Solvent-dependent formation of two different Cd(II) complexes with p-BrC6H4C(S)NHP(O)(OiPr)2 (HL). Crystallographic modification of Cd(HL)2L2

Reaction of the potassium salt of N-(diisopropoxyphosphoryl)-p-bromothiobenzamide p-BrC₆H₄C(S)NHP(O)(OiPr)₂ (HL) with Cd(II) cations in freshly dried and distilled EtOH leads exclusively to the complex [Cd(p-BrC₆H₄C(S)NH₂-S)(L-O,S)₂] ([Cd(L^I)L₂]), while the same reaction in H₂O leads to the complex [Cd(HL-O)₂(L-O,S)₂] ([Cd(HL)₂L₂]). The corresponding reactions with Zn(II) always lead to the complex [Zn(L-O,S)₂] ([ZnL₂]) regardless of the solvent. The crystal structure of [Cd(HL)₂L₂]^.2/3H₂O reveals to be a polymorph to the previously reported anhydrous [Cd(HL)₂L₂].     

Reactivity of 2,3-bis(2-pyridyl)pyrazine with [Re2(CO)8(CH3CN)2]: Molecular structures of [Re2(CO)8(C14H10N4)] and [Re2(CO)8(C14H10N4)Re2(CO)8]

The reaction of the labile compound [Re₂(CO)₈(CH₃CN)₂] with 2,3-bis(2-pyridyl)pyrazine in dichloromethane solution at reflux temperature afforded the structural dirhenium isomers [Re₂(CO)₈(C₁₄H₁₀N₄)] (1 and 2), and the complex [Re₂(CO)₈(C₁₄H₁₀N₄)Re₂(CO)₈] (3). In 1, the ligand is σ,σ′-N,N′-coordinated to a Re(CO)₃ fragment through pyridine and pyrazine to form a five-membered chelate ring. A seven-membered ring is obtained for isomer 2 by N-coordination of the 2-pyridyl groups while the pyrazine ring remains uncoordinated. For 2, isomers 2a and 2b are found in a dynamic equilibrium ratio [2a]/[2b]  =  7 in solution, detected by ¹H NMR (−50 °C, CD₃COCD₃), coalescence being observed above room temperature. The ligand in 3 behaves as an 8e-donor bridge bonding two Re(CO)₃ fragments through two (σ,σ′-N,N′) interactions. When the reaction was carried out in refluxing tetrahydrofuran, complex [Re₂(CO)₆(C₁₄H₁₀N₄)₂] (4) was obtained in addition to compounds 1-3. The dinuclear rhenium derivative 4 contains two units of the organic ligand σ,σ′-N,N′-coordinated in a chelate form to each rhenium core. The X-ray crystal structures for 1 and 3 are reported.     

Synthesis and characterization of some novel cadmium(II) complexes with 3-hydroxypicolinic acid (3-OHpicH): Crystal and molecular structures of [CdI(3-OHpic)(3-OHpicH)(H2O)]2, [Cd(3-OHpic)2(H2O)2] and [Cd(3-OHpic)2]n

Cadmium(II) complexes of 3-hydroxypicolinic acid, namely [CdI(3-OHpic)(3-OHpicH)(H₂O)]₂ (1), [Cd(3-OHpic)₂(H₂O)₂] (2) and [Cd(3-OHpic)₂]_n (3) were prepared and characterized by spectroscopic methods (IR, NMR) and their molecular and crystal structures were determined by X-ray crystal structure analysis. Complexes 1 and 2 were prepared in similar reaction conditions using different cadmium(II) salts: cadmium(II) iodide and cadmium(II) acetate dihydrate, respectively, while 3 was prepared by recrystallization of 2 from N,N-dimethylformamide solution. Various coordination modes of 3-OHpicH in 1–3 were established in the solid state: bidentate N,O-chelated mode in 1 and 2, monodentate mode through the carboxylate O atom from zwitterionic ligand in 1 and bidentate N,O-chelated and bridging mode in 3. In the DMF solution of all prepared complexes, only monodentate mode of 3-OHpicH binding to cadmium(II) through the carboxylate O atom was established by ¹H, ¹³C, ¹⁵N and ¹¹³Cd NMR spectroscopy.     

