First hybrid oximehydrazonate phthalocyaninoclathrochelates: The synthesis and properties of lutetium phthalocyanine-capped cage iron(II) complexes

Ditopic oximehydrazonate iron(II) phthalocyaninoclathrochelates were synthesized by a transmetallation (a capping group exchange) reaction of the initial labile triethylantimony-capped clathrochelate iron(II) oximehydrazonates with lutetium(III) phthalocyanine as a Lewis acid. The complexes obtained were characterized using elemental analysis, PD and MALDI-TOF mass spectrometries, IR, UV–Vis, ⁵⁷Fe Mössbauer, and ¹H, ¹³C{¹H} NMR spectroscopies. An encapsulated iron(II) ion was found to be in a low-spin state. The cyclic voltammograms show oxidation and reduction waves assignable to Fe^2+/3+ couples of macrobicyclic framework and to phthalocyanine macrocycles.     

Unexpected radical substitution of the dichlorine-containing iron(II) clathrochelate with 1,4-dioxane derivatives: Novel approach to functionalization of its macrobicyclic framework

The dichlorine-containing tris-dioximate iron(II) clathrochelate undergoes a radical addition-elimination reaction with the radical derivatives of 1,4-dioxane to yield ribbed-functionalized C-alkylated macrobicyclic complexes. The clathrochelates obtained have been characterized using elemental analysis, MALDI-TOF mass, IR, UV-Vis and multinuclear NMR spectra, as well as X-ray crystallography. This unexpected and previously unknown radical reaction is a novel approach to the ribbed functionalization of tris-dioximate d-metal clathrochelates, and it can be extended to other cyclic ethers.     

On a way to new types of the polyfunctional and polytopic systems based on cage metal complexes: Cadmium-promoted nucleophilic substitution with low-active nucleophilic agents

The nucleophilic substitution of the reactive halogen atoms of clathrochelate precursors with soft nucleophilic agents was promoted by cadmium(II) ion using various types of cadmium-containing compounds. Cadmium(II) activates the C–Hal bond both by the coordination of halogen substituents to this ion and the formation of anionic forms of a nucleophilic agent with cadmium amides, that increase the electron density on a reactive site of this agent. The cadmium-promoted substitution reactions of the reactive chlorine ribbed substituents in the di- and hexachlorine-containing clathrochelate precursors afforded the clathrochelate ribbed-functionalized derivatives of soft nucleophiles [alcohols (including fluorinated ones) and aromatic amines (including the nucleophiles with electron-withdrawing substituents)] by efficient one-pot procedures in high yields under mild conditions with generated in situ low-basic cadmium(II) alcoholates and amides. The complexes obtained were characterized using elemental analysis, MALDI-TOF mass spectrometry, IR, UV–Vis, ⁵⁷Fe Mössbauer, and NMR spectroscopies, and X-ray crystallography. The potential of cadmium-promoted reactions for synthesis of different types of organic and coordination compounds is discussed.     

Two alternative approaches to modification of a cage complex: nucleophilic substitution and electrophilic addition for the synthesis of an iron(II) clathrochelate with an annulated imidazole fragment

A rib-functionalized iron(II) tris-dioximate clathrochelate bearing an annulated phenylimidazole fragment was prepared using nucleophilic substitution and electrophilic addition at the chelating α-dioximate fragment of the macrobicyclic framework. The resultant cage complex was identified with single crystal XRD, analytical data, ¹H, ¹³C, ¹⁹F, ¹¹B NMR spectroscopy, and examined with UV–vis spectroscopy and CVA. Two approaches to modification of the clathrochelate framework are compared.     

