Migration of plasticizers from plasticized polyvinyl chloride films

The migration of plasticizers [EDOS, di(2-ethyl hexyl) o-phthalate, di-n-butyl o-phthalate] from unfilled and chalk-filled polyvinyl chloride films plasticized with individual and binary plasticizers was studied by gravimetric analysis and IR spectroscopy. The intermolecular interaction of components in model systems was studied by IR spectroscopy and isothermal calorimetry.     

Determination of Trace Leaching Phthalate Esters in Water and Urine from Plastic Containers by Solid-Phase Microextraction and Gas Chromatography-Mass Spectrometry

A sensitive method has been developed for determination of trace leaching phthalate esters (PAEs) in water and urine from plastic containers by direct immersion solid-phase microextraction (DI-SPME) coupled to gas chromatography-mass spectrometry (GC-MS). The limits of detection (LODs) for PAEs in water and urine had values between 0.2–8 ng L^?1 and 4–70 ng L^?1, respectively. The proposed method was successfully used for quantification of trace PAEs in water in microwavable polypropylene containers heated by microwave irradiation and in the urine of patients treated with a glucose injection using polyvinyl chloride tubing.     

Application of wavelet transforms and an approximate deconvolution method for the resolution of noisy overlapped peaks in DNA capillary electrophoresis

A new procedure for resolving noisy overlapped peaks in DNA separations by capillary electrophoresis (CE) is developed. The procedure combines both a wavelet-based denoising method that effectively denoises the signal and a novel approximate deconvolution technique that resolves the fragment peaks and improves the ability to separate highly overlapped peaks early in the electrophoresis process. Different kinds of overlapped peaks with and without noise simulated by computer as well as some DNA experimental electropherograms were submitted to the new procedure. A second order differential operator with variable coefficients is applied to the entire electrophoresis signal at any given time and approximate deconvolutions of the individual Gaussian peaks are performed. The operator incorporates the effect of the superposition and gives exact annihilation in the neighborhood of each peak. Overlapped peaks with a resolution higher than 0.46 can be resolved directly. Also, the method can determine the peak components of signals with a signal to noise ratio higher than 1.4     

GC-MS/MS用于微波条件下PVC塑料中增塑剂向橄榄油迁移行为的研究

采用GC-MS/MS法研究了微波条件下PVC塑料中3种增塑剂(邻苯二甲酸二异丁酯(DIBP)、邻苯二甲酸二(2-乙基)己酯(DEHP)和己二酸二(2-乙基)己酯(DEHA))在橄榄油中的迁移规律,考察了微波加热时间和微波功率对增塑剂迁移的影响,并与常规加热条件下的迁移进行比较。结果表明,3种增塑剂在橄榄油中的迁移量随微波功率和加热时间的增加而增大,且微波加热条件下的迁移量显著高于常规加热方式。     

Telluronium salt chemistry: Some fluorides and carboxylates

Ph₃TeF is ionic and no evidence is obtained for a covalent form in solvents of relatively low polarity. By contrast significant covalent interaction is seen for Ph₂(CH₃)Te(OOCR)(R=Ph, o-CH₃O·C₆H₄-, m-NO₂·C₆H₄). Factors influencing the formation and stability of covalent forms of telluronium “salts” are discussed. Phenyl(methyl)telluronium-ortho-phthalate is shown to be a monomer in chloroform solution. The structure of the compound is discussed in relation to NMR and IR data and against the background of previous literature reports of both dimeric and monomeric diorganotellurium-ortho-phthalates.     

