Copper complexes with 1,10-phenanthrolines tethered to a cyclotriphosphazene platform

The synthesis of two ligands, L¹ and L², each containing two 2-oxy-1,10-phenanthroline moieties attached to the same phosphorus atom of a substituted cyclotriphosphazene ring via an oxy-bridge, but differing in substitution on the biphenyl capping groups, is described. The single-crystal X-ray structure of L¹ · 2CH₂Cl₂ shows an ordered structure in the lattice with channels, containing dichloromethane molecules, running parallel to the a-axis. The reactions of L¹ and L² with [Cu(MeCN)₄](PF₆) afford the dimetallic copper(I) derivatives, [(CuL¹)₂] (PF₆)₂ · CH₂Cl₂ and [(CuL²)₂](PF₆)₂. The single-crystal X-ray structure of the former complex shows that the L¹ ligands of the cation [(CuL¹)₂]²⁺ act as a bridges coordinating to the two copper(I) centres in a helical fashion. The copper atoms have distorted tetrahedral geometries with the interligand dihedral angle being 85°. With copper(II) chloride and copper(II) perchlorate, the monomeric copper(II) complexes, [CuL¹Cl]Cl · 2CH₂Cl₂, [CuL²Cl]Cl · CH₂Cl₂, [CuL¹(OMe)]PF₆ · 2H₂O, [CuL²(OMe)]PF₆ · 2H₂O, [CuL¹(OH₂)](ClO₄)₂ and [CuL²(OH₂)](ClO₄)₂ · H₂O are obtained. The single-crystal X-ray structure of [CuL¹Cl]Cl · 2CH₂Cl₂ shows the copper to be in a square-base pyramidal distorted trigonal-bipyramidal (SBPDTB) environment (τ = 0.57) with L¹ acting as a κ⁴N donor, coordinating via the four nitrogen atoms of the two tethered 1,10-phenanthrolines. In CH₃CN, this complex undergoes hydrolysis via the presence of adventitious water losing one oxyphenanthroline arm to form the centrosymmetric dimetallic species, [(CuL³Cl)₂] · 4CH₃CN · 3H₂O (L³ = [N₃P₃(biph)₂(ophen)O]⁻ where biph = 2,2′-dioxybiphenyl and O replaces an oxyphenanthroline and is attached to the phosphorus of the phosphazene ring). The two monomeric units, which are linked by bridging chlorine atoms, have a distorted square-based pyramidal geometry about the copper with the basal plane made by the ‘ON₂Cl’ ligand set. Spectroscopic (mass spectral, electronic and ESR) and magnetic moment data for the complexes are discussed.     

Copper(II) halide salts and complexes of 4-amino-2-fluoropyridine: synthesis,structure and magnetic properties

Reaction of 4-amino-2-fluoropyridine (2-F-4-AP) with copper halides produced the neutral coordination complexes: (2-F-4-AP)₂CuX₂ (X = Cl(1), Br(2)). 1 crystallizes in the orthorhombic space group Pccn in a distorted square planar geometry. Magnetic susceptibility data were fit to the uniform chain Heisenberg model resulting in C = 0.439(6)emu-K/mole-Oe and J = ?28(1) K. 2 crystallizes in the monoclinic space group C2/m and is closer to distorted tetrahedral. Intermolecular Br?Cu contacts generate a square layer. Magnetic data show very weak ferromagnetic interactions [C = 0.42(1)emu-K/mol-Oe, J = 0.71(2) K]. Similarly, reaction of 2-F-4-AP with copper halides and aqueous HX in alcohol solvents produced the salts (2-F-4-APH)₂CuX₄ (X = Cl(3), Br(4)). 3 crystallizes in the triclinic space group P-1. Crystal packing reveals short Cl?Cl contacts which generate a structural ladder. However, analysis of the magnetic data suggests that only the rails of the ladder produce a viable magnetic superexchange pathway; the uniform Heisenberg chain model provides C = 0.449(1)emu-K/mol-Oe and J = -6.9(1) K. 4 is isostructural and is also best fit by a chain model [J = ?2.7(4) K]. The brominated complex (2-F-3-Br-4-APH)₂CuBr₄·2H₂O, 5, (2-F-3-Br-4-APH = 4-amino-3-bromo-2-fluoropyridinium) was serendipitously produced as a byproduct of the synthesis of 4 and was characterized by single-crystal X-ray diffraction.     

