Ruthenium complexes that incorporate a chiro-inositol derived diphosphinite ligand as catalysts for asymmetric hydrogenation reactions

The diol, 1d-1,2,5,6-tetra-O-methyl-chiro-inositol (D-9), can be conveniently prepared from 1d-chiro-inositol using a series of standard protection/deprotection steps. Treatment of D-9 with Ph₂PCl gives the chiral diphosphinite, 1d-3,4-bis(O-diphenylphosphino)-1,2,5,6-tetra-O-methyl-chiro-inositol (D-10). The structure of D-10 has been determined by X-ray crystallography. Using 1l-chiro-inositol as starting material and following the same synthetic sequence used to produce D-10, the other enantiomer of this diphosphinite, 1l-3,4-bis(O-diphenylphosphino)-1,2,5,6-tetra-O-methyl-chiro-inositol (L-10) can also be obtained. Ruthenium complexes of these diphosphinite ligands can be conveniently prepared through ligand substitution reactions with appropriate substrate complexes. Thus, treatment of [RuCl₂(COD)]_n with D-10 in the presence of triethylamine produces the bis(diphosphinite) complex, RuHCl{κ²(P,P)-1d-3,4-bis(O-diphenylphosphino)-1,2,5,6-tetra-O-methyl-chiro-inositol}₂ (11). In addition, reaction between RuCl₂(PPh₃)₃, D-10 and (1R,2R)-(+)-1,2-diphenylethylenediamine gives the mono(diphosphinite) complex, RuCl₂{κ²(P,P)-1d-3,4-bis(O-diphenylphosphino)-1,2,5,6-tetra-O-methyl-chiro-inositol}{κ²(N,N)-(1R,2R)-(+)-1,2-diphenylethylenediamine} (12). The closely related complex RuCl₂{κ²(P,P)-1d-3,4-bis(O-diphenylphosphino)-1,2,5,6-tetra-O-methyl-chiro-inositol}{κ²(N,N)-(1S,2S)-(−)-1,2-diphenylethylenediamine} (13) can be obtained in a similar manner using (1S,2S)-(−)-1,2-diphenylethylenediamine in place of the corresponding (+)-isomer. These new chiral, diphosphinite complexes catalyse the hydrogenation of the ketones acetophenone and 3-quinuclidinone to give the corresponding alcohols with low to moderate enantiomeric excesses. The complexes are not catalytically active for the hydrogenation of the olefin dimethylitaconate or the α-ketoester methyl benzoylformate.     

Efficient syntheses of optically pure chiro- and allo-inositol derivatives, azidocyclitols and aminocyclitols from myo-inositol

Efficient routes for the syntheses of optically pure and hitherto unknown l-chiro- and d-allo-inositol derivatives, azido- and aminocyclitols of l-chiro-configuration, diazido- and diaminocyclitols of d-allo-configuration from economically viable myo-inositol are described. These routes provide access to synthetically flexible 1,2:4,5-di-O-isopropylidene-chiro-inositol and 1,6:3,4-di-O-isopropylidene-allo-inositol, which are otherwise difficult to synthesize directly from their parent inositols. A one pot methodology that allows rapid access to both chiro- and allo-inositol derivatives has also been developed. Investigations on the glycosidase inhibitory properties of these novel azido- and amino-inositols unraveled the potentials of these classes of compounds as novel class of glycosidase inhibitors. Both d and l forms of these cyclitols could be synthesized from myo-inositol in gram scales and hence by exploiting the difference in reactivities of cis- and trans-ketals, a variety of protected derivatives, which are useful for the synthesis of unnatural phosphoinositols and natural products, can be synthesized.     

