The effect of polyether terminal chains in the liquid crystalline behavior of ortho-palladated complexes

A series of benzylideneanilines bearing terminal polyether chains, HL (HL = R-C₆H₄-CHN-C₆H₄-R′: R = OC₈H₁₇, R′ = O(CH₂CH₂O)₂C₂H₅; R = O(CH₂CH₂O)₂C₂H₅, R′ = OC₈H₁₇; R = R′ = O(CH₂CH₂O)₂C₂H₅; R = OC₁₂H₂₅, R′ = O(CH₂CH₂O)₃C₂H₅; R = O(CH₂CH₂O)₃C₂H₅, R′ = OC₁₂H₂₅; R = R′ = O(CH₂CH₂O)₃C₂H₅) have been prepared. Their dinuclear, [Pd(μ-X)L]₂ (X = OAc, Cl, Br, SC₈), [Pd₂(μ-SCn)(μ-X)L₂] (X = OAc, Cl; n = 8, 2) and mononuclear orthopalladated derivatives, Pd(acac)L, Pd(Ala)L, are reported and their mesogenic properties are compared with those of the analogous compounds with alkoxy chains. In general a great lowering in the melting points is produced for all the products. The free ligands and the alanine complexes are not liquid crystals. The chloro-bridged complexes bearing alkoxy and short polyether chains (O(CH₂CH₂O)₂C₂H₅) show the larger improvement of mesogenic properties. Longer polyether chains (O(CH₂CH₂O)₃C₂H₅) result usually in a destabilization of the mesophases. If only polyether chains are present, the destabilization is important regardless of the chain length. The ability of these molecules as ionic extractants and transporters was qualitatively evaluated for the more propitious cis-dinuclear complexes, which in fact showed some extracting ability, modest but improved compared to the free ligands.     

Synthesis and molecular structures of dialkylselenonium methylide complexes of indium tribromide

The reaction of bromomethyl-dibromo-indium(III), Br₂InCH₂Br with dialkylselenides, R¹SeR² (R¹ = CH₃, R² = CH₂C₆H₅; R¹ = C₂H₅, R² = CH₂C₆H₅; R¹ = R² = CH₂C₆H₅) afforded the corresponding dialkylselenonium methylide complexes of indium tribromide, Br₃InCH₂SeR¹R², which were fully characterized by NMR spectroscopy and single crystal X-ray diffraction studies.     

Synthesis of copper(I) bis(3,5-dimethylpyrazolyl)methane olefin complexes and their reactivity towards carbon monoxide

The chemistry of bis(3,5-dimethylpyrazolyl)methane complexes of copper(I) has been investigated and a dinuclear copper(I) derivative of formula {Cu₂[μ-CH₂(3,5-Me₂Pz)₂]₂}(TfO)₂ [TfO = trifluoromethanesulphonate anion, ], characterized by an uncommon bridging coordination of the bis(pyrazolyl)methane ligands, has been isolated and characterized by X-ray diffraction methods. Moreover, new olefin derivatives of general formula [Cu[CH₂(3,5-Me₂Pz)₂](olefin)]TfO have been prepared (olefin: coe = cyclooctene, van = 4-vinylanisole, nbe = norbornene), their carbonylation reactions, {Cu[CH₂(3,5-Me₂Pz)₂](olefin)}TfO + CO ? {Cu[CH₂(3,5-Me₂Pz)₂](CO)}TfO + olefin, have been studied gas volumetrically and the thermodynamical parameters of the equilibria for the displacement of the coordinated olefin by carbon monoxide have been determined.     

Novel organotin(IV) compounds derived from bis(organostannyl)methanes: Synthesis and crystal structures of bis[diphenyl(pyridin-2-onato)stannyl]methane and bis[bromophenyl(pyrimidine-2-thionato)stannyl]methane · C7H8

Reaction between bis(chlorodiphenylstanyl)methane and the sodium salt of 2-hydroxypyridine (pyONa) in the molar ratio of 1:2 provides the organotin hydroxide derivative [Ph₂(pyO)SnCH₂Sn(OH)Ph₂]₂ (1) (where pyO = anion of 2-hydroxypyridine), while reaction of bis(dibromophenylstanyl)methane with the sodium salt of pyrimidine-2-thione (pmtNa) in molar ratio of 1:4 gives the corresponding organotin thiolate derivative, as its toluene solvate [BrPh(pmt)Sn]₂CH₂ · C₇H₈ (2) (where pmt = anion of pyrimidine-2-thione). Both compounds were characterized by single crystal X-ray diffraction analysis and contain five-coordinate tin atoms. Compound 1 is a centrosymmetric head-to-tail dimmer with almost symmetrical Sn(1)-O(H)-Sn(2A) bridges.     