The synthesis and structural characterisation of the mercury (II) halide complexes of the phosphorus ylide carbethoxymethylenetriphenylphosphorane

The reaction of the ylide carbethoxymethylenetriphenylphosphorane (EPPY), Ph₃PCHCOOEt, with mercury (II) halides has been investigated. The resulting dimeric mercury (II)-ylide complexes are isostructural and of the form [(EPPY)(HgX₂)]₂ where X is either bromine (1), chlorine (2), or iodine (3). These complexes have been characterised by spectroscopic techniques and X-ray diffraction. The ylide ligands have been shown to be C-coordinated to the mercury (II) atom.     

Synthesis,spectroscopic and X-ray structural studies of mercury(II) halide complexes of 4-methoxybenzoylmethylenetriphenylphosphorane

The reactions of the title ylide {(C₆H₅)₃PCHCOC₆H₄OCH₃)} (MBPPY) with mercury(II) chloride and mercury(II) bromide in equimolar ratios using methanol as the solvent produces crystals of [(MBPPY) · HgCl₂]₂ (1) and [(MBPPY) · HgBr₂]₂ (2), respectively. Single crystal X-ray analyses reveal the presence of centrosymmetric dimeric structures containing the ylide and HgX₂ (X = Cl or Br) in both cases. The IR and NMR data of the product [(MBPPY) · HgI₂]₂ (3), formed by the reaction of mercury(II) iodide with the same ylide, are similar to those of 1 and 2. Analytical data indicate a 1:1 stoichiometry between the ylide and Hg(II) halide in each of the three products.     

Copper(II) complexes with 2-[(2-pyridin-2-yl-ethylimino)-methyl]-phenol and its substituted derivatives: Syntheses,physical properties and structures

Five new complexes of copper(II) having the general formula [CuL(OAc)], where HL and OAc⁻ represent the N,N,O-donor 4-R-2-[(2-pyridin-2-yl-ethylimino)-methyl]-phenol (R = H, Br, NO₂ and OMe) or 5-methoxy-2-[(2-pyridin-2-yl-ethylimino)-methyl]-phenol and acetate, respectively have been reported. The complexes have been synthesized in 52–80% yields by reacting one mole equivalent each of Cu(OAc)₂·H₂O, 2-(2-aminoethyl)pyridine and the appropriate substituted salicylaldehyde in methanol. The solid state effective magnetic moments of the complexes at 298 K are within 1.79–1.97 μ_B. In solution, all the complexes are electrically non-conducting. The electronic spectra of these species display a weak ligand-field band within 640–615 nm and several strong charge transfer bands in the range 410–235 nm. The complexes are EPR active. The frozen (120 K) solution spectral parameters are g_|| = 2.22–2.23, A_|| = 189–191 × 10⁻⁴ cm⁻¹, _g⊥$g_{\perp }$ = 2.06–2.07, and _A⊥(N₎$A_{\perp (\text{N})}$ = 10–16 × 10⁻⁴ cm⁻¹. X-ray structures show that the ligand L⁻ coordinates the metal center through the phenolate-O, the imine-N and the pyridine-N and forms two six-membered chelate rings. The acetate is bidentate but asymmetric with respect to the Cu–O as well as C–O bond lengths. Only the complex where R = Br dimerises due to two reciprocal Cu?Br interactions.     

