Cytotoxicity and fluorescence studies of silica-coated CdSe quantum dots for bioimaging applications

The toxicological effects of silica-coated CdSe quantum dots (QDs) were investigated systematically on human cervical cancer cell line. Trioctylphosphine oxide capped CdSe QDs were synthesized and rendered water soluble by overcoating with silica, using aminopropyl silane as silica precursor. The cytotoxicity studies were conducted by exposing cells to freshly synthesized QDs as a function of time (0–72 h) and concentration up to micromolar level by Lactate dehydrogenase assay, MTT [3-(4,5-Dimethylthiazol-2-yl)-2,5-Diphenyltetrazolium Bromide] assay, Neutral red cell viability assay, Trypan blue dye exclusion method and morphological examination of cells using phase contrast microscope. The in vitro analysis results showed that the silica-coated CdSe QDs were nontoxic even at higher loadings. Subsequently the in vivo fluorescence was also demonstrated by intravenous administration of the QDs in Swiss albino mice. The fluorescence images in the cryosections of tissues depicted strong luminescence property of silica-coated QDs under biological conditions. These results confirmed the role of these luminescent materials in biological labeling and imaging applications.     

Silica-coated quantum dots fluorescent spheres synthesized using a quaternary ‘water-in-oil’ microemulsion system

Nanoscale and microscale silica spheres embedded with multiple CdSe quantum dots (QDs, having average diameters of about 2.4 and 5.0 nm, respectively.) were synthesized by using a quaternary ‘water-in-oil’ microemulsion. Comparing the uncoated QDs, the quantum yields (QYs) of the silica-coated QD spheres were enhanced when the QD cores were synthesized using mercaptoacetic acid (MA) as a stabilizer, while the QYs were dramatically decreased when the cores were synthesized using citric acid (CA) as a stabilizer. The enhanced QYs could be further improved by heating the silica-coated QDs in aqueous solution. Although the QYs of the silica-coated QDs were not high, these spheres emitted bright fluorescence. The silica shells contained numerous micropores (∼0.58–0.91 nm), and small amounts of toxic ions (such as Cd²⁺) could be released from the silica spheres. However, the release rate of toxic ions from the silica spheres was significantly reduced compared with that of the uncoated QDs.     

Improving colloidal properties of quantum dots with combined silica and polymer coatings for in vitro immuofluorenscence assay

Semiconductor quantum dots (QDs) are promising fluorescence probes for immuofluorescence assay in the biological applications. However, water solubilization and non-specific binding are two critical issues to be addressed for the practical uses. Here, we reported a new type of QDs with combined silica and polymer coating. QDs with excellent colloidal properties were prepared via carboxylation of the amino groups on the surface of silica-coated QDs by reacting with multi-carboxyl poly (acrylic acid) (PAA). Hydrodynamic size of PAA-functionalized silica-coated QDs was around 40 nm. They were highly fluorescent (about 47.8% quantum yield). No precipitate of QDs was observed after 3 month storage at 4 °C. When cancer cells (HeLa) were used, the functionalized QDs exhibited little or no non-specific cellular binding. The results from in vitro experiments indicated that PAA-functionalized silica-coated QDs-antibody bioconjugates had excellent antigen-capture ability and exhibited little or no non-specific binding to polystyrene spheres which were used to immobilize the antigen for immuoflurescence assay. The PAA-functionalized silica-coated QDs with improved colloidal properties could serve as excellent alternative fluorescent probes for biodetection.     

PEG Coated Biocompatible Cadmium Chalcogenide Quantum Dots for Targeted Imaging of Cancer Cells

Cancer stands as a leading cause of mortality worldwide and diagnostics of cancer still faces drawbacks. Optical imaging of cancer would allow early diagnosis, evaluation of disease progression and therapy efficiency. To that aim, we have developed highly biocompatible PEG functionalized cadmium chalcogenide based three differently luminescent quantum dots (QDs) (CdS, CdSe and CdTe). Folate targeting scheme was utilized for targeting cancer cell line, MCF-7. We demonstrate the biocompatibility, specificity and efficiency of our nanotool in detection of cancer cells sparing normal cell lines with retained fluorescence of functionalized QDs as parental counterpart. This is the first time report of utilizing three differently fluorescent QDs and we have detailed about the internalization of these materials and time dependent saturation of targeting schemes. We present here the success of utilizing our biocompatible imaging tool for early diagnosis of cancer.     