Macrocyclic cobalt(III) complexes as precursors for metal-polythiophene hybrid materials

A thiophene-functionalised macrocyclic ligand trans-6,13-dimethyl-6-((thiophen-3-ylmethyl)amino)-1,4,8,11-tetraazacyclotetradecane-13-amine (L¹) has been prepared and complexed with Co^III. The ligand L¹ binds as a pentadentate in the crystallographically characterised complexes [CoL¹(OAc)](ClO₄)₂ and [CoL¹Cl]Cl₂. Electro-copolymerisation of [CoL¹Cl]Cl₂ with 3,4-ethylenedioxythiophene (EDOT) in a 1:2 ratio on a preformed poly-3,4-ethylenedioxythiophene (PEDOT) film resulted in metal–polymer hybrid films of high quality, consistency and uniformity in appearance. The copolymerised films were characterised by XPS indicating a 1:11 ratio of incorporation of complex to EDOT. Electrochemistry of the Co-PEDOT film (cast on an indium-doped tin oxide working electrode) in water revealed a Co^III/II redox couple at a potential ca. −600 mV (vs Ag/AgCl) which is similar to that seen in solution for the monomeric aqua complex [CoL¹(OH₂)]³⁺.     

X-ray structures of cobalt(III) complexes with bio-relevant pyrazolyl thiosemicarbazone: Indication of structural changes on the increasing bulkiness of the alkyl substituents on thiosemicarbazone moiety

X-ray crystallographic studies of cobalt(III) complexes of 5-methyl-3-formylpyrazole-N(4)-diethylthiosemicarbazone (HMP_zNEt₂), [Co(MP _z NEt ₂ ) ₂ ]Br·2H ₂ O, 5-methyl-3-formylpyrazole-N(4)-dipropylthiosemicarbazone (HMP_zNPr ₂ ), [Co(MP _z NPr ₂ ) ₂ ]Br·2H ₂ O and 5-methyl-3formylpyrazole-N(4)-dibutylthiosemicarbazone (HMP_zNBu ₂ ), [Co(MP _z NBu ₂ ) ₂ ]Br·H ₂ O, have been reported. In all the three complex species, X-ray crystallography has authenticated a CoN₄S₂ octahedral coordination with the pair of orthogonally coordinated NNS tridentate ligands in the monodeprotonated form of the ligand. The two azomethine nitrogen atoms are trans to each other, while the pyrazolyl ring nitrogens and the thiolato sulfurs are in cis positions. A gradual decrease in the dihedral angle between the coordinating ligands has been observed with increase in the bulkiness of the aliphatic side chains of the substituent on the thiosemicarbazone moieties. In all the three complexes, intraligand C–H···S contacts appear to arrest the free rotation of the side chains about the C(6)–N(5) single bond. ^†Deceased     

Synthesis, structures and comparative electrochemical study of 2,5-bis(trimethylsilylethynyl)thiophene coordinated cobalt carbonyl units

The reaction between 2,5-bis(trimethylsilylethynyl)thiophene and Co₂(CO)₈ or Co₂(CO)₆(X), (X = dppa, dppm), gave rise to the formation of substituted ethynylcobalt complexes containing one or two Co₂(CO)₆ or Co₂(CO)₄(X) units, 2-[Co₂(CO)₄(X){μ₂-η²-(SiMe₃)C₂}]-5-(Me₃SiCC)C₄H₂S (X = 2CO (1), dppa (3) or dppm (4)) and 2,5-[Co₂(CO)₄(X){μ₂-η²-SiMe₃C₂}]₂C₄H₂S (X = 2CO (2), dppa (5) or dppm (6)). Desilylation of the non-metallated and metallated alkynes in 3, 4 and 6 occurred on treatment with KOH and tetrabutylammonium fluoride to give 2-[Co₂(CO)₄(μ-X){μ₂-η²-SiMe₃C₂}]-5-(CCH)C₄H₂S (X = dppa (7), dppm (8)) and 2,5-[Co₂(CO)₄(μ-dppm){μ₂-η²-HC₂}]₂C₄H₂S (9), respectively. Crystals of 6 suitable for single-crystal X-ray diffraction were grown and the molecular structure of this compound is discussed. A comparative electrochemical study of all these complexes is presented by means of the cyclic and square-wave voltammetry techniques.     

