Homogeneous alkalization of cellulose in <Emphasis Type="Italic">N</Emphasis>-methylmorpholine-<Emphasis Type="Italic">N</Emphasis>-oxide/water solution

Alkali cellulose is an important intermediate in the production of cellulose derivatives. N-methylmorpholine-N-oxide (NMMO)/H₂O was used as a homogeneous reaction medium for the cellulose alkalization process to intensify the alkalization degree and improve the substitution uniformity. The morphology, specific surface area and crystalline structure of pristine cellulose, the as-synthesized alkali cellulose and dissolved-regenerated cellulose were characterized by SEM, BET, XRD and FT-IR, respectively. The results showed that the homogeneous reaction medium not only offered a low mass transfer resistance, but also facilitated a disruption of the hydrogen bond in cellulose, thus resulting in the transformation of the cellulose structure from complicated stacking chains to simple glucose chains. The interior hydroxyl groups in the cellulose became accessible to the alkaline reagent NaOH to enhance the alkalization process for the increase in bonding alkali content and the improvement in substitution uniformity. The bonding alkali content was calculated by the difference between total added alkali and free alkali and was achieved as 0.61 g/g cellulose at the optimized operation conditions: reaction temperature of 95 °C, reaction time of 90 min, NMMO dosage of 90.00 g, cellulose 1.0 g and NaOH concentration of 1.40 wt%. Meanwhile, in the conventional alkalization process, the bonding alkali content was just 0.41 g/g cellulose. The alkali cellulose prepared in NMMO/H₂O medium has a large specific surface area of 125 m² g^?1 and an extremely low crystallinity degree. The NMMO/H₂O system represents a potential homogeneous solvent for the cellulose alkalization process.     

Discoloration of cellulose solutions in <Emphasis Type="Italic">N</Emphasis>-methylmorpholine-<Emphasis Type="Italic">N</Emphasis>-oxide (Lyocell). Part 2: Isolation and identification of chromophores

The Lyocell process is a modern green industrial fiber-making technology, which employs N-methylmorpholine-N-oxide monohydrate (NMMO) to directly dissolve cellulose. One problem in Lyocell processing is the discoloration of the spinning dope due to chemical side reactions. Two different methods were elaborated to isolate chromophores, which are present in minute amounts only, from Lyocell fibers, the first one using hydrogen chloride in alcoholic solution, the second one employing boron trifluoride – acetic acid complex. Several chromophores were unambiguously identified by a combination of analytical techniques and comparison to authentic samples. Carbohydrate condensation products, such as catechols, were shown to dominate in early phases of chromophore formation. In later stages, these initial chromophores undergo further condensation reactions with degradation products of NMMO and NMMO itself, leading to nitrogen-containing heterocycles and quinoid products, among others. The incorporation of nitrogen into the chromophores and thus the participation of the solvent in chromophore formation were proven.     

Discoloration of cellulose solutions in <Emphasis Type="Italic">N</Emphasis>-methylmorpholine-<Emphasis Type="Italic">N</Emphasis>-oxide (Lyocell). Part 1: Studies on model compounds and pulps

N-Methylmorpholine-N-oxide monohydrate (NMMO) is used as solvent for cellulose in the Lyocell process as a modern industrial fiber-making technology. Undesired chemical side reactions and byproduct formation in the system cellulose/NMMO/water are known to cause detrimental effects, such as chromophore formation and discoloration of the resulting fibers. A detailed kinetic study on the influence of carbonyl structures on chromophore formation in NMMO melts was carried out employing UV spectroscopy. Different sugar model compounds, such as reducing or non-reducing sugars, and sugars with additional oxidized functions, were applied. The chromophore formation rate differed widely for various reducing sugar model compounds, with pentoses generally reacting faster than hexoses, and carbohydrates with protected reducing end being largely inert. The effect of carbonyl groups on chromophore generation has been studied further using oligomers and oxidized pulps with different contents of carbonyl groups. As in the case of model compounds, also for the pulps a linear correlation between carbonyl content and chromophore formation rate was established. A distinct effect of hemicelluloses was observed.     

