Application of a simple high-performance liquid chromatographic method for the determination of melphalan in the presence of its hydrolysis products

A procedure for the separation and quantitation of melphalan (L-PAM) and its hydrolysis products by high-performance liquid chromatography is described. The hydrolysis of L-PAM at 25 +/- 0.1 degrees and 41 +/- 0.1 degrees was studied between pH 3.0 and 9.0. The pattern of hydrolysis suggested that L-PAM decomposes via two consecutive pseudo first-order reactions. Pseudo first-order rate constants (k1) were determined for the disappearance of L-PAM at various pH values in buffered solutions and in a formulated product. At both temperatures L-PAM solutions were found to be most stable at low pH. Chloride ion was found to reduce the rate of hydrolysis.     

Analysis of 1- and 3-methylhistidines, aromatic and basic amino acids in rat and human urine

A procedure based on automated amino acid analysis has been developed to simultaneously quantify 1-methylhistidine (1-MH), 3-methylhistidine (3-MH), tyrosine, phenylalanine, tryptophan, lysine, histidine and arginine levels in human and rat urines. Deproteinized urine samples containing amino acids in the range 1-10 nmol were analyzed using single-column methodology with ninhydrin detection. Standard curves produced correlation coefficients greater than or equal to 0.99 with duplicate analyses agreeing to within +/- 1.9%. Quantitative recovery was ensured by using L-alpha-amino-beta-guanidinopropionic acid as an internal standard. Elution was accomplished in less than 90 min at pH 5.7 with sodium citrate buffers at 45 degrees C and 65 degrees C. Since 3-MH in the rat is acetylated at the alpha-amino group, rat, but not human, urine ultrafiltrates required acid hydrolysis prior to analysis. The utility of the technique of analysis of 1-MH and 3-MH in human urine was demonstrated for an adult male on a meat-free diet for 21 days; urinary excretion rates for 3-MH and 1-MH were determined to be 3.06 +/- 0.10 and 0.72 +/- 0.07 mumol/kg body mass/day, respectively. The technique was also used to measure the effect of disuse atrophy of rat skeletal muscle which induced a 40-60% increase in 3-MH. The procedure is also highly suited for measurement of urinary aromatic and/or basic amino acids.     

Determination of rate constants and activation energy of 3-chloro-1,2-propanediol hydrolysis by capillary electrophoresis with electrochemical detection

A method based on capillary electrophoresis with electrochemical detection (CE-ED) to calculate the rate constants and activation energy of 3-chloro-1,2-propanediol (3-MCPD) hydrolysis was described. Effects of several factors, such as the pH value and the concentration of the running buffer, separation voltage, injection time and the potential applied to the working electrode, were investigated to find the optimum conditions. With a 50 cm length of 25 microm diameter fused-silica capillary at a separation of 10 kV, well-defined separation of 3-chloro-1,2-propanediol from glycerol was achieved in 30 mmol/l borax (pH 9.24) within 13 min. Operated in a wall-jet configuration, a 328 microm copper-disk electrode used as the working electrode exhibits good response at 0.65 V (versus SCE) for 3-MCPD and glycerol. The rate constants of 3-MCPD hydrolysis at different temperatures were determined by monitoring the concentration changes of 3-MCPD. At 80, 85 and 90 degrees C, the measured rate constants of 3-MCPD hydrolysis were 3.8 x 10(-3) min(-1), 7.1 x 10(-3) min(-1) and 11.5 x 10(-3) min(-1), respectively. The activation energy for 3-MCPD hydrolysis was calculated to be 118.1 kJ/mol, which is in good agreement with the value in the literature.     

