Effect of nitrogen-doping temperature on the structure and photocatalytic activity of the B,N-doped TiO2

B,N-TiO₂ photocatalysts were synthesized by boron doping firstly and subsequently nitrogen doping in NH₃ at variable temperatures. The effects of the nitrogen doping temperature on the structure and photocatalytic activity of the B,N-codoped TiO₂ were investigated. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-vis diffuse reflectance spectrum (DRS), electron paramagnetic resonance (EPR) and X-ray photoelectron spectroscopy (XPS). The photocatalytic activity was evaluated with photocatalytic degradation of methyl orange dye (MO) under visible light and UV-visible light irradiation. The results suggested that the boron and nitrogen can be incorporated into the TiO₂ lattice either interstitially or substitutionally or both, while the Ti-O-B-N structure plays a vital role in photocatalytic activity in visible light region. The optimal nitrogen doping temperature is 550 °C. Higher temperature may form many oxygen vacancies and Ti³⁺ species, resulting in the decrease of photocatalytic activity in visible light.     

Effects of doping La and Cu on photoinduced charge properties of TiO2 and its relationships with photocatalytic activity

The pure, 1 mol% only La or only Cu doped TiO₂ and La and Cu codoped TiO₂ were prepared by a sol-gel process. The effects of doping on photoinduced charge properties of nanosized TiO₂ were mainly investigated by means of Surface Photovoltage Spectrum (SPS) and Photoluminescence Spectrum (PL), together with their relationships with photocatalytic activity. The results show that La dopant can inhibit the phase transformation of TiO₂, meanwhile improve the separation rate of photoinduced charge carriers, and enrich the binding surface states. However, Cu dopant has a reverse effect compared to La dopant. This is responsible for the results that doping La is favorable for the increase in the photocatalytic activity for degrading the RhB solution, while doping Cu is bad to photocatalyitc reaction. In addition, codoping La and Cu cannot exhibit an obvious combination effect.     

Photocatalytic degradation of organic compounds in aqueous systems by Fe and Ho codoped TiO<Subscript>2</Subscript>

Undoped, single-doped, and codoped TiO₂ nanoparticles were prepared by the sol-gel method and characterized with X-ray diffraction (XRD), the Brunauer-Emmett-Teller (BET)-specific surface area (S_BET), UV-Vis absorption spectra (UV-Vis), and X-ray photoelectron spectroscopy (XPS). Their photocatalytic activity was evaluated by methyl orange (MO) degradation in an aqueous suspension under UV or simulated solar light illumination. XRD showed that all samples calcined at 600°C preserved the anatase structure, and doping inhibited the increase of crystallite size. The BET result revealed that doping improved the surface area of TiO₂. UV-Vis indicated that Fe³⁺-doping broadened the absorption profile of TiO₂. XPS demonstrated that doping was advantageous to absorb more surface hydroxyl groups or chemisorbed water molecules. Photocatalytic degradation showed that the photocatalytic activity of TiO₂ codoped with Fe³⁺ and Ho³⁺ ions was markedly improved. This was ascribed to the fact that there was a cooperative action in the two doped elements. Fe³⁺-doping broadens the absorption profile, improves photo utilization of TiO₂, and then generates more electronhole pairs. Ho³⁺-doping restrains the increase in grain size and retards the recombination of photo-generated electrons and holes.     

Photocatalytic degradation of methylene blue on Fe3+-doped TiO2 nanoparticles under visible light irradiation

Fe³⁺-doped TiO₂ composite nanoparticles with different doping amounts were successfully synthesized using sol-gel method and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and ultravioletvisible spectroscopy (UV-Vis) diffuse reflectance spectra (DRS). The photocatalytic degradation of methylene blue was used as a model reaction to evaluate the photocatalytic activity of Fe³⁺/TiO₂ nanoparticles under visible light irradiation. The influence of doping amount of Fe³⁺ (ω: 0.00%–3.00%) on photocatalytic activities of TiO₂ was investigated. Results show that the size of Fe³⁺/TiO₂ particles decreases with the increase of the amount of Fe³⁺ and their absorption spectra are broaden and absorption intensities are also increased. Doping Fe³⁺ can control the conversion of TiO₂ from anatase to rutile. The doping amount of Fe³⁺ remarkably affects the activity of the catalyst, and the optimum efficiency occurs at about the doping amount of 0.3%. The appropriate doping of Fe³⁺ can markedly increase the catalytic activity of TiO₂ under visible light irradiation. __________ Translated from Journal of Northwest Normal University (Natural Science), 2006, 42(6): 55–56 [译自: 西北师范大学学报(自然科学版)]     

