Novel aromatic polyimides derived from benzofuro[2,3-b]benzofuran-2,3,8,9-tetracarboxylic dianhydride (BBTDA)

Benzofuro[2,3-b]benzofuran-2,3,8,9-tetracarboxylic dianhydride (BBTDA) is introduced as a monomer for the synthesis of a series of novel polyimides with enhanced high thermal stability. Polyimides derived from BBTDA and aromatic diamines showed high glass transition (T_g>296 °C) and degradation (T₅>455 °C) temperatures, and were soluble in organic solvents (i.e. N-methyl pyrrolidone (NMP), N,N^′-dimethylformamide (DMF), N,N^′-dimethylacetamide (DMAc)). The polymerization yielded high-molecular-weight polyimides with inherent viscosities ranging from 1.75 to 2.14 dl/g. The polymers were characterized by IR and elemental analysis.     

Synthesis and characterization of N-phenylated aromatic polyureas from dianilino compounds and aromatic diisocyanates

N-phenylated aromatic polyureas were synthesized by the polyaddition of dianilino compounds to aromatic diisocyanates in sym-tetrachloroethane at around 100°C. Factors that influence the reaction, such as monomer concentration, reaction solvent, catalyst, temperature, and time, were studied to optimize the conditions for the preparation of high molecular weight polymers. Compared with the analogous unsubstituted aromatic polyureas, the N-phenylated polyureas were almost amorphous and soluble in a variety of solvents and had low glass transition temperatures. Some of the polymers could be cast into transparent flexible films from chloroform solutions.     

Synthesis and characterization of some novel organometallic aromatic polyamides

Some novel ferrocene containing aromatic polyamides were prepared by low‐temperature solution phase polycondensation of 1,1′‐ferrocenedicarboxylic acid chloride with some newly synthesized aromatic diamines in tetrahydrofuran, in the presence of triethylamine. The amorphous polymers were derived in good yields, and did not melt at >350 °C. The monomers and the resulting polymers were characterized by their physical properties, elemental analysis, ¹H‐NMR, FTIR spectroscopy, differential scanning calorimetry and thermogravimetric analyses. The polymeric products were insoluble in common solvents tested. However, all were miscible in concentrated H₂SO₄, forming reddish brown solutions at ambient conditions. The glass transition temperatures (T_g) of these polymers were quite high, which is characteristic of aramids. They are stable up to 500 °C, with 10% mass loss observed in the range 400–650 °C. The activation energies of pyrolysis for each of the products were calculated by Horowitz and Metzger's method. Solution viscosities of the polymers were reduced in concentrated sulfuric acid, which is due to their non‐Newtonian behavior. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis,thermal and radiation sensitivities of halogen-containing decamethylene-spacered aromatic polyesters

A series of halogen-containing aromatic polyesters with decamethylene-spacer groups was synthesized by the solution polymerization from 4,4′-dicarboxyl-1,10-diphenoxy-decane and bisphenol A. Incorporation of fluorine atoms in the bisphenol A units in the polymer backbone enhanced the solubility of the polyesters in various organic solvents, as did the substitution of chlorine and bromine on the aromatic rings of the bisphenol A, ortho to the ester linkages. The effect of the halogen substituents on the thermal and radiation sensitivities of the polyesters has been investigated. The inherent viscosities of THF solutions at 30°C ranged from 0.25 to 0.63 dL/g. The number average (6,000∼31,000) and weight average molecular weights (12,000∼48,000) were measured by gel permeation chromatogrpahy, resulting in polydispersity indices of M₂/M_n=1.6∼2.0. The chemical structures of the polyesters were characterized by means of IR spectroscopy, ¹H NMR and ¹³C NMR spectroscopies and elemental analyses. All the results were in good agreement with the expected formula. Comparison of ¹³C NMR spectra of the polymers aided in the assignments of the structures. Only the unsubstituted polyester derived from bisphenol A was found to be semicrystalline by X-ray diffraction and DSC measurements, with a crystalline melting temperature of 160°C. The glass transition temperatures of the polyesters was found to be dependent on the size of the halogen substituent on the repeating units, and ranged from 77 to 140°C. The thermal stabilities of the polyesters showed a dependence on the nature of the halogen substituent, as did the high energy radiation sensitivites of the polymers, as assessed by the yields of radicals at 77 K. © 1998 John Wiley & Sons, Ltd.     