Formal total synthesis of (+/-)-gamma-lycorane and (+/-)-1-deoxylycorine using the [4+2]-cycloaddition/rearrangement cascade of furanyl carbamates

The total syntheses of gamma-lycorane and (+/-)-1-deoxylycorine were accomplished using an intramolecular Diels-Alder cycloaddition of a furanyl carbamate as the key step. The initially formed [4+2]-cycloadduct undergoes nitrogen-assisted ring opening followed by deprotonation/reprotonation of the resulting zwitterion to give a rearranged hexahydroindolinone. The stereochemical outcome of the IMDAF cycloaddition has the side arm of the tethered alkenyl group oriented syn with respect to the oxygen bridge. The key intermediate used in both syntheses corresponds to hexahydroindolinone 20. Removal of the t-Boc group in 20 followed by reaction with 6-iodobenzo[1,3]dioxole-5-carbonyl chloride afforded enamide 22. Treatment of this compound with Pd(OAc)(2) employing the Jeffrey modification of the Heck reaction provided the galanthan tetracycle 24 in good yield. Compound 24 was subsequently converted into (+/-)-gamma-lycorane using a four-step procedure to establish the cis-B,C-ring junction. A radical-based cyclization of the related enamide 33 was used for the synthesis of 1-deoxylycorine. Heating a benzene solution of 33 with AIBN and n-Bu(3)SnH at reflux gave the tetracyclic compound 38 possessing the requisite trans fusion between rings B and C in good yield. After hydrolysis and oxidation of 38 to 40, an oxidative decarboxylation reaction was used to provide the C(2)(-)C(3)(-)C(12) allylic alcohol unit characteristic of the lycorine alkaloids. The resulting enone was eventually transformed into (+/-)-1-deoxylycorine via known synthetic intermediates.     

Suggested Improvement in the Ing-Manske Procedure and Gabriel Synthesis of Primary Amines: Kinetic Study on Alkaline Hydrolysis of N-Phthaloylglycine and Acid Hydrolysis of N-(o-Carboxybenzoyl)glycine in Aqueous Organic Solvents

A slight modification of the Gabriel synthesis of primary amines is suggested on the basis of the observed and reported values of rate constants for the alkaline and acid hydrolyses of phthalimide, phthalamic acid, benzamide, and their N-substituted derivatives. The suggested procedure requires shorter reactions time and milder acid-base reaction conditions compared with the conventional acid-base hydrolysis in the Gabriel synthesis. A slight modification in the Ing-Manske procedure is also suggested. Pseudo-first-order rate constants, k(obs), for hydrolysis of N-phthaloylglycine, NPG, decrease from 24.1 x 10(-3) to 7.72 x 10(-3) and 6.12 x 10(-3) s(-1) with increasing acetonitrile and 1,4-dioxan contents, respectively, from 2 to 50% v/v (all the percentages given in the paper are vol %), while increasing the organic cosolvents content from 50 to 80% increases k(obs) from 7.72 x 10(-3) to 19.7 x 10(-3) s(-1) for acetonitrile and from 6.12 x 10(-3) to 52.8 x 10(-3) s(-1) for 1,4-dioxan, in aqueous organic solvents containing 0.004 M NaOH at 35 degrees C. The rate constants for NPG hydrolysis decrease from 2.11 x 10(-2) to 1.19 x 10(-4) s(-1) with increasing MeOH content from 2 to 84%, in aqueous organic solvents containing 2% MeCN and 0.004 M NaOH at 35 degrees C.     

Intramolecular general base catalyzed ester hydrolysis. The hydrolysis of 2-aminobenzoate esters

Rate constants have been obtained for the hydrolysis of the trifluoroethyl, phenyl, and p-nitrophenyl esters of 2-aminobenzoic acid at 50 degrees C in H(2)O. The pseudo-first-order rate constants, k(obsd), are pH independent from pH 8 to pH 4 (the pK(a) of the amine group conjugate acid). The 2-aminobenzoate esters hydrolyze with similar rate constants in the pH-independent reactions, and these water reactions are approximately 2-fold slower in D(2)O than in H(2)O. The most likely mechanism involves intramolecular general base catalysis by the neighboring amine group. The rate enhancements in the pH-independent reaction in comparison with the pH-independent hydrolysis of the corresponding para substituted esters or the benzoate esters are 50-100-fold. In comparison with the hydroxide ion catalyzed reaction, the enhancement in k(obsd) at pH 4 with the phenyl ester is 10(5)-fold. Intramolecular general base catalyzed reactions are assessed in respect to their relative advantages and disadvantages in enzyme catalysis. A general base catalyzed reaction can be more rapid at low pH than a nucleophilic reaction that has a marked dependence on pH and the leaving group.     