Encapsulation of highly confined CdSe quantum dots for defect free luminescence and improved stability

This is the first report on the generation of trap states and their effective elimination in highly confined CdSe quantum dots in order to obtain enhanced and stable optical properties prepared by aqueous route. Surface plays an important role in optical properties of quantum dots (QDs) and surface modification of quantum dots can improve optical properties. In present work luminescent CdSe QDs were prepared using 2-Mercaptoethanol (2-ME) as stabilizing agent and encapsulated by polymer. Different concentrations of 2-ME were used to tune the emission spectra with respect to their reduced size. Addition of 2-ME to CdSe QDs enhances the trap emission and quenching band edge emission due to (i) increased surface to volume ratio and; (ii) presence of high concentration of sulfide ions as confirmed from EDX analysis as sulfide ions possesses the hole scavenging characteristics. Polymer encapsulation of QDs was carried out to make them stable and to improve their optical properties. Even though there are previous reports addressing the improved optical properties by polymer encapsulation and silica encapsulation but experimentally it has not been reported yet experimentally. In this work we have synthesized and characterized water soluble polymer encapsulated QDs and proved the facts experimentally. Photoluminescence spectroscopy clearly reveals the role of polymer encapsulation in boosting the optical properties of CdSe QDs. FTIR spectra validate the presence of biocompatible functional groups on CdSe4/PEG (Polymer encapsulated QDs).     

谷胱甘肽包被的CdSe/CdS量子点的直接水相制备及其对人血淋巴细胞的标记成像

首次用谷胱甘肽(GSH)作为稳定剂,在水溶液中制备了稳定地发射绿色荧光和橙色荧光的两种 CdSe/CdS核/壳结构的纳米量子点。用紫外-可见分光光度和荧光光谱方法研究了CdSe/CdS量子点的发光特性。透射电镜(TEM)结果表明CdSe/CdS量子点近似球形,在水中分散性良好,比CdSe量子点具有更优异的发光特性,发射光谱和吸收光谱都有红移现象。将CdSe/CdS量子点与鼠抗人CD3抗体连接,制备了水溶性CdSe/CdS-CD3复合物探针,对人血淋巴细胞进行标记和成像。结果表明用该探针对人血淋巴细胞成像清晰,其荧光在30 min的连续蓝光激发下无明显衰退,而FITC荧光在20 min内基本完全猝灭。     

A Dual-Functional Ferroferric Oxide/Quantum Dots Theranostic Nanoplatform for Fluorescent Labeling and Photothermal Therapy

A biocompatible, nontoxic theranostic nanoplatform consisting of mesoporous silica-coated ferroferric oxide (Fe₃O₄) and Mn-doped ZnS-ZnS quantum dots (QDs) is synthesized via a layer-by-layer method. Transmission electron microscopy, X-ray diffractometer, magnetometry, and fluorophotometer are employed to characterize the nanoplatform. The nanoplatform exhibits excellent superparamagnetic, fluorescent, and light absorption properties. The template method is introduced to form a mesoporous silica structure on the nanoplatform, lowering the mass of the nanoplatform and effectively promoting the absorption efficiency of the incident light compared with the traditional silica layer. In addition, after endocytosis of the nanoplatform, cancer cells are easily detected under a fluorescence microscope because of the excellent fluorescent behavior of QDs. Moreover, in vitro experiments confirm that nanoplatform possesses perfect photothermal effect to destroy tumor cells under laser irradiation. Therefore, ferroferric oxide/QDs nanoplatforms, combined with the functions of fluorescent labeling and photothermal therapy for cancer cells, are expected to be a promising biopotential material in the field of diagnosis and treatment.     