Syntheses and X-ray crystallographic studies of {[Ni(en)2(pot)2]0.5CHCl3} and [Ni(en)2](3-pytol)2

Two novel Ni(II) complexes {[Ni(en)₂(pot)₂]0.5CHCl₃} (3) {pot = 5-phenyl-1,3,4-oxadiazole-2-thione} (1) and [Ni(en)₂](3-pytol)₂ (4) {3-pytol = 5-(3-pyridyl)-1,3,4-oxadiazole-2-thiol} (2) have been synthesized using en as coligand. The metal complexes have been characterized by physical and analytical techniques and also by single crystal X-ray studies. The complexes 3 and 4 crystallize in monoclinic system with space group P21/a and P121/c, respectively. The complex 3 has a slightly distorted octahedral geometry with trans (pot)⁻ ligands while 4 has a square planar geometry around the centrosymmetric Ni(II) center with ionically linked trans (3-pytol)⁻ ligands. The π?π (face to face) interaction plays an important role along with hydrogen bondings to form supramolecular architecture in both complexes.     

Preparation and structural characterization of [RuCl2(CO)2{Te(CH2SiMe3)2}2] and [RuCl2(CO){Te(CH2SiMe3)2}3]

The objective of the present work was to synthesize mononuclear ruthenium complex [RuCl₂(CO)₂{Te(CH₂SiMe₃)₂}₂] (1) by the reaction of Te(CH₂SiMe₃)₂ and [RuCl₂(CO)₃]₂. However, the stoichiometric reaction affords a mixture of 1 and [RuCl₂(CO){Te(CH₂SiMe₃)₂}₃] (2). The X-ray structures show the formation of the cis(Cl), cis(C), trans(Te) isomer of 1 and the cis(Cl), mer(Te) isomer of 2. The ¹²⁵Te NMR spectra of the complexes are reported. The complex distribution depends on the initial molar ratio of the reactants. With an excess of [RuCl₂(CO)₃]₂ only 1 is formed. In addition to the stoichiometric reaction, a mixture of 1 and 2 is observed even when using an excess of Te(CH₂SiMe₃)₂. Complex 1 is, however, always the main product. In these cases the ¹²⁵Te NMR spectra of the reaction solution also indicates the presence of unreacted ligand.     

Synthesis and spectral characterization of mercury(II) complexes with the bidentate Schiff base ligand N,N′-bis(2,3-dimethoxybenzylidene)-1,2-diaminoethane: The crystal structures of [Hg((23-MeO-ba)2en)I2] and [Hg((23-MeO-ba)2en)Br2]

Three mercury(II) complexes, [Hg((23-MeO-ba)₂en)X₂] (X = I (1), Br (2) and Cl(3)), and the ligand (23-MeO-ba)₂en ((23-MeO-ba)₂en = N,N′-bis(2,3-dimethoxybenzylidene)-1,2-diaminoethane) have been synthesized and characterized by elemental analyses, FT-IR and ¹H NMR spectroscopy. The crystal and molecular structures of 1 and 2 were determined by X-ray crystallography from single-crystal data. The metal-to-ligand ratio was found to be 1:1. The mercury(II) center in 1 and 2 has a distorted tetrahedral geometry with HgN₂I₂ and HgN₂Br₂ chromophores, respectively. The Schiff base ligand (23-MeO-ba)₂en acts as a chelating ligand, coordinating via the two nitrogen atoms to the mercury(II) center, and it adopts an E,E conformation. The coordination sphere of the mercury(II) center in 1 and 2 is completed by the two I and Br atoms, respectively. In complex 1 an inter-molecular non-classical hydrogen bond of the type C-H?O was found, while in complex 2 inter- and intra-molecular non-classical hydrogen bonds of the type C-H?X (X = O and Br) were found. The ¹H NMR spectra of the complexes exhibit downfield as well as upfield shifts of the free ligand resonances, reflecting changes in the ligand’s geometry during its coordination.     

Syntheses, crystal structures, and characterization of As(III) and As(V) thioarsenates, [Mn2(phen)(As2S5)]n and [Mn3(phen)3(AsS4)2]n·nH2O

