Highly controlled coating of biomimetic polydopamine in TiO2 nanotubes

Highly controlled coating of biomimetic polydopamine (PDA) was achieved on titanium dioxide nanotubes (TiO₂ NTs) by exposing TiO₂ NT arrays to a slightly alkaline dopamine solution. The thin films act as photonic sensitizers (enhancing photocurrents and photodegradation) in the visible light range. The PDA coatings can furthermore be used as a platform for decorating the TiO₂ NTs with different co-catalysts and metal nanoparticles (NPs).     

Ag@TiO2 Nanoprisms with Highly Efficient Near‐Infrared Photothermal Conversion for Melanoma Therapy

Melanoma is a primary reason of death from skin cancer and associated with high lethality. Photothermal therapy (PTT) has been developed into a powerful cancer treatment technique in recent years. Here, we created a low‐cost and high‐performance PTT agent, Ag@TiO₂ NPs, which possesses a high photothermal conversion efficiency of ≈65 % and strong near‐infrared (NIR) absorption about 808 nm. Ag NPs were synthesized using a two‐step method and coated with TiO₂ to obtain Ag@TiO₂ NPs by a facile sol‐gel method. Because of the oxide, Ag@TiO₂ NPs exhibit remarkable high photothermal conversion efficiencies and biocompatibility in vivo and in vitro. Cytotoxicity and therapeutic efficiency of photothermal cytotoxicity of Ag@TiO₂ NPs were tested in B16‐F10 cells and C57BL/6J mice. Under light irradiation, the elevated temperature causes cell death in Ag NPs‐treated (100 μg mL^?1) cells in vitro (both p<0.01). In the case of subcutaneous melanoma tumor model, Ag@TiO₂ NPs (100 μg mL^?1) were injected into the tumor and irradiated with a 808 nm laser of 2 W cm^?2 for 1 minute. As a consequence, the tumor volume gradually decreased by NIR laser irradiation with only a single treatment. The results demonstrate that Ag@TiO₂ NPs are biocompatible and an attractive photothermal agent for cutaneous melanoma by local delivery.     

Biocompatibility and <Emphasis Type="Italic">in vitro</Emphasis> antineoplastic drug-loaded trial of titania nanotubes prepared by anodic oxidation of a pure titanium

TiO₂ nanotube (NT) arrays have been prepared by anodic oxidation of a Ti sheet, and carbon-deposited TiO₂ NT arrays have been prepared by annealing TiO₂ NT arrays in carbon atmosphere. The biocompatibility of the as-prepared NT arrays was investigated by observing the growth of osteosarcoma (MG-63) cells on the NT arrays. The application of the TiO₂ NT arrays as a drug delivery vehicle was investigated. Both the TiO₂ NTs and the carbon-modified TiO₂ NTs have good biocompatibility supporting the normal growth and adhesion of MG-63 cells with no need of extracellular matrix protein coating. The one end-opened TiO₂ NTs can be easily filled with drugs, working as an efficient drug delivery vehicle.     

TiO2 nanotubes fabricated by electrochemical anodization in molten o-H3PO4-based electrolyte: Properties and applications

Self-organized TiO₂ nanotubes (NTs) can be formed by electrochemical anodization. Anodization is generally performed in aqueous or organic electrolytes containing halogen ions, such as Cl⁻ and F⁻. However, these electrolytes lead to less ordered structures or carbon remnants, thus suppressing the electrical properties and limiting the applications. To overcome these limitations, new anodization approaches were performed in carbon-free electrolyte-based electrolyte. In this review, we summarizes the short history of TiO₂ NTs, general mechanisms of growing NTs, properties, and applications of classic TiO₂ NTs. Then, a new-generation of anodization approach conducted in molten orhto-phosphoric acid is elucidated based on anodization parameters, concluding the optimized condition to form highly ordered TiO₂ NT arrays. Finally, the review addresses further modifications such as heat-treatment, noble metal deposition, thermal dewetting, and double anodization to enhance the optical and electrical properties for use in various applications.     