Rare earth metal bis(alkyl) complexes bearing amino phosphine ligands: Synthesis and catalytic activity toward ethylene polymerization

Reactions of neutral amino phosphine compounds HL^1-3 with rare earth metal tris(alkyl)s, Ln(CH₂SiMe₃)₃(THF)₂, afforded a new family of organolanthanide complexes, the molecular structures of which are strongly dependent on the ligand framework. Alkane elimination reactions between 2-(CH₃NH)-C₆H₄P(Ph)₂ (HL¹) and Lu(CH₂SiMe₃)₃(THF)₂ at room temperature for 3 h generated mono(alkyl) complex (L¹)₂Lu(CH₂SiMe₃)(THF) (1). Similarly, treatment of 2-(C₆H₅CH₂NH)-C₆H₄P(Ph)₂ (HL²) with Lu(CH₂SiMe₃)₃(THF)₂ afforded (L²)₂Lu(CH₂SiMe₃)(THF) (2), selectively, which gradually deproportionated to a homoleptic complex (L²)₃Lu (3) at room temperature within a week. Strikingly, under the same condition, 2-(2,6-Me₂C₆H₃NH)-C₆H₄P(Ph)₂ (HL³) swiftly reacted with Ln(CH₂SiMe₃)₃(THF)₂ at room temperature for 3 h to yield the corresponding lanthanide bis(alkyl) complexes L³Ln(CH₂SiMe₃)₂(THF)_n (4a: Ln = Y, n = 2; 4b: Ln = Sc, n = 1; 4c: Ln = Lu, n = 1; 4d: Ln = Yb, n = 1; 4e: Ln = Tm, n = 1) in high yields. All complexes have been well defined and the molecular structures of complexes 1, 2, 3 and 4b-e were confirmed by X-ray diffraction analysis. The scandium bis(alkyl) complex activated by AlEt₃ and [Ph₃C][B(C₆F₅)₄], was able to catalyze the polymerization of ethylene to afford linear polyethylene.     

Effect of ring substituents on crystal packing and H-bonding in a series of halobis(phen)copper(II) arylphosphonic acid complexes

The synthesis and crystal structures of five new analogues of the supramolecular copper(II) organophosphonate [Cu^II(phen)₂Cl][(C₆H₅PO(OH)₂)((OH)O₂PC₆H₅)] (1) are presented. The structures contain substituted phenylphosphonic acids, and are of the general formula [Cu^II(phen)₂Cl][(XPO(OH)₂)((OH)O₂PX)] · Z, where X = o-CH₃(C₆H₅) (2); X = p-CH₃(C₆H₅), Z = H₂O · 2CH₃CH₂OH (4); X = o-NO₂(C₆H₅), m-NO₂(C₆H₅) (5); X = m-NO₂(C₆H₅) (6); X = C₁₀H₇ (7).     

Syntheses and structures of N-polyfluorophenyl- and N,N′-bis(polyfluorophenyl)ethane-1,2-diaminato(1- or 2-)platinum(II) complexes

