Zinc(II) complexes derived from di-2-pyridyl ketone N-phenyl-3-semicarbazone: Crystal structures and spectral studies

Six zinc(II) complexes, Zn(HL)Br₂ (1), Zn(HL)Cl₂ (2), ZnL(OAc) (3), ZnLN₃ (4), ZnL₂ (5) and ZnL₂ · H₂O (6), have been synthesized and characterized by different physicochemical techniques. Complex 1 is five coordinated and has a distorted square pyramidal geometry. Complexes 5 and 6 are six coordinated and have distorted octahedral geometries. In complexes 1 and 2, the ligand moieties are coordinated in the neutral form (HL), and in the other complexes they are monoanionic (L⁻).     

Structural and spectral studies on manganese(II) complexes of di-2-pyridyl ketone N(4)-methyl and N(4)-ethyl thiosemicarbazones

Four manganese(II) complexes of di-2-pyridyl ketone N(4)-methyl (HDpyMeTsc) and N(4)-ethyl thiosemicarbazones (HDpyETsc) were synthesized and physico-chemically characterized by means of partial elemental analyses, molar conductance measurements, electronic, infrared and EPR spectral studies. The complexes are represented as [Mn(DpyMeTsc)₂] (1), [Mn(HDpyMeTsc)Cl₂] (2), [Mn(HDpyMeTsc)₂](ClO₄)₂ · H₂O (3) and [Mn(DpyETsc)₂] · 2H₂O (4). The crystal structure of [Mn(DpyMeTsc)₂] was established by single crystal X-ray diffraction studies. The compound crystallizes into a monoclinic lattice with P2₁/n space group. Manganese(II) exists in a distorted octahedral geometry in the complex.     

Structural and spectral investigations on some new Ni(II) complexes of di-2-pyridyl ketone N(4)-phenylthiosemicarbazone

Ni(II) complexes (1–5) of di-2-pyridyl ketone N(4)-phenylthiosemicarbazone (HL) have been synthesized and spectrochemically characterized. Elemental analyses revealed a NiL₂ · 2H₂O stoichiometry for compound 1. However, the single crystals isolated revealed a composition NiL₂ · 0.5(H₂O)0.5(DMF). The compound crystallizes into a monoclinic lattice with the space group P2₁/n. Complexes 2, 3 and 4 are observed to show a 1:1:1 ratio of metal:thiosemicarbazone:gegenion, with the general formula NiLX · yH₂O [X = NCS, y = 2 for 2; X = Cl, y = 3 for 3 and X = N₃, y = 4.5 for 4]. Compound 5 is a dimer with a metal:thiosemicarbazone:gegenion ratio of 2:2:1, with the formula [Ni₂L₂(SO₄)] · 4H₂O.     

Self-assembling dicopper(II) complexes of di-2-pyridyl ketone Schiff base ligands derived from S-alkyldithiocarbazates

Condensation of di-2-pyridyl ketone with S-methyldithiocarbazate or S-benzyldithiocarbazate yields potentially bridging ligands of the form Py₂CNNHC(S)SR; Hdpksme (R = Me; the di-2-pyridyl ketone Schiff base of S-methyldithiocarbazate) and Hdpksbz (R = Bz; the di-2-pyridyl ketone Schiff base of S-benzyldithiocarbazate). Complexation of these ligands with Cu(II) in a 1:1 M ratio leads to the formation of dinuclear complexes of the general formula [Cu(NNNS)X]₂ (X = Cl⁻, NO₃⁻, H₂O). X-ray crystallographic structure determinations show that each ligand provides three donor atoms (NNS) in a meridional configuration to one metal, viz. one of the pyridine nitrogen atoms, the azomethine nitrogen atom and the thiolate sulfur, while the nitrogen atom of the second pyridyl group forms a bridge to another copper(II) ion within the dimer. The coordination geometry around each copper(II) ion is approximately square pyramidal, the basal plane of which is composed of one of the pyridine nitrogen atoms, the azomethine nitrogen atom and a chlorido, nitrato or aqua ligand. The apical position of the square pyramid is always occupied by the pyridine nitrogen atom of the second ligand.     

