The Role of π Bridges in High‐Efficiency DSCs Based on Unsymmetrical Squaraines

A series of squaraine‐based sensitizers with various π bridges and anchors were prepared and examined in dye‐sensitized solar cells. The carboxylic anchor group was attached onto a squaraine dye through π bridges with and without an ethynyl spacer. DFT studies indicate that the LUMO is delocalized throughout the dyes, whilst the HOMO resides on the squaraine core. The dye that incorporates a 4,4‐di‐n‐hexyl‐cyclopentadithiophene group that is directly attached onto the π bridge, JD10 , exhibits the highest power conversion efficiency in a DSC; this result is attributed, in part, to the deaggregative properties that are associated with the gem‐di‐n‐hexyl substituents, which extend above and below the π‐conjugated dye plane. Dye JD10 demonstrates a power‐conversion efficiency of 7.3 % for liquid‐electrolyte dye‐sensitized solar cells and 7.9 % for cells that are co‐sensitized by another metal‐free dye, D35 , which substantially exceed the performance of any previously tested squaraine sensitizer. A panchromatic incident‐photon‐to‐current‐conversion efficiency curve is realized for this dye with an excellent short‐circuit current of 18.0 mA cm^?2. This current is higher than that seen for other squaraine dyes, partially owing to a high molar absorptivity of >5 000 M ^?1 cm^?1 from 400 nm to the long‐wavelength onset of 724 nm for dye JD10 .     

Duplex‐Selective Ruthenium‐Based DNA Intercalators

We report the design and synthesis of small molecules that exhibit enhanced luminescence in the presence of duplex rather than single‐stranded DNA. The local environment presented by a well‐known [Ru(dipyrido[3,2‐a:2′,3′‐c]phenazine)L₂]²⁺‐based DNA intercalator was modified by functionalizing the bipyridine ligands with esters and carboxylic acids. By systematically varying the number and charge of the pendant groups, it was determined that decreasing the electrostatic interaction between the intercalator and the anionic DNA backbone reduced single‐strand interactions and translated to better duplex specificity. In studying this class of complexes, a single Ru^II complex emerged that selectively luminesces in the presence of duplex DNA with little to no background from interacting with single‐stranded DNA. This complex shows promise as a new dye capable of selectively staining double‐ versus single‐stranded DNA in gel electrophoresis, which cannot be done with conventional SYBR dyes.     

Determination of Anionic Surfactant in Fresh Water and in Sea Water

Ion pairs formed from suitable cationic dye and anionic surfactant in water were separated by solvent extraction. The extracts were used subsequently for spectrophotometric determinations. The extraction of ion pairs with various combinations is described. Of the dyes and solvents examined, ethyl violet and p-xylene are the most useful combination as the cationic dye and extraction solvent. The extracts are determined spectrophotometrically at 611.5 nm; the molar absorptivity is 1, 01 × 10⁵ M^?1 cm^?1. The detection limit is 1.4 ppb in water. The method is simple, rapid and sensitive. It can also be applied to the determination of anionic surfactants in sea water.     

Preparation of soluble ternary heteroazo dye complexes for the spectrophotometric determination of trace uranium(VI)

The complexing ability of typical pyridylazo, quinolylazo and thiazolylazo dyes with uranium(VI) in aqueous ethanol media are investigated in the presence and absence of aromatic carboxylic acid. Uranium(VI) forms solubilized ternary complexes with PAN, PAR, TAM, 5-Br-PADAP, 3,5-diBr-PADAP and QADAP in 48% ethanol solution containing sufficient amounts of sulfosalicylic acid and triethanolamine buffer (pH 7.8). Aromatic carboxylic acids contribute to expel the coordinated water molecules from the uranium (VI) moiety and their chelating effects have been explained by ternary complex formation. An increase in molar absorptivity and no shift in the wavelength of maximum absorbance are observed for all uranium(VI) complexes investigated. The 11 stoichiometry of uranuim(VI) and heteroazo dye in the binary complex does not change through ternary complex formation. The molar absorptivity of the uranium(VI)-3,5-diBr-PADAP-sulfosalicylic acid ternary complex at 595 nm is 8.4×10⁴l mol^–1 cm^–1 and Beer's law is valid up to 2.5gmg ml^–1 of uranium(VI). The interferences due to coexisting metal ions can be effectively masked by addition of CyDTA or Ca-CyDTA.     