The reaction of [PtX₂(L)] (X = Cl, Br, I; L = NH₂CH₂CH₂NY₂; Y = Et, Me) with thallium(I) carbonate and a polyfluorobenzene (RF) in pyridine (py) yields the platinum(II) complexes, [Pt{N(R)CH₂CH₂NY₂}X(py)] (R = C₆F₅, 4-HC₆F₄, 4-BrC₆F₄, or 4-IC₆F₄, Y = Et (1), Me (2), X = Cl, Br or I) in an improved synthesis. From the reaction of [PtCl₂(H₂NCH₂)₂)] with Tl₂CO₃ and 1,2,3,4-tetrafluorobenzene or 2-bromo-1,3,4,5-tetrafluorobenzene in py, the new complexes [Pt(NRCH₂)₂(py)₂] (3) (R = C₆H₂F₃-2,3,6 and C₆HBrF₃-2,3,5,6) have been isolated but the latter preparation also gave product(s) with a 4-bromo-2,3,5-trifluorophenyl group. From an analogous preparation in 4-ethylpyridine (etpy), [Pt(N(4-HC₆F₄)CH₂)₂(etpy)₂] (4) was obtained. The X-ray crystal structures of (3) (R = C₆HBrF₃-2,3,5,6) and (4) were determined as well as that of the previously prepared (3) (R = 4-BrC₆F₄) and a more precise structure of (3) (R = 4-HC₆F₄) has been obtained.     

Synthesis and molecular structures of lanthanocene amide complexes and their catalytic activity for addition of amines to nitriles

Reaction of (CH₃C₅H₄)₂LnCl(THF) with NaNHAr in a 1:1 molar ratio in THF afforded the amide complexes (CH₃C₅H₄)₂LnNHAr(THF) [(Ar = 2,6-Me₂C₆H_3, Ln = Yb (I), Y (III); Ar = 2,6-ⁱPr₂C₆H₃, Ln = Yb (II)]. X-ray crystal structure determination revealed that complexes I-III are isostructural. The central metal in each complex coordinated to two methylcyclopentadienyl groups, one amide group and one oxygen atom from THF to form a distorted tetrahedron. Complexes I-III and a known complex (CH₃C₅H₄)₂YbNⁱPr₂(THF) IV all can serve as the catalysts for addition of amines to nitriles to monosubstituted N-arylamidines. The activity depended on the central metals and amide groups, and the active sequence follows the trend IV ≈ III < I < II.     

Carboxy-functionalized dithiolate di-iron complexes related to the active site of Fe-only hydrogenase

Reactions of the di-iron complex [Fe₂(μ-S)₂(CO)₆]²⁻ with carboxy-functionalized dihalide derivatives (XCH₂)₂R (X = Cl, R = NC₆H₄CH₂CO₂CH₃; X = Br, R = C₆H₃COOH, C₆H₃COON(COCH₂)₂) gave new functionalized dithiolate di-iron complexes [Fe₂(μ-SRS)(CO)₆] (R = (CH₂)₂NC₆H₄CH₂CO₂CH₃ (1), (CH₂)₂C₆H₃COOH (2), (CH₂)₂C₆H₃COON(COCH₂)₂ (3)) in low yields. The azadithiolate complex 1 has been characterized by a single crystal X-ray diffraction analysis and studied by electrochemical methods.     

Syntheses and characterizations of nine coordination polymers of transition metals with carboxylate anions and bis(imidazole) ligands

Nine new compounds, namely [CuL1(biim-6)] · H₂O (1), [ZnL1(biim-6)] · H₂O (2), [MnL1(biim-6)] · H₂O (3), [MnL1(biim-4)] (4), [Co₂(L2)₂(biim-5)₃ · 6H₂O] · 8H₂O (5), [ZnL3(biim-6)] (6), [ZnL3(biim-5)] (7), [CdL3(biim-5) · 1.5H₂O] · 0.5H₂O (8) and [CdL4(biim-6) · 2H₂O] (9) [where L1 = oxalate anion, L2 = fumarate anion, L3 = phthalate anion, L4 = p-phthalate anion, biim-4 = 1,1′-(1,4-butanediyl)bis(imidazole), biim-5 = 1,1′-(1,5-pentanedidyl)bis(imidazole) and biim-6 = 1,1′-(1,6-hexanedidyl)bis(imidazole)] were successfully synthesized. Compounds 1–3 are isostructural, and display 2D polymeric structures. Compound 4 shows a threefold interpenetrating diamondoid framework. In compound 5, the anions act as counterions, and the metal cations are bridged by bis(imidazole) ligands to form 1D polymeric chains. Compounds 6–9 show 2D polymeric structures. The magnetic properties for 1, 3 and 4 and luminescent properties for 2 and 6–9 are discussed. Thermogravimetric analyses (TGA) for these compounds are also discussed.     