Multifunctional Uniform Core–Shell Fe3O4@mSiO2 Mesoporous Nanoparticles for Bimodal Imaging and Photothermal Therapy

Multimodal imaging and simultaneous therapy is highly desirable because it can provide complementary information from each imaging modality for accurate diagnosis and, at the same time, afford an imaging‐guided focused tumor therapy. In this study, indocyanine green (ICG), a near‐infrared (NIR) imaging agent and perfect NIR light absorber for laser‐mediated photothermal therapy, was successfully incorporated into superparamagnetic Fe₃O₄@mSiO₂ core–shell nanoparticles to combine the merit of NIR/magnetic resonance (MR) bimodal imaging properties with NIR photothermal therapy. The resultant nanoparticles were homogenously coated with poly(allylamine hydrochloride) (PAH) to make the surface of the composite nanoparticles positively charged, which would enhance cellular uptake driven by electrostatic interactions between the positive surface of the nanoparticles and the negative surface of the cancer cell. A high biocompatibility of the achieved nanoparticles was demonstrated by using a cell cytotoxicity assay. Moreover, confocal laser scanning microscopy (CLSM) observations indicated excellent NIR fluorescent imaging properties of the ICG‐loaded nanoparticles. The relatively high r₂ value (171.6 mM ^?1 s^?1) of the nanoparticles implies its excellent capability as a contrast agent for MRI. More importantly, the ICG‐loaded nanoparticles showed perfect NIR photothermal therapy properties, thus indicating their potential for simultaneous cancer diagnosis as highly effective NIR/MR bimodal imaging probes and for NIR photothermal therapy of cancerous cells.     

CdS‐Encapsulated TiO2 Nanotube Arrays Lidded with ZnO Nanorod Layers and Their Photoelectrocatalytic Applications

A novel TiO₂ nanotube array/CdS nanoparticle/ZnO nanorod (TiO₂ NT/CdS/ZnO NR) photocatalyst was constructed which exhibited a wide‐absorption (200–535 nm) response in the UV/Vis region and was applied for the photoelectrocatalytic (PEC) degradation of dye wastewater. This was achieved by chemically assembling CdS into the TiO₂ NTs and then constructing a ZnO NR layer on the TiO₂ NT/CdS surface. Scanning electron microscopy (SEM) results showed that a new structure had been obtained. The TiO₂ NTs looked like many “empty bottles” and the ZnO NR layer served as a big lid. Meanwhile the CdS NPs were encapsulated between them with good protection. After being sensitized by the CdS NPs, the absorption‐band edge of the obtained photocatalyst was obviously red‐shifted to the visible region, and the band gap was reduced from its original 3.20 eV to 2.32 eV. Photoelectric‐property tests indicated that the TiO₂ NT/CdS/ZnO NR material maintained a very high PEC activity in both the ultraviolet (UV) and the visible region. The maximum photoelectric conversion efficiencies of TiO₂ NT/CdS/ZnO NR were 31.8 and 5.98 % under UV light (365 nm) and visible light (420–800 nm), respectively. In the PEC oxidation, TiO₂ NT/CdS/ZnO NR exhibited a higher removal ability for methyl orange (MO) and a high stability. The kinetic constants were 1.77×10^?4 s^?1 under UV light, which was almost 5.9 and 2.6 times of those on pure TiO₂ NTs and TiO₂ NT/ZnO NR, and 2.5×10^?4 s^?1 under visible light, 2.4 times those on TiO₂ NT/CdS.     

Nickel Hydroxide Nanoparticle Activated Semi‐metallic TiO2 Nanotube Arrays for Non‐enzymatic Glucose Sensing

Semi‐metallic TiO₂ nanotube arrays (TiO_xC_y NTs) have been decorated uniformly with Ni(OH)₂ nanoparticles without the aid of a polymer binder. The resulting hybrid nanotube arrays exhibit excellent catalytic activity towards non‐enzymatic glucose electro‐oxidation. The anodic current density of the glucose oxidation is significantly improved compared with traditional TiO₂ nanotubes decorated with Ni(OH)₂. Moreover, the Ni(OH)₂/TiO_xC_y NT‐based electrode shows a fast response, high sensitivity, wide linear range, good selectivity and stability towards glucose electro‐oxidation, and thus provides a promising and cost‐effective sensing platform for non‐enzymatic glucose detection.     