Syntheses,structures, and spectroscopic properties of copper(II) and cobalt(III) complexes containing 1,4,7-tribenzyl-1,4,7-triazacyclononane ligand

Three new complexes [CuL(N₃)₂] (1), [CuL(SCN)₂] (2), and [CoL(SCN)₃] (3) (L?=?1,4,7-tribenzyl-1,4,7-triazacyclononane) have been synthesized and structurally characterized. Complex 1 crystallizes in monoclinic space group P2(1)/n with unit cell parameters a?=?14.105(7), b?=?8.999(5), c?=?21.603(11)?Å, β?=?100.470(7)°. While 2 crystallizes in triclinic space group P-1 with unit cell parameters a?=?9.6380(16), b?=?10.6993(18), c?=?15.798(3)?Å, α?=?106.636(3), γ?=?116.478(3)°. Complex 3 crystallizes in trigonal space group P–3c1 with unit cell parameters a?=?14.744(3), b?=?14.744(3), c?=?16.098(4)?Å, γ?=?120°. Elemental analysis, IR, UV-vis spectra of complexes 1–3 and ESR spectra of complexes 1–2 were also determined.     

Thio-azo proligands based on 5,6-derivatives-1,10-phenanthroline and their use for iron(II) complexes: Synthesis,characterization and crystal structures

The preparation and characterization of 5,6-substituted-1,10-phenanthrolines, phdtos = 5,6-bistosyl-1,10-phenanthroline (1) and phdbt = 5,6-dibenzyltiol-1,10-phenanthroline (2) are described. The synthesis of (1) was achieved in good yield via the corresponding dihydroxide and 2 was obtained by cross-coupling reaction of 5,6-dibromo-1,10-phenanthroline and benzylthiol mediated by a palladium catalytic system in refluxing toluene (120 °C). These phenanthroline derivatives were used as ligands to afford [Fe^II(phdtos)₃](PF₆)₂ (5) and [Fe^II(phdbt)₃](PF₆)₂ (6) complexes.     

Synthesis and magnetism of the first tetranuclear copper(II)–iron(III) complexes of macrocyclic oxamides

Four novel tetranuclear macrocyclic complexes of the formula [(CuLⁱ)₃Fe](ClO₄)₃·3H₂O (i=1–4, Lⁱ are the dianions of the [14]N₄ and [15]N₄ macrocyclic oxamides, namely 2,3-dioxo-5,6:13,14-dibenzo-7,12-bis(ethoxycarbonyl)-1,4,8,11-tetraazacyclotetradeca-7,11-diene, 2,3-dioxo-5,6:13,14-dibenzo-9-methyl-7,12-bis(ethoxycarbonyl)-1,4,8,11-tetraazacyclotetradeca-7,11-diene and 2,3-dioxo-5,6:14,15-dibenzo-7,13-bis(ethoxycarbonyl)-1,4,8,12-tetraazacyclotetradeca-7,12-diene] have been prepared and characterized. These complexes are the first examples of oxamido-bridged Cu(II)–Fe(III) heterometallic species. Cryomagnetic studies on [(CuL¹)₃Fe](ClO₄)₃·3H₂O (1) and [(CuL³)₃Fe](ClO₄)₃·3H₂O (3) (77–300 K) revealed that the Cu(II) and Fe(III) ions interact antiferromagnetically through the oxamido bridge, with the exchange integral J=−30.8 cm⁻¹ for 1 and J=−28.7 cm⁻¹ for 3 based on . The interaction parameters have been compared with that of the related [Cu₃Mn] compound.     

Rhodium(III) and iridium(III) complexes of thioarylazoimidazoles: Synthesis,structure, spectral characterization,electrochemistry and DFT calculation

[M(SRaaiNR′)Cl₃] (M = Rh(III), Ir(III) and SRaaiNR′ = 1-alkyl-2-{(o-thioalkyl)phenylazo}imidazole) complexes are described in this article. The single crystal X-ray structure of one of the complexes, [Rh(SMeaaiNEt)Cl₃] (3b), shows a tridentate chelation of SMeaaiNEt via N(imidazole), N(azo) and S(thioether) donor centres. Spectral characterization has been done by IR, UV–Vis and ¹H NMR data. The electronic structure, redox properties and spectra are well supported by DFT and TDDFT computation on the complexes.     