Hydrolysis of p-nitrophenyl picolinate catalyzed by metal complexes of N-alkyl-3,5-bis(hydroxymethyl)-1,2,4-triazole in CTAB micelles

Two lipophilic ligands containing triazole and hydroxyl groups, N-alkyl(C(n)H(2n+1))-3,5-bis(hydroxymethyl)-1,2,4-triazole (n=10 and 12), were synthesized. Effects of their Cu(II) and Ni(II) complexes on the hydrolysis of p-nitrophenyl picolinate (PNPP) in cetyltrimethylammonium bromide (CTAB) micelles have been investigated kinetically, and some kinetic parameters of the reactions were obtained by employing the ternary complex kinetic model for metallomicellar catalysis. It was found that Cu(II) complexes of these triazole-based ligands showed more effective catalytic activity on the hydrolysis of PNPP than Ni(II) complexes. Also, the apparent first-order rate constants for product formation in the metallomicellar phase (k(N)(')), the association constants between the substrate and the binary complex (K(T)), and the association constants between the metal ion and the ligand (K(M)) increased with an increase in pH value, which may be attributed to an increase in the nucleophilicity of the hydroxyl groups in the ligand or the electrophilicity of the substrate at higher pH. In addition, at constant pH, k(N)(') and K(T) increased with an increase in the hydrocarbon chain length of the ligand, while K(M) decreased.     

Determination of formation constants of hydroxo and carbonate complexes of Pr(3+) in 2 M NaCl at 303 K

The hydrolysis of praseodymium III in 2 M sodium chloride at 303 K was studied. Two methods were used: pH titration followed by a computational refinement and solvent extraction in the presence of a competitive ligand. The hydrolysis constants obtained by pH titration were: logbeta(1,H)=-7.68+/-0.07, logbeta(1,2H)=-15.10+/-0.03, and beta(1,3H)=-23.80+/-0.04. The stability constants of praseodymium carbonate complexes were determined by pH titration as well and were: logbeta(1,CO(2-)(3))=5.94+/-0.08 and logbeta(1,2CO(2-)(3))=11.15+/-0.15. Praseodymium carbonate species were taken into consideration for calculating the first hydrolysis constants by the solvent extraction method and the value obtained was: logbeta(1,H)=-7.69+/-0.27. The values for logbeta(1,H) attained by both methods are the same. The species-distribution diagram was obtained from the stability constants of praseodymium carbonate complexes and hydrolysis products in the conditions of the present work.     

Kinetics and Mechanism of Aminolysis of Phenyl Acetates in Aqueous Solutions of Poly(ethylenimine)

Second-order rate constants (k(n)) for the aminolysis of some phenyl acetates with poly(ethylenimine) (PEI) were obtained in a pH range 4.36-11.20 at 25 degrees C in 1 M KCl. Linear Bronsted-type plots (log k(n) vs pK(N) of PEI) were found for less reactive esters 2-nitrophenyl acetate, 4-acetoxy-3-chlorobenzoic acid, and 4-acetoxybenzenesulfonate with slopes of 0.92, 0.99, and 0.82, respectively. Curved plots were obtained for 3-acetoxy-2,6-dinitrobenzoic acid and 4-acetoxy-3-nitrobenzenesulfonate, which are consistent with a stepwise reaction. The most likely mechanism involves the existence of a tetrahedral intermediate (T(+/-)) and a change in the rate-determining step from its breakdown to its formation when the basicity of the polyamine increases. A semiempirical equation was used to calculate the values of limiting slopes of the plots (0.9 and 0.1 for both esters) and pK(N) at the center of the curvature of the plots (pK(N degrees ) = 7.94 and 9.02, respectively). The values of pK(N degrees ) are lower than those estimated for the aminolysis of the same esters with simple monomeric amines (pK(n degrees ) > 11) because of a better leaving ability of the aryl oxide ion from the tetrahedral intermediate when amino groups of PEI instead of simple amines are involved. Estimation of the pK's of the reactive intermediates and of the microscopic rate constants for the proton transfer from T(+/-) to PEI or from PEIH(+) to T(+/-) indicates that either base or acid catalysis is unimportant in the aminolysis of these esters by PEI.     