Synthesis of triarylphosphines having para -SH and -SMe groups: Preparation of their complexes and formation of a monolayer on a gold surface

The phosphines P(C₆H₄-4-SR)₃ (R = H, Me, 2-C₅H₉O) and (C₆H₄-4-SR)₂PCH₂CH₂P(C₆H₄-4-SR)₂ (R = H, Me) have been synthesized. The phosphines with -SMe groups can be prepared by reaction of 4-BrC₆H₄SMe with either BuLi or magnesium (to generate the corresponding Grignard compound) followed by reaction with PCl₃ or Cl₂PCH₂CH₂PCl₂, respectively. The methyl group can be eliminated by reaction with sodium in liquid NH₃. Other methods of protection/deprotection of the thiol group failed to afford the desired compounds. Reaction of 4-BrC₆H₄SH with dihydropyrane afforded the protected thiol 4-BrC₆H₄S-2-C₅H₉O from which the corresponding phosphine was successfully synthesized. However, attempts to remove the tetrahydropyranyl group by reaction with AgNO₃-HCl, gave an insoluble polymer as product. Reaction of P(C₆H₄SR)₃ (R = H, Me) with Ni(CO)₄ affords the corresponding mono phosphine complex quantitatively. The complex with the unprotected thiol group can be absorbed on a gold surface and the corresponding ν_CO bands were detected by grazing angle Fourier transform infrared reflection absorption spectroscopy (grazing angle FTIR-RAS). Reaction of Rh(acac)(CO)₂ with P(C₆H₄SR)₃ (R = Me) affords the complex Rh(acac)(CO)(P(C₆H₄SR)₃) (R = Me), but if R = H a polymer insoluble in any solvent was obtained. The same occurs in the case of PtCl₂(CO)(DMSO). Apparently, once P(C₆H₄SH)₃ is coordinated to a metal not in the zero oxidation state, oxidation of the thiol group to disulphide becomes very easy even in a dinitrogen atmosphere.     

Synthesis,crystal structure and magnetic properties of the helical oxalate-bridged copper(II) chain {[(CH3)4N]2[Cu(C2O4)2] · H2O}n

The preparation, crystal structure and magnetic properties of a new oxalate-containing copper(II) chain of formula {[(CH₃)₄N]₂[Cu(C₂O₄)₂] · H₂O}_n (1) [(CH₃)₄N⁺ = tetramethylammonium cation] are reported. The structure of 1 consists of anionic oxalate-bridged copper(II) chains, tetramethylammoniun cations and crystallization water molecules. Each copper(II) ion in 1 is surrounded by three oxalate ligands, one being bidentate and the other two exhibiting bis-bidenate coordination modes. Although all the tris-chelated copper(II) units from a given chain exhibit the same helicity, adjacent chains have opposite helicities and then an achiral structure results. Variable-temperature magnetic susceptibility measurements of 1 show the occurrence of a weak ferromagnetic interaction through the oxalate bridge [J = +1.14(1) cm⁻¹, the Hamiltonian being defined as H = –J ∑_nmS_i · S_j]. This value is analyzed and discussed in the light of available magneto-structural data for oxalate-bridged copper(II) complexes with the same out-of-plane exchange pathway.     

Ethylene polymerization by 3-oxa-pentamethylene bridged dinuclear metallocene (Ti, Zr)/MAO systems