Synthesis,characterizations and crystal structures of new antimony (III) complexes with dithiocarbamate ligands

Eight new antimony (III) complexes containing dithiocarbamate ligands (R₂NCS₂)₂SbBr [R₂NCS₂ = OC₄H₈NCS₂ (1), C₂H₅NC₄H₈NCS₂ (2), Me₂NCS₂ (3), C₄H₈NCS₂ (4)] and (R₂NCS₂)₃Sb[R₂NCS₂ = C₅H₁₀NCS₂ (5), Bz₂NCS₂ (6), Et₂NCS₂ (7), (HOCH₂CH₂)₂NCS₂ (8)] have been synthesized by the reactions of antimony (III) halides with dithiocarbamate ligands in 1:2 or 1:3 stoichiometries. All the complexes have been characterized by elemental analysis, melting point as well as spectral [IR and NMR (¹H and ¹³C)] studies. The crystal structures of complexes 1, 5 and 8 have been determined by X-ray single crystal diffraction, and their electrochemical character has also been studied.     

Radial tetra(ferrocenyl)- and tetra(cymantrenyl)cyclobutadienecobalt complexes: Synthesis and structures

Novel radial tetra(ferrocenyl)- and tetra(cymantrenyl)cyclobutadienecobalt complexes were prepared by metal carbonyls free protocol of [2 + 2] cycloaddition reaction of 1,2-diferrocenyl- or 1,2-dicymantrenylethynes with chlorotris(triphenylphospine)cobalt(I) and carboethoxycyclopentadienide sodium with good yields. The molecular structure of these products was confirmed with X-ray analysis, and their electrochemical behavior was studied.     

Synthesis,structures, and characterization of copper(II), nickel(II), and cobalt(III) metal complexes derived from an asymmetric bidentate Schiff-base ligand

An asymmetric bidentate Schiff-base ligand (2-hydroxybenzyl-2-furylmethyl)imine (L–OH) was prepared. Three complexes derived from L–OH were synthesized by treating an ethanolic solution of the appropriate ligand with an equimolar amount of metallic salt. Three complexes, Cu₂(L–O^?)₂Cl₂ (1), Ni(L–O^?)₂ (2) and Co(L–O^?)₃ (3), have been structurally characterized through elemental analysis, IR, UV spectra and thermogravimetric analysis. Single crystal X-ray diffraction shows metal ions and ligands reacted with different proportions 1?:?1, 1?:?2 and 1?:?3, respectively, so copper(II), nickel(II), and cobalt(III) have different geometries.     

Synthesis and structural characterisation of cobalt(II) and iron(II) chloride complexes containing bis(2-pyridylmethyl)amine and tris(2-pyridylmethyl)amine ligands

Treatment of (2-C₅H₄N)CH_{2 3}N (TPA) with one equivalent of MCl₂ in n-BuOH at elevated temperatures affords the six-coordinate complexes [(TPA)MCl₂] (M = Co (1), Fe (2)) and, in the case of CoCl₂, the five-coordinate chloride salt [(TPA)CoCl]Cl (3). Conversely, addition of an excess of CoCl₂ in the latter reaction leads to [(TPA)CoCl]₂[CoCl₄] (4) as the only isolable product. Interaction of one equivalent of (2-C₅H₄N)CH_{2 2}NH (DPA) and MCl₂ under similar reaction conditions to that described above affords the dimeric species [(fac-DPA)MCl(μ-Cl)]₂ (M = Co (5), Fe (6)), while the bis(ligand) halide salts [(fac-DPA)₂M]Cl₂ (M = Co (7), Fe (8)) are accessible on addition of two equivalents of DPA. In the presence of air, 6 undergoes oxidation to give [ (fac-DPA)FeCl_{2 2}(μ-O)] (9). Single-crystal X-ray diffraction studies are reported for 1, 2 · MeCN, 3, , 7 · 3MeCN, 8 · 3MeCN and 9.     