Studies on Co(II) and Co(III) complexes of di-2-pyridyl ketone N(4)-cyclohexyl and N(4)-phenyl thiosemicarbazones

Six new Co(II) and Co(III) complexes (1–6) of di-2-pyridyl ketone N(4)-cyclohexyl thiosemicarbazone (HL¹) and di-2-pyridyl ketoneN(4)-phenyl thiosemicarbazone (HL²) have been synthesized and spectrochemically characterized. HL¹ is newly synthesized and has been structurally characterized by single crystal X-ray diffraction studies, while HL² has been previously reported. HL¹ crystallizes into a monoclinic lattice with the space group P2₁. The complexes are characterized by magnetic, EPR, NMR and other spectroscopic studies. The EPR spectra of the paramagnetic complexes reveal axial features with eight hyperfine lines clearly resolved in the perpendicular region.     

Synthesis and spectral characterization of zinc(II) and cadmium(II) complexes of acetone-N(4)-phenylsemicarbazone: Crystal structures of acetone-N(4)-phenylsemicarbazone and a cadmium(II) complex

Seven Zn(II) and Cd(II) complexes of ON donor acetone-N(4)-phenylsemicarbazone (HL) have been synthesized and physico-chemically characterized by partial elemental analyses, molar conductance measurements, infrared, electronic and ¹H NMR spectral studies. The semicarbazone binds the metal as a neutral bidentate ligand in all the complexes. The crystal structures of acetone-N(4)-phenylsemicarbazone and [Cd(HL)₂Cl₂] have been determined by X-ray diffraction studies. The coordination geometry around cadmium(II) in the complex [Cd(HL)₂Cl₂] is distorted octahedral.     

Synthesis and characterization of mononuclear copper(II) and cadmium(II) complexes with di-(2-picolyl)sulfur

The reaction of Cu(ClO₄)₂·6H₂O and Cd(ClO₄)₂ with di-(2-picolyl)sulfur (dps) leads to the formation of mononuclear complexes [Cu(dps)(H₂O)(ClO₄)](ClO₄) (1) and [Cd(dps)₂](ClO₄)₂ (2). The crystal structure of 1 exhibits a distorted square pyramidal geometry, coordinated by one sulfur and two nitrogen atoms from the dps ligand, one water molecule and one perchlorate oxygen atom. For 2, the environment around cadmium atom is in a distorted octahedron with four nitrogen and two sulfur atoms from the dps ligand. Cyclic voltammetric data show that complexes undergo two waves of a one-electron transfer corresponding to M(II)/M(III) and M(II)/M(I) processes. Spectral and electrochemical behaviors of the complexes are also discussed.     

Six-membered ring chelate complexes of Pd(II) and Pt(II) derived from di-(2-pyridyl)pyrimidin-2-ylsulfanylmethane

Cis-[MLCl₂] complexes of di-(2-pyridyl)pyrimidin-2-ylsulfanylmethane ligand (L), where M = Pd (1), and M = Pt (2) have been synthesized. Reaction of 1 with L in presence of Na[BF₄] and hot acetonitrile produced the complex [PdL₂](BF₄)₂ (3). Complexes 1-3 and ligand L have been characterized by elemental analyses, IR and NMR spectroscopy. Crystal structures of 1, 3 and L were determined by single crystal X-ray diffraction analyses, showing nonplanar structures with the pyridinic rings twisted around the bridging carbon and the ipso carbon bonds. 1 and 3 displayed a bidentate coordination of L to the palladium atom with the formation of six-membered chelate rings, where the local geometry at palladium atom was distorted square planar. In 3 the palladium atom was coordinated to two dipyridyl ligands through two of the pyridinic nitrogen atoms to form a cationic complex stabilized by two tetrafluoroborate counter-ions.     

Triangular Ni2Ln and Ni2Y complexes derived from di-2-pyridyl ketone: Synthesis, structures and magnetic properties