Simultaneous analysis of synthetic cannabinoids in the materials seized during drug trafficking using GC-MS

A rapid and simple gas chromatography–mass spectrometry (GC-MS) method was developed and validated to identify and quantify synthetic cannabinoids in the materials seized during drug trafficking. Accuracy and reproducibility of the method were improved by using deuterated JWH-018 and JWH-073 as internal standards. Validation results of the GC-MS method showed that it was suitable for simultaneous qualitative and quantitative analyses of synthetic cannabinoids, and we analyzed synthetic cannabinoids in seized materials using the validated GC-MS method. As a result of the analysis, ten species of synthetic cannabinoids were identified in dried leaves (n?=?40), bulk powders (n?=?6), and tablets (n?=?14) seized in Korea during 2009–2012, as a single ingredient or as a mixture with other active co-ingredients. JWH-018 and JWH-073 were the most frequently identified compounds in the seized materials. Synthetic cannabinoids in the dried leaves showed broad concentration ranges, which may cause unexpected toxicity to abusers. The bulk powders were considered as raw materials used to prepare legal highs, and they contained single ingredient of JWH-073, JWH-019, or JWH-250 with the purity over 70 %. In contrast, JWH-018 and JWH-073 contents in the tablets were 7.1–13.8 and 3.0–10.2 mg/g, respectively. Relatively low contents in the tablets suggest that the synthetic cannabinoids may have been added to the tablets as supplements to other active co-ingredients.     

Graphene/poly(ortho-phenylenediamine) nanocomposite material for electrochemical supercapacitor

Reduced graphene oxide was synthesized by simple chemical processing of graphite. Electron microscopy investigations of synthesized graphene showed slightly folded transparent sheets with a few square micrometers dimension. Poly(ortho-phenylenediamine)/graphene/Pt electrode was electrochemically fabricated in a 2.0-M H₂SO₄ solution by means of multiple potential cycling. Due to the catalytic effect of graphene on the oxidative electropolymerization of ortho-phenylenediamine, the ortho-phenylenediamine/graphene (PoPD/GR) nanocomposite showed greatly enhanced electrical properties and excellent capacitive behavior. Electrochemical impedance spectroscopy, galvanostatic charge/discharge curves, and voltammetric investigations revealed that PoPD/GR nanocomposite represented good capacitive behavior with a specific capacitance as high as 308.3 F g^?1 at 0.1 A g^?1. It is almost three times higher than that of pure graphene (111.7 F g^?1). In addition, the nanocomposite electrode retained more than 99 % of the initial capacity after 1,500 cycles at a current density of 1 A g^?1.     

Intralaboratory validation of an analytical method for determining the migration of bis(2-ethylhexyl) adipate from packaging to fat foods

Polyvinylchloride (PVC) has been widely used in the packaging industry in the form of flexible films for food packaging. Among the main plasticizers used in flexible PVC films is bis(2-ethylhexyl) adipate, DEHA. Brazilian law provides a specific migration limit for DEHA of 18 mg kg^?1 of food simulant. Although Brazilian Sanitary Surveillance Agency Resolution no. 51 (passed on November 26, 2010) establishes conditions for the migration test, there is a need for intralaboratory validation of the method involved. This paper presents the validation of a method for determining the migration of DEHA from food packaging using fatty food simulant. The DEHA migration test was performed through contact between a 1 dm² PVC film cutout and 100 ml of a food simulant, 2,2,4-trimethylpentane (isooctane), for 48 h at 20 °C. The mass fraction of DEHA in the migration solutions was determined by gas chromatography with a flame ionization detector. The method was validated and determined to be well suited to the intended purpose. The working range was defined as 5–25 mg kg^?1 and was determined to be linear, with no observed lack of fit to the model. There was no matrix effect, and the selectivity of the method was considered adequate. The method showed adequate repeatability, intermediate precision, and robust results for migration temperature and migration time: 20 °C with tolerance limit of ±3 °C and 48 h with tolerance limit of ±30 min, respectively.     