Copper(II) coordination compounds with ferulic acid

The first two molecular structures of the ferulic acid (3-(4-hydroxy-3-methoxyphenyl)-2-propenoic acid, C₁₀H₁₀O₄) coordination compounds are presented, namely, [Cu₂(C₁₀H₉O₄)₄(CH₃CN)₂] 1 and [Cu₂(C₁₀H₉O₄)₄(C₆H₆N₂O)₂]·4CH₃CN (C₆H₆N₂O = nicotinamide) 2. Both compounds were synthesised from the starting mixture of Cu₂O and CuCl upon copper oxidation in the acetonitrile solution. The single-crystal X-ray diffraction analysis of 1 and 2 reveals the binuclear structure of the ‘paddle–wheel’ type for both complexes. 1 and 2 are unstable outside mother liquid due to loosely bound acetonitrile molecules. The final products of decomposition are [Cu₂(C₁₀H₉O₄)₄] 1a and [Cu₂(C₁₀H₉O₄)₄(C₆H₆N₂O)₂] 2a, which were characterized by several physico-chemical methods. The triplet X-band EPR spectra of 1a and 2a, showing signals B_Z1  15 mT, B₂  460 mT and B_Z2  580 mT, are in agreement with the expected data for the binuclear tetracarboxylate units, found in the structures of the parent complexes 1 and 2. Together with the room temperature magnetic susceptibility data, μ_eff/B.M. 1.40 (1a), 1.48 (2a), the EPR spectra analysis confirm the antiferromagnetic interaction in 1a and 2a. This is suggesting preservation and stability of the paddle–wheel structures in 1a and 2a.     

Systematic structural studies on cobalt(II) complexes of tricyclohexylphosphine oxide and related ligands

The new cobalt(II) phosphine oxide complexes Co(Cy₃PO)₂Cl₂ (1), Co(Cy₃PO)₂Br₂ (2), Co(Cy₃PO)₂I₂ (3), Co(Ph₂CyPO)₂Cl₂ (4), Co(Ph₂CyPO)₂Br₂ (5), Co(Ph₂CyPO)₂I₂ (6), Co(Ph₂EtPO)₂Br₂ (7), Co(Cy₃PO)₂(NCS)₂ (8) and Co(Cy₃PO)₂(NO₃)₂ (9) have been prepared mainly by the reaction of anhydrous CoX₂ (X = Cl, Br, I, NCS, NO₃) with the appropriate phosphine oxide. The complexes were characterised by single-crystal X-ray crystallography supported by IR and UV-Vis absorption spectroscopy. The structural analyses show that the cobalt(II) centre adopts a distorted tetrahedral coordination geometry except for 9 which displays an octahedral geometry. Systematic structural features of these complexes are explained within this paper.     

Synthesis and characterization of bis(organothiolato)mercury(ii) complexes by disproportionation of Hg2Cl2 in the presence of thiols

Mercury(I) chloride disproportionates to mercury metal and bis(organothiolato)mercury(II) in the presence of some thiols in good yields. The products were analyzed by means of ¹H?NMR and gas chromatographic–mass spectrometry (GC/MS), which indicated that the complexes are monomers in the gas phase and decomposed at elevated temperature to mercury(0) and corresponding disulfides.     

Nickel and copper complexes of cyclopropyltetrazole: crystal structures of [Ni(C3tz)6](BF4)2 and [Cu(C3tz)6](BF4)2

Cyclopropyltetrazole (C₃tz) and its nickel(II) and copper(II) complexes [M(C₃tz)₆](BF₄)₂] were isolated and characterized by elemental analyses, electronic spectroscopy, molar conductances, magnetic susceptibilities and single-crystal X-ray analyses.     

Synthesis and characterization of potassium 1,3-bis(N-methylpiperazino)propan-2-O-xanthate and the complexes of Co(II), Ni(II) and Cu(I) ions

Potassium 1,3-bis(N-methyl piperazino)propan-2-O-xanthate (LK), and its complexes with Co(II), Ni(II) and Cu(I) ions have been prepared and characterized as [CoL₂(H₂O)₂], [NiL₂(H₂O)₂]·2H₂O and CuL·2H₂O by FT-IR, ¹H and ¹³C?NMR spectroscopies, elemental analyses, magnetic susceptibility and TGA techniques.     