The synthetic investigation of the Ni^II/M(NO₃)₃·6H₂O/di-2-pyridyl ketone [(py)₂CO] tertiary reaction system in EtOH has yielded triangular Ni₂M cationic complexes (M = lanthanide, Y). The reaction between Ln(NO₃)₃·6H₂O, Ni(ClO₄)₂·6H₂O, (py)₂CO and base (1:3:3:3) in EtOH under gentle heating gave the isostructural complexes [Ni₂Ln{(py)₂C(OEt)(O)}₃{(py)₂C(OH)(O)}(NO₃)(H₂O)](ClO₄)₂ (Ln = Gd, 2; Ln = Tb, 3) in high yields. The ligands (py)₂C(OEt)(O)⁻ and (py)₂C(OH)(O)⁻ are the monoanions of the hemiketal and gem-diol derivatives of (py)₂CO, respectively, formed in situ in the presence of the metal ions. The cations of 2 and 3 consist of one 8-coordinate Ln^III and two distorted octahedral Ni^II atoms in an essentially isosceles, triangular arrangement capped by a central μ₃-Ο⁻ atom of the unique 3.3011 (Harris notation) (py)₂C(OH)(O)⁻ ligand. Each metal-metal edge is bridged by the deprotonated O atom of one 2.2011 (py)₂C(OEt)(O)⁻ ligand. The isostructural complexes [Ni₂M{(py)₂C(OEt)(O)}₄(NO₃)(H₂O)]₂[M(NO₃)₅](ClO₄)₂ (M = Y, 4 ; M = Tb, 5 ; M = Dy, 6) were prepared by the 1:1 reaction of the mononuclear “metalloligand” [Ni(O₂CMe){(py)₂CO}{(py)₂C(OH)₂}](ClO₄) (1) and M(NO₃)₃·6H₂O in EtOH under mild heating in moderate to good yields. The structures of the dications of 4-6 are similar to those in 2 and 3, the only difference being the replacement of the unique 3.3011 (py)₂C(OH)(O)⁻ ligand of the latter by one 3.3011 (py)₂C(OEt)(O)⁻ group in the former. The Y^III, Tb^III and Dy^III atoms in [M(NO₃)₅]²⁻ are coordinated by five bidentate chelating nitrato groups. Characteristic IR bands of the complexes are discussed in terms of the known structures and the coordination modes of the ligands. Variable temperature, solid-state direct current magnetic susceptibility and magnetization studies were carried out on dried samples of 2-4. The data indicate ferromagnetic Ni?Ni and Ni?Gd exchange interactions, and an S_T = 11/2 ground state for 2. Complex 3 is characterized by a high-spin ground state while the ferromagnetic Ni?Ni interaction for 2 is independently supported by the study of 4. No out-of-phase, alternating current susceptibility signals have been detected for 3 that would be indicative of SMM behavior.     

Synthesis and analytical properties of di-2-pyridyl ketone guanylhydrazone

The synthesis and analytical properties of di-2-pyridyl ketone guanylhydrazone (DPGH) are described. The reagent was tested with 37 cations but only Co(II), Ni(II), Cu(II), Fe(II) and Pd(II) gave colored complexes. The spectral characteristics of the reagent and the above complexes as well as the procedures for a selective determination of total iron, cobalt(II), copper(II), nickel(II) and palladium(II) are reported.     

Mononuclear versus dinuclear complex formation in nickel(II) sulfate/phenyl(2-pyridyl)ketone oxime chemistry depending on the ligand to metal reaction ratio: synthetic, spectral and structural studies

The reactions of phenyl(2-pyridyl)ketone oxime (py)C(ph)NOH, with nickel(II) sulfate hexahydrate under reflux, in the absence of an external base, have been investigated. The reaction of NiSO(4).6H(2)O with two equivalents of (py)C(ph)NOH in H(2)O/MeOH leads to the dinuclear complex [Ni(2)(SO(4))(2){(py)C(ph)NOH}(4)] (1), while an excess of the organic ligand affords the 1:3 cationic complex [Ni{(py)C(ph)NOH}(3)](SO(4)) (2). Compound 1 is transformed into 2 by a reaction with an excess of ligand in refluxing H(2)O/MeOH. Reactions of 1 and 2 with a limited amount of LiOH give the known cluster [Ni(6)(SO(4))(4)(OH){(py)C(ph)NO}(3){(py)C(ph)NOH}(3)(H(2)O)(3)]. The structures of 1 and 2 have been determined by single-crystal X-ray crystallography. In both complexes the organic ligand chelates through its 2-pyridyl and oxime nitrogen atoms. The metal centers of 1 are bridged by two eta(1):eta(1):mu sulfato ligands; each metal ion has the cis-cis-trans deposition of the coordinated sulfato oxygen, pyridyl nitrogen and oxime nitrogen atoms, respectively. The cation of 2 is the fac isomer considering the positions of the coordinated pyridyl and oxime nitrogen atoms. The crystal structures of both complexes are stabilized by hydrogen bonds. Compounds 1 and 2 join a small family of structurally characterized metal complexes containing the neutral or anionic forms of phenyl(2-pyridyl)ketone oxime as ligands. The IR spectra of the two complexes are discussed in terms of the nature of bonding and their structures. From the vibrational spectroscopy viewpoint, the SO(4)(2-) groups in 1 and 2 appear to have lower symmetries compared with those deduced from X-ray crystallography; this is attributed to the participation of sulfates in hydrogen bonding interactions.     