Phase transfer of agglomerated nanoparticles: deagglomeration by adsorbing grafted molecules and colloidal stability in polymer solutions

We aimed to develop liposomes for loading both cisplatin and quantum dots (QDs) for both drug delivery and bioimaging. The resultant quantum-dot-liposomes (QDLs) with cisplatin were characterized using dynamic light scattering, transmission electron microscopy (TEM), encapsulation efficiencies, and fluorescence intensity. QDLs composed of CdSe or CdSe/ZnS QDs represented a size of about 100?nm. The QDLs were prepared at a high QD loading efficiency of nearly 100?%. Most QDs were located within the liposomal bilayers as evidenced by TEM. Slow and sustained cisplatin release from QDLs was achieved. The cellular uptake of QDLs demonstrated effective internalization and significant fluorescence in melanoma cells. The signal derived from QDLs could be observed by different wavelength settings. The cisplatin-containing QDLs revealed higher cytotoxic activity compared to an equal dose of free cisplatin. CdSe/ZnS QDLs were intravenously administered to mice, and the biodistribution was observed with an in vivo imaging system. Significant fluorescence signal and cisplatin accumulation were detected in the brain and skin, as verified by ex vivo imaging and drug distribution. Liposomal inclusion could reduce the reticuloendothelial system uptake of QDs and cisplatin. QDLs evaluated in this study represent a new potential method for theranostic purposes.     

Synthesis,biocompatibility and luminescence properties of quantum dots conjugated with amino acid-functionalized β-cyclodextrin

A series of CdSe and CdSe/CdS quantum dots (QDs) labeled with amino acid-modified β-cyclodextrin (β-CD) was prepared by a simple ultrasonic method. These amino acid-modified β-CD-coated QDs are very soluble and stable in biological buffer. They also have high colloidal stability and strong optical emission properties that are similar to those of untreated tri-n-octylphosphine oxide (TOPO)-coated QDs. The quantum yields (QYs) of these amino acid-modified β-CD-coated CdSe and CdSe/CdS QDs in biological buffer were found to be very high. In particular, the QYs of the positively charged l-His-β-CD-coated CdSe/CdS QDs were as high as 33.5±1.8%. In addition, the fluorescence lifetime of these QDs was also very long in PBS solutions as determined by frequency domain spectroscopy. For example, the lifetime of l-His-β-CD-coated CdSe/CdS QDs was 8.6 ns. The in vitro cytotoxicity of these QDs in ECV-304, SH-SY5Y and HeLa cells was found to be lower. l-His-β-CD-coated CdSe/CdS QDs were the least cytotoxic (IC₅₀ 95.6±3.2 mg mL^?1 in ECV-304 cells after 48 h). The flow cytometry results show that the positively charged amino acid led to a considerable increase in biocompatibility of QDs. This may be attributed to the presence of an amino acid-modified β-CD outer layer, which enhanced the biocompatibility.     

The Influence of Surface Trapping and Dark States on the Fluorescence Emission Efficiency and Lifetime of CdSe and CdSe/ZnS Quantum Dots

To investigate the influence of surface trapping and dark states on CdSe and CdSe/ZnS quantum dots (QDs), we studied the absorption, fluorescence intensity and lifetime by using one-and two-photon excitation, respectively. Experimental results show that both one- and two-photon fluorescence emission efficiencies of the QDs enhance greatly and the lifetime increase after capping CdSe with ZnS due to the effective surface passivation. The lifetime of one-photon fluorescence of CdSe and CdSe/ZnS QDs increase with increasing emission wavelength in a supralinear way, which is attributed to the energy transfer of dark excitons. On the contrary, the lifetime of two-photon fluorescence of bare and core-shell QDs decrease with increasing emission wavelength, and this indicates that the surface trapping is the dominant decay mechanism in this case.     

Demonstration of a nanoparticle-based optical diode

We present the operation of an optical device that exhibits diodelike properties based on two adjacent layers of quantum dots (QDs) encased in a fiber-optic jacket. The possibility of a multilayered device is also discussed. A significant change in the emission spectrum of CdSe/ZnS core-shell QDs was observed when excited by the input laser and the fluorescence of other CdSe/ZnS core-shell QDs. The output of the diode can be taken to be either the incoming laser wavelength of light similar to a conventional diode, or the output may be considered to be one of the QD fluorescence wavelengths. Current work has applications in biological fluorescence monitors and sensors as well as in telecommunications applications.     