BINAP: rhodium–diolefin complexes in asymmetric hydrogenation

The complexes [Rh((S)-BINAP)(COD)]BF₄ 1, [Rh((S)-BINAP)(NBD)]BF₄ 2, [Rh((R)-BINAP)(COD)]OTf 3, [Rh((R)-BINAP)(NBD)]OTf 4, and [Rh((R)-BINAP)(COD)]BArF 5 were synthesized, and 1–4 were analyzed by single crystal X-ray crystallography. The transformation of these precatalysts into hydrogenation-active species was investigated as well as the hydrogenation of prochiral olefins. In particular, this series of transformations was investigated with regard to solvent and counterions.     

Strategy for synthesis of the isoleucine conjugate of epi-jasmonic acid

The TES ether of 2-((1R,2S,3R)-3-hydroxy-2-((Z)-pent-2-enyl)cyclopentyl)acetic acid (5, equal to the reduction product of epi-jasmonic acid) derived from (1R,4S)-4-hydroxycyclopent-2-enyl acetate (19) in 13 steps was activated by using isobutyl chloroformate and was subjected to condensation with isoleucine at room temperature for 48 h. The product was desilylated and oxidized to the isoleucine conjugate of epi-jasmonic acid in 68% yield over three steps. Similarly, allo-isoleucine conjugate of epi-jasmonic acid and three isoleucine conjugates of ent-epi-jasmonic acid, jasmonic acid, and ent-jasmonic acid were synthesized.     

Convenient access to both enantiomers of new azido- and aminoinositols via a chemoenzymatic route

1,2-diacetylconduritol E, (±)-1, through complementary use of Mucor miehei (Lipozyme^® IM) and Candida cylindracea lipases, affords (1S)-1,2-diacetylconduritol E, (+)-1, (1R)-1,2-diacetylconduritol E, (−)-1, (1S)-1,2,4-triacetylconduritol E, (+)-2, (1R)-1,2,4-triacetylconduritol E, (−)-2, with high enantiomeric excesses and chemical yields. Following two different methods, diester (+)-1 has been transformed into azidoinositol (−)-4 to give 1L-4-amino-4-deoxy-chiro-inositol, whereas triester (−)-2 furnished the azidoinositol (+)-13, easily converted into 1L-4-amino-4-deoxy-myo-inositol.     

Asymmetric cyano-ethoxycarbonylation of aldehydes catalyzed by self-assembled titanium catalyst

A new self-assembled catalyst based on titanium complex has been developed for the effective enantioselective cyano-ethoxycarbonylation of aldehydes. The self-assembled catalyst was readily prepared from (R)-3,3′-bis((methyl((S)-1-phenylethyl)amino)methyl)-1,1′-binaphthyl-2,2′-diol (1h), N-((1S,2R)-2-hydroxy-1,2-diphenylethyl)acetamide (2b), and tetraisopropyl titanate (Ti(OiPr)₄). A variety of aromatic aldehydes, aliphatic aldehydes, and α,β-unsaturated aldehydes were found to be suitable substrates in the presence of the self-assembled titanium catalyst (5 mol % 1h, 5 mol % 2b, and 5 mol % Ti(OiPr)₄). The desired cyanohydrin ethyl carbonates were afforded with high isolated yields (up to 95%) and moderate to good enantioselectivities (up to 92% ee) under mild conditions (at −15 °C). A possible catalytic cycle based on the experimental observation was proposed.     

Regio- and stereospecific synthesis of dl-4,5-dibromo-4,5-dideoxy-3,6-O-methyl-chiro-inositol

The regio- and stereospecific synthesis of dl-4,5-dibromo-4,5-dideoxy-3,6-O-methyl-chiro-inositol is reported. Bromination of p-benzoquinone followed by reduction of the carbonyl groups with NaBH₄ gave the corresponding trans-dibromodiol compound, which was reacted with sodium methoxide to produce dimethoxy conduritol-B. Regiospecific bromination of the alkene moiety furnished the desired chiro-inositol derivative.     