Five-membered ring chelate complexes of Ni(II), Pd(II) and Pt(II) derived of di-(2-pyridyl)-N-ethylimine

Cis-diaquobis{di-(2-pyridyl)-N-ethylimine}nickel(II) chloride (2) was obtained from the reaction of di-(2-pyridyl)-N-ethylimine (1) and [NiCl₂dppe] [dppe = cis-1,2-bis(diphenylphosphino)ethylene] in a 2:1 ratio in hot acetonitrile. Cis-dichloro{di-(2-pyridyl)-N-ethylimine}palladium(II) (3) and cis-dichloro{di-(2-pyridyl)-N-ethylimine}platinum(II) (4) complexes were obtained from the reaction of MCl₂ (M = Pd, Pt) and (1) in equimolar ratio in hot acetonitrile. Compounds 1–4 were characterized by IR spectroscopy, elemental analysis, and mass spectrometry; the complexes 3 and 4 were characterized in solution by NMR. In addition, solid state structures of compounds 1–4 were determined using single crystal X-ray diffraction analyses. X-ray diffraction data of the complexes 3 and 4 showed a distorted square planar local geometry at palladium and platinum atoms with the chlorine atoms in a cis-coordination; in 2 a local octahedral geometry at nickel atom was observed. Complexes 3 and 4 are arranged as dimers with a M?M distance of 3.4567(4) Å (M = Pd) and 3.4221(4) Å (M = Pt), respectively; 2 consists of units linked by intermolecular hydrogen bonding.     

Strong antiferromagnetic coupling in doubly N,O oximato-bridged dinuclear copper(II) complexes

The use of di-2-pyridyl ketone oxime, (py)pkoH, and phenyl 2-pyridyl ketone oxime, ppkoH, in copper(II) hexafluoroacetylacetonate chemistry is reported. The reaction of CuCl₂·2H₂O with one and two equivalents of ppkoH and Na(hfac), respectively, in CH₂Cl₂ affords the dinuclear complex [Cu₂(hfac)₂(ppko)₂] (1) in excellent yield. The replacement of ppkoH by (py)pkoH gives the isostructural compound [Cu₂(hfac)₂{(py)pko}₂] (2) in good yield. The Cu^II atoms in both 1 and 2 are doubly bridged by the oximate groups of two η¹:η¹:η¹:μ₂ ppko⁻ and (py)pko⁻ ligands, respectively. The bridging Cu–(R–NO)–Cu′ units are not planar, with the torsion angles being 23.2° (1) and 20.3° (2). A bidentate chelating hfac⁻ ligand completes five-coordination at each square pyramidal metal ion. The hfac⁻-free reaction system CuCl₂·2H₂O/(py)pkoH/NEt₃ (1:2:1) gives instead the mononuclear complex [CuCl{(py)pko}{(py)pkoH}] (3) in very good yield. The Cu^II atom is coordinated by two N,N′-bidentate (py)pko⁻/(py)pkoH chelates and a monodentate chloride anion resulting in a distorted square pyramidal geometry around the metal center. Variable-temperature, solid-state dc magnetic studies were carried out on the representative dinuclear complex 1 in the 2.0–300 K range. The data indicate a very strong antiferromagnetic exchange interaction and a resulting S = 0 ground state, which is well isolated from the S = 1 excited state. The J value of −720 cm⁻¹ was derived from the fitting of the experimental data using the Hamiltonian H = −J(S₁ · S₂).     

Copper(II) complexes of N(4)-substituted thiosemicarbazones derived from pyridine-2-carbaldehyde: Crystal structure of a binuclear complex

Ten copper(II) complexes {[CuL¹Cl] (1), [CuL¹NO₃]₂ (2), [CuL¹N₃]₂ · 2/3H₂O (3), [CuL¹]₂(ClO₄)₂ · 2H₂O (4), [CuL²Cl]₂ (5), [CuL²N₃] (6), [Cu(HL²)SO₄]₂ · 4H₂O (7), [Cu(HL²)₂] (ClO₄)₂ · 1/2EtOH (8), [CuL³Cl]₂ (9), [CuL³NCS] · 1/2H₂O (10)} of three NNS donor thiosemicarbazone ligands {pyridine-2-carbaldehyde-N(4)-p-methoxyphenyl thiosemicarbazone [HL¹], pyridine-2-carbaldehyde-N(4)-2-phenethyl thiosemicarbazone [HL²] and pyridine-2-carbaldehyde N(4)-(methyl), N(4)-(phenyl) thiosemicarbazone [HL³]} were synthesized and physico-chemically characterized. The crystal structure of compound 9 has been determined by X-ray diffraction studies and is found that the dimer consists of two square pyramidal Cu(II) centers linked by two chlorine atoms.     