The design,synthesis, and characterization of D-π-A-π-A type organic dyes as sensitizers for dye-sensitized solar cells (DSSCs)

New D-π-A-π-A type organic dyes were synthesized and characterized as sensitizers for dye-sensitized solar cells (DSSCs). These dyes showed wide absorption spectra (300–625 nm) and high molar extinction coefficients (ε_467 nm = 60,911 M⁻¹ cm⁻¹). As dye sensitizers in DSSC, the D-π-A-π-A dye having a cyanoacrylic acid as an acceptor gave the best cell performance with a short-circuit photocurrent density (J_sc) of 7.14 mA/cm², an open-circuit voltage (V_oc) of 0.62 V, and a fill factor (FF) of 0.72, corresponding to an overall conversion efficiency η of 3.19%.     

Fluorescence Energy Transfer Study of Interstrand DNA Cross-linking Caused by Rigid Bisintercalator

The intermolecular cross-linking of DNA with a rigid bisintercalator, 1,4-bis(( N -methylquinolinium-4-yl)vinyl)benzene (pMQVB) has been studied using fluorescence resonance energy transfer (FRET), fluorescence anisotropy measurements, and dynamic fluorescence microscopy. Short DNA duplexes, single-labeled with fluorescein (donor) and x-rhodamine (acceptor), were used as energy transfer partners. Due to the quenching effect of pMQVB on the emission of both fluorescein and x-rhodamine, the energy transfer was monitored using the corrected Stern-Volmer plots. The cross-linking ability of pMQVB depended on the ligand structure; the planar E , E isomer cross-linked DNA contrary to the non-planar E , Z isomer. Dynamic fluorescence microscopy observation also demonstrated the ability of pMQVB to cross-link large T4 DNA molecules.     

Comparative Studies of Removal of Methyl Green and Basic Fuchsin from Wastewater by a Novel Magnetic Nanoparticles Mg-Ferrites

Adsorptions of methyl green (MG) and basic fuchsin (BF) by magnetic MgFe₂O₄ were compared in this study. Adsorption mechanism studies indicated that electrostatic interaction may play a main role for MG, but for BF, hydrogen-bond interaction may be more predominant. Kinetics data of both dyes conformed to the pseudo-second order model. The overall rate process was mainly governed by intraparticle diffusion. Comparative isotherm studies indicated that MG followed the Langmuir isotherm and BF followed the Freundlich isotherm. Thermodynamic parameters revealed that the adsorption process was endothermic (ΔH ⁰ > 0) for MG, but it was exothermic (ΔH ⁰ < 0) for BF.     

New Organic Dye Based on a 3,6‐Disubstituted Carbazole Donor for Efficient Dye‐Sensitized Solar Cells

We have synthesized and characterized four organic dyes ( 9 , 10 , H1 , H2 ) based on a 3,6‐disubstituted carbazole donor as sensitizers in dye‐sensitized solar cells. These dyes have high molar extinction coefficients and energy levels suitable for electron transfer from an electrolyte to nanocrystalline TiO₂ particles. Under standard air mass 1.5 global (AM 1.5 G) solar irradiation, a device using dye H4 exhibits a short‐circuit current density (J_sc) of 13.7 mA cm^?2, an open‐circuit voltage (V_oc) of 0.68 V, a fill factor (FF) of 0.70, and a calculated efficiency of 6.52 %. This performance is comparable to that of a reference cell based on N719 (7.30 %) under the same conditions. After 1000 hours of visible‐light soaking at 60 °C, the overall efficiency remained at 95 % of the initial value.     

Fluorescent sensor for Cu2+ with a tunable emission wavelength

A concept of fluorescent metal ion sensing with an easily tunable emission wavelength is presented and its principle demonstrated by detection of Cu(2+). A fluorescein dye was chemically modified with a metal chelating group and then attached to the terminus of ss-DNA. This was combined with a complementary ss-DNA modified with another fluorescent dye (ATTO 590), emitting at a longer wavelength. In the assembled duplex, fluorescence resonance energy transfer (FRET) between the fluorescein donor (excited at 470 nm) and the ATTO 590 acceptor (emitting at 624 nm) is observed. Proper positioning within the rigid DNA double helix prevents intramolecular contact quenching of the two dyes. Coordination of paramagnetic Cu(2+) ions by the chelating unit of the sensor results in direct fluorescence quenching of the fluorescein dye and indirect (by loss of FRET) quenching of the ATTO 590 emission at 624 nm. As a result, emission of the acceptor dye can be used for monitoring of the concentration of Cu(2+), with a 20 nM detection limit. The emission wavelength is readily tuned by replacement of ATTO-DNA by other commercially available DNA-acceptor dye conjugates. Fluorescent metal ion sensors emitting at >600 nm are very rare. The possibility of tuning the emission wavelength is important with respect to the optimization of this sensor type for application to biological samples, which usually show broad autofluorescence at <550 nm.     