New high temperature polymers. I. Wholly aromatic ordered copolyamides

Wholly aromatic ordered copolyamides of unusually high thermal stability were prepared by the condensation of aromatic diacid chlorides with symmetrical diamines containing preformed aromatic amide units in an ordered arrangement. The preservation of order in the condensation step was assured by using interfacial or solution polymerization techniques at temperatures below 50°C. Each polymer contains units derived from aminobenzoic acids, arylene diamines, and arylene diacids. By use of para- and meta- phenylene units, eight different polymers are possible; all were prepared. Differential thermal analyses and thermogravimetric analyses showed these polymers to have melting points or decomposition temperatures in a range from 410°C. for the all-meta polymer to 555°C. for the all-para one. Substitution of the internal N-hydrogens of the diamines with methyl groups or phenyl groups leads to additional ordered copolymers. Several were prepared, but their melting points were much lower than those of the parent polymers limiting their usefulness in high temperature applications. Tough pliable films were prepared from all eight unsubstituted polymers, and crystalline fibers with tenacities of ca. 6 g./den. were prepared from three of the polymers. The properties of the fibers were retained to a high degree even when determined at temperatures up to 400°C. Fibers aged at 300°C. for extended periods of time showed remarkable retention of fiber properties.     

Synthesis and characterization of novel polyesters derived from 4-aryl-2,6-bis(4-chlorocarbonyl phenyl) pyridines and various aromatic diols

A new class of aromatic polyesters containing pyridine heterocyclic rings (PE_1-15) was prepared via reactions of 4-aryl-2,6-bis(4-chlorocarbonyl phenyl) pyridines (DAC_1-3) and commercial diols by high temperature solution polymerization method in o-dichlorobenzene and catalytic amount of triethylamine hydrochloride. The optimum condition of polymerization was obtained via study of a model compound prepared from reaction of 4-phenyl-2,6-bis(4-chlorocarbonylphenyl) pyridine (DAC₁) and phenol. All polymers were characterized by FTIR and ¹H-NMR spectroscopies, and their physical properties including solution viscosity, solubility properties, thermal stability and thermal behavior were studied. The prepared polyesters showed excellent thermal stability and good solubility in polar aprotic solvents.     

Aromatic polyamides. V. A general synthesis of polyamides from aromatic diacids and aromatic diamines in sulfur trioxide

The reaction of terephthalic acid (TA) and para-phenylenediamine sulfate (PPD-S) in sulfur trioxide to form anisotropic, sulfonated poly(p-phenyleneterephthalamide) (SPT) dopes was reported in Part IV of this series. We have found now that the TA/PPD-S polymerization is only one example of a more general polyamide condensation reaction of aromatic diamines and aromatic diacids. Sulfonation of the aromatic diamine ring during TA/PPD-S polymerization in SO₃ was a major side reaction. Sulfonation was reduced or eliminated by aromatic diamine ring substitution with unreactive substituents, particularly chlorine and fluorine. Polymerization of 2,3,5,6-tetrafluoro-phenylenediamine with TA in SO₃ at 80°C (18% concentration) produced unsulfonated poly(tetrafluoro-para-phenyleneterephthalamide) (F-PPT) with an inherent viscosity of 2.2. The halogenated, all-para aromatic polymers formed highly anisotropic (liquid crystalline) dopes. Monomers that formed polymers in which the chain bond angle deviated from 180° (e.g., meta-oriented monomers) yielded only isotropic polymer solutions. The mechanism and rate of diamine–diacid reactivity in SO₃ was related to diamine basicity. Whereas the less basic aromatic diamines (as sulfates) polymerized with aromatic diacids in SO₃, the more basic aliphatic diamines (as sulfates) would not. Aliphatic, cycloaliphatic, and aryl-aliphatic diacids were degraded by or reacted with the solvent (SO₃). Thermogravimetric analyses of F-PPT and monosulfonated poly(chloro-para-phenyleneterephthalamide) at 20°C/min showed weight loss only above 380 and 370°C, respectively.     