Biomimetic Synthesis of Ag2Se Quantum Dots with Enhanced Photothermal Properties and as “Gatekeepers” to Cap Mesoporous Silica Nanoparticles for Chemo–Photothermal Therapy

Ag₂Se quantum dots (QDs) with near‐infrared (NIR) fluorescence have been widely utilized in NIR fluorescence imaging in vivo because of their narrow bulk band gap and excellent biocompatibility. However, most of synthesis methods for Ag₂Se QDs are expensive and the reactants are toxic. Herein, a new protein‐templated biomimetic synthesis approach is proposed for the preparation of Ag₂Se QDs by employing bovine serum albumin (BSA) as a template and dispersant. The BSA‐templated Ag₂Se QDs (Ag₂Se@BSA QDs) showed NIR fluorescence with high fluorescence quantum yield (≈21.2 %), excellent biocompatibility and good dispersibility in different media. Moreover, the obtained Ag₂Se@BSA QDs exhibited remarkable photothermal conversion (≈27.8 %), which could be used in photothermal therapy. As a model application in biomedicine, the Ag₂Se@BSA QDs were used as “gatekeepers” to cap mesoporous silica nanoparticles (MSNs) by means of electrostatic interaction. By taking the advantages of NIR fluorescence and photothermal property of Ag₂Se@BSA QDs, the obtained MSN‐DOX‐Ag₂Se nanoparticles (MDA NPs) were employed as a nanoplatform for combined chemo‐photothermal therapy. Compared with free DOX and MDA NPs without NIR laser, the laser‐treated MDA NPs exhibited lower cell viability in vitro, implying that Ag₂Se@BSA QDs are highly promising photothermal agents and the MDA NPs are potential carriers for chemo–photothermal therapy.     

Photocatalytic activities of C–N-doped TiO2 nanotube array/carbon nanorod composite

A C–N-doped TiO₂ nanotube (NT)/carbon nanorod composite is fabricated by chemical vapor deposition (CVD). Carbon nanorods are grown from the TiO₂ NTs, and partly graphitized, while TiO₂ is in the mixture of anatase and rutile. The C–N doping shifts the absorption edge of TiO₂ NTs to the visible light region; the formed carbon nanorods promote the charge carrier transfer from the TiO₂ surface to the electrolyte. Under the simulated solar light irradiation, the C–N-doped TiO₂ NTs show higher photocatalytic activity in the degradation of methyl orange (MO) than the undoped TiO₂ NTs.     

Synthesis,characterization of B-doped TiO<Subscript>2</Subscript> nanotubes with high photocatalytic activity

B-doped TiO₂ nanotubes (B/TiO₂ NTs) were prepared by the combination of sol–gel process with hydrothermal treatment. The prepared catalysts were characterized by XRD, TEM and XPS. The photocatalytic activity of B/TiO₂ NTs was evaluated through the photodegradation of aqueous methyl orange. The results demonstrated that the 1.5% B/TiO₂ NTs calcined at 300 °C possessed the best photocatalytic activity. Compared with pure TiO₂ nanotubes, the doping with B significantly enhanced the photocatalytic efficiency.     

Synthesis of metal-doped tio2 nanotubes and their catalytic performance for low-temperature co oxidation

Summary Gold-, gold and copper-doped TiO₂ nanotubes (Au/TiO₂ NTs, Au-Cu/TiO₂ NTs) are prepared by impregnation-reduction method. The doped nanotubes are characterized by powder X-ray diffraction (XRD) and transmission electron microscopy (TEM). Their catalytic performance for CO oxidation is also examined     

In Situ ATR-FTIR and UV-Visible Spectroscopy Study of Photocatalytic Oxidation of Ethanol over TiO2 Nanotubes

The photocatalytic oxidation of ethanol over TiO₂ nanotubes (NTs) was investigated by in situ attenuated total reflection using Fourier transform infrared spectroscopy (ATR-FTIR) and ultraviolet (UV)-visible spectroscopy. In the ATR-FTIR study, the TiO₂ NTs were spread in a ZnSe crystal trough that was used as the reactor. The evolution of the reaction under UV irradiation was investigated by in situ monitoring of changes in the species at the surface of the TiO₂ NTs. Ethanol adsorbed on the TiO₂ NTs surface, forming alkoxide and hydroxide groups, which were then attacked by ^?OH, with the formation of a vinyl alcohol intermediate that was finally transformed to acetic acid. In addition, the species changes in the reaction solution were also investigated by in situ UV-visible spectroscopy using a small volume flow-through cell. The UV-visible data further confirmed the oxidation mechanism of ethanol on TiO₂ NTs elucidated by ATR-FTIR data.     