人血清白蛋白与手性药物相互作用的毛细管电泳研究Ⅱ.药物对映体竞争结合参数的测定

 运用毛细管电泳（CE）技术,在对碱性药物Verapamil（VER）手性拆分的基础上对Verapamil与人血清白蛋白（HSA）平行体系进行了相互作用研究。通过定量HSA－VER体系中VER对映体的浓度,建立对映体对结合位点竞争的理论方程,获得了R和S型药物对映体与HSA的结合常数,其值分别为K（R）-VER=2．7×103×（±4．4×102）和K（S）-VER=8．5×102（±1.0×102）。实验证实,HSA具有手性选择性,与（R）－VER的结合强于与（S）-VER的结合,结合比随着HSA与（±）VER的浓度比而变化。     

Kinetics of alkaline hydrolysis of organic esters and amides in neutrally-buffered solution

Reaction rate constants for the hydrolysis of organic esters and amides were determined at temperatures of 100–240°C in aqueous solutions buffered at pH values between 5.5 and 7.3. Experiments are modeled assuming alkaline hydrolysis with a thermodynamic solution model included to account for the temperature dependence of hydroxide ion concentration. In most cases, the ester hydrolysis second order rate constants agree well with published values from experiments in strongly basic solutions at pH values from 11 to 14 and temperatures from 25–80°C, despite the large extrapolations required to compare the data sets. The amide hydrolysis rate constants are about one order of magnitude higher than the extrapolated results from other investigators, but the reaction rate increased proportionally with hydroxide ion concentration, suggesting that an alkaline hydrolysis mechanism is also appropriate. These data establish the validity of the alkaline hydrolysis mechanism and can be used to predict hydrolysis reaction rates in neutrally-buffered solutions such as many groundwater and geothermal fluids.     

Development of adenosine sensor: effect of physiological buffers on activity and sensitivity in adenosine determinations by fast scan voltammetry

A new fast scan voltammetry (FSV) method was tested in the determinations of adenosine in physiological buffers at pH 7.4. The buffers can be used in the determinations of adenosine in vivo and include 7 x 10(-2) M phosphate, Krebs-Henseleit (K-H) and Hanks' Balanced Salts (HBSS). A new method of fabrication of carbon fiber electrodes (CFEs) by polishing, followed by electrochemical pretreatment (ECP) was developed for the determination. After the ECP of CFE, CFE background current was stable in FSV determinations even though an increase in the background current was observed after the ECP in the buffers at pH 7.4. The sensitivity in FSV determinations of adenosine at the pretreated electrodes was tested in the physiological buffers at the potential scan rate of 500 V s(-1) at pH 7.4. Buffer composition and pH was the same during the ECP of CFE and in the FSV determinations. The sensitivity in the FSV determinations of adenosine at the new CFEs was high, compared to that previously reported at CFEs prepared by other methods, and showed a limited dependence on buffer composition. However, a small increase in buffer pH above 7.4 resulted in a decrease in sensitivity in the determinations of adenosine. The decrease in sensitivity was associated with an additional increase in CFE background current at pH > 7.4. At pH 7.4 best sensitivity and limit of detection was obtained in 7 x 10(-2) M phosphate buffer, where the background current was lowest. The sensitivity was half that in K-H and HBSS. Standard deviation of measurements was ca. 1%. The results demonstrate the feasibility of sensitive FSV determinations of adenosine in physiological buffers at pH 7.4 at CFEs.     

