Liquid-crystalline monomers, dimers and side group polymers containing phenylpyrimidine mesogens

Phenylpyrimidine derivatives were used to synthesize monomers, dimers and side group polymers. Only a few monomers and dimers show liquid-crystalline behaviour whereas almost all of the polysiloxanes, polyacrylates and polymetha-crylates prepared possess enantiotropic Hquid-crystalline phases. The structure of the main chain and of the mesogenic unit as well as the length of the spacer and of the terminal groups were modified. The relation between structure and phase behaviour is discussed.     

Liquid-crystalline side chain polymers containing a chiral spacer unit exhibiting chiral smectic phases

The synthesis and mesomorphic properties of two liquid-crystalline side chain polymers with a chiral centre in the α or β position of the α-hydroxy acid representing the spacer unit are described. The chiral α branching leads to a dramatic decrease in the transition temperatures and a strong narrowing of the smectic mesophase (compared with the unbranched model compound I). The chiral β branching results in a chiral smectic phase, a pronounced contraction of the S_c phase, and the loss of the higher ordered S_f phase. The S*_c phase was confirmed by X-ray investigations of oriented samples. Depending on the polymerization conditions samples were obtained which were oriented in melt drawn fibres either with their smectic layers or their mesogenic units in the direction of stress.     

Synthesis,structure, and properties of chiral liquid crystal monomers and polymers based on menthol

To study structure–mesomorphism relationships of the monomers and polymers based on menthol, four new chiral monomers ( M₁ – M₄ ) and the corresponding homopolymers ( P₁ – P₄ ) with menthyl group were synthesized. Their chemical structures, formula, phase behavior, and thermal stability were characterized by FTIR, ¹H NMR, ¹³C NMR, elemental analyses, differential scanning calorimetry, polarizing optical microscopy, X‐ray diffraction, and thermogravimetric analysis. The selective reflection of light was investigated with ultraviolet/visible spectrometer. The influence of the mesogenic core rigidity, spacer length, and menthyl steric effect on the mesomorphism of M₁ – M₄ and P₁ – P₄ was examined. By inserting a flexible spacer between the mesogenic core and the terminal menthyl groups, four target monomers and polymers could form the expected mesophase. Moreover, their melting temperature (T_m), glass transition temperature (T_g), clearing temperature (T_i), and mesophase range (ΔT) increased with increasing the mesogenic core rigidity; whereas the T_m and T_g decreased, T_i and ΔT increased with an increase of the spacer length. M₁ and M₂ showed monotropic and enantiotropic cholesteric phase, respectively, whereas M₃ and M₄ all revealed chiral smectic C (SmC*), cholesteric and cubic blue phases. In addition, with increasing temperature, the selective reflection of light shifted to the long wavelength region at the SmC* phase range and to the short wavelength region at the cholesteric range, respectively. P₁ and P₂ only showed a smectic A (SmA) phase, whereas P₃ and P₄ exhibited the SmC* and SmA phases. All the obtained polymers had very good thermal stability. © 2012 Wiley Periodicals, Inc. J. Polym. Sci. Part A: Polym Chem, 2012     

Preparation and properties of some water-soluble,comb-shaped,amphiphilic polymers

Water-soluble comb-shaped polymers were prepared through grafting of poly(ethylene glycol) monomethyl ethers (MPEG) onto acrylic and methacrylic ester copolymers by transesterification reactions. The grafting was alkali-catalyzed, and performed in refluxing toluene solution or in melt at 155°C. The grafting efficiency was found to be on the order of 1 graft/10 monomer units. Epoxy groups in glycidyl methacrylate copolymers were also utilized for grafting. The crude graft copolymers were purified through chromatography and characterized by NMR and IR spectroscopy. Polymers prepared from MPEG 2000 were crystalline with melting points 10–15°C lower than the MPEG used. All polymers were shown to be surface active with CMC on the order of 1.5 g/L, and surface tensions of 38–45 dyn/cm. When used as emulsifiers the graft copolymers containing bulky lipophilic ester groups (2-ethylhexyl t-butyl) gave oil-in-water (o/w) and water-in-oil (w/o) emulsions from xylene/water with higher stability than those containing straight chain ester groups (methyl nbutyl n-docecyl). The most stable emulsions were obtained by dissolving the polymers in the organic phase.     