Selective Separation of Oxy-PAH from n-Alkanes and PAH in Complex Organic Mixtures Extracted from Airborne PM2.5

A fast and simple fractionation method was optimized to selectively separate oxy-PAH from polycyclic aromatic hydrocarbons (PAH) and n-alkanes contained in solvent extracted organic matter (SEOM) from atmospheric particles with an aerodynamic diameter ≤2.5 μm (PM_2.5). Samples were collected in Mexico City. Multivariate parameters were adjusted on a standard mixture, and on SEOM spiked with pure standard mixture solutions: type and amount of phase; packing densities; type, proportion and amount of solvents, and elution flow rates were tested under several elution schemes. Cyanopropylsilyl-bonded phase material was the selected stationary phase. The separation method was applied to real samples of SEOM (2.6, 5.6 and 8.5 mg) spiked with n-alkanes, PAH and oxy-PAH. n-Alkanes overlapped with PAH due to an excess of n-alkanes in real samples overloading the capacity of the stationary phase. Oxy-PAH was separated totally from n-alkanes and PAH. Mean recoveries ± confidence intervals (95%) for n-alkanes ranged from 53 ± 17% (n-tetracontane) to 101 ± 11% (n-hexacosane); for PAH from 58 ± 5% (phenanthrene) to 85 ± 9% (benzo[k]fluoranthene); and for oxy-PAH from 68 ± 12% (9,10-dihydrobenzo[a]pyren-7(8H)one) to 108 ± 9% (1,2-benzopyrone). This method is an efficient fractionation procedure to be applied to oxy-PAH, PAH and n-alkanes in complex organic mixtures extracted from PM_2.5.     

Diversity-oriented synthesis of 1,2,3,5-tetrahydrobenzo[e][1,2,4]oxadiazepines and 2,3-dihydro-1H-benzo[e][1,2,4]triazepines by base-induced [4 + 3] annulation reactions

The base-induced formal [4 + 3] annulation reactions of N-(ortho-chloromethyl)aryl amides with nitrones or hydrazonoyl chlorides have been reported. When nitrones are used as the 1,3-dipole, the corresponding reaction afforded a series of 1,2,3,5-tetrahydrobenzo[e][1,2,4]oxadiazepine derivatives. Highly functionalized 2,3-dihydro-1H-benzo[e][1,2,4]triazepine derivatives were also synthesized via an unprecedented tandem aza-Michael addition/rearrangement aromatization between N-(ortho-chloromethyl)aryl amides and hydrazonoyl chlorides.     

Bamboo charcoal as a novel solid-phase microextraction coating material for enrichment and determination of eleven phthalate esters in environmental water samples

This study demonstrates the potential of bamboo charcoal as a novel and inexpensive solid-phase microextraction (SPME) coating material for enrichment and determination of organic pollutants in water samples. Bamboo charcoal was prepared and used as a SPME coating material. Eleven phthalate esters (PAEs) were used as model analytes, and gas chromatography–mass spectrometry was used for separation and detection. Important extraction conditions (ionic strength, stirring rate, and extraction time) and desorption conditions (desorption temperature and time) were systematically investigated and optimized. Linearity of 0.1–100 μg?L^?1 and correlation coefficients of 0.9992–0.9998 were obtained under optimum conditions. Inter-day and intra-day repeatability were 2.15–9.93 % and 1.89–9.85 %, respectively, and fiber-to-fiber reproducibility was 5.42–9.66 %. On the basis of a chromatographic signal-to-baseline noise ratio of three, the limits of detection reached 0.004–0.023 μg?L^?1. Satisfactory results were achieved when the bamboo coating was used for determination of 11 PAEs in real water samples. The experimental results indicate that bamboo charcoal has significant potential as a SPME coating material for rapid enrichment and sensitive determination of organic pollutants in environmental samples.     