The hydrothermal reactions of As, Mn, S, phen (phen=1,10-phenanthroline), and en (en=ethylenediamine) yield two manganese As(III) and As(V) thioarsenates, [Mn₂(phen)(As^III₂S₅)]_n (1) and [Mn₃(phen)₃(As^VS₄)₂]_n·nH₂O (2), respectively. Single-crystal X-ray diffraction analyses reveal that compound 1 is a two-dimensional (2D) layer of (6,3) topology. The 18-membered rings within the 2D porous layers are formed by corner-, edge-, and face-sharing cubane-like [Mn₂As₂S₄] units along the [100] direction. Whereas compound 2 is a one-dimensional (1D) chain structure. They are both characterized by IR, elemental analysis, EDS, and X-ray powder diffraction. The thermogravimetric analysis of 1 and 2 are discussed. Both the compounds are semiconductors with the band gap of E_g (compound 1)=2.01 eV (617 nm) and E_g (compound 2)=1.97 eV (629 nm), respectively. In addition, the variable-temperature magnetic susceptibility data suggest weak antiferromagnetic interactions between the Mn²⁺ ions in these two compounds.     

The first non-acetato members of the bis(anion)octacarboxylatotetrakis{di-2-pyridyl-methanediolate(−2)}enneametal(II) family of complexes: Synthesis, X-ray structures and magnetism of [M9(N3)2(O2CCMe3)8{(py)2CO2}4] (M = Co, Ni)

The combined use of di-2-pyridyl ketone [(py)₂CO] and azides (N₃⁻) in nickel(II) and cobalt(II) pivalate chemistry has afforded complexes [Ni₉(N₃)₂(O₂CCMe₃)₈{(py)₂CO₂}₄] (1) and [Co₉(N₃)₂(O₂CCMe₃)₈{(py)₂CO₂}₄] (2), where (py)₂CO₂²⁻ is the gem-diolate(−2) form of (py)₂CO. The complexes are isostructural and crystallize in the monoclinic P2₁/c space group. Their molecular structures consist of nine metal(II) ions, eight of which are arranged as two parallel squares flanking the ninth. DC magnetic susceptometry on powdered samples of 1 (1-p) reveal an overall antiferromagnetic behavior, leading to an S = 0 ground state. AC susceptometry reveals out-of-phase signals between 10 and 27 K, and ZFC and FC experiments show a divergence of the two curves below ∼27 K. Magnetization-decay and field-sweep experiments verify the relaxation behavior of the sample. Samples of the complex arising from carefully washed single crystals (1-cr) reveal a similar DC behavior, without however the appearance of cusps in the χ_ΜΤ versus T curves, and no relaxation. The relaxation behavior has been assigned to NiO impurities. The results illustrate the extreme care that should be taken when examining the magnetic properties of apparently analytically pure materials obtained under heating. Complex 2 exhibits an overall antiferromagnetic behavior, without observation of any relaxation phenomena.     

A family of three-dimensional porous coordination polymers with general formula (Kat)2[{M(H2O)n}3{Re6Q8(CN)6}2]·xH2O (Q=S, Se; n=1.5, 2)

The X-ray crystal structures of a series of new compounds (H₃O)₂[{Mn(H₂O)_1.5}₃{Re₆Se₈(CN)₆}₂]·19H₂O (1), (Me₄N)₂[{Co(H₂O)_1.5}₃{Re₆S₈(CN)₆}₂]·13H₂O (2), (Me₄N)₂[{Co(H₂O)_1.5}₃{Re₆Se₈(CN)₆}₂]·3H₂O (3), (Et₄N)₂[{Mn(H₂O)₂}₃{Re₆Se₈(CN)₆}₂]·6.5H₂O (4), (Et₄N)₂[{Ni(H₂O)₂}₃{Re₆S₈(CN)₆}₂]·6.5H₂O (5), and (Et₄N)₂[{Co(H₂O)₂}₃{Re₆S₈(CN)₆}₂]·10H₂O (6) are reported. All six compounds are isostructural crystallizing in cubic space group with four formulae per unit cell. For compounds 1, 3-5 the following parameters were found: (1) a=19.857(2) Å, R1=0.0283; (3 at 150 K) a=19.634(1) Å, R1=0.0572; (4) a=20.060(2) Å, R1=0.0288; (5) a=19.697(2) Å, R1=0.0224. The structures consist three-dimensional cyano-bridged framework formed by cyano cluster anions [Re₆Q₈(CN)₆]⁴⁻, Q=S, Se and transition metal cations, M²⁺=Mn²⁺, Co²⁺, Ni²⁺. Water molecules and large organic cations Me₄N⁺ and Et₄N⁺ are included in cavities of this framework. Porosity of the framework, its ability to accommodate different cations and water molecules by little changes in the structure, as well as distortion of coordination framework under loss of water of crystallization is discussed.     