Bis(fluoroalkyl)acrylic and methacrylic phosphate monomers, their polymers and some of their properties

Ten fluoromonomers of structure (R_FO)₂P(O)OCH₂CH₂OC(O)CRCH₂ were made in 30-64% yield by treating the chloridates (R_FO)₂P(O)Cl with HOCH₂CH₂OC(O)CRCH₂ in chloroform in the presence of triethylamine [R_F=CF₃CH₂, C₂F₅CH₂, C₃F₇CH₂, C₄F₉CH₂, C₄F₉CH₂CH₂ or C₆F₁₃CH₂CH₂; R  H or Me]. The chloromonomer (CCl₃CH₂O)₂P(O)OCH₂CH₂OC(O)CHCH₂ was obtained analogously in 29% yield. Polymerisation of the acrylate monomers, but not the methacrylate monomers, could be effected using α-azoisobutyronitrile as a radical initiator. Acrylic polymers having CF₃CH₂O, CCl₃CH₂O and C₆F₁₃CH₂CH₂O side-chains were obtained as translucent rubbers. Specimens of cotton fabric were treated with solutions of the polymers, and average water and oil repellency ratings measured. Fabric coated with the polymer with the C₆F₁₃CH₂CH₂O side-chain afforded protection from penetration of the test liquids. Treated fabrics were subjected to the limiting oxygen index (LOI) test according to BS EN ISO 4589-2 (1999): this test determines the point at which a material just burns in a volumetric flow of oxygen and nitrogen. The treated fabrics were more fire-resistant (LOI 22-29%) than the untreated fabric (LOI 18%). Fabric coated with the CCl₃CH₂O-based polymer can be considered fire-retardant (LOI 29%). The fluoromonomers were tested for anti-acetylcholinesterase activity and were found to be poor enzyme inhibitors; they are predicted to possess low acute toxicity.     

Synthesis,structure, and properties of bifunctional azobenzene monomers and polymers on their basis

A new preparative procedure for the synthesis of new bifunctional azo monomers with different ratios of methacryloyl and hydroxyl groups has been developed. The monomers thus prepared contain a nonlinear optical 4′-amino-4-nitroazobenzene group and can be involved in polymerization, polycondensation, and polymer-analogous transformation reactions to afford linear and network polymers. The free-radical copolymerization of 4′-[N-methyl-N-(3-methacryloyloxy-2-hydroxypropyl)]amino-4-nitroazobenzene with methyl methacrylate has been studied with the aim of preparing azobenzene [1+0] prepolymers with pendant chromophore groups, and the reactivity ratios and reactivity factors of the comonomers have been calculated. The hydroxyl-containing copolymers are characterized by rather high molecular mass, satisfactory heat resistance and thermal stability, and good film-forming behavior. These copolymers may be crosslinked with the use of diisocyanates and thus may form thin optically homogeneous red films.     

Study on new chiral liquid crystalline monomers and polymers containing menthyl groups

A series of new chiral monomers (M1–M4) and the corresponding siloxane polymers (P1–P4) containing menthyl groups were synthesised to establish the relationship between their structure and liquid crystalline properties. The effect of the mesogenic core rigidity and the spacer length on the phase behaviour of the monomers and polymers obtained in this study was discussed. The selective reflection of light for the chiral monomers was studied with UV-Vis spectrometer. Polarising optical microscopy, differential scanning calorimetry, X-ray diffraction and thermogravimetric analysis were used to characterise the phase behaviour and thermal stabilities. It was found that these chiral monomers and polymers were beneficial for the formation of the mesophases when a flexible spacer was inserted between the mesogenic core and terminal menthyl groups. M1–M3 showed enantiotropic chiral smectic C phase and cholesteric phase, and monotropic cubic blue phase on cooling cycle. M4 only showed cholesteric phase. P1–P4 showed a smectic A phase. With increasing the mesogenic core rigidity or decreasing the spacer length, the corresponding melting temperatures, glass transition temperatures and isotropic temperatures all increased.     

