Striped‐pattern formation of a thin gold film deposited onto a stretched elastic silicone substrate

A well‐regulated striped pattern was produced on a thin gold film with the following very simple procedure. Gold was deposited by ion sputtering onto an elastic silicone sheet that was prestretched. The obtained gold film was observed without the release of the stretching. A well‐regulated striped pattern spontaneously formed on its surface. This pattern was observed over a wide area (>2 cm²) with a very small number of cracks. The wavelength of the pattern, ranging from 6 to 20 μm, could be controlled by the thickness of the gold film. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1532–1537, 2005     

Functional Zwitterionic Polymers on Surface: Structures and Applications

Zwitterionic polymers are important in a wide range of industrial, biological and medical fields. Their chemical structures include an equal amount of anion and cation groups, and such structures give rise to many unique functionalities, such as temperature response, anti‐polyelectrolyte effect, and strong hydration properties. In this review, we focus on the structures and applications of functional zwitterionic polymers on surfaces. We review three areas of applications according to the architecture of the polymeric systems: surface coating, complex solutions, and hydrogel. We review the simulation and theory work and highlight some outlooks for further development.     

Block copolymer films on patterned surfaces

We present results from a numerical study of a coarse-grained model of diblock copolymer (BCP) thin films cast on a chemically patterned surface. The patterned surface contains chemical inhomogeneities with a repeat spacing length scale comparable to the linear size of the BCP molecules. We find that the orientation of the lamellae in the thin film and the overlap of the film morphology with the preassigned surface pattern is strongly influenced by the commensurability between the bulk unconstrained lamellar size λ^*, and the linear size of the surface inhomogeneities w. PACS Numbers: 64.60.Cn, 61.41.+e, 64.60.My, 64.75.+g. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 3127–3136, 1998     

利用原位微纤化技术控制聚合物形态的研究进展

综述了利用原位微纤化技术控制聚合物形态的研究进展,简要介绍了原位微纤化共混物的概念、制备方法、影响成纤的因素及常见原位微纤化体系等,讨论了原位微纤化技术对碳纳米管(CNTs)/聚碳酸酯(PC)/聚乙烯(PE)、碳黑(CB)/对苯二甲酸乙二醇酯(PET)/PE及纳米碳酸钙(nano-CaCO3)/CB/PET/PE等体系的形态调控以及体系形态与力学性能、电学性能的关系,简要介绍了原位微纤化技术在废旧塑料回收方面的应用,最后阐述了原位微纤化技术的重要性并展望了其应用前景.     

New Light on Old Wisdoms on Molten Polymers: Conformation,Slippage and Shear Banding in Sheared Entangled and Unentangled Melts

The flow of viscoelastic materials is usually interpreted as resulting from intramolecular properties. Typically, the non‐linear flow behaviour and sluggish relaxation dynamics in entangled polymers are interpreted by a disentanglement process. This molecular interpretation has never been validated by direct observation. We report here on in situ observations of polymer melts under steady‐state shear flow using neutron scattering and particle tracking velocimetry. It is shown that the chains remain largely undeformed under steady‐state shear flow whereas wall slippage and shear‐banding are identified in both entangled and unentangled polymer melts. These observations are of prime importance; they reveal that the flow mechanism and its viscoelastic signature reflect a collective effect and not properties of individual chains.

     

Effect of methane on magnetron sputtering graphite target deposited films and tribological properties of a-C:H:Ti/a-C:H friction pairs

In this study, we prepared a-C:H films with different nanostructures at different methane flow rates. The effect of the methane flow rate on the tribological properties of 440 steel/a-C:H friction pairs and a-C:H:Ti/a-C:H friction pairs in an atmospheric environment was studied by a reciprocating friction machine. The results show that there is no relationship between the tribological properties of 440 steel/a-C:H friction pair and methane flow rate. The tribological performance of the a-C:H:Ti/a-C:H friction pair was greatly improved. In particular, in the friction pair of a-C:H:Ti/a-C:H with a methane flow rate of 20 sccm, superlubricity is shown, and the wear rate is only 4.04 × 10⁻⁹ mm³/Nm. After tribological experiments, Raman spectroscopy, XPS, and other characterization methods were used to study the relationship between the nanostructure and tribological properties of a-C:H:Ti films and a-C:H prepared with different methane flow rates. This study is great significance to the application of a-C:H:Ti/a-C:H friction pair in mechanical parts under atmospheric environment.     