Synthesis and characterization of palladium(II) complexes with chiral aminophosphine ligands: Catalytic behaviour in asymmetric hydrovinylation. Crystal structure of cis-[PdCl2(PPh((R)-NHCHCH3Ph)2)2]

Optically active ligands of type Ph₂PNHR (R = (R)-CHCH₃Ph, (a); (R)-CHCH₃Cy, (b); (R)-CHCH₃Naph, (c)) and PhP(NHR)₂ (R = (R)-CHCH₃Ph, (d); (R)-CHCH₃Cy, (e)) with a stereogenic carbon atom in the R substituent were synthesized. Reaction with [PdCl₂(COD)₂] produced [PdCl₂P₂] (1) (P = PhP(NHCHCH₃Ph)₂), whose molecular structure determined by X-ray diffraction showed cis disposition for the ligands. All nitrogen atoms of amino groups adopted S configuration. The new ligands reacted with allylic dimeric palladium compound [Pd(η³-2-methylallyl)Cl]₂ to gave neutral aminophosphine complexes [Pd(η³-2-methylallyl)ClP] (2a-2e) or cationic aminophosphine complexes [Pd(η³-2-methylallyl)P₂]BF₄ (3a-3e) in the presence of the stoichiometric amount of AgBF₄. Cationic complexes [Pd(η⁴3-2-methylallyl)(NCCH₃)P]BF₄ (4a-4e) were prepared in solution to be used as precursors in the catalytic hydrovinylation of styrene. ³¹P NMR spectroscopy showed the existence of an equilibrium between the expected cationic mixed complexes 4, the symmetrical cationic complexes [Pd(η³-2-methylallyl)P₂]BF₄ (3) and [Pd(η³-2-methylallyl)(NCCH₃)₂]BF₄ (5) coming from the symmetrization reaction. The extension of the process was studied with the aminophosphines (a-e) as well as with nonchiral monodentate phosphines (PCy₃ (f), PBn₃ (g), PPh₃ (h), PMe₂Ph (i)) showing a good match between the extension of the symmetrization and the size of the phosphine ligand. We studied the influence of such equilibria in the hydrovinylation of styrene because the behaviour of catalytic precursors can be modified substantially when prepared ‘in situ’. While compounds 3 and bisacetonitrile complex 5 were not active as catalysts, the [Pd(η³-2-methylallyl)(η²-styrene)₂]⁺ species formed in the absence of acetonitrile showed some activity in the formation of codimers and dimers. Hydrovinylation reaction between styrene and ethylene was tested using catalytic precursors solutions of [Pd(η³-2-methylallyl)LP]BF₄ ionic species (L = CH₃CN or styrene) showing moderate activity and good selectivity. Better activities but lower selectivities were found when L = styrene. Only in the case of the precursor containing Ph₂PNHCHCH₃Ph (a) ligand was some enantiodiscrimination (10%) found.     

Hydrolytic cleavage of Schiff bases by [RuCl2(DMSO)4]

New hexa-coordinated Ru(II) complexes of the type [RuCl₂(DMSO)₂(diamine)] (diamine = o-phenylenediamine and ethylenediamine) have been prepared by reacting cis-[RuCl₂(DMSO)₄] with Schiff bases (H₂sal-en, 1; H₂nap-en, 2; H₂sal-o-pdn, 3; H₂nap-o-pdn, 4) in a 1:1 ratio. The ligands, which were expected to act as tetradentate (N₂O₂) chelates under the normal reaction conditions, were found to undergo hydrolytic cleavage to form the diamine and the corresponding aldehyde. All the complexes have been characterized by analytical and spectroscopic (IR, electronic and¹H NMR) data. Single-crystal X-ray analysis of the complex [RuCl₂(DMSO)₂(o-pndn)] revealed that the coordination environment around the ruthenium metal consists of a N₂S₂Cl₂ octahedron.     