Reactivity and selectivity in the inhibition of elastase by 3-oxo-beta-sultams and in their hydrolysis

3-oxo-beta-sultams are both beta-sultams and beta-lactams and are a novel class of time-dependent inhibitors of elastase. The inhibition involves formation of a covalent enzyme-inhibitor adduct with transient stability by acylation of the active-site serine resulting from substitution at the carbonyl centre of the 3-oxo-beta-sultam, C-N fission, and expulsion of the sulfonamide. The lead compound, N-benzyl-4,4-dimethyl-3-oxo-beta-sultam 1 is a reasonably potent inhibitor against porcine pancreatic elastase with a second-order rate constant of 768 M(-1) s(-1) at pH 6, but also possesses high chemical reactivity with a half-life for hydrolysis of only 6 mins at the same pH in water. Interestingly, the hydrolysis of 3-oxo-beta-sultams occurs at the sulfonyl centre with S-N fission and expulsion of the amide leaving group, whereas the enzyme reaction occurs at the acyl centre. Increasing selectivity between these two reactive centres was explored by examining the effect of substituents on the reactivity of 3-oxo-beta-sultam towards hydrolysis and enzyme inhibition. The inhibition activity against porcine pancreatic elastase has a much higher sensitivity to substituent variation than does the rate of alkaline hydrolysis. A difference of 2000-fold is observed in the second-order rate constants, k(i), for inhibition whereas there is only a 100-fold difference in the second-order rate constants, k(OH), for alkaline hydrolysis within the series. The higher sensitivity of enzyme inhibition to substituents than that of simple chemical reactivity indicates a significant degree of molecular recognition of the 3-oxo-beta-sultams by the enzyme.     

Analogs of pyrimidine nucleosides. 19. Synthesis,antineoplastic activity,and kinetics of the hydrolysis of 1-(3-phthalidyl)-5-fluorouracils

1-(3-Phthalidyl)-5-fluorouracils were synthesized by alkylation of 2,4-bis(trimethylsilyl)-5-fluorouracil with substituted 3-bromophthalides, and the rate constants for hydrolysis at pH 8.0–11.5 were determined. The antineoplastic activity of a number of the compounds was established, and it was assumed that there is a relationship between the biological activity and the rate of hydrolysis.See [1] for communication 18.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1406–1411, October, 1985.     

Ester hydrolysis by a cyclodextrin dimer catalyst with a metallophenanthroline linking group

A novel beta-cyclodextrin dimer, 1,10-phenanthroline-2,9-dimethyl-bridged-bis(6-monoammonio-beta-cyclodextrin) (phenBisCD, L), was synthesized. Its zinc complex (ZnL) has been prepared, characterized, and applied as a new catalyst for diester hydrolysis. The formation constant (logK(ML)=9.56+/-0.01) of the complex and deprotonation constant (pK(a)=8.18+/-0.04) of the coordinated water molecule were determined by a potentiometric pH titration at (298+/-0.1) K. Hydrolytic kinetics of carboxylic acid esters were performed with bis(4-nitrophenyl) carbonate (BNPC) and 4-nitrophenyl acetate (NA) as substrates. The obtained hydrolysis rate constants showed that ZnL has a very high rate of catalysis for BNPC hydrolysis, giving a 3.89x10(4)-fold rate enhancement over uncatalyzed hydrolysis at pH 7.01, relative to only a 42-fold rate enhancement for NA hydrolysis. Moreover, the hydrolysis second-order rate constants of both BNPC and NA greatly increases with pH. Hydrolytic kinetics of a phosphate diester catalyzed by ZnL was also investigated by using bis(4-nitrophenyl) phosphate (BNPP) as the substrate. The pH dependence of the BNPP cleavage in aqueous buffer shows a sigmoidal curve with an inflection point around pH 8.11, which was nearly identical to the pK(a) value from the potentiometric titration. The k(cat) of BNPP hydrolysis promoted by ZnL was found to be 9.9x10(-4) M(-1) s(-1), which is comparatively higher than most other reported Zn(II)-based systems. The possible intermediate for the hydrolysis of BNPP, BNPC, and NA catalyzed by ZnL is proposed on the basis of kinetic and thermodynamic analysis.     