Spectrophotometric Determination of Formaldehyde

ABSTRACT

A simple and very sensitive method for the determination of formaldehyde is described. Formaldehyde reacts with phloroglucinol in acid medium producing a yellow dye with λ_max at 435nm. The method is useful for the determination of formaldehyde in the range 0-2.5μg in an overall volume of 10mL with molar absorptivity of 8.3 × 10⁴1 mol^?1 cm^?1 and a relative standard deviation of 2% at 1.5μg level (n=10).     

Catalytic determination of ultratrace amounts of selenium(iv)

A new sensitive catalytic method for determining selenium(IV) is proposed. Selenium catalyzes the oxidation of p-hydrazinobenzenesulfonic acid to p-diazobenzenediazonium ion, which then is converted to a yellow azo dye by coupling with m-phenylenediamine. As little as 10^-7 M selenium(IV) can be determined easily; the effective molar absorptivity is 1.2 · 10⁶ for selenium(IV). If the azo dye is extracted into an organic solvent, the effective molar absorptivity can be increased further to 2.4· 10⁶ for selenium(IV).     

Theoretical studies on triaryamine‐based p‐type D‐D‐π‐A sensitizer

Development of triaryamine‐based nonmetallic dye sensitizers is a hot topic in the solar cell research. A series of triaryamine‐based dyes WS1 – WS7 were designed with W1 as the prototype. Density functional theory (DFT) and time‐dependent‐DFT calculations were used to investigate the effects of the attached donor D on the absorption spectra and electronic properties of the dyes. The light‐harvesting efficiency (LHE), hole injection force (ΔG_inj), dye regeneration force (ΔG_reg), and charge recombination force (ΔG_CR) for all the dyes were predicted. The insertion of D not only results in a red shift in the absorption spectra for all dyes but also achieves a broader absorption for visible light. Compared with that of the prototype, the absorption peak of the dye WS7 has a red shift of 95 nm and an oscillator strength increase of 29%. The absorption peak of WS7 is wider and stronger, and the absorption range extends to 900 nm. The LHE and ΔG_reg values of WS7 are 0.991 and ?1.49 eV, respectively. On overall evaluation, WS7 is a promising candidate of a p‐type dye sensitizer with good light absorption and dye regeneration efficiency.     

Effect of substituents,solute–solute–non-polar solvent interactions and temperature on the spectral properties of bis(dithiophosphato)copper(II) complexes

Extended studies by e.p.r. and electronic spectroscopy on the effect of different non-polar solvents, temperature and disulfide concentration on the spectral properties of bis(dithiophosphato)copper(II), Cu[(RO)₂PS₂]₂, complexes [R = Me, Et and i-Pr] are reported. The molar absorptivity and e.p.r. intensity are very sensitive to the shape and size of the remote ligand substituents and increase in the order: Me < Et < i-Pr. The nature of the solvent and time after dissolution are also important regarding the magnitude of the e.p.r. intensity and molar absorptivity which, 1 h after dissolution, do not follow Beer's law. The molar absorptivities obtained at a given Cu^II(R₂–dtp)₂ concentration increase in the solvent order: n-hexane < n-heptane < CCl₄ < PhMe < PhH < CHCl₃. Twenty-four hours after dissolution the same samples exhibit: (i) linearity between absorbance and concentration of Cu^II(R₂–dtp)₂; (ii) a significant increase in molar absorptivity which is not equal for all the complexes studied and follows the same substituent and solvent orders. Beer's law is satisfied above 5 × 10^–4 M for [(RO)₂PS₂]₂Cu (R = Et, i-Pr) and above 3 × 10^–3 M for [(MeO)₂PS₂]Cu. A significant additional increase, ca. 30–40%, of molar absorptivity, is obtained by increasing the solution temperature from 20 to 50 °C. The molar absorbtivity remains unchanged during 2–3 days after reducing the temperature. Further increase of molecular absorbtivity appears after addition of the corresponding disulfide of dithiophosphate [(RO₂)PS₂–S₂P(RO)₂] to Cu^II[(RO)₂PS₂]₂. The molar absorptivity of Cu[(i-PrO)₂PS₂]₂ increases from 4.8 × 10³ cm^–1 M^–1, 1 h after dissolving the complex up to 2 × 10⁴ cm^–1 M^–1 after addition of the corresponding disulfide. The observed effects are explained on the basis of a self-redox reaction taking place in this type of sulfur containing copper(II) complexes.     