Synthesis,spectral characterization and crystal structure of copper(II) complexes of 2-hydroxyacetophenone-N(4)-phenyl semicarbazone

Six new copper(II) complexes of 2-hydroxyacetophenone-N(4)-phenyl semicarbazone have been synthesized and physico-chemically characterized. The tridentate character of the semicarbazone is inferred from IR spectra. Based on EPR studies, the spin Hamiltonian and bonding parameters have been calculated. The g   values, calculated for all the complexes in frozen DMF, indicate the presence of the unpaired electron in the d_x2-y2${\text{d}}_{x^2-y^2}$ orbital. The metal–ligand bonding parameters evaluated showed strong in-plane σ and in-plane π-bonding. The structure of the compound, CuLphen has been resolved using single crystal X-ray diffraction studies. The crystal structure revealed a monoclinic lattice with space group symmetry P2₁/c. The compound adopts a distorted square pyramidal geometry with a N₂O₂ core as the base.     

Ligation properties of 2-acetyl-2-thiazoline semicarbazone (ATsc): Isolation, spectroscopic and X-ray study of ATsc and its Cu(II) and Ni(II) complexes

A new ligand, 2-acetyl-2-thiazoline semicarbazone (ATsc), has been prepared and characterized by a variety of physico-chemical techniques. Likewise, the metal complexes [CuCl₂(ATsc)] and [Ni(ATsc)₂](NO₃)₂ · H₂O have been isolated and characterized through elemental analysis, IR, UV–Vis–NIR diffuse reflectance and magnetic susceptibility, as well as, in the case of the copper complex, by means of EPR. Moreover, the structures have been determined by X-ray diffraction. In both complexes the Schiff base acts as a tridentate ligand through N(1), N(2) and O atoms, making two five-membered chelate rings. The copper complex consists of monomeric molecules in which the copper atom is five coordinated in a distorted square-pyramidal geometry, with one ATsc and two chlorine ligands. The complex cation of nickel possesses approximately a non-crystallographic C₂ symmetry. The environment around the nickel atom may be described as a distorted octahedral geometry with the metallic atom coordinated to two ATsc ligands.     

Synthesis and structural characterization of novel zinc(II) and cadmium(II) complexes with pyridine-phosphine chalcogenide ligands

New pyridine-phosphine chalcogenide ligands, tris[2-(2-pyridyl)ethyl]phosphine sulfide 1a and tris[2-(2-pyridyl)ethyl]phosphine selenide 1b, react with zinc(II) and cadmium(II) chlorides in EtOH at room temperature to afford complexes of compositions 2ZnCl₂·2L (2, L = 1a) and 3CdCl₂·2L (3a,b, L = 1a,b) in high yields. The solid-state structure of complexes 2, 3 has been proved by X-ray analysis data. Complex 2 is a centrosymmetric dimer, where two atoms of zinc are bonded by two bridging pyridine-phosphine sulfide ligands through N atoms. Complexes 3a,b exist as polymeric chains with each bridging ligand acting as a chelate N,S- or N,Se-donor to one cadmium(II) center and as a pyridine N-donor to the next cadmium(II) center.     

cis-Palladium(II) complexes of derivatives of di-(2-pyridyl)methane: Study of the influence of the bridge group in the coordination mode

Palladium(II) complexes containing di-(2-pyridyl)-N-methylimine (1), di-(2-pyridyl)methanol (2) and di-(2-pyridyl)methyl-N,N-diethyldithiocarbamate (4) ligands were synthesized and characterized by ¹H and ¹³C NMR in solution, IR and X-ray single crystal diffraction. Crystal structures of cis-dichloro[di-(2-pyridyl)-N-methylimine]palladium(II) (5), cis-dichloro[di-(2-pyridyl)methanol]palladium(II) (6) and cis-dichloro[di-(2-pyridyl)methyl-N,N-diethyldithiocarbamate]palladium(II) (7) showed a bidentate coordination mode of the di-(2-pyridyl)methane derivatives 1, 2 and 4. In these complexes is observed the formation of a five-membered chelate ring with the iminic ligand 1 and six-membered chelate rings with the pyridinic ligands 2 and 4. In all complexes the palladium atom displays a distorted square planar geometry.