复合荧光CdSe量子点-脂质体的制备与表征

通过脂质体方法成功地将三辛基氧化膦(TOPO)包覆的CdSe发光量子点从非极性有机溶剂转移到生物相容性的水溶液中.分别通过透射电镜(TEM)、荧光Mapping图像,以及光致发光(PL)光谱进行表征.TEM照片显示制备的CdSe核量子点为球形,具有良好的单分散特性,平均粒径约为3nm.CdSe-脂质体复合体的平均尺寸大约20nm,TEM清楚地显示了CdSe量子点被诱捕在脂质体中.荧光Mapping显示了CdSe-脂质体复合体的发光强度分布.脂质体方法转移TOPO包覆的CdSe量子点,借助了磷脂的双分子链与CdSe表面的TOPO配体之间的疏水相互作用,在CdSe的第一配体层外部形成第二配体层,保留了CdSe的存在环境,光致发光光谱表明,量子点-脂质复合体基本保持了CdSe核量子点的发射效率.     

脂溶性CdSe/ZnS量子点脂质体复合物的制备及表征

在油相中成功合成了脂溶性CdSe/ZnS核壳量子点纳米粒,粒径平均为4.5 nm,量子产率达29%,发射波长为540 nm。通过薄膜分散法,以蛋黄卵磷脂、胆固醇为膜材,将脂溶性的CdSe/ZnS核壳量子点包覆于脂质体磷脂双分子层中,由于磷脂分子的两亲性,使得脂溶性的CdSe/ZnS核壳量子点同时又具有亲水性。通过透射电镜对脂质体形态进行了表征,倒置荧光显微镜证实了发光CdSe/ZnS核壳量子点成功包埋于脂质体双分子层中,包裹的发光CdSe/ZnS核壳量子点具有更稳定的发光及抗光漂白性质。     

Photostability comparison of CdTe and CdSe/CdS/ZnS quantum dots in living cells under single and two-photon excitations

The photostability is an outstanding feature of quantum dots (QDs) used as fluorescence probes in biological staining and cell imaging. To find out the related factors in the QD photostability, the photobleaching of naked CdTe QDs and BSA coated CdSe/CdS/ZnS QDs in human hepatocellular carcinoma (QGY) cells and human nasopharynx carcinoma (KB) cells were studied under single photon excitation (SPE) and two-photon excitation (TPE). In these two cell lines the cellular QDs were irradiated by a 405 nm continuous wave laser for SPE or an 800 nm femto-second (fs) laser for TPE. The QD photobleaching with the irradiation time was found to fit a biexponential decay. The fast decay plays a dominant role in the bleaching course and thus can be used as the parameter to quantitatively evaluate the QD photostability. The TPE decreased the QD photobleaching as compared to SPE. The BSA coated core/shell QDs had improved the photostability up to 4-5 times than the naked QDs due to the shielding effect of the QD shell. Therefore, it is better to use core/shell structured QDs as the fluorescence probe combining with a TPE manner for those long-term monitoring studies.     

微腔中CdSe量子点荧光增强效应

文章主要研究了CdSe量子点微腔结构,微腔结构包括上下分布式布拉格反射镜(DBR),中间的有源层为溶解在聚甲基丙烯酸甲酯(PMMA)中的CdSe胶体量子点.采用传递矩阵法模拟微腔的反射光谱,对实验测试曲线进行较好的拟合.通过测试微腔结构的光致荧光(PL)光谱,其半峰宽(FWHM)由未加入微腔的CdSe量子点样品的27.9 nm,减小到微腔结构的7.5 nm,在微腔中的量子点,由于腔模式的出现,其发光谱的品质因数增加了3.6倍,达到了荧光增强的效果. 关键词： CdSe量子点 微腔效应 荧光增强     

