Synthesis and ROMP activity of aminophenol-substituted tungsten(VI) and molybdenum(VI) complexes

Tungsten(VI) and molybdenum(VI) complexes [MO(L¹)Cl₂] and [M(X)(L²)Cl₃] (X = O, NPh) with tridentate aminobis(phenolate) ligand L¹ = methylamino-N,N-bis(2-methylene-4,6-dimethylphenolate) and bidentate aminophenolate ligand L² = 2,4-di-tert-butyl-6-((dimethylamino)methyl)phenolate) were prepared and characterised. These complexes are principally stable in open atmosphere under ambient conditions. When activated with Et₂AlCl, they exhibited high activity in ring-opening metathesis polymerisation (ROMP) of 2-norbornene (NBE) and its derivatives. Especially complexes [M(NPh)(L²)Cl₃], which are easily available from corresponding metal oxides MO₃ by a simple three-step synthesis, were found very efficient ROMP catalysts for NBE (M = Mo, W) and 2-norbornen-5-yl acetate (M = Mo).     

CoLn dinuclear complexes (Ln = Gd,Tb, Dy,Ho and Er) as platforms for 1,5-dicyanamide-bridged tetranuclear Co2Ln2 complexes: A magneto-structural and theoretical study

Five acetate-diphenoxo triply-bridged Co^II-Ln^III complexes (Ln^III = Gd, Tb, Dy, Ho, Er) of formula [Co(μ-L)(μ-Ac)Ln(NO₃)₂] and two diphenoxo doubly-bridged Co^II-Ln^III complexes (Ln^III = Gd, Tb) of formula [Co(H₂O)(μ-L)Ln(NO₃)₃]·S (S = H₂O or MeOH), were prepared in one pot reaction from the compartmental ligand N,N′,N′′-trimethyl-N,N′′-bis(2-hydroxy-3-methoxy-5-methylbenzyl)diethylene triamine (H₂L). The diphenoxo doubly-bridged Co^II-Ln^III complexes were used as platforms to obtain 1,5-dicyanamide-bridged tetranuclear Co^II-Ln^III complexes (Ln^III = Gd, Tb, Dy, Ho, Er). All exhibit ferromagnetic interactions between the Co^II and Ln^III ions and in the case of the Gd^III complexes, the J_CoGd were estimated to be ∼+0.7 cm⁻¹. Compound 3 exhibits slow relaxation of the magnetization.     

New Cu(II)4 and Zn(II)4 complexes: Synthesis, characterization and magnetic and biological studies

Two new isomorphous tetranuclear complexes [Cu₄L₂(4,4′-bipy)₂]·(ClO₄)₄·2CH₃CN·2H₂O (1) and [Zn₄L₂(4,4′-bipy)₂]·(ClO₄)₃·CH₃O·4H₂O (2) have been obtained and fully characterized (where bipy = bipyridine, H₂L = macrocycle is the [2+2] condensation product of 2,6-diformyl-4-fluoro-phenol and 1,4-diaminobutane). They exhibit wheel-like configuration in which two 4,4′-bipy molecules connect two dinuclear [M₂L]²⁺ units. The interactions of the complexes with calf thymus DNA were studied by UV-Vis and CD spectroscopic techniques. The binding constants of 1 and 2 are 2.27 × 10⁶ and 3.89 × 10⁵ M⁻¹, respectively. The magnetic measurement of 1 reveals that there are strong antiferromagnetic coupling (J = -272.6 cm⁻¹) between two Cu(II) ions in the macrocyclic unit and ferromagnetic interaction (j′ = 41.7) between the Cu(II) ions in two adjacent macrocyclic units. Furthermore, the cyclic voltammogram of 1 shows that it undergoes two quasi-reversible processes with the half wave potentials -0.232 and -0.606 V, respectively.     