ESR and pH-potentiometric study of the mixed-ligand complex formation in the copper(II)-4-fluorosalicylic acid-N,N-diethylnicotinamide system: Structure and spectral properties of [Cu(4-fluorosalicylate)2(N,N-diethylnicotinamide)2(H2O)2] complex

EPR simulation method together with pH-potentiometry combined with UV-Vis spectrophotometry were used for the study of the ternary system 4-fuorosalicylic acid (HA)-N,N-diethylnicotinamide (B)-copper(II) in aqueous solution. The N,N-diethylnicotinamide ligand is a weak donor, its mixed-ligand complexes with 4-fluorosalicylate anions are more favoured. The number of coordinated N,N-diethylnicotinamide molecules increases with decreasing temperature: up to four ones were detected in the coordination sphere of copper(II) in frozen solutions. The formation of [CuH₋₁AB₂] and [CuH₋₁A] was detected by all methods at neutral pH. At lower pH values, [CuA₂B₂] and [CuB] become dominant, and this fact is in good agreement with [CuA₂B₂(H₂O)₂] crystals obtained from similar solutions. The structural unit of the [CuA₂B₂(H₂O)₂] complex consists of a copper(II) ion, which is monodentately coordinated by a pair of 4-fluorosalicylate anions and by a pair of N,N-diethylnicotinamide in trans positions in the basal plane, and by two water molecules in the axial positions of a tetragonal bipyramid.     

4,5-Bis[(triorganotin)thiolato]-1,3-dithiole-2-thione, (R3Sn)2(dmit), 4,5-bis[(triorganotin)thiolato]-1,3-dithiole-2-one, (R3Sn)2(dmio), compounds: Crystal structures of (cyclohexyl3Sn)2(dmio), (Ph3Sn)2(dmit) and (Ph3Sn)2(dmio)

The synthesis and crystal structures of 4,5-bis[(triorganotin)thiolato]-1,3-dithiole-2-thione, (R₃Sn)₂(dmit), 1, and 4,5-bis[(triorganotin)thiolato]-1,3-dithiole-2-one, (R₃Sn)₂(dmio), 2, compounds are reported. Compounds, (1 or 2: R = Ph or cyclohexyl, Cy), have been obtained from reaction of R₃SnCl with Cs₂dmit or Na₂dmio. The presence of the two tin centres in (2: R = Ph) is shown in the ¹³C NMR spectrum by the couplings of both Sn atoms to the dmio olefinic carbons with J values of 29.4 and 24.7 Hz. The δ¹¹⁹ Sn values for (1: R = Ph) and (2: R = Ph) differ by about 30 ppm, values being −20.7 and −50.1 ppm, respectively, in CDCl₃ solution. X-ray structure determinations for (1: R = Ph) and (2: R = Ph or Cy) reveal the compounds to have 4-coordinate, distorted tetrahedral tin centres. The dithiolato ligands, dmit and dmio, act as bridging ligands, in contrast to their chelating roles in R₂Sn(dmit) and R₂Sn(dmio). A further difference between R₂Sn(dmit) and R₂Sn(dmio), on one hand, and 1 and 2 on the other, is that intermolecular Sn-S and Sn-O interactions are absent in 1 and 2. However, weak intermolecular hydrogen bonding interactions are found in (1: R = Ph) [C-H?π] and in (2: R = Ph) [C-H?π and C-H?O].     

Convenient syntheses of fluorous phenols of the formula HOC6H5−n((CH2)3(CF2)7CF3)n (n=1, 2) and the corresponding triarylphosphites

The aldehydic benzyl ethers PhCH₂OC₆H₄CHO (2; a/b = para/meta series) are readily available from the corresponding phenols and react with Wittig reagents derived from [Ph₃PCH₂CH₂R_f8]⁺I⁻ (R_f8=(CF₂)₇CF₃) to give PhCH₂OC₆H₄CHCHCH₂R_f8 (86-93%, Z major). Reactions with H₂ over Pd/C give the fluorous phenols HOC₆H₄(CH₂)₃R_f8(4a,b; 87-91%). Condensations with PCl₃ and NEt₃ (3.0:1.0:3.3 mol ratio) give the fluorous phosphites P[OC₆H₄(CH₂)₃R_f8]₃(5a,b; 92-94%), but traces of 4a,b are difficult to remove. The phthalate-based benzyl ethers PhCH₂OC₆H₃(COOR)₂ (7; ,5/3,4 OC₆H₃-3,n-(R)₂ series) are easily accessed and reduced with LiAlH₄ to the diols PhCH₂OC₆H₃(CH₂OH)₂(8c,d; 89-90%). Diol 8c and the Dess-Martin periodinane react to give the dialdehyde PhCH₂OC₆H₃(CHO)₂ (9c; 95%). This is elaborated by a sequence analogous to 2→4→5 to the fluorous phenol HOC₆H₃((CH₂)₃R_f8)₂ (11c; 97%/96%, two steps) and phosphite P[OC₆H₃((CH₂)₃R_f8)₂]₃ (12c, 92%), from which traces of 11c are difficult to remove. Diol 8d can be similarly elaborated to 11d, but the dialdehyde 9d is labile and the combined yield of the Dess-Martin/Wittig steps is 32%. The CF₃C₆F₁₁/toluene partition coefficients of 11c,d, and 12c (two pony tails; 70:30, 72:28, 92:8) are much higher than those of 4a and b (one pony tail; 12:88, 14:86).     