Photoregulation of the optical properties of comb-shaped polymers with mesogenic side groups

A new approach for photoregulation of supramolecular structure and optical properties of polyacrylic copolymers bearing azobenzene and cyanobiphenyl mesogenic groups is presented. The detailed study of photooptical behaviour, kinetics of photoinduced optical birefringence and mechanism of structural transformations taking place during a laser illumination are discussed.     

Vinyl monomers bearing chromophore moieties and their polymers. III. Synthesis and photochemical behavior of acrylic monomers having phenothiazine moieties and their polymers

Four acrylic monomers bearing phenothiazine moieties, i.e., N-acrylyl-phenothiazine (APT), N-acrylyl-2-chlorophenothiazine (ACPT), N-acrylyl-2-acetylphenothiazine (AAPT), and 10-acrylyl-1-azaphenothiazine (AAzPT) were synthesized by dehydrohalogenation of the corresponding N-(β-chloropropionyl)-substituted phenothiazine derivatives with 1,8-diazabicyclo[5.4.0]undec-5-ene (DBU). These monomers could easily be polymerized by initiation with AIBN. The emission fluorescence spectra of the monomers and their polymers were recorded, which showed that the polymers displayed much stronger fluorescence than their corresponding monomers at the same chromophore concentrations. This phenomenon, as termed as “structural self-quenching effect,” was commonly observed for acrylic monomers bearing chromophore moieties and ascribed to the coexistence of the electron-donating chromophore and the electron-accepting double bond in the same molecule. Because of the formation of exciplex, the monomer APT, as well as ACPT, AAPT, AAzPT, and their polymers, could initiate the photopolymerization of AN. The charge transfer phenomenon between P(APT), P(ACPT), and C₆₀ was also explored. © 1996 John Wiley & Sons, Inc.     

Synthesis of adamantane monomers and their properties

Conclusion Syntheses were reported for new adamantane monomers, namely the allyl and propargyl esters of 1-adamantanecarboxylic acid, the diallyl and dipropargyl esters of 1,3-adamantanedicarboxylic acid and di-1-adamantyl maleate. These esters are capable of undergoing thermal copolymerization with -cyanoacrylate esters.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 12, pp. 2808–2809, December, 1986.     

Rheological behavior of comb-shaped mesophase polymers and their modifying role in the blends with thermoplastics

Most of the polymers with mesogenic groups in side- or main-chains are liquid-crystalline in nature. One can observe a lot of similarities in the mesophase structure types, orientational order parameter, anisotropy of optical, electrical and magnetical properties of polymer and low-molecular-weight liquid crystals. At the same time the presence of backbones contributes some peculiarities and limitations to their behavior.     

Vinyl monomers bearing chromophore moieties and their polymers. XI. Synthesis and photochemical behavior of carbazole‐containing methacrylic monomers and their polymers