New complexes of lanthanide Ln(III), (Ln = La, Sm, Gd, Er) with Schiff bases derived from 2-furaldehyde and phenylenediamines

Some new Schiff bases derivates from 2-furaldehyde and phenylenediamines (L^1-3) and their complexes with lanthanum (La), samarium (Sm), gadolinium (Gd) and erbium (Er) have been synthesized. These complexes with general formula [Ln(L^1-3)₂(NO₃)₂]NO₃·nH₂O (Ln = La, Sm, Gd, Er) were characterized by elemental analysis, UV-Vis, FT-IR and fluorescence spectroscopy, molar conductivity and thermal analysis. The metallic ions were found to be eight coordinated. The emission spectra of these complexes indicate the typical luminescence characteristics of the Sm(III), La(III), Er(III) and Gd(III) ions.     

Crystal structure, spectroscopy and magnetism of trinuclear nickel(II), cobalt(II) complexes and their solid solution

Four new complexes [Ni₃(μ-L)₆(H₂O)₆](NO₃)₆·6H₂O (1), [Co₃(μ-L)₆(H₂O)₆](NO₃)₆·6H₂O (2), [Ni₃(μ-L)₆(H₂O)₄(CH₃OH)₂](NO₃)₆·4H₂O (3), [Co₃(μ-L)₆(H₂O)₄(CH₃OH)₂](NO₃)₆·4H₂O (4) (L = 4-amino-3,5-dimethanyl-1,2,4-triazole) were synthesized and structurally characterized by X-ray single-crystal diffraction. The structural analyses show that complex 1 and 2 are isomorphous; complex 3 and 4 are isomorphous. Four complexes all consist of the linear trinuclear cations ([M₃(μ-L)₆(H₂O)₆]⁶⁺ (M = Ni,Co) for 1 and 2; [M₃(μ-L)₆(H₂O)₄(CH₃OH)₂]⁶⁺ (M = Ni,Co) for 3 and 4), NO₃⁻ anions and crystallized water molecules. In the trinuclear cations, the central M(II) ions and two terminal M(II) ions are bridged by three triazole ligands. Other eleven solid solution compounds which are isomorphous with complex 3 and 4 were obtained by using different ratio of Ni(II) and Co(II) ions as reactants and ICP result indicates that ligand L has higher selectivity of Ni(II) ions than that of Co(II) ions. The magnetic analysis was carried out by using the isotropic spin Hamiltonian ? = −2J(?₁?₂ + ?₂?₃) (for complexes 1 and 3) and simultaneously considering the temperature dependent g factor (for complexes 2 and 4). Both the UV-Vis spectra and the magnetic properties of the solid solutions can be altered systematically by adjusting the Co(II)/Ni(II) ratio.     

Be and P NMR analyses on Be complexation with cyclo-tri-μ-imidotriphosphate anions in aqueous solution

Microscopic information on the complexation of Be²⁺ with cyclo-tri-μ-imidotriphosphate anions in aqueous solution has been gained by both ⁹Be and ³¹P NMR techniques at −2.3 °C. Separate NMR signals corresponding to free and complexed species have been observed in both spectra. Based on an empirical additivity rule, i.e., proportionality observed between the ⁹Be NMR chemical shift values and the number of coordinating atoms of ligand molecules, the ⁹Be NMR spectra have been deconvoluted. By precise equilibrium analyses, the formation of [BeX(H₂O)₃]⁺ and [BeX₂(H₂O)₂]⁰ (X = non-bridging oxygen donor as a coordination atom in the phosphate groups) has been verified, and the formation of complexes coordinating with the nitrogen atoms of the cyclic framework in the ligand molecule has been excluded. Instead, the formation of one-to-one (ML) complexes, one-to-two (ML₂), together with two-to-one (M₂L) complexes (L = cP₃O₆(NH)₃) has been disclosed, the stability constants of which have been evaluated as log K_ML = 3.87 ± 0.03 (mol dm⁻³)⁻¹, log K_ML2 = 2.43 ± 0.03 (mol dm⁻³)⁻² and log K_M2L = 1.30 ± 0.02 (mol dm⁻³)⁻², respectively. ³¹P NMR spectra measured concurrently have verified the formation of the complexes estimated by the ⁹Be NMR measurement. Intrinsic ³¹P NMR chemical shift values of the phosphorus atoms belonging to ligand molecules complexed with Be²⁺, together with the ³¹P-³¹P spin-spin coupling constants have been determined.     