Direct Electrochemistry of Hemoglobin on Vertically Aligned Carbon Hybrid TiO2 Nanotubes and Its Highly Sensitive Biosensor Performance

The present work is focused on developing a novel biomaterial platform to achieve enhanced direct electron transfer (DET) of hemoprotein and higher biosensor performance on vertically aligned carbon hybrid TiO₂ nanotubes (C‐TiO₂ NTs). Using a simple surfactant‐assisted method, controllable hybridization of TiO₂ NTs with conductive amorphous carbon species is realized. The obtained C‐TiO₂ NTs is ingeniously chosen to serve as an ideal "vessel" for protein immobilization and biosensor applications. Results show that the appropriate hybridization of C into TiO₂ NTs leads to a much better conductivity of TiO₂ NTs without destroying their preponderant tubular structures or damaging their excellent biocompatibility and hydrophilicity. When used in loading proteins, the C‐TiO₂ NTs can be used as a super vessel for rapid and substantive immobilization of hemoglobin (Hb), with a large surface electroactive Hb coverage ( Γ ??) of 3.3×10^?9 mol·cm^?2. Enhanced DET of Hb is commendably observed on the constructed Hb/C‐TiO₂ NTs biosensor with a couple of well‐defined redox peaks in a fast electron transfer process. The biosensor further exhibits fast response, high sensitivity and stability for the amperometric biosensing of H₂O₂ with the detection limit as low as 3.1×10^?8 mol/L.     

The Preparation and Characterization of La Doped TiO2 Nanotubes and Their Photocatalytic Activity

La-doped TiO₂ nanotubes (La/TiO₂ NTs) were prepared by the combination of sol-gel process with hydrothermal treatment. The prepared samples were characterized by using transmission electron microscopy, x-ray diffraction, x-ray photoelectron spectra, and ultraviolet-visible spectra. The photocatalytic performance of La/TiO₂ NTs was studied by testing the degradation rate of methyl orange under ultraviolet (UV) irradiation. The results indicated La/TiO₂ NTs calcined at 300°C consisted of anatase as the unique phase. The absorption spectra of the La/TiO₂ NTs showed a stronger absorption in the UV range and a slight red shift in the band gap transition than that of pure TiO₂ nanotubes. The photocatalytic performance of TiO₂ NTs could be improved by the doping of lanthanum ions, which is ascribed to several beneficial effects the formation of Ti-O-La bond and charge imbalance, existing of oxygen defects and Ti³⁺ species, stronger absorption in the UV range and a slight red shift in the band gap transition, as well as higher equilibrium dark adsorption of methyl orange. 0.75 wt% La/TiO₂ NTs had the best catalytic activity.     

Enhanced Visible‐Light‐Induced Photoelectrocatalytic Degradation of Methyl Orange by CdS Sensitized TiO2 Nanotube Arrays Electrode

In this work, CdS sensitized TiO₂ nanotube arrays (CdS/TiO₂NTs) electrode was synthesized with the CdS deposition on the highly ordered titanium dioxide nanotube arrays (TiO₂NTs) by sequential chemical bath deposition method (S‐CBD). The as‐prepared CdS/TiO₂NTs was characterized by field‐emission scanning electron microscopy (FE‐SEM) and X‐ray diffraction (XRD). The results indicated that the CdS nanoparticles were effectively deposited on the surface of TiO₂NTs. The amperometric I‐t curve on the CdS/TiO₂NTs electrode was also presented. It was found that the photocurrent density was enhanced significantly from 0.5 to 1.85 mA/cm² upon illumination with applied potential of 0.5 V at the central wavelength of 253.7 nm. The photoelectrocatalytic (PEC) activity of the CdS/TiO₂NTs electrode was investigated by degradation of methyl orange (MO) in aqueous solution. Compared with TiO₂NTs electrode, the degradation efficiencies of CdS/TiO₂NTs electrode increased from 78% to 99.2% under UV light in 2 h, and from 14% to 99.2% under visible light in 3 h, which was caused by effective separation of the electrons and holes due to the effect of CdS, hence inhibiting the recombination of electron/hole pairs of TiO₂NTs.     