Simultaneous Determination of the Active Ingredients in Abelmoschus manihot (L.) Medicus by CZE

A capillary zone electrophoretic method has been developed for the quantitative analysis of four active compounds, quercetin-3-O-robinobioside (LXY3), hyperin (LXY4), isoquercetin (LXY5) and myricetin (LXY7) in A. manihot (L.) Medicus with UV detection at 254 nm. The capillary temperature was kept constant at 25 °C. The effects of buffer composition, pH, and concentration and running voltage on migration were studied systematically. Optimum separation was achieved with 20 mmol L^?1 Borax–NaOH buffer (pH 9.50) at 25 °C and 25 kV. Regression equations revealed good linear relationship between the peak area of each compound and its concentration. All the correlation coefficients were higher than 0.9990. The relative standard deviations of migration time and the peak area were <0.53% and 5.34% (inter-day), and <0.56% and 3.81% (intra-day). The contents of the four compounds in A. manihot (L.) Medicus were successfully determined with satisfactory repeatability and recovery.     

人工神经元网络方法在毛细管电泳和色谱分析中的应用

综述了人工神经元网络方法在毛细管电泳和色谱分析中的应用,内容包括迁移(或保留)行为的预测,分离优化,模式识别及分类,重叠峰定量解析,非线性过程的模型化,峰纯度的判断等。还对人工神经元网络在色谱和毛细管电泳中将来可能的应用进行了探讨。引用文献52篇。     

Ionic liquids: New generation stable plasticizers for poly(vinyl chloride)

Room temperature ionic liquids (ILs), based on ammonium, imidazolium and phosphonium cations, were studied as novel plasticizers for poly(vinyl chloride), PVC. All the ILs tested were able to produce flexible PVC. Upon 20 wt% plasticization, some of the ILs lowered the glass transition temperature (T_g) of PVC more than that done by several traditional plasticizers. They showed good thermodynamic compatibility as well. Several ILs showed better leaching and migration resistance than the traditional plasticizers. This was, in particular, a significant observation considering the ongoing controversy regarding the leaching and migration issues of the commonly-used phthalate plasticizers. High temperature and ultraviolet (UV) ray stability of IL-plasticized PVC samples were also studied.     

Resolution of overlapped chromatograms by means of the kalman filter : Dimensional reduction of error covariance matrices and state estimate vectors

If many samples are successively injected into a high-performance liquid chromatograph at short intervals, then overlapped chromatograms will be obtained. A simplified version of the Kalman-filter algorithm is described for rapid resolution of several such overlapped peaks on small laboratory computers; the dimensionalities of the error covariance matrix Pk and state estimate vector X?k are reduced to far less than the total number of the peaks. Computer simulation shows that at least twenty partially overlapped Gaussian peaks, used as a model of the successive injections can be successfully resolved, with the 4 × 4 matrix Pk and 4-vector X?k. This version is independent of the number of injections and is effective for the resolution of a finite number of peaks in that injection mode. The algorithm of small dimensions is applicable to a wide variety of peak resolution procedures.     

A one-dimensional kalman filter for peak resolution

A one-dimensional Kalman filter algorithm is presented that resolves several overlapped liquid chromatographic peaks without algebraic operations of matrices. The resolving powers or filtering reliability of the algorithm is independent of the number of peaks, but depends on both the peak overlap (resolution value R_s) and the signal-to-noise ratio more significantly than the usual multi-dimensional Kalman filter. The reliability is shown to be similar to that of the multi-dimensional filter for the resolution of overlapped Gaussian peaks with limited R_s and S/N values.     

Signals ratio method combined with wavelet transform: application to resolution of overlapped electrochemical signals

A signals ratio method combined with wavelet transform was proposed for the resolution of a weak voltammetric signal overlapped by other components. The signals ratio method usually suffers from interference from noise and baseline contained in the original signals because these factors cause distortion of the signals ratio. The multiresolution capability of the wavelet transform method was exploited here to simultaneously remove or reduce the noise and background. As a result, a deformation-free signals ratio with good signal-to-noise ratio (SNR) was obtained even for very noisy signals. The properties of the proposed method were compared to other resolution methods. It was demonstrated that the combined signals ratio wavelet transform method was particularly applicable to resolve a minor component in the presence of large amount of other components, suggesting that it can provide improved detection limits and quantified results for minor components. The method was employed for the voltammetric determination of residual chlorine in the presence of N,N-diethyl-p-phenylenediamine (DPD).     