Ultra-sensitive determination of cyanide in surface water by gas chromatography–tandem mass spectrometry after derivatization with 2-(dimethylamino)ethanethiol

A gas chromatography–tandem mass spectrometric (GC–MS/MS) method has been established for the determination of cyanide in surface water. This method is based on the derivatization of cyanide with 2-(dimethylamino)ethanethiol in surface water. The following optimum reaction conditions were established: reagent dosage, 0.7 g L⁻¹ of 2-(dimethylamino)ethanethiol; pH 6; reaction carried out for 20 min at 60 °C. The organic derivative was extracted with 3 mL of ethyl acetate, and then measured by using GC–MS/MS. Under the established conditions, the detection and quantification limits were 0.02 μg L⁻¹ and 0.07 μg L⁻¹ in 10-mL of surface water, respectively. The calibration curve had a linear relationship relationship with y = 0.7140x + 0.1997 and r² = 0.9963 (for a working range of 0.07–10 μg L⁻¹) and the accuracy was in a range of 98–102%; the precision of the assay was less than 7% in surface water. The common ions Cl⁻, F⁻, Br⁻, NO₃⁻, SO₄²⁻, PO₄³⁻, K⁺, Na⁺, NH₄⁺, Ca²⁺, Mg²⁺, Ba²⁺, Mn⁴⁺, Mn²⁺, Fe³⁺, Fe²⁺ and sea water did not interfere in cyanide detection, even when present in 1000-fold excess over the species. Cyanide was detected in a concentration range of 0.07–0.11 μg L⁻¹ in 6 of 10 surface water samples.     

2-Pyridyl ketone oximes in iron(III) carboxylate chemistry: Synthesis,structural and physical studies of tetranuclear clusters containing the [Fe4(μ3-O)2] ‘butterfly’ core

The use of 2-pyridyl ketone oximes, pyC(R)NOH (R = H, Me), in iron(III) carboxylate chemistry yielded the tetranuclear complexes [Fe₄O₂Cl₂(O₂CPh)₂{pyC(R)NO}₄] (R = H, 1; R = Me, 2). The crystal structure of 2 revealed the presence of a central [Fe₄(μ₃-O)₂]⁸⁺ core comprising four Fe^III ions in a ‘butterfly’ disposition and two μ₃-O²⁻ ions, each bridging three Fe^III ions forming the ‘wings’ of the ‘butterfly’. The Mössbauer spectra from polycrystalline samples of 2 consist of composite quadrupole-split doublets, with parameters typical for high-spin iron(III) in octahedral environments. Magnetic susceptibility measurements on 2 revealed antiferromagnetic interactions between the S = 5/2 ferric ions; fits to the data required the use of two different parameters for the wingtip–body interactions. The best-fit values for these interactions were J₁ = −85 cm⁻¹ and J₂ = −27 cm⁻¹ (-2J_ijS_iS_j Hamiltonian formalism) resulting to a diamagnetic ground state.     

Series of compositions Bi2(M′xM1−x)4O9 (M′, M=Al, Ga, Fe; 0≤x≤1) with mullite-type crystal structure: Synthesis, characterization and O/O exchange experiment

Series of compositions Bi₂(M′_xM_1−x)₄O₉ with x=0.0, 0.1,…, 1.0 and M′/M=Ga/Al, Fe/Al and Fe/Ga were synthesized by dissolving appropriate amounts of corresponding metal nitrate hydrates in glycerine, followed by gelation, calcination and final heating at 800 °C for 24 h. The new compositions with M′/M=Ga/Al form solid-solution series, which are isotypes to the two other series M′/M=Fe/Al and Fe/Ga. The XRD data analysis yielded in all cases a linear dependence of the lattice parameters related on x. Rietveld structure refinements of the XRD patterns of the new compounds, Bi₂(Ga_xAl_1−x)₄O₉ reveal a preferential occupation of Ga in tetrahedral site (4 h). The IR absorption spectra measured between 50 and 4000 cm⁻¹ of all systems show systematic shifts in peak positions related to the degree of substitution. Samples treated in ¹⁸O₂ atmosphere (16 h at 800 °C, 200 mbar, 95% ¹⁸O₂) for ¹⁸O/¹⁶O isotope exchange experiments show a well-separated IR absorption peak related to the M-¹⁸O_c-M vibration, where O_c denotes the common oxygen of two tetrahedral type MO₄ units. The intensity ratio of M-¹⁸O_c/M-¹⁶O_c IR absorption peaks and the average crystal sizes were used to estimate the tracer diffusion coefficients of polycrystalline Bi₂Al₄O₉ (D=2×10⁻²² m²s⁻¹), Bi₂Fe₄O₉ (D=5×10⁻²¹ m²s⁻¹), Bi₂(Ga/Al)₄O₉ (D=2×10⁻²¹ m²s⁻¹) and Bi₂Ga₄O₉ (D=2×10⁻²⁰ m²s⁻¹).     