Preparation,characterization and applications of polyurethane foam functionalized with resorcinol for quantitative separation and determination of silver(I) and mercury(II) from tap and wastewater

A stable chelating resin matrix was prepared by covalently linking resorcinol with polyurethane foam matrix through a –N=N– group. Preconcentration and determination of trace Ag⁺ and Hg²⁺ ions from samples of different origin, using Res-PUF, were studied. Various conditions influencing the sorption of these metal ions onto Res-PUF were optimized. The kinetics of sorption of the Ag⁺ and Hg²⁺ by Res-PUF were found to be fast, reached equilibrium in few minutes (5–10?min) and followed a first-order rate equation with an overall rate constant k in 0.102 and 0.267/min, respectively. Study of the variation of the sorption of the tested metal ions with temperature yielded average values for ΔG, ΔH and ΔS of ?3.94, ?22.02 and ?58.37, respectively. The mean free sorption energy (E) computed from the Dubinin–Radushkevich (D–R) isotherm was found to be equal to 8.91 kJ/mol, which reflects the chelation sorption process. The capacities of the foam material were 0.15 and 0.07?mmol/g for Ag⁺ and Hg²⁺, respectively. Preconcentration factors of?>?50 were achieved (RSD?≈?5.99). The proposed preconcentration procedure was applied successfully to the determination of trace metal ions in natural and wastewater samples.     

Natural pyrite as an electrochemical sensor for potentiometric titrations with EDTA, mercury(II) and silver(I)

The results obtained in potentiometric titrations of copper(II), mercury(II) and iron(III) with standard EDTA solutions are presented. The titration of copper(II) at pH values in the range from 8.11 to 10.99 (ammonia buffer) and the titration of mercury(II) and iron(III) at pH values from 3.59 to 5.65 (acetate buffer) were performed. The titration end-point (TEP) was detected with an indicator electrode made from natural crystalline pyrite as an electrochemical sensor. The results obtained in potentiometric titration with the pyrite electrode were compared with those obtained using a platinum electrode (Fe³⁺), a Cu ion selective electrode (Cu²⁺) and a Hg electrode (Hg²⁺). Accurate and reproducible results with good agreement were obtained, but higher potential changes at the TEP were obtained using the pyrite electrode. In the course of the titration the potential was established within less than 1 min, whereas at the TEP it was within about 2–3 min. The potential changes at the TEP were in the range from 60 to 200 mV per 0.1 ml EDTA, according to the stability constant of the complex formed. The highest potential changes, ranging from 160 to 200 mV, were obtained in the titration of iron(III) at pH 3.59. Reverse titration was also performed and accurate and reproducible results were obtained. Moreover, titration of halogenide and thiocyanate with standard mercury(II) solutions, as well as cyanide with silver(I) solution, were performed and accurate and reproducible results were again obtained. Received: 20 February 1998 / Accepted: 19 November 1999     

Spectrophotometric study of coproporphyrin-I complexes of copper(II) and cobalt(II)

The reagent 3,8,13,18-tetramethyl-21H,23H-porphine-2,7,12,17-tetrapropionic acid or coproporphyrin-I (CPI) was used for the spectrophotometric determination of copper(II) and cobalt(II) in the presence of pyridine and imidazole catalysts. Optimum conditions were investigated and the methods were applied to the determination of parts per billion levels of copper(II) and cobalt(II). The Sandell sensitivities of the recommended procedures were 0.568 μm cm⁻² and 0.464 μg cm⁻² (for A = 0.001) for copper and cobalt, respectively. The relative standard deviations were 2.0% for copper and 1.0% for cobalt. The kinetics of the reaction of CPI with copper(II) and cobalt(II) in the presence of the catalysts and the influence of the temperature were studied, and their kinetic constants determined.The influence of light on the photodecomposition of CPI was also studied.     

Polymeric structures in the metal complexes of 5-sulfosalicylic acid: The rubidium(I), caesium(I) and lead(II) analogues

The complexes of 3-carboxy-4-hydroxybenzenesulfonic acid (5-sulfosalicylic acid, H₃SSA) with rubidium(I), caesium(I) and lead(II) have been synthesized and characterized using single-crystal X-ray methods at 130 K. The rubidium(I) complex 1, [Rb₃(H₂SSA)(HSSA)(H₂O)₄]_n, is an unstable hydrate variant of a previously described complex [Rb(H₂SSA)(H₂O)]_n, and comprises three independent and different seven-coordinate metal polyhedra interlinked through oxygen donors of the sulfonate, carboxylate and phenolate groups of the 5-sulfosalicylate ligands (one of which is dianionic, the other monoanionic), and one bridging water, giving a three-dimensional hydrogen-bonded framework polymer structure. The anhydrous caesium(I) complex 2 [Cs(H₂SSA)]_n, which has been previously described in a room-temperature determination, has a three-dimensional framework polymer structure based on an irregular Cs–O₉ repeating unit. Complex 3 with lead(II), [Pb(H₂SSA)₂(H₂O)]_n, forms helical step-polymer ribbon substructures having an irregular Pb–O₇ coordination centre comprising a single monodentate water and six sulfonate-O donors bridging three separate metals. The carboxylic acid and phenol substituent groups of the 5-sulfosalicylate ligand link the ribbons peripherally through hydrogen bonds, giving a three-dimensional layered framework polymer structure.     