Phase-equilibrium and cellulose-coagulation kinetics for cellulose solutions in <Emphasis Type="Italic">N</Emphasis>-methylmorpholine-<Emphasis Type="Italic">N</Emphasis>-oxide

The dissolution of cellulose in N-methylmorpholine-N-oxide monohydrate and the dissolution of N-methylmorpholine-N-oxide monohydrate in water have been studied via optical interferometry. A part of the phase diagram for the cellulose/N-methylmorpholine-N-oxide system has been constructed. The phase diagram is characterized by crystalline equilibrium, hysteresis of the melting temperatures of the solvents, and a region of anisotropy. Optical interferometry has been used for the first time to study the kinetics of cellulose coagulation during the interaction of cellulose solutions in N-methylmorpholine-N-oxide with water and water solutions of N-methylmorpholine-N-oxide. Information on the values of interdiffusion coefficients and the morphologies of the resulting cellulose films has been obtained. The possibility to use optical interferometry to analyze the interaction of a solution with the coagulating agent in the case of cellulose fiber and film formation has been demonstrated. The influences of temperature, the nature of the coagulating agent, and the cellulose content on the kinetics of the process and morphologies of the formed films have been shown. The use of N-methylmorpholine-N-oxide as a part of the coagulation system decreases the rate of interdiffusion of solutions, thereby resulting in a more uniform and dense morphology of cellulose films. Increased temperature causes diffusion acceleration, thereby leading to the formation of an anisotropic morphology of the cellulose films.     

A cautionary note on thermal runaway reactions in mixtures of 1-alkyl-3-methylimidazolium ionic liquids and <Emphasis Type="Italic">N</Emphasis>-methylmorpholine-<Emphasis Type="Italic">N</Emphasis>-oxide

N-Methylmorpholine-N-oxide (NMMO) cannot be completely separated by extraction from mixtures with common 1,3-dialkylimidazolium ionic liquids (ILs) due to strong ionic interactions between the two components. At elevated temperatures, above approx. 90 °C, especially under dry conditions and in the presence of acid, alkylating or acylating agents, remaining NMMO in ILs tends to undergo autocatalytic degradation. This is a highly exothermic, unstoppable process that results in explosions, flames, and complete charring of the reaction mixtures. Thus, caution must be exercised when drying or heating ILs that were in previous contact with NMMO, and the absence of amine oxide must be confirmed to avoid potential danger.     

Molecular properties of the copolymers of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride and maleic acid

The hydrodynamic and conformational properties of molecules of poly(N,N-diallyl-N,N-dimethylammonium chloride) and N,N-diallyl-N,N-dimethylammonium chloride-maleic acid copolymers of different compositions in solutions with various ionic-strength and pH values, as well as of the polyelectrolyte complex based on the copolymer with dodecyl sulfate anions in chloroform, are studied. For poly(N,N-diallyl-N,N-dimethylammonium chloride) molecules in a 1 M NaCl solution, the Kuhn segment length and the hydrodynamic diameter of the chain are estimated as A = 3.9 nm and d = 0.48 nm, respectively. In acidic solutions with pH 3.5, the copolymers demonstrate behavior typical for polyelectrolytes. In an alkaline solution with pH 13, when 1 M NaCl is added to the solution of the copolymer containing 29 mol % maleic acid units, there is an antipolyelectrolyte effect that manifests itself as an increase in the intrinsic viscosity of the copolymer and in the hydrodynamic radius of its molecules. It is found that an increase in the fraction of maleic acid units in the copolymer from 12 to 42 mol % brings about a reduction in the equilibrium rigidity of its macromolecules from 4.1 to 2.2 nm. The equilibrium rigidity of polyelectrolyte-complex molecules is higher than that of initial copolymer molecules owing to steric interactions arising between the aliphatic chains of dodecyl sulfate anions. In an electric field, the molecules of the complex are oriented owing to the induced dipole moment resulting from the displacement of dodecyl sulfate anions along the chain contour.     