Tin(IV) and organotin(IV) derivatives of bis(pyrazolyl)acetate: Synthesis, spectroscopic characterization and behaviour in solution.: X-ray single crystal study of bis(pyrazol-1-yl)acetatotri-iodotin(IV) [SnI3(bdmpza)]

Novel heteroscorpionate-containing tin and organotin(IV) complexes, [SnR_nX_3 − n(L)], R = Me, Buⁿ, Ph, or cy; X = Cl, Br or I, n = 0, 1, 2 or 3; L = bis(pyrazol-1-yl)acetate (bpza) or bis(3,5-dimethylpyrazol-1-yl)acetate (bdmpza), have been synthesized and characterized by spectral (IR, ¹H, ¹³C and ¹¹⁹Sn NMR, ^119mSn Mössbauer) and analytical data. In [SnI₃(bdmpza)], the ligand is fac-N,N′,O-tridentate, the three iodine atoms thus also fac about the six-coordinate tin(IV) atom. Neutral bpzaH reacts with BuⁿSnCl₃, PhSnCl₃ and SnCl₄ in Et₂O in the absence of base, yielding 1:1 adducts [XSnCl₃(bpzaH)] (X = R or Cl).     

DNA binding and cleavage behaviors of copper(II) complexes with amidino-O-methylurea and N-methylphenyl-amidino-O-methylurea,and their antibacterial activities

The two designed copper(II) complexes, [Cu(L^1m)₂]Cl₂ (1) (L^1m = amidino-O-methylurea) and [Cu(L^2m)₂]Cl₂ (2) (L^2m = N-methylphenyl-amidino-O-methylurea), have been investigated for their interaction with calf thymus DNA by utilizing the absorption titration method, viscometric studies and thermal denaturation. The cleavage reaction on pBR322 DNA has been monitored by agarose gel electrophoresis. The results suggest that the two complexes can bind to DNA by non-intercalative modes and exhibit nuclease activities in which supercoiled plasmid DNA is converted to the linear form. Complex 2, with an intrinsic binding constant (K_b) of 1.16 × 10⁵ M⁻¹, shows a higher binding efficiency and a better nuclease activity than complex 1, with a K_b value of 5.67 × 10⁴ M⁻¹. Their DNA cleavage potential can be significantly enhanced by hydrogen peroxide, indicating an oxidative cleavage process. Further examination of the antibacterial activities against Campylobacter has revealed inhibition zones of 9.0 (for 1) and 14.5 mm (for 2), which are in agreement with their minimum inhibitory concentration (MIC) values of 1.56 and 0.78 mg mL⁻¹, respectively. The substantially better reactivity of 2 results from the aromatic moieties on the side chain of the L^2m ligand which act as an additional binding site.     

Two new coordination polymers of Robson-type macrocycle bridged by perchlorate anions: Structure,electrochemistry and magnetism