Copper(II) complexes with aroylhydrazones

The coordination chemistry of copper(II) with tridentate aroylhydrazones is briefly discussed in this article. Two types of aroylhydrazones derived from aroylhydrazines and ortho-hydroxy aldehydes or 2-pyridine-carboxaldehyde have been used. The characterization of the complexes has been performed with the help of various physico-chemical techniques. Solid state structural patterns have been established by X-ray crystallography. In the solid state, structural varieties of these complexes are seen to range from monomeric, dimeric, polymeric and one-dimensional self-assembly via hydrogen bonds and π-π interactions. EPR spectroscopy and variable temperature magnetic susceptibility measurements have been used to reveal the nature of the coordination geometry and magnetic characteristics of these complexes.     

Copper(II)-activated transformation of azomethine to imidate: synthetic and structural studies

The Schiff base 2-pyridine–carboxaldehyde 4-dimethylaminobenzoylhydrazone (HL, 1) was prepared by reacting 2-pyridine–carboxaldehyde and 4-dimethylaminobenzoylhydrazine in a 1:1 molar ratio in methanol. Reaction of HL (1) with Cu(O₂CCH₃)₂·H₂O (in a 1:1 molar ratio) in methanol afforded a dinuclear copper(II) complex, [Cu₂(μ-O₂CCH₃)₂L′₂]·2H₂O (2). The azomethine functionality (---CH=N---) of 1 is converted to imidate (---C(OMe)=N---) in the complexed ligand L′⁻. Molecular structures of both 1 and 2 were determined by X-ray crystallographic studies. The dinuclear molecule of 2 is centrosymmetric and contains two monoatomic bridging acetate groups. Each copper(II) centre is in a square-pyramidal N₂O₃ coordination sphere. The ligand, L′⁻ coordinates the metal ion via the pyridine-N, the imidate-N, and the deprotonated amide-O atoms. One of the acetate oxygen atoms completes the N₂O₂ square-plane. The oxygen of the symmetry-related acetate fills the apical coordination site. Structural parameters are consistent with both copper ions being in a +2 oxidation state. The room temperature magnetic moment is 1.89 μ_B (per Cu). In powder phase the complex displays an axial EPR spectrum at 298 K. The complex is nonconducting in methanol solution. The electronic spectrum shows a ligand field absorption at 680 nm and charge transfer bands in the range 426–215 nm.     

Synthesis,characterization and crystal structure of new silver(I) and palladium(II) complexes containing 1,2,4-triazole moieties

The reaction of 4-amino-5-ethyl-2H-1,2,4-triazole-3(4H)-thione (AETT, L1) with 2-thiophen carbaldehyde in methanol leads to the corresponding Schiff-base HL1a. The reaction of L1 with AgNO₃ in ethanol gives the ionic complex [{[Ag(L1)]NO₃}₂]_n (1). The ionic complex [(PPh₃)₂Ag(HL1a)₂]NO₃ · CH₃CN (2) can be obtained by the reaction of HL1a with [(PPh₃)₂Ag]NO₃ in methanol and acetonitrile solution, while its reaction with [(PPh₃)₂PdCl₂] in the presence of sodium acetate in methanol leads to the neutral complex [(PPh₃)₂Pd(L1a)₂] · 4MeOH (3). All the compounds were characterized by infrared spectroscopy, elemental analyses as well as by X-ray diffraction studies.     