Novel octahedral nickel(II) dithiocarbamates with bi- or tetradentate N-donor ligands: X-ray structures of [Ni(Bzppzdtc)(phen)2]ClO4 · CHCl3 and [Ni(Bz2dtc)2(cyclam)]

A series of novel octahedral nickel(II) dithiocarbamate complexes involving bidentate nitrogen-donor ligands (phen = 1,10-phenanthroline, bpy = 2,2′-bipyridine) or a tetradentate ligand (cyclam = 1,4,8,11-tetraazacycloteradecane) of the composition [Ni(BzMetdtc)(phen)₂]ClO₄ (1), [Ni(Pe₂dtc)(phen)₂]ClO₄ (2), [Ni(Bzppzdtc)(phen)₂]ClO₄ · CHCl₃ (3), [Ni(Bzppzdtc)(phen)₂](SCN) (4), [Ni(BzMetdtc)(bpy)₂]ClO₄ · 2H₂O (5), [Ni(Pe₂dtc)(cyclam)]ClO₄ (6), [Ni(BzMetdtc)₂(cyclam)] (7), [Ni(Bz₂dtc)₂(cyclam)] (8) and [Ni(Bz₂dtc)₂(phen)] (9) (BzMetdtc = N,N-benzyl-methyldithiocarbamate(1-) anion, Pe₂dtc = N,N-dipentyldithiocarbamate(1-) anion, Bz₂dtc = N,N-dibenzyldithiocarbamate(1-) anion, Bzppzdtc = 4-benzylpiperazinedithiocarbamate(1-) anion), have been synthesized. Spectroscopic (electronic and infrared), magnetic moment and molar conductivity data, and thermal behaviour of the complexes are discussed. Single crystal X-ray analysis of 3 and 8 confirmed a distorted octahedral arrangement in the vicinity of the nickel atom with a N₄S₂ donor set. They represent the first X-ray structures of such type complexes. The catalytic influence of complexes 2, 3, 6, and 7 on graphite oxidation was studied and discussed.     

Synthesis and characterisation of six Fe(II or III), Co(II) or Zr(IV) complexes containing the ligand [CH(SiMe2R)P(Ph)2NSiMe3] (R = Me, NEt2) and of [Co{N(SiMe3)C(Ph)C(H)P(Ph)2NSiMe3}2]

The C,N-(trimethylsilyliminodiphenylphosphoranyl)silylmethylmetal complexes [Fe(L)₂] (3), [Co(L)₂] (4), [ZrCl₃(L)]·0.83CH₂Cl₂ (5), [Fe(L)₃] (6), [Fe(L′)₂] (7) and [Co(L′)₂] (8) have been prepared from the lithium compound Li[CH(SiMe₂R)P(Ph)₂NSiMe₃] [1a, (R = Me) {≡ Li(L)}; 1b, (R = NEt₂) {≡ Li(L′)}] and the appropriate metal chloride (or for 7, FeCl₃). From Li[N(SiMe₃)C(Ph)C(H)P(Ph)₂NSiMe₃] [≡ Li(L″)] (2), prepared in situ from Li(L) (1a) and PhCN, and CoCl₂ there was obtained bis(3-trimethylsilylimino- diphenylphosphoranyl-2-phenyl-N-trimethylsilyl-1-azaallyl-N,N′)cobalt(II) (9). These crystalline complexes 3-9 were characterised by their mass spectra, microanalyses, high spin magnetic moments (not 5) and for 5 multinuclear NMR solution spectra. The X-ray structure of 3 showed it to be a pseudotetrahedral bis(chelate), the iron atom at the spiro junction.     

