption and cellular attachment, the details of how hydration prevents biofouling have been inferred largely through computational methods. Because OEG-SAMs of different lengths exhibit differing degrees of fouling resistance, the interactions between water and OEG-SAMs leading to fouling resistance can be deduced by comparing the properties of fouling and nonfouling OEG-SAMs. While all OEG-SAMs had similar water contact angles, contact angles taken with glycerol were able to individuate between different OEG-SAMs and between fouling and nonfouling OEG-SAMs. Subsequent estimation of surface and interfacial tension using a colloidal model showed that nonfouling surfaces are associated with an increased negative interfacial tension between those OEG-SAMs that resisted attachment and water. Further analysis of this interfacial tension experimentally confirmed current mathematical models that cite OEG-water hydrogen-bond formation as a driving force behind short-term fouling resistance. Finally, we found a correlation between solid-water interfacial tension and packing density and molecular density of ethylene glycol.     

Surface-grafted multiporphyrin arrays as light-harvesting antennae to amplify photocurrent generation

Organized multiporphyrin arrays were developed on the conductive surface by a novel coordination-directed molecular architecture aiming at efficient photoelectric conversion. The basic strategy employs the mutual coordination of two imidazolylporphyrinatozinc(II) units to form a cofacial dimer. Thus, meso,meso-linked bis(imidazolylporphyrinatozinc) (Zn2(ImP)2) was organized onto imidazolylporphyrinatozinc on the gold substrate as a self-assembled monolayer. The organized Zn2(ImP)2 bearing allyl side chains was covalently linked by ring-closing olefin metathesis catalyzed with Grubbs catalyst. Alternating coordination/metathesis reactions allow the stepwise accumulation of multiporphyrin arrays on the gold electrode. A successive increase in absorption over a wide wavelength range occurred after each accumulation step of Zn2(ImP)2 on the gold electrode, and cathodic photocurrent generation was enhanced in the aqueous electrolyte system, containing viologen as an electron carrier. The significant increase of the photocurrent indicates that the multiporphyrin array works as a "light-harvesting antenna" on the gold electrode.     

A novel strategy to assemble colloidal gold nanoparticles at the water-air interface by the vapor of formic acid

We report a novel strategy on the controlled assembly of gold nanoparticles (NPs) at the air-water interface by designing a concentration gradient of electrolytes utilizing volatile weak acidic electrolytes. Films of close-packed Au NPs can be facilely obtained by exposing citrate-protected gold colloids to the vapor of formic acid for several hours in an airtight desiccator at room temperature. Both the higher interfacial concentration of formic acid and the buffer effect of citrate solution play the key roles in the assembly. They engender a gradient distribution of hydrogen ions such that to trigger the interfacial assembly of gold NPs while preventing the bulk colloid from aggregation and coagulation. Comparative investigations have also been performed either using other volatile electrolytes like weaker acetic acid and stronger hydrochloric acid or adding an electrolyte directly into the colloids. The as-prepared films of gold NPs can serve as good substrates for surface-enhanced Raman scattering (SERS). This strategy has also been applied to the assembly of some other NPs like colloidal Pt at the air-water interface.     

直接热氧化制备氧化钛薄膜电极的研究Ⅱ.光电性能

采用电化学阻抗谱和光电响应等手段对在光照下热氧化制备的氧化钛膜的阻抗和光电性质进行了研究.结果表明,随氧化温度升高,界面电荷转移电阻减小,光电流逐渐增大,苯胺的光电催化速率降解增大.温度大于600℃后,电极的光电性能急剧降低.热氧化制备的氧化钛膜电极的结构、界面电荷转移电阻、光电流和光电催化降解苯胺的速率之间存在良好的相关性.     

掺杂纳米金粒子的火焰氧化TiO2膜的光电化学性质的研究

A nano-Au modified TiO2 electrode was prepared via the oxidation of Ti sheet in flame and subsequent modification with gold nanoparticles. The results of SEM and TEM measurements show that the Au nanoparticles are well dispersed on TiO2 surface. A near 2-fold enhancement in photocurrent was achieved upon the modification with Au nanoparticles. From the results of photocurrent and electrochemical impedance experiments it was found that the flatband potential of nano-Au/TiO2 electrode negatively shifted about 100 mV in 0.5 mol/L Na2SO4 solutions compared with that of bare TiO2 electrode. The improvement of photoelectrochemical performance was explained by the inhibition for charge recombination of photo-induced electrons and holes, and the promotion for interracial charge-transfer kinetics at nano-Au/TiO2 composite film. Such nanometal-semiconductor composite films have the potential application in improving the performance of photoelectrochemical solar cells.     