Synthesis of aromatic polyamide-imides from N,N′-bis(trimethylsilyl)-substituted aromatic diamines and 4-chloroformylphthalic anhydride

The polymerization of N,N′-bis(trimethylsilyl)-substituted aromatic diamines with 4-chloroformylphthalic anhydride in various solvents at a temperature range between 10 and 70°C afforded polyamide-amic acid trimethylsilyl esters having inherent viscosities of 0.8–1.4 dL/g. Transparent and flexible films of the silylated precursor polymers were obtained by casting directly from the polymer solutions. Desilylation of the silylated polymers with methanol resulted in the formation of the corresponding polyamide-amic acids. Subsequent thermal imidization of the silylated precursor polymers with the elimination of trimethylsilanol afforded yellow, transparent, and tough films of the aromatic polyamide-imides. The thermal conversion of the silylated precursor polymer to polyamide-imide proceeded almost as rapidly as that of the corresponding polyamide-amic acid prepared by a conventional method from the parent aromatic diamine and 4-chloroformylphthalic anhydride.     

Soluble polyimides containing alicyclic structures

A series of novel aromatic diamines containing kinked cycloalkane structures between two phenyl rings were synthesized by HCl-catalyzed condensation reaction of excess aniline and corresponding cycloalkanone derivatives. The structures of the diamines were indentified by ¹H NMR, ¹³C NMR, FT-IR spectroscopy and elemental analysis. The polyimides were synthesized from the obtained diamines with various aromatic dianhydrides by one-step polymerization in m-cresol. The polymerization was conducted for 6∼8 h with refluxing, which was enough to obtain the polymers with high molecular weight. The inherent viscosities of the resulting polyimides were in the range of 0.37∼1.66 dl/g. All polymers were readily soluble in common organic solvents such as chloroform, tetrachloroethane, dimethylacetamide, etc. and the glass transition temperatures were observed at 290 to 372°C. UV-visible spectra were obtained to measure the transparency of polymer films. Most of the polymers showed high transmission above 90 % in the wavelength of 450 ∼ 600 nm.     

One-pot polyamidation reaction of optically active aromatic diacid containing methionine and phthalimide moieties with aromatic diamines under microwave irradiation and traditional heating

An optically active diacid containing phthalimide and l-methionine moiety was prepared in three steps, and was polymerized with several aromatic diamines to obtain a new series of optically active polyamides (PAs) through direct polyamidation using triphenyl phosphite/pyridine/N-methyl-2-pyrrolidone/CaCl₂ system as condensing agent. The polymerization reactions were carried out under both conventional heating and microwave-assisted irradiation. The data obtained by these methods indicate that, high yields and similar inherent viscosities are resulted. It is worth to mention that in the case of microwave conditions, a drastic decrease in reaction time (3 min vs. 5 h) and cleaner reaction have been achieved. These polymers are readily soluble in polar organic solvents such as N,N-dimethyacetamide, N,N-dimethyformamide, dimethyl sulfoxide. The obtained polymers were characterized by FT-IR, specific rotation measurements, elemental analysis and ¹H NMR techniques. The thermal stability of the resulting PAs were evaluated with thermogravimetric analysis and differential scanning calorimetry techniques under a nitrogen atmosphere which indicate they are moderately stable.     

Preparation and properties of aromatic poly(amide–benzothiadiazine dioxides)

New thermostable poly(amide–benzothiadiazine dioxides) of high molecular weights have been prepared by the two-step cyclopolycondensation of diaminobenzenesulfonamides and aromatic bisacyl chlorides. In the first step, the low-temperature solution polymerization technique afforded open-chain polyamides (I) having high molecular weights. In the second step, the polymeric precursors (I) underwent chemical cyclodehydration in the presence of organic basic catalysts at 160°C to give poly(amide–benzothiadiazine dioxides) (II), whereas thermal cyclodehydration gave unsatisfactory results. Not only the open-chain polymers (I) but also the cyclized polymers (II) were soluble in polar solvents, such as N,N-dimethylacetamide and N-methyl-2-pyrrolidone; tough films were cast from these solutions. Thermogravimetric analyses indicated that the cyclized polymers (II) began to decompose at 450–470°C under nitrogen or in air. It is interesting to note that both polymers I and II exhibited self-extinguishing properties against free flame. The cyclodehydration of model compounds was also investigated.     