Visible Light Photocatalytic Activity of Porphyrin Tin(IV) Sensitized TiO2 Nanoparticles for the Degradation of 4-Nitrophenol and Methyl Orange

A stable metalloporphyrin sensitized TiO₂ (Degussa P25) photocatalyst was prepared by using trans-dihydroxo[5,10,15,20-tetraphenylporphyrin]tin(IV) (SnP) as a sensitizer in a simple impregnation process. The solid diffuse reflectance ultraviolet-visible (UV-vis) spectrum of the SnP sensitized TiO₂ photocatalyst (SnP-TiO₂) indicated that there existed interaction between SnP and TiO₂. It was found that SnP-TiO₂ exhibited an enhanced visible light photocatalytic activity as compared with that over P25 for the degradation of 4-nitrophenol (4-NP) and methyl orange (MO) in aqueous solutions. The mechanism exploration showed that the degradation of MO and 4-NP experienced two different ways, that is, MO was photodegraded by reactive oxygen species and 4-NP was directly photodegraded by the excited state of SnP. Furthermore, it was found that the loading content of SnP had an important influence on the photocatalytic activity of TiO₂. The maximum photocatalytic efficiency was achieved when the contents of SnP were 25 mg and 30 mg per gram TiO₂ for MO and 4-NP, respectively. Importantly, SnP-TiO₂ was particularly stable and the photocatalytic activity was hardly decreased after being recycled seven times in the presence of oxygen, which could be attributed to the easy reductive regeneration of SnP.     

铋掺杂二氧化钛纳米颗粒的制备及其可见光催化性能

采用水热法,以纳米管钛酸为前驱物制备了Bi掺杂的TiO₂,并利用X射线衍射、透射电子显微镜、X射线光电子能谱、紫外-可见漫反射光谱等手段对样品进行了表征. 以甲基橙的光催化降解为模型反应评价了样品的可见光催化性能. 结果表明,Bi离子并没有进入TiO₂的晶格中,而是以BiOCl的形式存在. 所制得的BiOCl/TiO₂复合物对甲基橙降解表现出较优越的可见光催化活性;当Bi/Ti摩尔比为1%,水热温度为130℃时,所制催化剂的光催化性能最佳,并对光催化活性提高的机理进行了讨论. 同时,该催化剂对4-氯苯酚降解也表现出较高的光催化性能.     

A new acidic Ti sol impregnated kaolin photocatalyst: synthesis, characterization and visible light photocatalytic performance

In this study, a photocatalyst with visible light photocatalytic activity was obtained using raw materials, including commercial TiO₂, sulfuric acid, and calcined kaolin (CK). The photocatalyst was prepared via a dissolving/impregnating process, in which acidic Ti sol was obtained by initially dissolving TiO₂ particles in sulfuric acid, and then using the sol as impregnant for the CK. The prepared photocatalyst had wide spectral region and narrow band gap. In addition, the impregnation can create acid sites on the obtained composite surface and consequently improve the activity. A series of tests was performed to characterize the properties of the prepared samples. The visible light photocatalytic degradation of methyl orange (MO) in an aqueous solution was used as a probe reaction to evaluate the photocatalytic activities of the obtained samples. Under visible light irradiation, approximately 80 % of MO (with initial concentration of 20 mg/m³) was degraded in 3 h on the photocatalyst prepared by impregnating CK in acidic Ti sol, which was obtained using approximately 60 % H₂SO₄ solution followed by calcination at 400 °C. The acidity of the photocatalyst is the main factor that affects the catalytic activity of the photocatalytic degradation of MO.     