Three carbazole‐containing methacrylic monomers, 2‐(N‐carbazolyl)ethyl methacrylate(CzEMA), 6‐(N‐carbazolyl)hexyl methacrylate(CzHMA), and 11‐(N‐carbazolyl)undecyl methacrylate (CzUMA), and their saturated model compounds, 2‐(N‐carbazolyl)ethyl isobutyrate, 6‐(N‐carbazolyl)hexyl isobutyrate, and 11‐(N‐carbazolyl)undecyl isobutyrate, were synthesized and polymerized. UV absorption spectra showed that there was either negligible or no interaction between the carbon–carbon double bond of the methacrylic group and the carbazolyl chromophore moiety in the ground state for these monomers. Fluorescence spectra of the monomers, their model compounds, and the polymers were recorded in the solvents with different polarities. CzEMA exhibited the fluorescence structural self‐quenching effect (SSQE), but CzHMA and CzUMA did not. In addition, the SSQE of CzEMA depended strongly on the polarity of the solvents. That is, the stronger the polarity of a solvent was, the more obvious the SSQE was. Therefore, the SSQE of CzEMA mainly was caused by the intramolecular charge‐transfer interaction between the excited electron‐donating carbazolyl chromophore moiety and the electron‐accepting carbon–carbon double bond of the methacrylic group. This was confirmed by the fluorescence‐decay curves and the fluorescence lifetimes of the monomers, their model compounds, and the polymers. The monomers, their model compounds, and the polymers initiated the photopolymerization of methyl methacrylate (MMA) upon UV irradiation. CzEMA showed greater initiation ability than the other two monomers and their model compounds; this was ascribed to the photoinduced intramolecular charge‐transfer interaction. The higher initiation efficiency of the homopolymers compared to that of the copolymers with MMA was interpreted as the result of singlet energy migration of the excited carbazolyl chromophores along the polymer chains. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 679–688, 2000     

Doubly dendronized chiral polymers showing thermoresponsive properties

The dendronization of linear polymers by dendrons with different cores and peripheries provides a convenient strategy to fuse distinct properties in one matter. By combining thermoresponsive properties with chirality, a series of doubly dendronized polymers possessing interior chiral proline units and peripheral oligoethylene glycol (OEG)‐based dendrons are synthesized and characterized. The chirality of proline moieties are varied to check potential effects on thermoresponsiveness and chiroptical properties, and the terminal groups in the OEG periphery are changed to tune the hydrophilicity of the resulting polymers. The macromonomer route is applied to obtain polymers with well‐defined structures. Free radical polymerization in bulk results in polymers with surprisingly high molar masses. Their thermally induced phase transition processes are monitored by UV–vis spectroscopy, and chiroptical properties are monitored by optical rotation measurements and circular dichroism spectroscopy. These doubly dendronized polymers show characteristic thermoresponsive behavior, and their phase transition temperatures are dominated by the peripheral structures. Polymerization accompanies weak chiral amplification, but the chirality of the proline interior contributes significantly to the thermal stability of chiroptical properties of the resulting polymers. In vitro cytotoxicity measurements are carried out to check the biocompatibility of these thermoresponsive polymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5143–5152     

Chromatic changes in the blends of electroactive polymers with comb-shaped flexible polymers

The effect of blending of alkylated polymers, which have different backbone structures, was investigated in order to improve the electronic properties of conducting polymers. Comb-shaped flexible polymer, poly(octadecyl acrylate) (PODA), was blended with rigid alkylated conducting polymers, poly(3-dodecyl-thiophene)(PDDT), and polyaniline emeraldine base (PANI)/p-dodecyl-benzenesulfonic acid (DBSA) complex, respectively, to investigate the effect of long alkyl chain of flexible polymer on the conformational mode change of rigid backbones and the effect of intermolecular interaction between these alkylated polymers. Optical microscopy was applied to observe the morphology change and obtain the phase diagrams of these blends. The intermolecular interactions that occurred in these blends were explained for each different characteristic peak obtained with FT-IR spectra. Solvatochromism (red-shift) of PDDT/PODA binary blends in solid state due to the planarity change of rigid backbone in the presence of PODA and electrochromism of PANI(DBSA)₄/PODA ternary blends due to the hydrogen bonding between the nitrogen cation of PANI complex and carbonyl group of PODA are observed in UV-Vis-NIR spectra. Interestingly, the increase of conductivity was observed in the presence of 5 wt% of PODA in PDDT/PODA binary blends and a homogeneous smectic liquid crystalline structure was clearly confirmed by cross polarized optical microscopy in PANI(DBSA)₄/PODA ternary blends.     