Adsorption of acid red 114 and reactive black 5 in aqueous solutions on dendrimer‐conjugated magnetic nanoparticles

The adsorption of the dyes Acid Red 114 and Reactive Black 5 in aqueous solutions on polyhydroxyl dendrimer magnetic nanoparticles (Fe₃O₄@SiO₂‐TRIS) was studied in a batch system. The Fe₃O₄@SiO₂‐TRIS NPs were characterized by Fourier transform infrared spectroscopy, X‐ray diffraction, and transmission electron microscopy. Experiments were performed under different conditions such as the initial dye concentration, adsorbent dose, and pH. The pseudo‐second‐order model provided a very good fit for the two anionic dyes. The Langmuir and Freundlich adsorption models were used to describe the equilibrium isotherms at different temperatures, and the former agreed very well with the experimental data. However, the adsorption capacity of Fe₃O₄@SiO₂‐TRIS NPs was reduced during surface modification, which could be due to the dye occupying the binding sites of the dendrimer. Thermodynamic parameters, namely the change in free energy (ΔG⁰), enthalpy (ΔH⁰), and entropy (ΔS⁰), were also determined.     

An Extractive Spectrophotometric Method for the Determination of Nitrite Using Fluorescein Amine Isomer I

ABSTRACT

A sensitive spectrophotometric method for the determination of nitrite using fluorescein amine isomer I is described. The method is based on the formation of azido derivative of fluorescein amine isomer I, which is selectively extracted into 20% iso amyl alcohol in toluene and is stripped to aqueous phase using NaOH. Formation of the azido derivative depends on nitrite concentration and the system obeys Beer's law in the range 0-0.4 ppm of nitrite at 495 nm. The molar absorptivity of the colour system is 6.67 × 10⁴ L mol^-1 cm^-1 with a relative standard deviation of 3% for 10 determinations at 1 μg of nitrite. The proposed method is successfully applied for the determination of nitrite and nitrate in soil, water and radiator coolant sample, NO₂ gas in a laboratory fume cupboard is determined after fixing it as nitrite in sodium arsenite absorber solution.     

Analysis of the interaction of ethidium bromide with a DNA octamer 5’-d(GpApCpApTpGpTpC) in aqueous solution using1H NMR data

Complexation of a phenanthridine dye ethidium bromide with a desoxyoligonucleotide 5’-d(GpApCpAp-TpGpTpC) in aqueous salt solution is studied by one- and two-dimensional¹H NMR spectroscopy. Two-dimensional correlated homonuclear PMR spectroscopy (2D-TOCSY and 2D-N0ESY) was used for complete assignment of the proton signals of molecules in solution and for qualitative analysis of the character of interaction between ethidium bromide and desoxyoctanucleotide. The concentration dependences of the proton chemical shifts of the molecules were measured at three temperatures (T₁ = 298 K, T₂ = 308 K, and T₃ = 318 K); the temperature dependences were measured in the temperature range 278–358 K. Different schemes of dye complexation with an octamer duplex involving different molecular associates in solution are considered. The equilibrium constants of the reactions, the corresponding thermodynamic parameters (δH⁰, δS₀), and the limiting values of the chemical shifts of ethidium bromide protons in the complexes are determined. The relative contents of complexes of different types in solution (dye complexes with desoxyoctanucleotide in duplex form) are analyzed, and peculiarities of the dynamic equilibrium depending on the ratio of dye and octamer concentrations and temperature are established. The most probable structures of the 1:2 and 2:2 intercalated complexes corresponding to dye intercalation into the pyrimidine-purine sites of the desoxyoctanucleotide duplex are derived using the calculated values of the induced proton chemical shifts of ethidium bromide and two-dimensional PMR data. Translated fromZhurnal Strukturnoi Khimii, Vol.40, No. 2, pp. 265–275, March–April, 1999.     

Asymmetric Distyrylpyridinium Dyes as Red‐Emitting Fluorescent Probes for Quadruplex DNA