Two new coordination polymers of Robson-type macrocycles, [Cu₂L¹(μ-ClO₄)₂]_∞ (1) and [Cu₂L²(μ-ClO₄)₂]_∞ (2) (where H₂L¹and H₂L² are the [2+2] condensation products of 2,6-diformyl-4-flurophenol with 1,3-diaminopropane and 2-hydroxy-1,3-diaminopropane, respectively), have been synthesized and characterized. The intriguing feature is that intermolecular perchlorato bridges occur between adjacent copper(II) centers. The cyclic voltammograms of the complexes show that each complex undergoes two pseudo-reversible processes with the half wave potentials, −0.361 V and −0.729 V for 1, and −0.372 V and −0.744 V for 2, respectively. Magnetic susceptibility was measured for 1 and 2 over a temperature range of 2–300 K. The optimized magnetic data were J = −359.6 cm⁻¹, j′ = −30 cm⁻¹ and R = 6.8 × 10⁻⁸ for 1 and J = −411 cm⁻¹, j′ = −26 cm⁻¹ and R = 2.4 × 10⁻⁷ for 2, respectively. The data reveal antiferromagnetic couplings between the copper(II) ions of intra- and intermolecular units.     

Magnetic properties and Eu Mössbauer effects of mixed valence europium copper sulfide, Eu2CuS3

Ternary europium copper sulfide Eu₂CuS₃ have been investigated by X-ray diffraction, ¹⁵¹Eu Mössbauer spectroscopy, magnetic susceptibility, magnetization, and specific heat measurements. In this compound, Eu²⁺ and Eu³⁺ ions occupy two crystallographically independent sites. The ¹⁵¹Eu Mössbauer spectra indicate that the Eu²⁺ and Eu³⁺ ions exist in the molar ratio of 1:1, and the Debye temperatures of Eu²⁺ and Eu³⁺ are 180 and 220 K, respectively. In its magnetic susceptibility, the divergence between the zero-field cooled and field cooled susceptibilities appears below 3.4 K. The specific heat has a λ-type anomaly at the same temperature. From the field dependence of magnetization at 1.8 K, the Eu²⁺ ion was found to be in the ferromagnetic state with the saturation magnetization M_S=6.7 μ_B.     

Microflow injection chemiluminescence system with spiral microchannel for the determination of cisplatin in human serum

A new microflow injection chemiluminescence (μFI-CL) system was described for the determination of cisplatin in human serum. By using the microchip with double spiral channel configuration, the sensitivity was greatly enhanced due to more efficient mixing of the analyte and reagent solutions. Experimental results revealed that common ions in human serum, such as Mn²⁺, Co²⁺, Fe³⁺, Cu²⁺, Zn²⁺, Ni²⁺, Na⁺, K⁺, Ca²⁺, Cl⁻, NO₃⁻, Ac⁻, CO₃²⁻, PO₄³⁻, SO₄²⁻ did not cause interference with the detection of Pt(II) by using 1,10-phenanthroline as the masking agent. Under the optimized conditions, a linear calibration curve (R² = 0.998) over the range 2.0 × 10⁻⁸ to 2.0 × 10⁻⁶ mol L⁻¹ was obtained with the detection limit of 1.24 × 10⁻⁹ mol L⁻¹. The relative standard deviation was found to be 3.46% (n = 12) for 2.0 × 10⁻⁷ mol L⁻¹. The sample consumption was only 2 μL with the sample throughput of 72 h⁻¹. It had been used for trace platinum determination in cisplatin injection and human serum samples after the dosage of cisplatin. The recovery varied from 97.6 to 103.9%. The results proved that the proposed μFI-CL system had the advantages of high sensitivity and precision, low sample and reagents consumption, and high analytical throughput.     

Syntheses, structures and properties of dinickel(II) macrocyclic complexes with two 2-thiophenoethyl pendant arms

Three dinickel(II) macrocyclic complexes [Ni₂L(μ-OAc)]ClO₄•X (L = L¹, L² and L³) with two 2-thiophenoethyl pendant arms, have been synthesized by cyclocondensation between N,N-bis(3-aminopropyl)-2-thiophenoethylamine and 2,6-diformyl-4-R-phenol (where R = Me, Cl and F and X = MeOH, 2MeCN and H₂O, respectively), in the presence of nickel(II) ions. The complexes were characterized by elemental analysis, spectroscopic methods and X-ray diffraction techniques. The geometry around both of the Ni(II) ions in each molecule is a slightly distorted octahedral and the thiopheno groups do not coordinate to the Ni(II) ions, resulting that the complexes display contorted saddle-form configurations. The distances between the Ni?Ni centers for the complexes are 3.145, 3.171 and 3.155 Å, respectively. The influences of the substituted groups R in the benzene rings of the macrocyclic units on the structure, electrochemistry, magnetism, cleavage and antibacterial property to DNA have been investigated. The ES-MS results of the complexes confirm that [Ni₂L]²⁺ species in methanol solution are very stable because all the peaks in ES-MS spectra contain this kind of units. The reduction potentials of the complexes shift towards anode upon increasing the drawing electronic ability of substituted groups. Magnetic measurements in the 2-300 K range indicate weak antiferromagnetism for the dinuclear Ni(II) complexes and the magnetic exchange interactions enhance with the decrease of the Ni-Ni distances. These complexes exhibit cleavage activities towards plasmid pBR322 DNA and antibacterial activities.     