Graphene oxide functionalized magnetic nanoparticles as adsorbents for removal of phthalate esters

We show that magnetic nanoparticles can be functionalized with graphene oxide (GO-MNPs) in two reaction steps, and that such nanoparticles can be used as adsorbents for the removal of phthalate esters (PAEs) from water samples. The GO-MNPs were characterized by scanning electron microscopy, transmission electron microscopy, Fourier-transform infrared spectroscopy, zeta potential, and vibrating sample magnetometer. The impacts of contact time, sample pH, ionic strength and sample volume on the adsorption process were investigated. The maximum adsorption capacity for diethyl phthalate was calculated to be 8.71 mg g^?1 according to the Langmuir adsorption isotherm. The adsorption efficiency was tested by removal of PAEs. More than 99 % of the total quantity of PAEs (0.12 mg L^?1) in 500 mL real water samples can be removed when GO-MNPs (275–330 mg) were used as an adsorbent. In addition, other species (estriol and fluorene) containing benzene rings were also almost completely removed with the PAEs using GO-MNPs, indicating that GO-MNPs are suitable for the removal of the species containing π-electron system through π-π interactions.

Impact of enzymatic and alkaline hydrolysis on CBD concentration in urine

A sensitive and specific analytical method for cannabidiol (CBD) in urine was needed to define urinary CBD pharmacokinetics after controlled CBD administration, and to confirm compliance with CBD medications including Sativex—a cannabis plant extract containing 1:1 ?⁹-tetrahydrocannabinol (THC) and CBD. Non-psychoactive CBD has a wide range of therapeutic applications and may also influence psychotropic smoked cannabis effects. Few methods exist for the quantification of CBD excretion in urine, and no data are available for phase II metabolism of CBD to CBD-glucuronide or CBD-sulfate. We optimized the hydrolysis of CBD-glucuronide and/or -sulfate, and developed and validated a GC-MS method for urinary CBD quantification. Solid-phase extraction isolated and concentrated analytes prior to GC-MS. Method validation included overnight hydrolysis (16 h) at 37 °C with 2,500 units β-glucuronidase from Red Abalone. Calibration curves were fit by linear least squares regression with 1/x ² weighting with linear ranges (r ²?>?0.990) of 2.5–100 ng/mL for non-hydrolyzed CBD and 2.5–500 ng/mL for enzyme-hydrolyzed CBD. Bias was 88.7–105.3 %, imprecision 1.4–6.4 % CV and extraction efficiency 82.5–92.7 % (no hydrolysis) and 34.3–47.0 % (enzyme hydrolysis). Enzyme-hydrolyzed urine specimens exhibited more than a 250-fold CBD concentration increase compared to alkaline and non-hydrolyzed specimens. This method can be applied for urinary CBD quantification and further pharmacokinetics characterization following controlled CBD administration.     

Chemometrics-assisted gas chromatographic-mass spectrometric analysis of volatile components of olive leaf oil

Iranian olive leaf essential oil components were extracted by microwave-assisted hydrodistillation and analyzed using gas chromatography-mass spectrometry. Ninety-seven components were identified by direct similarity searches for olive leaf essential oil. Chemometrics was used to find more components with the help of multivariate curve resolution methods. Eigenvalues-based methods and Malinowski functions were used for chemical rank determination of GC–MS data. Multivariate curve resolution-alternative least squares as an iterative method was used for resolving the overlapped and embedded peaks. With the use of this method the number of 97 components was extended to 127 components. Major constituents in the olive leaf essential oil are 2-decenal-(E) (20.43 %), benzeneacetaldehyde (4.00 %), 2-undecenal (3.71 %) and valencen (3.31 %).