End‐Anchored Polymers: Compression by Different Mechanisms and Interpenetration of Apposing Layers

Summary: This paper presents a systematic study of the compression of end‐anchored polymer layers by a variety of mechanisms. We treat layers in both good and Θ solvents, and in the range of polymer densities that is normally encountered in experiments. Our primary technique is numerical self‐consistent field (NSCF) theory. We compare the NSCF results for the different mechanisms with each other, and with those of the analytic SCF theory. For each mechanism, we calculate the density profiles, layer thicknesses, and free energies, all as functions of the degree of polymerization and surface coverage. The free energy and the deformation of each layer depend on the compression mechanism, and they can be very different from the ASCF theory. For example, the energy of compression can be as much as three times greater than the analytical SCF (ASCF) prediction, and it does not reduce to simple, universal functions of the reduced distance between the surfaces. The overall physical picture simplifies if the free energy is expressed in terms of the layer deformation, rather than the reduced surface separation. We also examine and quantify the interpenetration of layers, discuss why ASCF theory applies better to some compression mechanisms than others, and end with comments on the difficulties in extracting quantitative information from surface‐forces experiments.

Comparisons of forces of compression in a good solvent for the three different systems, as functions of D/n_b. The lower three curves are for σ* = 3, and the upper three are for σ* = 23.     

Toward a quantitative description of the anodic oxide films on aluminum

A method to quantify the composition of anodic oxide films on aluminum using Infrared Spectroscopic Ellipsometry (IRSE) is proposed. It consists of obtaining the absorption coefficient of the film as a function of wavelength. Using values of the absorption coefficients for the pure components of the film, the percentages (mole or wt%) of each component in the sample can be calculated.The method is demonstrated in a study of the structure of the oxide film on electropolished aluminum and the anodically formed barrier layer film. Both surface oxides were found to be initially a form of amorphous Al₂O₃. While the barrier film is essentially free of water as prepared, the film on electropolished aluminum contained about 25 wt% water. Hydration of both types of films by immersion in boiling water results in the formation of pseudoboehmite (AlOOH). The technique may have more general applicability to the quantitative determination of the composition of corrosion films and other surface layers on metals.     

Effect of Materials Parameters on the Shape of Face-On Lamellae in Semi-Conducting Polymers: Insights From Qualitative Theory

Polymer semiconductors frequently form crystals or mesophases with lamellae, that comprise alternating layers of stacked backbones and side chains. Controlling lamellar orientation in films is essential for obtaining efficient charge carrier transport. Herein, lamellar orientation is investigated in an application-relevant setup: lamellae assembled on a substrate that strongly favors face-on orientation, but exposed to a film surface that promotes orientation along an “easy” direction, other than face on. It is assumed that the face-on order propagates from the substrate, but the lamellae bend to reduce their surface energy. A qualitative free-energy model is developed. The deformation is investigated as a function of film thickness, effective Young modulus, anchoring coefficient, and easy direction at the free surface. The calculations highlight the importance of elastic constants – lamellae can substantially deform already when Young moduli are only an order of magnitude smaller than the values that are reported for crystals. Softer Young moduli are expected when lamellar assembly occurs in a non-solidified mesophase that can be an equilibrium or (more speculatively) a transient state prior to crystallization. The alternative scenario of a two-layered film is also evaluated, where edge-on and face-on grains form, respectively, at the free surface and substrate.     

Influence of nitroxide structure on polystyrene brushes “grafted‐from” silicon wafers

Alkoxyamine derivatives based on 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO), N‐tert‐butyl‐N‐(1‐diethylphosphono‐(2,2‐dimethylpropyl)) nitroxide (SG1) and N‐tert‐butyl‐N‐(2‐methyl‐1‐phenylpropyl) nitroxide (TIPNO) containing a C₁₁ hydrophobic spacer and a reactive triethoxysilyl polar head, were synthesized and anchored to silicon wafers by the Langmuir–Blodgett reactive deposition technique at surface pressures ranging from 15 to 32 mN/m. Polystyrene brushes (M_n ～ 8500–66,400 g/mol) were grown from the alkoxyamine functionalized silicon wafers by nitroxide mediated radical polymerization and characterized by ellipsometry and water contact angle measurements. The main parameters influencing the grafting density and the degree of stretching of the brushes are the nitroxide polarity and, therefore, the behavior of the corresponding alkoxyamines at the air/water interface of the Langmuir–Blodgett trough. Depending on the alkoxyamine chemical structure and the surface pressure during Langmuir–Blodgett deposition, polystyrene brushes with grafting densities of 0.3–1.0 chains/nm² and stretching values of 40–70% were obtained. Regarding alkoxyamines deposited at high surface pressures, size exclusion chromatography experiments performed on both cleaved polystyrene brushes and chains simultaneously grown in the bulk revealed that the polymerization degree of the bulk and surface chains are significantly different, suggesting that steric constrains affect the polymerization kinetics occurring at the silicon surface. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3367–3374, 2008     

Hierarchy of Asymmetry in Chiral Supramolecular Polymers: Toward Functional,Helical Supramolecular Structures

The formation of helical structures through the supramolecular polymerization of a variety of self-assembling units is reviewed. These scaffolds are usually obtained by efficient transfer or amplification of chirality phenomena, in which the starting self-assembling molecules possess different elements of asymmetry, such as point or axial chirality. Relevant examples of helical supramolecular structures investigated under thermodynamic control are reviewed, and the helical outcome of remarkable examples of chiral entities obtained through kinetic control are also highlighted. Finally, selected examples of flexible macroscopic chirality and catalysis are described to illustrate the applicability of helical aggregates.     