Cobalt(II), nickel(II), and zinc(II) complexes with bidentate N,N′-bis(β-phenylcinnamaldehyde)-1,2-diiminoethane Schiff base: synthesis and structures

A series of complexes of the type M(Phca₂en)X₂, where Phca₂en=N,N′-bis(β-phenyl-cinnamaldehyde)-1,2-diiminoethane, M(II)=Co, Ni or Zn and X=Cl, Br, I or NCS have been synthesized and characterized. The crystal and molecular structures of Co(Phca₂en)Cl₂ (2), Ni(Phca₂en)Br₂ (5) and Zn(Phca₂en)Cl₂ (6) were determined by X-ray crystallography from single-crystal data. Complexes 2 and 5 are isomorph and isostructure, in which the coordination polyhedron about the central metal ion is distorted tetrahedron with Cl---Co---Cl, 110.17(6)°; N---Co---N, 84.16(13)° and Cl---Zn---Cl, 112.02(6)°; N---Zn---N, 83.45(16)°. The complex 5 crystallizes in triclinic system with two molecules per asymmetric unit, both having nickel ion in distorted tetrahedral geometry, Br---Ni---Br, 122.645(18)° and 125.729(18)°; N---Ni---N, 84.63(9)° and 85.08(9)°. These structures consist of intermolecular hydrogen bonds of the type C---HX. The formation of the C---HM weak intramolecular hydrogen bonds due to the trapping of C---H bonds in the vicinity of the metal atoms are reported for 2, 5 and 6. A ¹H NMR study of Zn complexes gives further evidence for the presence of such interactions and their significance. The spectral properties of the above complexes are also discussed.     

Ligand assembly and metal ion complexation: syntheses and X-ray structures of Ni(II) and Cu(II) benzoate and 4-tert-butylbenzoate complexes of cyclam

The syntheses and X-ray structures of trans-[Ni(O-benzoato)₂(cyclam)], trans-[Cu(H₂O)₂(cyclam)]-(benzoate)₂·2H₂O and trans-[Cu(H₂O)₂(cyclam)](4-t-butyl-benzoate)₂ (where cyclam is 1,4,8,11-tetraazacyclotetradecane) are described. The nickel complex has a tetragonally distorted octahedral coordination geometry with cyclam occupying the equatorial plane in a stable trans-III arrangement, with benzoate ligands filling the axial positions. The structure closely resembles the arrangement in the previously described hydrogen-bonded (metal-free) ligand assembly [(cyclamH₂)·(4-t-butyl benzoate)₂]·2(benzoic acid) if the latter benzoic acid moieties, which do not interact directly with the cyclam moiety, are ignored. The 2?:?1 fragment thus may be viewed as a ligand assembly “preorganized” for nickel ion complexation. In contrast to the nickel structure, the two trans-axial sites in both copper structures are occupied by aqua rather than O-carboxylate ligands. Although they do not form part of the inner coordination sphere in either complex, the two carboxylate anions remain hydrogen bound to the (coordinated) cyclam ligand, with the mode of packing being generally similar in each complex.     

3-(Aryl)-2-sulfanylpropenoates of mercury(II) and phenylmercury(II)

Compounds [HQ]₂[Hg(L)₂] and [HQ][PhHg(L)] [where HQ = diisopropylammonium cation; L = pspa, fspa, tspa, where p = 3-(phenyl), f = 3-(2-furyl), t = 3-(2-thienyl), and spa = 2-sulfanylpropenoato] have been prepared by the reaction of mercury(II) acetate or phenylmercury(II) acetate with the corresponding acid in the presence of diisopropylamine in ethanol. The compounds have been characterized by elemental analysis, FAB mass spectrometry and IR and NMR (¹H, ¹³C) spectroscopy. The crystal structures of the [HQ]₂[Hg(L)₂] compounds show the presence of diisopropylammonium cations and [Hg(L)₂]²⁻ anions. In each anion the Hg atom is in an HgO₂S₂ environment and this can be described as nido-tbp. The crystal structures of the [HQ][PhHg(L)] compounds show the presence of diisopropylammonium cations and [PhHg(L)]⁻ anions in which the Hg atom adopts an HgCOS distorted T-environment. The NMR data suggest that the coordination mode of the ligand L²⁻ determined by X-ray diffractometry in the solid remains in solution.