Degradation processes in the cellulose/<Emphasis Type="Italic">N</Emphasis>-methylmorpholine-<Emphasis Type="Italic">N</Emphasis>-oxide system studied by HPLC and ESR. Radical formation/recombination kinetics under UV photolysis at 77 K

Degradation processes of N-methylmorpholine-N-oxide monohydrate (NMMO), cellulose and cellulose/NMMO solutions were studied by high performance liquid chromatography (HPLC) and electron spin resonance (ESR) spectroscopy. Kinetics of radical accumulation processes under UV (λ = 248 nm) excimer laser flash photolysis was investigated by ESR at 77 K. Beside radical products of cellulose generated and stabilized at low temperature, radicals in NMMO and cellulose/NMMO solutions were studied for the first time in those systems and attributed to nitroxide type radicals ∼CH₂–NO^•–CH₂∼ and/or ∼CH₂–NO^•–CH₃∼ at the first and methyl ^•CH₃ and formyl ^•CHO radicals at the second step of the photo-induced reaction. Kinetic study of radicals revealed that formation and recombination rates of radical reaction depend on cellulose concentration in cellulose/NMMO solutions and additional ingredients, e.g., Fe(II) and propyl gallate. HPLC measurements showed that the concentrations of ring degradation products, e.g., aminoethanol and acetaldehyde, are determined by the composition of the cellulose/NMMO solution. Results based on HPLC are mainly maintained by ESR that supports the assumption concerning a radical initiated ring-opening of NMMO.     

Solutions of mixtures of cellulose and synthetic polymers in <Emphasis Type="Italic">N</Emphasis>-methylmorpholine-<Emphasis Type="Italic">N</Emphasis>-oxide

Phase state and morphological features of solutions of cellulose blends with rigid-chain thermotropic LC copolyesters and isotropic poly(m-phenyleneisophthalamide) in the highly polar donor solvent N-methylmorpholine-N-oxide are studied by DSC and polarization microscopy. The ternary phase diagram for the cellulose-copolyesters-N-methylmorpholine-N-oxide system is constructed. Rheological characteristics of the prepared solutions are studied using capillary and rotary rheometers under the regimes of continuous and periodic shear deformation. Rheological characteristics of cellulose solutions with copolyesters in N-methylmorpholine-N-oxide with their different phase states are shown to change in accordance with the traditional mechanism of flow for solutions with high specific interactions between their components. However, the character of the rheological behavior of mixtures of cellulose with poly(m-phenyleneisophthalamide) in N-methylmorpholine-N-oxide primarily stems from structural-morphological transformations in solutions taking place upon deformation.     

Grafting of poly-<Emphasis Type="Italic">N</Emphasis>-methacryloylaminodeoxyglucose on poly-<Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone

A graft copolymer simulating glycoprotein was prepared by reaction of poly-N-methacryloylaminodeoxyglucose containing terminal amino group with a copolymer of N-vinylpyrrolidone and acrylic acid N-hydroxysuccinimide ester.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 8, 2004, pp. 1356–1359.Original Russian Text Copyright © 2004 by Nazarova, Pavlov, Kever, Afanaseva, Panarin.     

Solutions of cellulose and its blends with synthetic polymers in <Emphasis Type="Italic">N</Emphasis>-methylmorpholine-<Emphasis Type="Italic">N</Emphasis>-oxide: Preparation,phase state,structure, and properties

Highly concentrated solutions of cellulose and solutions of cellulose blends with synthetic polymers are prepared via the solid-phase dissolution of cellulose in N-methylmorpholine-N-oxide. The phase state and morphological features of these solutions are studied via DSC and polarization microscopy, and their rheological behavior is considered. Evolution in the structure of cellulose in these systems is investigated at all stages during spinning of oriented fibers from solutions. It is first shown that the addition of synthetic polymers to cellulose makes it possible to control processes of cellulose structuring; to stop them at the stage of mesophase formation; and, thus, to avoid further perfection of the structure and formation of the crystalline phase of cellulose.     