Fluorinated self-assembled monolayers: composition,structure and interfacial properties

Over the past several years, various fluorinated self-assembled monolayers (F-SAMs) on gold have been used to study the interfacial properties of fluorocarbon interfaces. This review focuses on the structures of selected F-SAMs and describes how the structures relate to various interfacial properties, such as wettability, friction, X-ray induced damage and ion-surface collisions.     

Measurement of circular dichroism spectra of liquid/liquid interface by centrifugal liquid membrane method.

The direct measurement of the circular dichroism (CD) spectra of liquid/liquid interface has been achieved for the first time by the centrifugal liquid membrane (CLM) method combined with a conventional CD spectropolarimetry. In the sample chamber of the CD spectropolarimeter, a cylindrical glass cell containing small amounts of organic and aqueous phases was rotated at ca. 7000 rpm to generate a two-phase liquid membrane with a high specific interfacial area. The CD spectra of the J-aggregate of protonated 5,10,15,20-tetraphenylporphyrin formed at the toluene/sulfuric acid interface in the rotating cell have been measured. The results demonstrated the novelty and advantages of this method.     

Photovoltaic properties of self-assembled monolayers of porphyrins and porphyrin-fullerene dyads on ITO and gold surfaces

A systematic series of ITO electrodes modified chemically with self-assembled monolayers (SAMs) of porphyrins and porphyrin-fullerene dyads have been designed to provide valuable insight into the development of artificial photosynthetic devices. First the ITO and gold electrodes modified chemically with SAMs of porphyrins with a spacer of the same number of atoms were prepared to compare the effects of energy transfer (EN) quenching of the porphyrin excited singlet states by the two electrodes. Less EN quenching was observed on the ITO electrode as compared to the EN quenching on the corresponding gold electrode, leading to remarkable enhancement of the photocurrent generation (ca. 280 times) in the porphyrin SAMs on the ITO electrode in the presence of the triethanolamine (TEA) used as a sacrificial electron donor. The porphyrin (H(2)P) was then linked with C(60) which can act as an electron acceptor to construct H(2)P-C(60) SAMs on the ITO surface in the presence of hexyl viologen (HV(2+)) used as an electron carrier in a three electrode system, denoted as ITO/H(2)P-C(60)/HV(2+)/Pt. The quantum yield of the photocurrent generation of the ITO/H(2)P-C(60)/HV(2+)/Pt system (6.4%) is 30 times larger than that of the corresponding system without C(60): ITO/H(2)P-ref/HV(2+)/Pt (0.21%). Such enhancement of photocurrent generation in the porphyrin-fullerene dyad system is ascribed to an efficient photoinduced ET from the porphyrin singlet excited state to the C(60) moiety as indicated by the fluorescence lifetime measurements and also by time-resolved transient absorption studies on the ITO systems. The surface structures of H(2)P and H(2)P-C(60) SAMs on ITO (H(2)P/ITO and H(2)P-C(60)/ITO) have been observed successfully in molecular resolution with atomic force microscopy for the first time.     

Electropolymerized polythiophene photoelectrodes with density-controlled gold nanoparticles

A polythiophene thin film was fabricated on gold nanoparticle (AuNP)-deposited indium-tin-oxide (ITO) electrodes with electropolymerization, whereas AuNPs were predeposited on the ITO surface. A photocurrent via photoexcited polythiophene increased with AuNPs which was attributed to the localized surface plasmon resonance. Investigation of the AuNP-density dependence on the relative enhancement of photocurrent revealed the maximum effect at 14% of AuNP-density, while 68% of AuNP-density exhibited smaller photocurrent than the polythiophene electrode without AuNPs. We have revealed that the effects of AuNPs saturate in the fairly low density region, and that the excess AuNPs even in the range of submonolayer resulted in the decrement of photocurrents.     

Effect of nanoparticles on the interfacial properties of liquid/liquid and liquid/air surface layers

An investigation is reported on the interfacial properties of nanometric colloidal silica dispersions in the presence of a cationic surfactant. These properties are the result of different phenomena such as the particle attachment at the interface and the surfactant adsorption at the liquid and at the particle interfaces. Since the latter strongly influences the hydrophobicity/lipophilicity of the particle, i.e., the particle affinity for the fluid interfacial environment, all those phenomena are closely correlated. The equilibrium and dynamic interfacial tensions of the liquid/air and liquid/oil interfaces have been measured as a function of the surfactant and particle concentration. The interfacial rheology of the same systems has been also investigated by measuring the dilational viscoelasticity as a function of the area perturbation frequency. These results are then crossed with the values of the surfactant adsorption on the silica particles, indirectly estimated through experiments based on the centrifugation of the dispersions. In this way it has been possible to point out the mechanisms determining the observed kinetic and equilibrium features. In particular, an important role in the mixed particle-surfactant layer reorganization is played by the Brownian transport of particles from the bulk to the interface and by the surfactant redistribution between the particle and fluid interface.