Toward High-Performance Electrochromic Conjugated Polymers: Influence of Local Chemical Environment and Side-Chain Engineering

Three homologous electrochromic conjugated polymers, each containing an asymmetric building block but decorated with distinct alkyl chains, were designed and synthesized using electrochemical polymerization in this study. The corresponding monomers, namely T610FBTT810, DT6FBT, and DT48FBT, comprise the same backbone structure, i.e., an asymmetric 5-fluorobenzo[c][1,2,5]thiadiazole unit substituted by two thiophene terminals, but were decorated with different types of alkyl chain (hexyl, 2-butyloctyl, 2-hexyldecyl, or 2-octyldecyl). The effects of the side-chain structure and asymmetric repeating unit on the optical absorption, electrochemistry, morphology, and electrochromic properties were investigated comparatively. It was found that the electrochromism conjugated polymer, originating from DT6FBT with the shortest and linear alkyl chain, exhibits the best electrochromic performance with a 25% optical contrast ratio and a 0.3 s response time. The flexible electrochromic device of PDT6FBT achieved reversible colors of navy and cyan between the neutral and oxidized states, consistent with the non-device phenomenon. These results demonstrate that subtle modification of the side chain is able to change the electrochromic properties of conjugated polymers.     

Analysis of polystyrene surface properties on thin film bonding under carbon dioxide pressure using nanoparticle embedding technique

A gold nanoparticle embedding technique is used to determine how vacuum and pressured carbon dioxide (CO₂) affect polystyrene (PS) thin film properties. The pressured CO₂ greatly increased the gold nanoparticle embedding depth, possibly due to a low cohesive energy density near the film surface. For the monodisperse PS used in this study (M_n = 214,000), two spin‐coated thin films with intimate contact can be bonded below the bulk glass transition temperature (T_g) under CO₂ pressure when the embedded depth is larger than half of the gyration radius of PS molecules. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1535–1542, 2009     

Plasma Treatment of Polymers

Abstract

Plasma treatment of polymers encompasses a variety of plasma technologies and polymeric materials for a wide range of applications and dates back to at least the 1960s. In this article we provide a brief review of the United States patent literature on plasma surface modification technologies and a brief review of the scientific literature on investigations of the effects of plasma treatment, the nature of the plasma environment, and the mechanisms that drive the plasma–surface interaction. We then discuss low‐radio‐frequency capacitively coupled nitrogen plasmas and their characteristics, suggesting that they provide significant plasma densities and populations of reactive species for effective plasma treatments on a variety of materials, particularly when placing the sample surface in the cathode sheath region. We further discuss surface chemical characterization of treated polymers, including some results on polyesters treated in capacitively coupled nitrogen plasmas driven at 40 kHz. Finally, we connect plasma characterization with surface chemical analysis by applying a surface sites model to nitrogen uptake of poly(ethylene terephthalate) (PET) and poly(ethylene naphthalate) (PEN) treated in a 40 kHz nitrogen plasma. This example serves to suggest an interesting practical approach to comparisons of plasma treatments. In addition, it suggests an approach to defining the investigations required to conclusively identify the underlying treatment mechanisms.     

Wrinkles formed on a thin gold film deposited onto stretched elastic substrates

In this article the possibility of using various elastic polymer substrates for preparing wrinkled gold films was studied. The gold film was deposited on the substrate using an ion‐sputtering technique, while the substrate was stretched and fixed on a frame. The obtained gold film had wrinkles with a striped pattern. However, whether the pattern was well regulated or not depended on the substrate material. Polydimethylsiloxane (PDMS) was the preferable material when it did not contain fillers. Materials containing fillers are not suitable for this purpose. However, double layer substrates that consist of the PDMS without fillers (the upper layer) and the material containing fillers (the lower layer) could be used to obtain a relatively well‐ordered pattern. Copyright © 2005 John Wiley & Sons, Ltd.     

Toward Sol-Gel-Processed Chemical Sensing Platforms: Effects of Dopant Addition Time on Sensor Performance

The development of new chemical and biochemical sensing schemes has been a topic of growing interest. Simplicity of preparation and mild processing conditions have made sol-gel-derived composites attractive for many chemical sensing schemes. A portion of our research centers on using sol-gel-processed materials for the development of selective sensors. Over the years we have aimed to characterize the analytical performance of these types of sol-gel-based sensing platforms. In the course of this work we recently discovered that the time (prior to casting) when the sensing chemistry is actually doped into the sol-gel processing solution plays a critical role in a given sensor's analytical performance. In this paper we report on the effects of doping time on the behavior of a model organic dopant (pyrene) sequestered within sol-gel-derived microfiber tips and films. We use O₂ as the analyte and determine the sensor sensitivity and temporal response as a function of doping time. We also quantify the local dipolarity of the immediate environment surrounding the average pyrene molecule as a function of doping time.