Controllable incorporation of CdS nanoparticles into TiO<Subscript>2</Subscript> nanotubes for highly enhancing the photocatalytic response to visible light

A constant current electrochemical deposition was employed to incorporate CdS nanoparticles into the TiO₂ nanotube arrays (TiO₂NTs). The size and amount of CdS nanoparticles in TiO₂NTs (CdS@TiO₂NTs) were controllable via modulating current, deposition time and electrolyte concentration. It was revealed, from the scanning electron microscopy (SEM) images and X-ray photoelectron spectroscopy (XPS) in depth profile, that CdS nanoparticles were filled into TiO₂ nanotubes. A shift of the absorption edge toward the visible region under the optimal electrodeposition condition was observed with the diffuse reflectance spectroscopy (DRS). A 5-fold enhancement in the photocurrent spectrum for TiO₂NTs was observed and the photocurrent response range was significantly extended into the visible region because of the CdS incorporation. Compared with pure TiO₂NTs, under a visible light irradiation, CdS@TiO₂NTs exhibited a 3.5-fold improvement of photocatalytic activity, which was demonstrated by the photocatalytic decomposition of Rhodamine B (RhB).     

Enhancement of ethanol electrooxidation on plasmonic Au/TiO2 nanotube arrays

Novel electrocatalysts Au/TiO₂ nanotube arrays (Au/TiO₂NTs) were prepared by loading low-content(1.9 at.%) of Au nanoparticles (AuNPs) onto highly ordered TiO₂ nanotube arrays (TiO₂NTs). Ethanol electrooxidation indicates that visible-light (λ > 400 nm) irradiation can significantly enhance the activity as well as resistpoisoning of Au/TiO₂NTs electrocatalysts that are activated by plasmon resonance. Au/TiO₂NTs catalysts calcinated at 300 °C display the highest performance due to the strong synergistic interactions between TiO₂ and Au NPs. The combination of visible-light irradiation with a controllable potential offers a new strategyfor enhancing the performance of anodes in direct ethanol fuel cell (DEFC).     

Influences of the H2PtCl6 Solution's pH on the Photocatalytic Activities of Platinum-Loaded TiO2 Nanotubes

By using H₂PtCl₆ and titanate nanotubes as precursor, platinum-loaded TiO₂ nanotubes (Pt/TiO₂NTs) are prepared at different pH by deposition-precipitation method. The prepared materials are characterized with powder x-ray diffraction (XRD) and x-ray photoelectron spectra (XPS). Their photocatalytic performance is evaluated by the degradation rates of methyl orange solution under UV-vis light irradiation. Obtained results indicate that the pH of H₂PtCl₆ solution has obvious influence on the catalytic performance of Pt/TiO₂NTs.     

RuO2-doping into high-aspect-ratio anodic TiO2 nanotubes by electrochemical potential shock for water oxidation

A novel method for homogenous incorporation of Ru (RuO₂, or RuO₃) into high aspect ratio anodic TiO₂ NTs was studied. TiO₂ NTs were prepared by anodization in HF based electrolyte, after which very short high applied potential, referred to as potential shock, was imposed on the TiO₂ NTs in KRuO₄ electrolyte. The high potential shock induced massive flow of RuO₄⁻ to positively-biased TiO2 NTs, resulting in the incorporation of Ru as a form of Ru, RuO₂, and RuO₃ in the TiO₂ NTs. Optimal potential shock, which allowed the most suitable amount and incorporation state of Ru catalysts in TiO₂ NTs, was determined by SEM, TEM, EDS, XPS, and LSV. It was demonstrated that electrochemical potential shock (simply imposed on the anodic TiO₂ for a few seconds in the electrolyte of KRuO₄) resulted in homogenous incorporation of Ru into the whole nanotubes without the need for any complicated steps or facilities.     

Fabrication of Ag Nanoparticles Embedded in TiO2 Nanotubes: Using Electrospun Nanofibers for Controlling Plasmonic Effects

Composites of electrospun poly(ethylene oxide) (PEO) fibers and silver nanoparticles (Ag NPs) were used as a soft template for coating with TiO₂ by atomic layer deposition (ALD). Whereas the as‐deposited TiO₂ layers on PEO fibers and Ag NPs were completely amorphous, the TiO₂ layers were transformed into polycrystalline TiO₂ nanotubes (NTs) with embedded Ag NPs after calcination. Their plasmonic effect can be controlled by varying the thickness of the dielectric Al₂O₃ spacer between Ag NPs and dye molecules by means of the ALD process. Electronic and spectroscopic analyses demonstrated enhanced photocurrent generation and solar‐cell performance due to the intense electromagnetic field of the dye resulting from the surface plasmon effect of the Ag NPs.