Two hetero-atom containing bridged dinuclear metallocene complexes, (CpMCl₂)₂(C₅H₄CH₂CH₂OCH₂CH₂C₅H₄) [M = Ti (1), Zr (2)], have been synthesized by treating the disodium salt of the corresponding ligand (C₅H₅CH₂CH₂)₂O with two equivalents of CpTiCl₃ and CpZrCl₃ · DME, respectively, in THF at 0 °C and characterized by ¹H- and ¹³C-NMR, MS and IR spectroscopy. Homogenous ethylene polymerization by those complexes has been conducted systematically in the presence of methylaluminoxane (MAO). The influences of reaction parameters, such as [MAO]/[Cat] molar ratio, catalyst concentration, ethylene pressure, temperature and time, have been studied in detail. The catalytic activities of the dinuclear complexes 1 and 2 were higher than those of (MeCpTiCl₂)₂(C₅H₄CH₂C₆H₄CH₂C₅H₄) (3), (CpZrCl₂)₂(C₅H₄CH₂C₆H₄CH₂C₅H₄) (4) and the mononuclear metallocenes Cp₂TiCl₂ and Cp₂ZrCl₂, respectively. Complex 2 showed high catalytic activity at high temperature (50-100 °C) and high pressure (6 bar). The molecular weight distributions of polyethylene produced by 1 and 2 (MWD = 2.49 and 5.90) were broader than those using the corresponding mononuclear metallocenes (MWD = 2.05 and 2.15). The melting points of the polyethylene produced ranged from 129 to 133 °C, indicating a high linearity and a high crystallinity.     

Organogold(III) complexes containing chelating bis(amidate) ligands: Synthesis,characterisation and biological activity

Reactions of cycloaurated gold(III) dichloride complexes, with 1,2-C₆H₄(NHCOMe)₂ and silver(I) oxide, or with C₂H₄(NHSO₂Tol)₂ (Tol = p-tolyl) or 1,2-C₆H₄(NHSO₂Tol)₂ and trimethylamine, give a series of new auracyclic complexes containing the Au–NR–CH₂CH₂–NR (R = SO₂Tol) and Au–NR–C₆H₄–NR (R = COMe or SO₂Tol) five-membered ring systems. An X-ray structure determination on (2-bp)Au{N(COMe)C₆H₄N(COMe)} (2-bp = cycloaurated 2-benzylpyridine) shows the presence of puckered metallacyclic rings, with both acetyl substituents positioned below the Au(III) coordination plane. The complex (2-bp)Au{N(COMe)C₆H₄N(COMe)} undergoes ring cleavage in the presence of halide and water, to give the complex (2-bp)Au{N(COMe)C₆H₄NH(COMe)}Cl, which was characterised crystallographically, and shown to contain a monodentate amidate ligand. Biological activity studies of the new auracyclic complexes are also reported, against P388 murine leukaemia cells and a range of bacteria and fungi, with a number of complexes showing high activity.     

Synthesis, characterization and photophysical study of a series of neutral isocyano rhodium(I) complexes with pyridylindolide ligands

Pyridylindole ligand and its chloro substituted derivatives have been synthesized and incorporated into the square planar bis(phenylisocyano) rhodium(I) complexes to give a series of neutral rhodium(I) complexes with general formula of [Rh(X-pyind)(CNR)₂] (R = 2,6-(CH₃)₂-4-BrC₆H₂, 2,4-Cl₂-6-(CH₃O)C₆H₂, 2,4,6-Br₃C₆H₂, 2,4,6-Cl₃C₆H₂; L = 2-(2′-pyridyl)indole, 5-chloro-2-(2′-pyridyl)indole, 4,6-dichloro-2-(2′-pyridyl)indole). The structures of two complex precursors [Rh(cod)(Cl-pyind)] and [Rh(cod)(Cl₂pyind)], and the target complex [Rh(pyind)(CNC₆H₂-2,4-Cl₂-6-(OCH₃))₂] were determined by X-ray crystallography. The UV-vis absorption properties of these complexes and their responses towards the change of temperature were also investigated.     

The synthesis,characterization and melting properties of thiophene-containing dithiocarboxylate complexes of nickel(II)

The reactions of a series of 5-alkyl-2-thiophenedithiocarboxylates with nickel(II) chloride afforded two types of complexes, blue nickel(II) complexes with two terminal dithiocarboxylate ligands, [Ni(S₂CTR)₂] and violet nickel(II) complexes with perthio- and dithiocarboxylate ligands, [Ni(S₂CTR)(S₃CTR)] (where T = 2,5-disubstituted thiophene, R = C_nH_2n+1, n = 4, 6, 8, 12, 16). The blue monomers are preferred for the shorter chains (C₄ and C₆) and the violet compounds form exclusively for the longer chains (C₈, C₁₂, and C₁₆) in the alkylthiophene complexes. In addition to the above series, [Ni(S₂CTCH₃)₂], was prepared in a one-pot reaction in THF and both the blue and violet products were isolated. It was possible to convert the blue complexes [Ni(S₂CTR)₂] (R = butyl, hexyl) into the corresponding violet complexes [Ni(S₂CTR)(S₃CTR)] after stirring in THF solutions for prolonged periods of time. Liquid-crystalline properties of these complexes were examined by DSC and POM. The violet complexes with C₈ and C₁₂ alkyl chains showed liquid-crystalline properties.     