Efforts towards the synthesis of microsporin B: ready access to both the enantiomers of the key amino acid fragment

Both the isomers methyl-(2S,8R)-2-((tert-butoxycarbonyl)amino)-8-hydroxydecanoate and methyl-(2S,8S)-2-((tert-butoxycarbonyl)amino)-8-hydroxydecanoate of an unusual amino acid residue and the key fragment of microsporin B are prepared. The key steps include cross metathesis and enzymatic kinetic resolution. In addition, a linear tetrapeptide with desired components towards total synthesis is also reported.     

Inositol synthesis: concise preparation of l-chiro-inositol and muco-inositol from a common intermediate

Fully stereoselective large-scale syntheses have been attained for l-chiro-inositol (2) and muco-inositol (3) by means of controlled peripheral oxygenation of cyclohexadiene diol 1.     

Ionic liquid-phase asymmetric catalytic hydrogenation: hydrogen concentration effects on enantioselectivity

Molecular hydrogen is almost four times more soluble in the ionic liquid 1-n-butyl-3-methylimidazolium tetrafluoroborate (BMI·BF₄) than in its hexafluorophosphate (BMI·PF₆) analogue at the same pressure. The Henry coefficient solubility constant for the solution BMI·BF₄/H₂ is K=3.0×10⁻³ mol L⁻¹ atm⁻¹ and 8.8×10⁻⁴ mol L⁻¹ atm⁻¹ for BMI·PF₆/H₂, at room temperature. The asymmetric hydrogenation of (Z)-α-acetamido cinnamic acid and kinetic resolution of (±)-methyl-3-hydroxy-2-methylenebutanoate by (−)-1,2-bis((2R,5R)-2,5-diethylphospholano)benzene(cyclooctadiene)rhodium(I) trifluoromethanesulfonate and dichloro[(S)-(−)-2,2′-bis(di-p-tolylphosphino)-1,1′-binaphthyl]ruthenium(II) complexes immobilised in BMI·PF₆ and BMI·BF₄ were investigated. Remarkable effects in the conversion and enantioselectivity of these reactions were observed as a function of molecular hydrogen concentration in the ionic phase rather than pressure in the gas phase.     

Synthesis and diastereoselective catalytic hydrogenation of optically active cyclobutyl α,β-dehydro-α-dipeptides

Optically active cyclobutyl (Z)-α,β-dehydro-α-dipeptides have been efficiently synthesized through the coupling of conveniently protected glycine or (S)-phenylalanine residues with a (Z)-dehydro-α-amino acid derivative prepared, in turn, from (−)-verbenone as a chiral precursor. The alternative use of (R,R)- and (S,S)-Et–duphos–Rh as the hydrogenation catalyst led to the stereoselective production of both diastereomeric saturated dipeptides in each case. Thus, the chirality of the catalyst employed has been shown to be the factor governing the configuration of the newly created stereogenic centre. Regarding structural features, both NMR and CD data establish a marked conformational bias for both the unsaturated and the saturated peptides synthesized herein.     

Stereoselective synthesis of either (E)- or (Z)-silyl enol ether from the same acyclic α,β-unsaturated ketone using cationic rhodium complex-catalyzed 1,4-hydrosilylation

The stereoselective synthesis of either (E)- or (Z)-silyl enol ether from the same acyclic α,β-unsaturated ketone is reported. Highly (Z)-selective conditions were the use of [Rh(cod)₂]BF₄/DPPE at room temperature with no solvent, whereas (E)-selective conditions were the use of [Rh(cod)₂]BF₄/P(1-Nap)₃ (1-Nap = 1-naphthyl) under refluxing dichloromethane.     