梳形抗盐聚合物在聚合物驱油中的应用

三次采油技术已成为我国提高原油采收率的主要措施之一。研制新型高效驱油用聚合物是降低成本,提高采油量的关键。目前国内外研制的新型高效驱油用聚合物主要为两性聚合物、耐温耐盐单体共聚物、疏水缔合聚合物、复合(或多元组合)型聚合物、共混聚合物和梳形聚合物等。     

Liquid-crystalline polymers from cationic dendronized polymer-anionic lipid complexes

The use of cationic dendronized polymers as a polyelectrolytic system for templating thermotropic liquid-crystalline phases (LC) via complexation and self-assembly with counter-charged ionic lipids is described. The topology of the LC phases resulting from the self-assembly process, their lattice parameter, and the interpenetration of lipid chains is discussed via birefringency analysis and small-angle X-ray scattering. Depending on the generation of the dendronized polymer and the length of the alkyl chains, amorphous, lamellar, and columnar tetragonal phases are observed. A structural model is proposed which accounts for the systematic variations of alkyl chain length as well as polymer generation. Owing to the reversible nature of the ionic complexation, this process proves high relevance for nanoporous channels, biomimetic, transport, and nanotemplating applications.     

TNT-Based condensation monomers and polymers

New aromatic diamines were obtained on the basis of available and inexpensive 2, 4, 6-trinitrotoluene (trotyl, TNT). Monomers obtained were used for the preparation of the new organo-soluble polyimides containing thiophenoxy and phenoxy side groups.     

New carbazole-containing monomers and polymers

Five novel vinyl monomers, all of which contain 3-substituted carbazolyl groups [i.e., N-(9-ethyl-3-carbazolyl)-maleimide, 9-ethyl-3-carbazolyl acrylamide, 9-ethyl-3-carbazolyl methacrylamide, 9-ethyl-3-hydroxymethylcarbazolyl acrylate, and 9-ethyl-3-hydroxymethylcarbazolyl methacrylate], and their corresponding polymers were synthesized. Two methods were used for the synthesis of the last two monomers.     

Liquid-crystalline supramolecular polymers formed through complementary nucleobase-pair interactions

We report how the placement of nucleobase units, thymine, or N6-(4-methoxybenzoyl)adenine, onto the ends of a mesogenic core, bis-4-alkoxy-substituted bis(phenylethynyl)benzene, affects the properties of these materials. We show that addition of these bulky polar groups significantly reduces the range of liquid-crystalline behavior of these compounds. However, mixing two complementary nucleobase-containing AA- and BB-type monomer units together does result in the formation of stable, thermotropic liquid-crystalline (LC) phases. Hydrogen bonding is shown to play an important role in the formation of these LC phases, consistent with the formation of oligomeric or polymeric hydrogen-bonded aggregates. X-ray analyses of these mixed materials are consistent with the formation of smectic C phases.     

Liquid-crystalline polymers: Past, present, and future

The main steps of the evolution in studies related to the design and investigation of the structure and properties of thermotropic LC polymers containing mesogenic groups are discussed. The principal attention is focused on the results of experiments performed at the Laboratory of Chemical Transformations of Polymers, Faculty of Chemistry, Moscow State University, which was established and guided by Academician N.A. Platé from 1966 to 1985 and then supervised by V.P. Shibaev, the author of this review. Historical evidence is presented to demonstrate the contribution of Russian scientists to the development of approaches to the synthesis and study of chiral and electro- and photocontrollable comb-shaped LC polymers and related composites. The concept of preparing multifunctional LC copolymers and LC networks containing mesogenic, chiral, photochromic, and functional (including ionophoric) groups that can undergo hydrogen bonding, form complexes with metal ions, and interact with nanoparticles is scrutinized. Specific features of the structural organization of polymer mesophases are covered. The data on multifunctional comb-shaped LC polymers, LC ionomers, and LC dendrimers are examined, and the problems concerning the design of light-controllable LC copolymers and polymer photochromic composites and networks are reviewed. Some applied aspects of using LC polymers are considered: specifically, approaches to creation of lasers based on cholesterics and photo- and electroactive media in optics and photonics, systems for data recording and storage, holography, display technology, and other fields.