Structural, spectroscopic, and magnetic properties of a diphenolate-bridged FeNi complex showing excellent phosphodiester cleavage activity

To mimic the phosphate ester hydrolysis behavior of purple acid phosphatases the heterobimetallic complex [(BNPP)Fe^IIIL(μ-BNPP)Ni^II(H₂O)](ClO₄) (1) has been synthesized from the precursor complexes [Fe^III(LH₂)(H₂O)₂](ClO₄)₃·3H₂O and [Fe^III(LH₂)(H₂O)Cl](ClO₄)₂·2H₂O. In these compounds, L²⁻ is the anion of the tetraiminodiphenol macrocyclic ligand (H₂L), while LH₂ is the zwitterionic form in which the phenolic protons are shifted to the two metal-uncoordinated imine nitrogens, and BNPP is bis(4-nitrophenyl)phosphate. The X-ray crystal structure of compound 1 has been determined. The structure of 1 comprises of two edge-shared distorted octahedrons whose metal centers are bridged by two equatorial phenolate oxygens and two axially disposed oxygens of a BNPP ligand. The internuclear Fe?Ni distance is 3.083 Å. The high-spin iron(III) and nickel(II) in 1 are antiferromagnetically coupled (J = −7.1 cm⁻¹; H = −2JS₁·S₂) with S = 3/2 spin ground state. The phosphodiesterase activity of 1 has been studied in 70:30 H₂O-(CH₃)₂SO medium with NaBNPP as the substrate. The reaction rates have been measured by varying pH (3-10), temperature (25-50 °C), and with different concentrations of the substrate and complex at a fixed pH and temperature. Treatment of the rate data, obtained at pH 6.0 and at 35 °C, by the Michaelis-Menten approach have provided the following parameters: K_M = 3.6 × 10⁻⁴ M, V_max = 1.83 × 10⁻⁷ M s⁻¹, k_cat = 9.15 × 10⁻³ s⁻¹. As compared to the uncatalyzed hydrolysis rate of BNPP, the k_cat value is 8.3 × 10⁸ times higher, showing that 1 behaves as an excellent model for phosphate ester hydrolysis.     

A new BOD estimation method employing a double-mediator system by ferricyanide and menadione using the eukaryote Saccharomyces cerevisiae

A new biochemical oxygen demand (BOD) sensing method employing a double-mediator (DM) system coupled with ferricyanide and a lipophilic mediator, menadione and the eukaryote Saccharomyces cerevisiae has been developed. In this study, a stirred micro-batch-type microbial sensor with a 560 μL volume and a two-electrode system was used. The chronamperometric response of this sensor had a linear response between 1 μM and 10 mM hexacyanoferrate(II) (r² = 0.9995, 14 points, n = 3, average of relative standard deviation and R.S.D._av = 1.3%). Next, the optimum conditions for BOD estimation by the DM system (BOD_DM) were investigated and the findings revealed that the concentration of ethanol, used to dissolve menadione, influenced the sensor response and a relationship between the sensor output and glucose glutamic acid concentration was obtained over a range of 6.6-220 mg O₂ L⁻¹ (five points, n = 3, R.S.D._av 6.6%) when using a reaction mixture incubated for 15 min. Subsequently, the characterization of this sensor was studied. The sensor responses to 14 pure organic substances were compared with the conventional BOD₅ method and other biosensor methods. Similar results with the BOD biosensor system using Trichosporon cutaneum were obtained. In addition, the influence of chloride ion, artificial seawater and heavy metal ions on the sensor response was investigated. A slight influence of 20.0 g L⁻¹ chloride ion and artificial seawater (18.4 g L⁻¹ Cl⁻) was observed. Thus, the possibility of BOD determination for seawater was suggested in this study. In addition, no influence of the heavy metal ions (1.0 mg L⁻¹ Fe³⁺, Cu²⁺, Mn²⁺, Cr³⁺ and Zn²⁺) was observed. Real sample measurements using both river water and seawater were performed and compared with those obtained from the BOD₅ method. Finally, stable responses were obtained for 14 days when the yeast suspension was stored at 4 °C (response reduction, 93%; R.S.D. for 6 testing days, 9.1%).     