New types of asymmetrical bromonium salts [RF(RF′)Br]Y where RF and/or RF′ represent perfluorinated aryl, alkenyl, and alkynyl groups

A series of previously unknown asymmetrical fluorinated bis(aryl)bromonium, alkenyl(aryl)bromonium, and alkynyl(aryl)bromonium salts was prepared by reactions of C₆F₅BrF₂ or 4-CF₃C₆H₄BrF₂ with aryl group transfer reagents Ar′SiF₃ (Ar′ = C₆F₅, 4-FC₆H₄, C₆H₅) or perfluoroorganyl group transfer reagents R_F′BF₂ (R_F = C₆F₅, trans-CF₃CFCF, C₃F₇C≡C) preferentially in weakly coordinating solvents (CCl₃F, CCl₂FCClF₂, CH₂Cl₂, CF₃CH₂CHF₂ (PFP), CF₃CH₂CF₂CH₃ (PFB)). The presence of the base MeCN and the influence of the adducts R_F′BF₂·NCMe (R_F = C₆F₅, CF₃C≡C) on reactions aside to bromonium salt formation are discussed. Reactions of C₆F₅BrF₂ with Alk_F′BF₂ in PFP gave mainly C₆F₅Br and Alk_F′F (Alk_F′ = C₆F₁₃, C₆F₁₃CH₂CH₂), presumably, deriving from the unstable salts [C₆F₅(Alk_F′)Br]Y (Y = [Alk_F′BF₃]⁻). Prototypical reactivities of selected bromonium salts were investigated with the nucleophile I^-and the electrophile H⁺. [4-CF₃C₆H₄(C₆F₅)Br][BF₄] showed the conversion into 4-CF₃C₆H₄Br and C₆F₅I when reacted with [Bu₄N]I in MeCN. Perfluoroalkynylbromonium salts [C_nF_2n+1C≡C(R_F)Br][BF₄] slowly added HF when dissolved in aHF and formed [Z-C_nF_2n+1CFCH(R_F)Br][BF₄].     

The synthesis, structure and ethene polymerization activity of octahedral heteroligated (salicylaldiminato)(β-enaminoketonato)titanium complexes: The X-ray crystal structure of {3-Bu-2-(O)C6H3CHN(Ph)}{(Ph)NC(Me)C(H)C(Me)O}TiCl2

Treatment of the mono(salicylaldiminato)titanium complexes {3-Bu^t-2-(O)C₆H₃CHN(Ar)}TiCl₃(THF) (Ar = C₆H₅, 2,4,6-Me₃C₆H₂ or C₆F₅) with the potassium β-enaminoketonates (C₆H₅)NC(CH₃)C(H)C(R)OK (R = CH₃, CF₃) yielded the first examples of heteroligated (salicylaldiminato) (β-enaminoketonato)titanium dichloride complexes. The complex {3-Bu^t-2-(O)C₆H₃CHN(C₆H₅)}{(C₆H₅)NC(CH₃)C(H)C(CH₃)O}TiCl₂ was structurally characterized by X-ray diffraction and has an orientation with trans-O,O,cis-Cl,Cl, cis-N,N distorted octahedral geometry. These complexes polymerize ethene when activated with MAO; the highest productivity, 5650 kg PE (mol metal)⁻¹ h⁻¹ atm⁻¹, was afforded by {3-Bu^t-2-(O)C₆H₃CHN(C₆F₅)}{(C₆H₅)NC(CH₃)C(H)C(CF₃)O}TiCl₂ at 60 °C.     