花状CeO2/TiO2异质结的构筑及光催化性能

采用溶剂热法制备了三维花状CeO₂/TiO₂异质结光催化剂,然后以甲基橙(MO)为模拟有机污染物,在氙灯照射下考察了其光催化活性。结果表明,花状结构由纳米片和纳米颗粒复合而成,纳米片上均匀地附着CeO₂颗粒。Ce/Ti的物质的量之比(n_Ce/n_Ti)和溶剂热时间影响异质结的光催化性能,当n_Ce/n_Ti=0.1、溶剂热时间为6 h时,CeO₂/TiO₂的光催化活性达到最佳,氙灯照射50 min的降解率达95%,光催化活性优于纯TiO₂,这主要是CeO₂和TiO₂形成了异质结,有利于光生电子和空穴的分离。     

原位红外光谱法研究Gd3+掺杂TiO2光催化降解乙烯性能

随着环境污染的日益严重,寻求环境友好、节能、高效的污染治理技术已成为各国科学研究者致力的目标。以TiO2半导体为主的多相光催化氧化技术因与传统污染处理技术相比具有许多优点而倍受青睐,但是,目前以TiO2为基础的光催化技术还存在量子效率低、太阳能利用率低等技术难题[1,2     

水热法制备具有高光催化活性的镧掺杂二氧化钛纳米晶

采用水热法合成钛酸钾(K₂Ti₈O₁₇)纳米棒,并将它作为前驱体水热转晶合成TiO₂纳米晶,同时通过在水热体系中引入稀土元素La³⁺实现对TiO₂的La掺杂.考察了不同条件下钛酸盐向TiO₂的转晶过程,发现水热溶液的pH值、温度以及预处理步骤对转晶过程有很大的影响.利用X射线衍射以及透射电子显微镜对样品的晶相和形貌进行了表征.利用电感耦合等离子体原子发射光谱测量了所合成的La掺杂TiO₂样品中的La含量.通过在紫外光下降解甲基橙(MO,10mg/L)测试了La掺杂TiO₂样品的光催化性能.结果表明La掺杂后TiO₂的光催化活性大大提高.在0.15mol/LLa³⁺浓度下180oC水热合成的La掺杂TiO₂样品显示了最佳的光催化活性.其对MO的光催化降解反应常数高达0.11min^-1,大约是空白TiO₂样品的9.20倍,P25TiO₂的3.69倍.     

Photocatalytic activities of C–N-doped TiO2 nanotube array/carbon nanorod composite

A C–N-doped TiO₂ nanotube (NT)/carbon nanorod composite is fabricated by chemical vapor deposition (CVD). Carbon nanorods are grown from the TiO₂ NTs, and partly graphitized, while TiO₂ is in the mixture of anatase and rutile. The C–N doping shifts the absorption edge of TiO₂ NTs to the visible light region; the formed carbon nanorods promote the charge carrier transfer from the TiO₂ surface to the electrolyte. Under the simulated solar light irradiation, the C–N-doped TiO₂ NTs show higher photocatalytic activity in the degradation of methyl orange (MO) than the undoped TiO₂ NTs.     

Microemulsion synthesis, characterization of highly visible light responsive rare Earth-doped bi(2) o(3)

In this paper, Bi₂O₃ and rare earth (La, Ce)‐doped Bi₂O₃ visible‐light‐driven photocatalysts were prepared in a Triton X‐100/n‐hexanol/cyclohexane/water reverse microemulsion. The resulting materials were characterized by X‐ray powder diffraction (XRD), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET) surface area, photoluminescence spectra (PLS) and UV–Vis diffuse reflectance spectroscopy. The XRD patterns of the as‐prepared catalysts calcined at 500°C exhibited only the characteristic peaks of monoclinic α‐Bi₂O₃. PLS analysis implied that the separation efficiency for electron‐hole has been enhanced when Bi₂O₃ was doped with rare earth. UV–Vis diffuse reflectance spectroscopy measurements presented an extension of light absorption into the visible region. The photocatalytic activity of the samples was evaluated by degradation of methyl orange (MO) and 2,4‐dichlorophenol (2,4‐DCP). The results displayed that the photocatalytic activity of rare earth‐doped Bi₂O₃ was higher than that of dopant‐free Bi₂O₃. The optimal dopant amount of La or Ce was 1.0 mol%. And the mechanisms of influence on the photocatalytic activity of the catalysts were discussed.     