Syntheses, molecular and supramolecular structures, electrochemistry and magnetic properties of two macrocyclic dinickel(II) complexes

The work in this paper reports syntheses, molecular and supramolecular structures, electrochemistry and magnetic properties of two diphenoxo-bridged dinickel(II) compounds [Ni^II₂L(N₃)₂(H₂O)₂]·CH₃CN (1) and [Ni^II₂L(N₃)₂(H₂O)] (2), where H₂L is the tetraimino diphenolate macrocyclic ligand, obtained on [2 + 2] condensation of 4-methyl-2,6-diformylphenol and 2,2′-dimethyl-1,3-diaminopropane. Brown colored compound 1 and green colored compound 2 are produced from the same reaction mixture as a function of temperature; 1 is formed from the reaction mixture in acetonitrile at low temperature (ca. 5 °C), while 2 is formed on heating the reaction mixture in acetonitrile. Crystals of compounds 1 and 2 are monoclinic (space group P2₁/c) and orthorhombic (space group P2₁2₁2₁), respectively. Analyses of the crystal packing of the crystalline phases reveal that two-dimensional topologies are resulted in both 1 and 2 due to hydrogen bonding interactions. Variable-temperature (2-300 K) magnetic susceptibility measurements of the two compounds reveal that the metal centers in both the complexes are coupled by moderate antiferromagnetic interactions with J values (H = -2JS₁·S₂) −18.8 and −34.2 cm⁻¹ for 1 and 2, respectively. Electrochemical analyses of 2 reveal that this compound exhibits two-step reduction couples at E_½ = −977 and −1155 mV.     

Cage complexes as a molecular scaffold for polyfunctional and polytopic systems: Synthesis of the first closo-borate iron(II) clathrochelate

The ribbed functionalization of the clathrochelate iron(II) tris-dioximates as a potential “molecular scaffold” for the synthesis of polyfunctional and polytopic complexes with closo-dodecaborate-anion substituents was performed. closo-Dodecaborate-substituted clathrochelate [FeBd₂(Cl(B₁₂H₁₁NH)Gm)(BF)₂]^2? (where Bd^2? is α-benzyldioxime dianion, Gm is glyoxime residue) dianion was prepared starting from dichloride clathrochelate FeBd₂(Cl₂Gm)(BF)₂ precursor with amino-closo-dodecaborate (NBu₄)[B₁₂H₁₁NH₃] in the presence of potassium tert-amylate. This clathrochelate dianion was isolated as a tetra-n-butylammonium salt and characterized using elemental analysis, MALDI-TOF and PD mass, IR, UV-Vis, ⁵⁷Fe Mössbauer spectra as well as by ¹H, ¹¹B and ¹³C{¹H} NMR spectra.     

Iron(II) and cobalt(II) complexes bearing 8-(1-aryliminoethylidene) quinaldines: Synthesis, characterization and ethylene dimerization behavior

The series of bidentate N^N iron(II) and cobalt(II) complexes containing 8-(1-aryliminoethylidene) quinaldine derived ligands, 8-[2,6-(R¹)₂-4-R²-C₆H₂NC (Me)]-2-Me-C₁₀H₅N, were synthesized and characterized by elemental and spectroscopic techniques. The molecular structures of Co1 (R¹ = Me, R² = H), Co3 (R¹ = ⁱPr, R² = H) and Co4 (R¹ = R² = Me) were confirmed as the distorted tetrahedral by single crystal X-ray diffraction. On treatment with modified methylaluminoxane (MMAO), these complexes exhibited good catalytic activities of up to 5.71 × 10⁵ g mol⁻¹(Fe) h⁻¹ for the ethylene dimerization at 30 °C under 10 atm of ethylene, in which iron pre-catalysts produced butenes with a high selectivity for α-butene. The correlation between metal complexes, catalytic activities and the product formed were investigated under various reaction parameters.     

Synthesis, structure and redox properties of new cobalt(II) and nickel(II) complexes with 6-ferrocenyl-2,2′-bipyridyl

New ionic complexes [ML₂(MeCN)₂]?2Otf (M = Co or Ni; L = 6-ferrocenyl-2,2′-bipyridyl) were synthesized and characterized by single-crystal X-ray diffraction. Cyclic voltammograms of the compounds [ML₂(MeCN)₂]?2Otf in CH₂Cl₂ show good cycle stability over 100 cycles in the quasi-reversible oxidation potential range (from −0.25 to 0.5 V).