Kinetics and mechanism of the comproportionation of hypothiocyanous acid and thiocyanate to give thiocyanogen in acidic aqueous solution

The kinetics of comproportionation of hypothiocyanous acid (HOSCN) and thiocyanate (SCN-) to give thiocyanogen ((SCN)2) in acidic aqueous solutions have been determined by double-mixing stopped-flow UV spectroscopy. Hypothiocyanite (OSCN-) was generated at pH 13 by oxidation of excess SCN- with hypobromite (OBr-), followed by a pH jump to acidic conditions ([H+] = 0.20-0.46 M). The observed pseudo-first-order rate constants exhibit first-order dependencies on [H+] and [SCN-] with overall third-order kinetics. The corresponding kinetics of hydrolysis of (SCN)2 have also been examined. Under conditions of high (and constant) [H+] and [SCN-], the kinetics exhibit second-order behavior with respect to [(SCN)2] and complex inverse dependences on [H+] and [SCN-]. Under conditions of low [H+] and [SCN-], the kinetics exhibit first-order behavior with respect to [(SCN)2] and independence with respect to [H+] and [SCN-]. We attribute this behavior to a shift in the rate-limiting step from disproportionation of HOSCN (second-order dependency on [(SCN)2]) to rate-limiting hydrolysis (first-order dependency on [(SCN)2]). Thus, we have determined the following equilibrium constant by the kinetic method: (SCN)2 + H2O HOSCN + SCN- + H+; Khyd = [HOSCN][SCN-][H+]/[(SCN)2] = khyd/kcomp = 19.8(+/-0.7) s-1/ 5.14(+/-0.07) x 103 M-2 s-1 = 3.9 x 10-3 M2.     

Hydrolysis of uranium(VI) at variable temperatures (10-85 degrees C)

The hydrolysis of uranium(VI) in tetraethylammonium perchlorate (0.10 mol dm(-3) at 25 degrees C) was studied at variable temperatures (10-85 degrees C). The hydrolysis constants (*beta(n,m)) and enthalpy of hydrolysis (Delta H(n,m)) for the reaction mUO(2)(2+) + nH(2)O = (UO(2))(m)(OH)(n)((2m-n))+) + nH(+) were determined by titration potentiometry and calorimetry. The hydrolysis constants, *beta(1,1), *beta(2,2), and *beta(5,3), increased by 2-5 orders of magnitude as the temperature was increased from 10 to 85 degrees C. The enthalpies of hydrolysis, Delta H(2,2) and Delta H(5,3), also varied: Delta H(2,2) became more endothermic while Delta H(5,3) became less endothermic as the temperature was increased. The heat capacities of hydrolysis, Delta C(p(2,2)) and Delta C(p(5,3)), were calculated to be (152 +/- 43) J K(-1) mol(-1) and -(229 +/- 34) J K(-1) mol(-1), respectively. UV/Vis absorption spectra supported the trend that hydrolysis of U(VI) was enhanced at elevated temperatures. Time-resolved laser-induced fluorescence spectroscopy provided additional information on the hydrolyzed species at different temperatures. Approximation approaches to predict the effect of temperature were tested with the data from this study.     