Heterostructural BiOI/TiO2 composite with highly enhanced visible light photocatalytic performance

Binary BiOI/TiO₂ hybrid material was synthesized via a sol-gel method combined with chemical etching. The as-prepared powders were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-Vis diffuse reflectance spectroscopy (DRS), photoluminescence spectra (PLS) and photocurrent response tests. Under visible light (λ > 420 nm), BiOI/TiO₂ degraded methyl orange (MO) efficiently and displayed much higher photocatalytic activity than that of pure BiOI. Moreover, BiOI/TiO₂ can effectively promote photooxidation of other organic dyes like rhodamine B (RhB), crystal violet (CV) and methylene blue (MB). In addition, the quenching effects of different scavengers proved that reactive O ₂ ^? and h⁺ played the major role in the MO degradation. The photocatalytic activity enhancement of BiOI/TiO₂ is closely related to the strong absorption in the visible region, and the efficient charge separation derived from the matching band potentials between BiOI and TiO₂, as well as the low recombination rate of the electron-hole pairs due to the heterojunction formed between BiOI and TiO₂.     

掺镁钛酸钡纳米棒的水热合成和光催化性能

用水热法制备掺镁钛酸钡(Ba1-xMgxTiO3(x=0,0.10,0.20,0.30,0.40),BMT)纳米粉体。运用X射线衍射仪(XRD)、场发射扫描电子显微镜(FESEM)、透射电子显微镜(TEM)、紫外可见漫反射光谱技术(DRS)等手段对样品进行了表征,并在可见光照射下于溶液中考察了其光催化降解甲基橙反应活性。结果表明,通过控制氢氧根浓度可以得到不同形貌的纳米粉体。基于不同条件下制备的样品的微结构分析,提出了这些不同形貌的形成机制。制备出的BMT材料的带隙能约为2.61 eV。光催化反应结果表明BMT的光催化活性比掺氮TiO2高得多。OH-浓度为8 mol·L-1时制备的BMT纳米棒光催化效率最高,经可见光照射360 min,浓度为0.01 mmol·L-1甲基橙溶液的降解率可达到93.0%,且循环使用4次后,其光催化活性并没有明显降低,表明BMT是一种稳定有效的可见光催化剂.     

Studies on photocatalytic activity of Ag/TiO2 films

Ag/TiO₂ photocatalytic films were produced by hybrid sol-gel method. The photocatalytic degradation of methyl orange (MO) in aqueous solution under 365 nm irradiation on TiO₂ and Ag/TiO₂ thin films was investigated. The state and amount of Ag species within the film and the enhancement mechanism of photocatalytic activity of Ag/TiO₂ were discussed. With a loading molar ratio of Ag/Ti = 0.135 in TiO₂ film, the maximum catalytic efficiency was observed. __________ Translated from Journal of Beijing Normal University (Natural Sciences), 2005, 41(6) (in Chinese)     

不同形貌Bi4Ti3O12粒子的可控合成及光催化性能

研究了用一步水热法制备的不同形貌的钛酸铋(Bi₄Ti₃O₁₂, BIT)粒子的光学和可见光催化性能, 并对其晶体结构和微观结构用X射线衍射(XRD)、场发射扫描电子显微镜(FESEM)、透射电子显微镜(TEM)和高分辨透射电子显微镜(HRTEM)等手段进行了表征. XRD结果表明, 所制备的BIT 样品为层状钙钛矿结构. FESEM结果表明, 通过控制水热过程的反应参数可以得到不同形貌的纳米粒子. 紫外-可见漫反射光谱(UV-Vis DRS)表明BIT 样品的带隙能约为2.88-2.93 eV. 利用可见光(λ>420 nm)照射下的甲基橙(MO)降解实验评价了BIT 样品的光催化性能. 结果表明, BIT 的光催化活性比掺氮TiO₂ (N-TiO₂)高得多. 研究了形貌对BIT 光催化性能的影响. 所制备的BIT纳米带光催化效率最高, 经可见光照射360 min, 甲基橙溶液的降解率可达到95.0%.     