Synthesis and isolation of a monoamine having a thermodynamically stabilized pseudo-chirotopic nitrogen

We have synthesized a tricyclic monoamine, (1S,4R)-(E)-7,3′-heptenylene-2,3:5,6-dibenzo-7-azabicyclo[2.2.1]heptane (1), by applying a ring-closing metathesis reaction in the key step of the synthetic route and by using preparative chiral HPLC for the separation. The X-ray crystallographic analysis of its salt with (1R)-camphor-10-sulfonic acid showed that the geometry and absolute configuration are (E) and (1S,4R), respectively. The theoretical calculations revealed that the inversion of the nitrogen atom at the 7-position of (1S,4R)-(E)-1 thus isolated takes place through a very slow process and that the configuration of the N(7) is highly biased to (R), indicating that (1S,4R)-(E)-1 is a thermodynamically controlled N-pseudo-chirotopic compound ((1S,4R,7R): (1S,4R,7S) = 99.68:0.32 at 120 °C).     

Highly enantioselective Michael addition of isobutyraldehyde to nitroalkenes

The asymmetric catalytic Michael reaction between isobutyraldehyde and nitroalkanes with chiral primary amine thiourea organocatalysts was described. In the presence of 10 mol % of 1-((1R,2R)-2-amino-1,2-diphenylethyl)-3-benzylthiourea, the desired products were achieved in excellent enantioselectivity (up to>99% ee) with up to 98% yield.     

Efficient routes to optically active azido-, amino-, di-azido- and di-amino-cyclitols with chiro- and allo-configuration from myo-inositol

Efficient routes to hitherto unknown 1d-2,5-di-azido-di-deoxy-allo-inositol, 1d-2,5-di-amino-di-deoxy-allo-inositol, 1l-1-azido-1-deoxy-chiro-inositol and 1l-1-amino-1-deoxy-chiro-inositol were developed by using cheaply available myo-inositol as the starting material. Preliminary investigations on the enzyme inhibitory properties were done. The methodology reported is amenable to gram scale synthesis and thus can find application in natural product synthesis.     

NMR and X-Ray Diffraction Study of Some Inositol Derivatives 1

Abstract

We have determined the preferred conformers in solution by a detailed NMR analysis using COSY and HETCOR experiments of three inositol isomers: myo (1), scyllo (2) and epi (3) plus sixteen derivatives of myo-inositol: 1,2,3,4,5,6-hexa-O-acetyl-myo-inositol (4), 1,2,-O-isopropylidene-myo-inositol (5), 1,2:4,5-di-O-isopropylidene-myo-inositol (6), 3,4,5,6-tetra-O-acetyl-1,2-O-isopropylidene-myo-inositol (7), 3,4,5,6-tetra-O-acetyl-myo-inositol (8), 1,2-O-isopropylidene-3,6-di-O-tosyl-myo-inositol (9), 1,2-O-isopropylidene-3,4,6-tri-O-tosyl-myo-inositol (10), 1,2:4,5-di-O-isopropylidene-3-O-tosyl-myo-inositol (11), 3,6-di-O-benzyl, 1,2:4,5-di-O-isopropylidene-myo-inositol (12), 3,6-di-O-benzyl-1,2-O-isopropylidene-myo-inositol (13), 3,6-di-O-benzyl-myo-inositol (14), 1,2-O-cyclohexylidene-myo-inositol (15), 1,2:4,5-di-O-cyclohexylidene-myo-inositol (16), 1,2:5,6-di-O-cyclohexylidene-myo-inositol (17), 1,3,5-O-(orthoformate)-myo-inositol (18) and 2-benzyl-1,3,5-O-(orthoformate)-myo-inositol (19). The X-ray diffraction structure of compounds 2, 6-8, 18 and 19 are reported.