Effect of chloride ion on the kinetics and mechanism of the reaction between chlorite ion and hypochlorous acid

The effect of chloride ion on the chlorine dioxide formation in the ClO 2 (-)-HOCl reaction was studied by following .ClO 2 concentration spectrophotometrically at pH 5-6 in 0.5 M sodium acetate. On the basis of the earlier experimental data collected without initially added chloride and on new experiments, the earlier kinetic model was modified and extended to interpret the two series of experiments together. It was found that the chloride ion significantly increases the initial rate of .ClO 2 formation. At the same time, the .ClO 2 yield is increased in HOCl but decreased in ClO 2 (-) excess by the increase of the chloride ion concentration. The two-step hydrolysis of dissolved chlorine through Cl 2 + H 2O left harpoon over right harpoon Cl 2OH (-) + H (+) and Cl 2OH (-) left harpoon over right harpoon HOCl + Cl (-) and the increased reactivity of Cl 2OH (-) compared to HOCl are proposed to explain these phenomena. It is reinforced that the hydrolysis of the transient Cl 2O 2 takes place through a HOCl-catalyzed step instead of the spontaneous hydrolysis. A seven-step kinetic model with six rate parameters (constants and/or ratio of constants) is proposed on the basis of the rigorous least-squares fitting of the parameters simultaneously to 129 absorbance versus time curves measured up to approximately 90% conversion. The advantage of this method of evaluation is briefly outlined.     

Mechanisms for the solvolytic decompositions of nucleoside analogues—VIII: Acidic Hydrolysis of 5-substituted 1-(alkoxyethyl)cytosines and cytidines

Several 5-substituted 1-(l-alkoxyethyl)cytosines have been prepared and the rate constants for their hydrolysis determined at various concentrations of oxonium ion. The acidity constants for the monoprotonated substrates and the rate constants for their decomposition have been calculated from the pH-rate profiles obtained. The effecs that varying the polar nature of the l-alkoxyethyl group exerts on the heterolysis of the monoprotonated substrates are interpreted to indicate that the acidic hydrolysis of l-(l-alkoxyethyl)cytosines proceeds by rate-limiting departure of the protonated base moiety with formation of an oxocarbenium ion intermediate. The same mechanism is extended to the hydrolysis of cytidines by comparing the influences that the 5-substituents have on the heterolysis of protonated 5-substituted l-(l-ethocyethyl)cytosines and correspondingly substituted cytidines.     

Hydrolysis of alpha-alkyl-alpha-(methylthio)methylene Meldrum's acids. A kinetic and computational investigation of steric effects

The rates of hydrolysis of alpha-R-alpha-(methylthio)methylene Meldrum's acids (8-R with R = H, Me, Et, s-Bu, and t-Bu) were determined in basic and acidic solution in 50% DMSO-50% water (v/v) at 20 degrees C. In basic solution (KOH), nucleophilic attack to form a tetrahedral intermediate (T(OH)-) is rate limiting for all substrates (k1(OH)). In acidic solution (HCl) and at intermediate pH values (acetate buffers), water attack (k1(H2O) is rate limiting for 8-Me, 8-Et, and 8-s-Bu; the same is presumably the case for 8-t-Bu, but rates were too slow for accurate measurements at low pH. For 8-H, water attack is rate limiting at intermediate pH but at pH < 4.5 MeS- departure from the tetrahedral intermediate becomes rate limiting. Our interpretation of these results is based on a reaction scheme that involves three pathways for the conversion of T(OH)- to products, two of which being unique to hydrolysis reactions and taking advantage of the acidic nature of the OH group in T(OH)-. This scheme provides an explanation why even at high [KOH] T(OH)- does not accumulate to detectable levels even though the equilibrium for OH- addition to 8-R is expected to favor T(OH)-, and why at low pH water attack is rate limiting for R = Me, Et, s-Bu, and t-Bu but leaving group departure becomes rate limiting with the sterically small R = H. The trend in the k1(OH) and k1(H2O) indicates increasing steric crowding at the transition state with increasing size of R, but this effect is partially offset by a sterically induced twisting of the C=C double bond in 8-R which leads to its elongation and makes the substrate less stable and hence more reactive. Our computational results suggest that this effect becomes particularly pronounced for R = t-Bu and explains why k1(OH) for 8-t-Bu is somewhat higher than for the less crowded 8-s-Bu.