Synthesis and characterization of Cu(II), Co(II) and Ni(II) coordination polymers containing bis(imidazolyl) ligands

Two structurally related flexible imidazolyl ligands, bis(N-imidazolyl)methane (L₁) and 1,4-bis(N-imidazolyl)butane (L₂), were reacted with Cu(II), Co(II) and Ni(II) salts of aliphatic/aromatic dicarboxylic acids resulting in the formation of a number of novel metal–organic coordination architectures, [CuB₂(ox)₂(L₁)₂(H₂O)₂] · 4H₂O (1) (ox = oxalate), [Cu(pdc)(L₂)_1.5] · 4H₂O (2, pdc = pyridine-2,6-dicarboxylate), [Co(L)₂(H₂O)₂](tp) · 4H₂O (3, tp = terephthalate), [Ni(L₁)₂(H₂O)₂](ip) · 5H₂O (4, ip = isophthalate), [Cu₂(L₁)₄(H₂O)₄](tp)₂ · 7H₂O (5), [Co(mal)(L₁)(H₂O)] · 0.5MeOH (6, mal = malonate), [Co(pdc)(L₁)(H₂O)] (7). All the complexes have been structurally characterized by X-ray diffraction analysis. The different coordination modes of the dicarboxylate anions, due to their chain length, rigidity and diimidazolyl functionality, lead to a wide range of different coordination structures. The coordination polymers exhibit 1D single chain, ladder, 2D sheet and 2D network structures. The aliphatic and aromatic dicarboxylates can adopt chelating μ₂ and chelating-bridging μ₃ coordination modes, or act as uncoordinated counter anions. The central metal ions are coordinated in N₂O₄, N₄O₂, N₂O₃ and N₃O₃ fashions, depending on the ancillary ligands. The topology of 1 gives rise to macrocycles which are connected through hydrogen bonds to form 1D chains, whereas compound 2 exhibits a 1D polymeric ladder in which the carboxylate acts as a pincer ligand. Compounds 3–5 show doubly bridged 1D chains, and the dicarboxylate groups are not coordinated but form 2D corrugated sheets with water molecules intercalated between the cationic layers. Compound 6 has a 2D network sheet structure in which each metal ion links three neighboring Co atoms by the bis(N-imidazolyl)methane ligand. The cobalt compound 7, with a 2D polymeric double sheet structure, is built from pincer carboxylate (pdc) and 1,4-bis(N-imidazolyl)methane ligands.     

Syntheses and characterization of η-cyclopentadienyl and η-indenyl ruthenium(II) complexes of arylazoimidazoles: The molecular structure of the complex [(η-C5H5)Ru(PPh3)(C6H5-NN-C3H3N2)]

The complex [(η⁵-C₅H₅)Ru(PPh₃)₂Cl] (1) reacts with several arylazoimidazole (RaaiR′) ligands, viz., 2-(phenylazo)imidazole (Phai-H), 1-methyl-2-(phenylazo)imidazole (Phai-Me), 1-ethyl-2-(phenylazo)imidazole (Phai-Et), 2-(tolylazo)imidazole (Tai-H), 1-methyl-2-(tolylazo)imidazole (Tai-Me) and 1-ethyl-2-(tolylazo)imidazole (Tai-Et), gave complexes of the type [(η⁵-C₅H₅)Ru(PPh₃)(RaaiR′)]⁺ {where R, R′ = H (2), R = H, R′ = CH₃ (3), R = H, R′ = C₂H₅ (4), R = CH₃, R′ = H (5), R, R′ = CH₃ (6), R = CH₃, R′ = C₂H₅ (7)}. The complex [(η⁵-C₉H₇)Ru(PPh₃)₂(CH₃CN)]⁺ (8) undergoes reactions with a series of N,N-donor azo ligands in methanol yielding complexes of the type [(η⁵-C₉H₇) Ru(PPh₃)(RaaiR′)]⁺ {where R, R′ = H (9), R = H, R′ = CH₃ (10), R = CH₃, R′ = H (11), R = CH₃, R′ = C₂H₅ (12)}, respectively. These complexes were characterized by FT IR and FT NMR spectroscopy as well as by analytical data. The molecular structure of the complex [(η⁵-C₅H₅)Ru(PPh₃)(C₆H₅-NN-C₃H₃N₂)]⁺ (2) was established by single crystal X-ray diffraction study.