Synthesis,crystal structure and magnetic properties of the helical oxalate-bridged copper(II) chain {[(CH3)4N]2[Cu(C2O4)2] · H2O}n

The preparation, crystal structure and magnetic properties of a new oxalate-containing copper(II) chain of formula {[(CH₃)₄N]₂[Cu(C₂O₄)₂] · H₂O}_n (1) [(CH₃)₄N⁺ = tetramethylammonium cation] are reported. The structure of 1 consists of anionic oxalate-bridged copper(II) chains, tetramethylammoniun cations and crystallization water molecules. Each copper(II) ion in 1 is surrounded by three oxalate ligands, one being bidentate and the other two exhibiting bis-bidenate coordination modes. Although all the tris-chelated copper(II) units from a given chain exhibit the same helicity, adjacent chains have opposite helicities and then an achiral structure results. Variable-temperature magnetic susceptibility measurements of 1 show the occurrence of a weak ferromagnetic interaction through the oxalate bridge [J = +1.14(1) cm⁻¹, the Hamiltonian being defined as H = –J ∑_nmS_i · S_j]. This value is analyzed and discussed in the light of available magneto-structural data for oxalate-bridged copper(II) complexes with the same out-of-plane exchange pathway.     

Effect of ketimide ligand for ethylene polymerization and ethylene/norbornene copolymerization catalyzed by (cyclopentadienyl)(ketimide)titanium complexes-MAO catalyst systems: Structural analysis for CpTiCl2(NCPh2)

Ligand effects on the catalytic activity [and norbornene (NBE) incorporation] for both ethylene polymerization and ethylene/NBE copolymerization using half-titanocenes (titanium half-sandwich complexes) containing ketimide ligand of type Cp′TiCl₂[NC(R¹)R²] [Cp′ = Cp (1), C⁵Me⁵ (Cp^∗, 2); R¹,R² = ^tBu,^tBu (a), ^tBu,Ph (b), Ph,Ph (c)]-methylaluminoxane (MAO) catalyst systems have been investigated. CpTiCl₂[NC(^tBu)Ph] (1b) CpTiCl₂(NCPh₂) (1c), and Cp^∗TiCl₂(NCPh₂) (2c) were prepared and identified; the structure of Cp^∗TiCl₂(NCPh₂) (2c) was determined by X-ray crystallography. The catalytic activity for ethylene polymerization increased in the order: 1a > 1b > 1c, suggesting that an electronic nature of the ketimide ligand affects the activity. However, molecular weight distributions for resultant (co)polymers prepared by 1b,c and by 2c-MAO catalyst systems were bi- or multi-modal, suggesting that the ketimide substituent plays a key role in order for these (co)polymerizations to proceed with single catalytically-active species. CpTiCl₂(NC^tBu₂) (1a) exhibited both remarkable catalytic activity and efficient NBE incorporation for ethylene/NBE copolymerization.     

Syntheses of platinum(II) complexes of cyclo-octenyl group and isolation of a self-assembled oxo-bridged macrocyclic complex [Pt4(Spy)4(C8H12-O-C8H12)2]

Reactions of [Pt₂(μ-Cl)₂(C₈H₁₂OMe)₂] (1) (C₈H₁₂OMe = 8-methoxy-cyclooct-4-ene-1-yl) with various anionic chalcogenolate ligands have been investigated. The reaction of 1 with Pb(Spy)₂ (HSpy = pyridine-2-thiol) yielded a binuclear complex [Pt₂(Spy)₂(C₈H₁₂OMe)₂] (2). A trinuclear complex [Pt₃(Spy)₄(C₈H₁₂OMe)₂] (3) was isolated by a reaction between 2 and [Pt(Spy)₂]_n. The reaction of 1 with HSpy in the presence of NaOMe generated 2 and its demethylated oxo-bridged tetranuclear complex [Pt₄(Spy)₄(C₈H₁₂-O-C₈H₁₂)₂] (4). Treatment of 1 with ammonium diisopropyldithiophosphate completely replaced C₈H₁₂OMe resulting in [Pt(S₂P{OPrⁱ}₂)₂] (5), whereas non-rigid 5-membered chelating ligand, Me₂NCH₂CH₂E⁻, produced mononuclear complexes [Pt(ECH₂CH₂NMe₂)(C₈H₁₂OMe)] (E = S (6), Se (7)). These complexes have been characterized by elemental analyses, NMR (¹H, ¹³C{¹H}, ¹⁹⁵Pt{¹H}) and absorption spectroscopy. Molecular structures of 2, 3, 4, 5 and 7 were established by single crystal X-ray diffraction analyses. Thermolysis of 2, 6 and 7 in HDA gave platinum nanoparticles.