Supramolecular networks through second-sphere coordination based on 1D metal-4,4′-dipyridyldisulfide coordination polymers and hydrogenfumarate or sulfonate anions

Four hydrogen-bonded assemblies of formula [M(dpds)₂(OH₂)₂]A₂·nH₂O (A = anion) are described. These assemblies result from the second-sphere coordination interactions between the 1D coordination polymers [M(dpds)₂(OH₂)₂]²⁺, M = Zn(II) and Cu(II), dpds = 4,4′-dipyridyldisulfide, and the pyridine-3-sulfonate (3pySO₃⁻) or hydrogenfumarate (Hfum⁻) anions. Significantly, supramolecular structural variations are observed depending on the presence of water lattice molecules, which formed discrete aggregates when the Hfum⁻ anion was used. The effects of geometrical variations in the building blocks are also evident on using Jahn-Teller-distorted divalent Cu(II) ions or regular octahedral species based on Zn(II) ions. The second-sphere effects on the stabilization of the compounds are illustrated by TGA experiments.     

Stepwise formation of metallo-prisms of iridium and rhodium complexes bearing pentamethylcyclopentadienyl ligands

Reactions of [M(Cp^∗)Cl(μ-Cl)]₂ (M = Ir(1a); M = Rh(1b)) with tridentate ligands tpt (tpt = 2,4,6-tripyridyl-1,3,5-triazine) gave the corresponding trinuclear complexes [M₃(Cp^∗)₃(μ₃-4-tpt-κN)Cl₆] (M = Ir(2a); M = Rh(2b)), which can be converted into hexanuclear complexes [M₆(Cp^∗)₆(μ₃-4-tpt-κN)₂(μ-Cl)₆](O₃SCF₃)₆ (M = Ir(3a); M = Rh(3b)) by treatment with AgO₃SCF₃, respectively. X-ray of 3b revealed that each of six pentamethylcyclopentadienyl metal moieties was connected by two μ-Cl-bridged atoms and a tridentate ligand to construct a cation triangular metallo-prism cavity with the volume of about 273 Å³ based on the distance of the two triazine moieties is 3.62 Å.     

Sensitive and robotic determination of bromate in sea water and drinking deep-sea water by headspace solid-phase micro extraction and gas chromatography–mass spectrometry

A robotic method has been established for the determination of bromate in sea water and drinking deep-sea water. Bromate in water was converted into volatile derivative, which was measured with headspace solid-phase micro extraction and gas chromatography–mass spectrometry (HS-SPME GC–MS). Derivatization reagent and the HS-SPME parameters (selection of fibre, extraction/derivatization temperature, heating time and; the morality of HCl) were optimized and selected. Under the established conditions, the detection and the quantification limits were 0.016 μg L⁻¹ and 0.051 μg L⁻¹, respectively, and the intra- and inter-day relative standard deviation was less than 7% at concentrations of 1.0 and 10.0 μg L⁻¹. The calibration curve showed good linearity with r² = 0.9998. The common ions Cl⁻, NO₃⁻, SO₄²⁻, HPO₄²⁻, H₂PO₄⁻, K⁺, Na⁺, NH₄⁺, Ca²⁺, Mg²⁺, Ba²⁺, Mn⁴⁺, Mn²⁺, Fe³⁺ and Fe²⁺ did not interfere even when present in 1000-fold excess over the active species. The method was successfully applied to the determination of bromate in sea water and drinking deep-sea water.