基于氢化物发生技术的CdSe量子点水相制备新方法研究及其用于银的高灵敏传感分析

报道了一种新型的利用氢化物发生技术水相合成高质量硒化镉量子点(CdSe QDs)的方法。通过将硼氢化钾与亚硒酸混合产生H_2Se气体,并将其可调控地引入到含镉溶液中,从而制备出化学性质稳定、荧光性能良好的CdSe量子点。所合成的量子点被成功应用于环境水样及细胞样品中痕量银的分析,分析检出限为0.005μg·mL~(-1),相对标准偏差小于2.7%(n=7),分析结果令人满意。该方法具有操作简单、稳定性好、灵敏度高、绿色环保等优点。     

CdSe/ZnSe/ZnS多壳层结构量子点的制备与表征

展示了一种简捷的多壳层量子点合成路线。在含有过量Se源的CdSe体系中直接注入Zn源,"一步法"合成了CdSe/ZnSe量子点;进一步以CdSe/ZnSe为"核",表面外延生长ZnS壳层制备了核/壳/壳结构CdSe/ZnSe/ZnS量子点。相对于以往报道的多壳层结构量子点的制备方法,该方法通过减少壳层的生长步骤有效地简化了实验操作,缩短了实验周期,同时减少对原料的损耗。对量子点进行高温退火处理,能够大幅提高CdSe/ZnSe/ZnS量子点的发光量子产率。透射电镜、XRD以及光谱研究表明:所制备的量子点接近球形,核与壳层纳米晶均为闪锌矿结构,最终获得的CdSe/ZnSe/ZnS量子点的光致发光量子产率达到53％。为了实现量子点的表面生物功能化,通过巯基酸进行了表面配体交换修饰,使量子点表面具有水溶性的羧基功能团,并且能够维持较高的光致发光量子产率。     

胶体CdSe量子点的色度学特性研究

使用化学胶体法合成了CdSe量子点，研究了样品的荧光量子产率，发现随CdSe量子点粒径的增大，荧光量子产率存在先增大后减小的现象.研究了CdSe量子点的色度学特性，通过对不同尺寸、不同粒径分布范围的CdSe量子点色度坐标的计算，讨论了粒径分布范围对其荧光颜色饱和度的影响，解释了为何难以获得高颜色饱和度的绿光量子点.利用红、蓝两种不同尺寸的量子点配制出白光样品，提出了估计配色后样品色度坐标的经验公式，结果显示白光样品色度坐标的实验值与经验公式估计值基本一致.     

Steady State and Time Resolved Spectroscopic Study of CdSe and CdSe/ZnS QDs:FRET Approach

This article highlights some physical studies on the relaxation dynamics and Förster resonance energy transfer (FRET) of semiconductor quantum dots (QDs) to proximal dye molecule and the way these phenomena change with core to core-shell QD is discussed. Efforts to understand the optical and carrier relaxation dynamics of CdSe and CdSe/ZnS QDs are made by using absorption, steady-state fluorescence and time-resolved fluorescence (TCSPC) techniques. Steady-state as well as time-resolved fluorescence measurements were employed to evaluate the QD PL quenching induced by the proximal Rhodamine 101 dye molecule and to examine the influence of deep trap states on energy transfer efficiency. The FRET parameters such as spectral overlap, Förster distance, intermolecular distance for each donor-acceptor pair are determined and variation of these parameters from core to core-shell QD is discussed.     

Enhanced photoluminescence of CdSe quantum dots by the coupling of Ag nanocube and Ag film

The coupling of local surface plasmon(LSP) of nanoparticle and surface plasmon(SP) mode produced by metal film can lead to the enhanced electromagnetic field, which has an important application in enhancing the fluorescence of quantum dots(QDs). Herein, the Ag nanocube and Ag film are used to enhance the fluorescence of CdSe QDs. The enhancement is found to relate to the sizes of the Ag nanocube and the thickness of the Ag film. Moreover, we also present the fluorescence enhancement caused by only SP. The result shows that the coupling between metal nanoparticles and metal film can realize larger field enhancement. Numerical simulation verifies that a nanocube can localize a strong electric field around its corner. All the results indicate that the fluorescence of QDs can be efficiently improved by optimizing the parameters of Ag film and Ag cubes.