     

Iodomethane oxidative addition and CO migratory insertion in monocarbonylphosphine complexes of the type [Rh((C6H5)COCHCO((CH2)nCH3))(CO)(PPh3)]: Steric and electronic effects

The chemical kinetics, studied by UV/Vis, IR and NMR, of the oxidative addition of iodomethane to [Rh((C₆H₅)COCHCOR)(CO)(PPh₃)], with R = (CH₂)_nCH₃, n = 1-3, consists of three consecutive reaction steps that involves isomers of two distinctly different classes of Rh^III-alkyl and two distinctly different classes of Rh^III-acyl species. Kinetic studies on the first oxidative addition step of [Rh((C₆H₅)COCHCOR)(CO)(PPh₃)] + CH₃I to form [Rh((C₆H₅)COCHCOR)(CH₃)(CO)(PPh₃)(I)] revealed a second order oxidative addition rate constant approximately 500-600 times faster than that observed for the Monsanto catalyst [Rh(CO)₂I₂]⁻. The reaction rate of the first oxidative addition step in chloroform was not influenced by the increasing alkyl chain length of the R group on the β-diketonato ligand: k₁ = 0.0333 ([Rh((C₆H₅)COCHCO(CH₂CH₃))(CO)(PPh₃)]), 0.0437 ([Rh((C₆H₅)COCHCO(CH₂CH₂CH₃))(CO)(PPh₃)]) and 0.0354 dm³ mol⁻¹ s⁻¹ ([Rh((C₆H₅)COCHCO(CH₂CH₂CH₂CH₃))(CO)(PPh₃)]). The pK_a^′ and keto-enol equilibrium constant, K_c, of the β-diketones (C₆H₅)COCH₂COR, along with apparent group electronegativities, χ_R of the R group of the β-diketones (C₆H₅)COCH₂COR, give a measurement of the electron donating character of the coordinating β-diketonato ligand: (R, pK_a^′, K_c, χ_R) = (CH₃, 8.70, 12.1, 2.34), (CH₂CH₃, 9.33, 8.2, 2.31), (CH₂CH₂CH₃, 9.23, 11.5, 2.41) and (CH₂CH₂CH₂CH₃, 9.33, 11.6, 2.22).     

Synthesis of enantiomerically pure (Z)-(2′R)-1-O-(2′-methoxyhexadec-4′-enyl)-sn-glycerol present in the liver oil of cartilaginous fish

Synthesis of enantiopure (Z)-(2′R)-1-O-(2′-methoxyhexadec-4′-enyl)-sn-glycerol 1, the principal methoxylated glyceryl ether found in Nature, is described by a highly convergent five-step process taking place in 27% overall yield. The synthesis is based on an ether bond formation between the chiral synthon (R)-2,3-O-isopropylidene-sn-glycerol and (Z)-(R)-1-chlorohexadec-4-en-2-ol employing ground potassium hydroxide and tetra-n-butylammonium bromide as a catalyst under solvent free conditions.     

Highly enantioselective Michael addition of acetone to nitroolefins catalyzed by chiral bifunctional primary amine-thiourea catalysts with acetic acid

Highly enantioselective Michael reaction of acetone with a variety of nitroolefins catalyzed by N-[(1R,2R)-2-aminocyclohexyl]-N′-(2,3,4,6-tetra-O-acetyl-β-d-glucopyranosyl)-thiourea (1b) together with acetic acid is described. The Michael addition products were obtained in high yields (76-94%) and up to 96% ee.     

Diastereoselective amidoallylation of glyoxylic acid with chiral tert-butanesulfinamide and allylboronic acid pinacol esters: efficient synthesis of optically active γ,δ-unsaturated α-amino acids

A convenient synthesis of δ,γ-unsaturated amino acids has been developed. After a mixture of (R)-tert-butanesulfinamide and glyoxylic acid with molecular sieves in CH₂Cl₂ was stirred for 42 h at room temperature, allylboronic acid pinacol ester was added to the mixture to give (R)-2-((R)-tert-butanesulfinamido)pent-4-enoic acid with high diastereoselectivity. The corresponding reaction of (Z)-crotylboronic acid pinacol ester produced no product; however, that of (E)-crotylboronic acid pinacol ester produced (2R,3S)-2-((R)-tert-butylsulfinamido)-3-methylpent-4-enoic acid with excellent diastereoselectivity.