<Emphasis Type="Italic">Z</Emphasis>-and <Emphasis Type="Italic">E</Emphasis>-conformers of <Emphasis Type="Italic">N</Emphasis>-chloroacetylcytisine

N-Chloroacetylcytisine was synthesized by acylation of (–)-cytisine. Stable Z- and E-conformers with respect to rotational isomerism around the N-12–CO bond were found in PMR spectra at room temperature. The point at which PMR resonances of the Z- and E-conformers coalesced upon heating was measured. The transition barrier between the conformers was estimated.     

Mass-spectra and molecular structure of <Emphasis Type="Italic">O</Emphasis>-alkyl <Emphasis Type="Italic">N,N</Emphasis>-dialkylamidocyanophosphates

The electron impact mass spectra were recorded and the key directions of fragmentation of the highly toxic O-alkyl N,N-dialkylamidocyanophosphates were identified. The sets of characteristic ions for the 10 subgroups of the main group of this class were determined. Based on the values of the mass numbers and peak intensities of characteristic ions generalized spectral images for each of the 10 studied subgroups of this class were simulated. A new method of group identification of O-alkyl N,N-dialkylamidocyanophosphates was developed.     

Copolymer of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride with maleic acid as drug carrier

A copolymer of N,N-diallyl-N,N-dimethylammonium chloride with maleic acid of constant composition was prepared under the conditions of radical initiation. The possibility of the functionalization of the copolymer with drugs containing amino groups by polymer-analogous transformations was examined. Conditions were found for preparing conjugates of the copolymer with isoniazid. The structures and the quantitative compositions of the conjugates were determined by ¹³С NMR spectroscopy, and the possibility of preparing conjugates with controlled drug content was demonstrated.     

Synthesis of amphiphilic diblock copolymers poly[2-(<Emphasis Type="Italic">N</Emphasis>, <Emphasis Type="Italic">N</Emphasis>-dimethylamino)ethyl methacrylate]-<Emphasis Type="Italic">b</Emphasis>-poly(stearyl methacrylate) and their self-assembly in mixed solvent

Amphiphilic diblock copolymers consisting of 2-(N, N-dimethylamino)ethyl methacrylate (DMAEMA, abbreviated as DMA) and stearyl methacrylate (SMA) with different degrees of polymerization and compositions were prepared by reversible addition–fragmentation chain transfer (RAFT) copolymerization. The composition and chemical structures of (co)polymers were confirmed by the measurements of ¹H NMR spectroscopy and gel permeation chromatography (GPC). The self-aggregating structures of amphiphilic diblock copolymers with the concentration of 0.1~0.3 wt.% in THF/water mixed solvent was investigated by transmission electron microscopy (TEM) and dynamic light scattering (DLS). It was found that both the morphologies and aggregating particle size resulted from the amphiphilic diblock copolymers depended on the variation of pH values, the lengths of the hydrophobic PSMA chains, and the weight ratio of THF/water mixed solvent.     

Synthesis of <Emphasis Type="Italic">N,N</Emphasis>-disubstituted (<Emphasis Type="Italic">Z</Emphasis>)-<Emphasis Type="Italic">O</Emphasis>-methylnicotinamide oximes

A number of (Z)-N,N-dialkyl- and (Z)-N-acyl-N-alkyl-O-methylnicotinamide oximes was synthesized. Their configuration was confirmed by the NOESY experiment. Evaluation of fungicidal activity of compounds obtained was performed.     

Pathways of decomposition of <Emphasis Type="Italic">N</Emphasis>-cyclopropyl <Emphasis Type="Italic">N</Emphasis> nitrosoureas in methanol

Decomposition of a series of N-cyclopropyl-N-nitrosoureas (CNU) in CD₃OD was studied. These decompose much more rapidly than N-methyl-N-nitrosourea, one of the decomposition pathways being denitrosation, which is atypical of alkylnitrosoureas under the reaction conditions used. The nature of substituents in the cyclopropane ring has a great effect on the stability of CNU and the product ratio. In the presence of H₂ SO₄, decomposition occurs much more rapidly. Possible pathways of the formation of the major decomposition products of CNU are proposed based on the experimental data.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 359–370, February, 2005.     