The interactions of three cationic distyryl dyes, namely 2,4‐bis(4‐dimethylaminostyryl)‐1‐methylpyridinium ( 1 a ), its derivative with a quaternary aminoalkyl chain ( 1 b ), and the symmetric 2,6‐bis(4‐dimethylaminostyryl)‐1‐methylpyridinium ( 2 a ), with several quadruplex and duplex nucleic acids were studied with the aim to establish the influence of the geometry of the dyes on their DNA‐binding and DNA‐probing properties. The results from spectrofluorimetric titrations and thermal denaturation experiments provide evidence that asymmetric (2,4‐disubstituted) dyes 1 a and 1 b bind to quadruplex DNA structures with a near‐micromolar affinity and a fair selectivity with respect to double‐stranded (ds) DNA [K_a(G4)/K_a(ds)=2.5–8.4]. At the same time, the fluorescence of both dyes is selectively increased in the presence of quadruplex DNAs (more than 80–100‐fold in the case of human telomeric quadruplex), even in the presence of an excess of competing double‐stranded DNA. This optical selectivity allows these dyes to be used as quadruplex‐DNA‐selective probes in solution and stains in polyacrylamide gels. In contrast, the symmetric analogue 2 a displays a strong binding preference for double‐stranded DNA [K_a(ds)/K_a(G4)=40–100), presumably due to binding in the minor groove. In addition, 2 a is not able to discriminate between quadruplex and duplex DNA, as its fluorescence is increased equally well (20–50‐fold) in the presence of both structures. This study emphasizes and rationalizes the strong impact of subtle structural variations on both DNA‐recognition properties and fluorimetric response of organic dyes.     

Dye‐Sensitized Solar Cells Based on a Donor–Acceptor System with a Pyridine Cation as an Electron‐Withdrawing Anchoring Group

New hemicyanine dyes ( CM101 , CM102 , CM103 , and CM104 ) in which tetrahydroquinoline derivatives are used as electron donors and N‐(carboxymethyl)‐pyridinium is used as an electron acceptor and anchoring group were designed and synthesized for dye‐sensitized solar cells (DSSCs). Compared with corresponding dyes that have cyanoacetic acid as the acceptor, N‐(carboxymethyl)‐pyridinium has a stronger electron‐withdrawing ability, which causes the absorption maximum of dyes to be redshifted. The photovoltaic performance of the DSSCs based on dyes CM101 – CM104 markedly depends on the molecular structures of the dyes in terms of the n‐hexyl chains and methoxyl. The device sensitized by dye CM104 achieved the best conversion efficiency of 7.0 % (J_sc=13.4 mA cm^?2, V_oc=704 mV, FF=74.8 %) under AM 1.5 irradiation (100 mW cm^?2). In contrast, the device sensitized by reference dye CMR104 with the same donor but the cyanoacetic acid as the acceptor gave an efficiency of 3.4 % (J_sc=6.2 mA cm^?2, V_oc=730 mV, FF=74.8 %). Under the same conditions, the cell fabricated with N719 sensitized porous TiO₂ exhibited an efficiency of 7.9 % (J_sc=15.4 mA cm^?2, V_oc=723 mV, FF=72.3 %). The dyes CM101 – CM104 show a broader spectral response compared with the reference dyes CMR101 – CMR104 and have high IPCE exceeding 90 % from 450 to 580 nm. Considering the reflection of sunlight, the photoelectric conversion efficiency could be almost 100 % during this region.     

Extractive spectrophotometric determination of trace amounts of nitrogen dioxide,nitrite, and nitrate

A sensitive extractive spectrophotometric method for the determination of nitrogen dioxide in air and nitrite and nitrate in water, soil and blood serum is described. Nitrogen dioxide in air is fixed as nitrite in a suitable trapping solution. The method is based on the diazo coupling reaction betweenp-nitroaniline andN-(1-naphthyl)ethylenediamme dihydrochloride [NEDA]. The azo dye formed under aqueous conditions is extracted with isobutyl methyl ketone [IBMK]. The system obeys Beer's law over the range 0–3 g of nitrite at 545 nm and the colour is stable for 3h. The molar absorptivity of the colour system is 5.7 × 10⁴ L mol^–1 cm^–1. The relative standard deviation is 1.3% for ten determinations at 2 ug of nitrite. Nitrate is determined as nitrite after reduction on a cadmium column. Negative interferences from SO₂, H₂S, Cu²⁺ and Cr³⁺ and positive interference from Fe²⁺ and Fe³⁺ can be simply masked.     

Novel D-π-A system based on zinc-porphyrin derivatives for highly efficient dye-sensitised solar cells

We have designed and synthesised novel zinc porphyrin dyes that have a D-π-A system based on porphyrin derivatives containing a carbazole linked triphenylamine (TPA) electron-donating group as the second electron donor and a meso-substituted phenyl carboxyl anchoring group attached at the meso position of the porphyrin ring, yielding push-pull porphyrins as the most efficient green dye for DSSC applications. Under photovoltaic performance measurements, a maximum photon-to-electron conversion efficiency of 5.01% was achieved with the DSSC based on the dye HKK-Por1 (J_SC = 10.7 mA/cm², V_OC = 0.67 V, FF = 0.70) under AM1.5 irradiation (100 mW/cm²).