Synthesis of Bi-doped TiO2 Nanotubes and Enhanced Photocatalytic Activity for Hydrogen Evolution from Glycerol Solution

Bi‐doped TiO₂ nanotubes with variable Bi/Ti ratios were synthesized by hydrothermal treatment in 10 mol·L^?1 NaOH (aq.) through using Bi‐doped TiO₂ particles derived from conventional sol‐gel method as starting materials. The effects of Bi content on the morphology, textural properties, photo absorption and photocatalytic activity of TiO₂ nanotubes were investigated. The scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS) observations of the obtained samples revealed the formation of titanate nanotube structure doped with Bi, which exists as a higher oxidation state than Bi³⁺. Bi‐doping TiO₂ nanotubes exhibited an extension of light absorption into the visible region and improved photocatalytic activities for hydrogen production from a glycerol/water mixed solution as compared with pure TiO₂ nanotubes. There was an optimal Bi‐doped content for the photocatalytic hydrogen production, and high content of Bi would retard the phase transition of titanate to anatase and result in morphology change from nanotube to nanobelt, which in turn decreases the photocatlytic activity for hydrogen evolution.     

Photocatalytic applications of Au-deposited on TiO2 nanocomposite catalyst in dye degradation via photoreduction

The photocatalytic activity of gold deposited on Degussa P25 titanium dioxide (Au-DP25) in the photodegradation of methyl orange (MO) was investigated. The as-prepared materials were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and UV-vis diffuse reflectance spectroscopy (DRS) techniques. The obtained results show that the gold (Au⁰) deposited TiO₂ exhibited visible light plasmon absorption band. The degradation experiment j reveals that the catalytic activity of Au-DP25 in the degradation of MO is higher than that of commercially available Degussa P25 TiO₂ (DP25) samples. In addition, the photocatalytic ability of composite Au-DP25 was hardly decreased after a five-cycle for MO degradation. The kinetics of the MO degradation fitted well the Langmuir-Hinshelwood model.     

Structure and photocatalytic activity of Ti1?X MX O2 (M = Zr, Co and Mo) synthesized by pulverized solid state technique

A set of transition metal doped nanosized TiO₂ particles with anatase structure were synthesized by the pulverization method and their ability to photocatalytically degrade the dye Alizarin Red S was investigated. Characterization of the Zr-, Co- and Mo-doped photocatalysts was conducted with the aid of XRD, SEM, EDX, TEM, BET and spectral analysis. X-ray diffraction patterns did not reflect the appearance of any peaks due to dopants, however dopants were observed in SEM-EDX analysis. Particle sizes were in the range of 25 nm as per TEM and XRD analysis. Upon doping, a prominent decrease in surface area was observed. The percentage composition of each of the dopants was confirmed by EDX analysis. Doped samples depicted many mid-bands in the Kubelka Munk plots due to d-d transition of dopants. Experiments were conducted to compare the photocatalytic activity under identical UV and solar light exposure. Zr-doped TiO₂ at the molecular scale exhibited better photocatalytic activity in degradation of Alizarin, with a lower band-gap energy that can respond to visible light. However, Co- and Mo-doped TiO₂ appeared to suppress the photoactivity. A rise in the number of mid-bands causing effective separation or recombination of charge carriers strongly influences the rate of the degradation process.      

Synthesis of nanosized TiO2/SiO2 catalysts by the ultrasonic microemulsion method and their photocatalytic activity

Nanosized TiO₂/SiO₂ catalysts prepared by hydrolysis of titanium n-butoxide in microemulsion showed enhanced photocatalytic activity. In the presence of catalyst ME-2 and after 90 min irradiation by UV light, methylene blue was completely converted evidenced by the absence of its absorption band in the UV-Vis spectra. This catalyst demonstrated much better degradation ability than P-25 and naked TiO₂.