Effect of glycine on the surface activity and micellar properties of <Emphasis Type="Italic">N</Emphasis>-decanoyl-<Emphasis Type="Italic">N</Emphasis>-methylglucamide

Surface activity, micelle formation and structure of N-decanoyl-N-methylglucamide in presence of increasing glycine concentrations have been investigated. Changes in the critical micelle concentration of the surfactant with the addition of the amino acid were examined by both surface tension and pyrene 1:3 ratio methods. The observed reduction in the critical micelle concentration was attributed to the structure making action of the additive. Micelle structure parameters were obtained as a function of the glycine concentration by using light scattering and fluorescence-quenching measurements. As regard to the effect of glycine of the micelle size, it was found that both the hydrodynamic radius and the micellar aggregation number increased with the glycine concentration. However, the observed micellar growth seems to be mainly determined by the increase in the aggregation number rather than by changes in the amount of water specifically associated to the micelle. This fact is also supported by the observed trend in the micellar partial specific volume as estimated by complementary density measurements.     

C-amidoalkylation of pyrroles with <Emphasis Type="Italic">N</Emphasis>-trifluoromethylsulfonyl and <Emphasis Type="Italic">N</Emphasis>-arylsulfonyl polychloroaldehyde imines

N-(Trifluoromethylsulfonyl) and N-arylsulfonyl polychloroacetaldehyde imines reacted with pyrrole, 1-alkyl-, 1-benzyl-, and 1-(4-nitrophenyl)-substituted pyrroles, and bis-pyrroles to give the corresponding 2-[1-(sulfonylamino)polychloroethyl]-1H-pyrroles or mixtures of 2- and 3-[1-(sulfonylamino)polychloroethyl]-1H-pyrroles, depending on the nature of the Schiff base and substituent on the pyrrole nitrogen atom and reaction conditions. The first synthesis of 2,5-disubstituted NH-pyrrole by reaction of pyrrole with Schiff bases was described.     

Molecular structure of <Emphasis Type="Italic">N</Emphasis>-(<Emphasis Type="Italic">o</Emphasis>-and <Emphasis Type="Italic">p</Emphasis>-hydroxybenzyl)cytisine

The molecular structures of N-(o-and p-hydroxybenzyl)cytisine were investigated by NMR spectroscopy, x-ray structure analysis, and molecular modeling. It was found that NMR resonances of the OH and aromatic protons in N-(o-hydroxybenzyl)cytisine were doubled because of the presence of two conformers in solution. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 165–168, March–April, 2008.     

Synthesis and characterization of thermoresponsive poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide-co-<Emphasis Type="Italic">N</Emphasis>-hydroxymethylacrylamide-co-2-hydroxyethyl methacrylate) hydrogels

Thermoresponsive hydrogels based on N-isopropylacrylamide, N-hydroxymethylacrylamide, and 2-hydroxyethyl methacrylate, poly(NIPAM–co-NHMAAm–co-HEMA), have been synthesized and their swelling—deswelling behavior studied as a function of NIPAM concentration, NIPAM/NHMAAm and NIPAM/HEMA mole ratio, and total monomer concentration. Copolymers varying in composition have been obtained by redox copolymerization of these three monomers. Temperature has been changed in the ranges from 4 to 70 °C at fixed pH and total ionic strength. Equilibrium swelling ratio, dynamic swelling ratio, and dynamic deswelling ratio were evaluated for all hydrogel systems. The equilibrium swelling ratios of the copolymeric gels decrease with increasing NHMAAm and HEMA content. The formation of the intermolecular hydrogen bonding between hydroxyl and amido groups decreases the hydrophilic group numbers of the gel and the affinity of the gel towards water decreases. The copolymer gels also showed rapid volume transitions with time. The time required for equilibrium shrinking increased with increasing NHMAAm and HEMA content in the gel.