Photoconductivity and hole transport in polymers of aromatic amine-containing methacrylates

Substantial hole transport can be achieved in organic polymers simply by incorporating aromatic amine groups into the monomer. Hole mobilities similar to or greater than those in poly(N-vinyl-carbazole) (PVK) were measured in a series of high molecular weight arylamine-substituted polymethacrylates. The hole transport in these polymers is electric-field-dependent as in PVK, varying between E and E² within a range of 4 × 10⁴ ? ～9 × 10⁵ V/cm. The polymers also exhibit carrier generation in ultraviolet (UV) light in the range of absorption. Synthesis of the monomers, their polymerization, and the general properties of these polymers are discussed.     

Preparation and properties of aromatic poly(amide-imide)s derived from N-[3,5-bis(3,4-dicarboxybenzamido)phenyl]phthalimide dianhydride

An imide ring-containing diamide-dianhydride, N-[3,5-bis(3,4-dicarboxybenzamido)phenyl]phthalimide dianhydride (1) was prepared by the reaction of trimellitic anhydride chloride with N-(3,5-diaminophenyl)phthalimide in a medium consisting of methylene chloride and pyridine. A series of new alternating aromatic poly(amide-imide)s having inherent viscosities of 0.26-0.37 dl/g was synthesized using a two-step poly(amic-acid) precursor method. A reference monomer, 1,3-bis(3,4-dicarboxybenzamido)benzene dianhydride (2) without the phthalimido pendant group attached to the polymer main chain was prepared in order to study the structure-property relationship. In this case, the structure effects on some properties of the resulting poly(amide-imide)s including crystallinity, solubility, thermal stability, and film flexibility could be easily clarified. A diamide-triimide (3) as a model compound was also synthesized by the reaction of new dianhydride 1 with aniline to compare the characterization data as well as to optimize the polymerization conditions. The resulting polymers were fully characterized by FT-IR, UV-visible and ¹H NMR spectroscopy. Most of the polymers showed an amorphous nature and were readily soluble in a variety of organic solvents such as N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), N-methyl-2-pyrrolidone (NMP), and pyridine. The glass-transition temperatures of these polymers were recorded between 301 and 371 °C. All polymers showed no significant weight loss below 500 °C in nitrogen, and the decomposition temperatures at 10 wt.% loss range from 506 to 543 °C. The films of the resulting poly(amide-imide)s could be cast from their NMP solutions, and the transparency and flexibility of them were investigated.     

A Reductive homo-coupling polymerization of aromatic diisocyanates promoted by samarium iodide

The selective reductive homo-coupling polymerization of aromatic diisocyanates via one-electron transfer promoted by samarium iodide in the presence of hexamethylphosphoramide (HMPA) produced the corresponding poly(oxamide)s ( 1 ) nearly quantitatively. The ob-tained polymers were insoluble in common organic solvents. The alkylation of 1 with methyl iodide or allyl bromide in the presence of potassium tert-butoxide provided the highly soluble alkylated polymer in good yields. In either case, the alkylation was almost complete, and both N-and O-alkylation proceeded. The ratio of N-and O-methylation was found to be 64 : 36 by ¹H-NMR spectrum, and that of N- and O-allylation was 3 : 1 from ¹³C-NMR analysis. The present polymerization system could be applied to a variety of diisocyanates, including diphenylmethanediisocyanate (MDI), tolylene 2,6-diisocyanate (TDI), 2,6-naphthyl diisocyanate (NDI) and o-tolidine diisocyanate (TODI). The molecular weights of the polymers were estimated by GPC and found to be 2000–9000. The TGA measurement of the corresponding polymers showed T_d10 at 248–320°C. © 1995 John Wiley & Sons, Inc.     

Fire- and heat-resistant matrix resins based on ethynyl-substituted aromatic cyclotriphosphazenes

A novel class of fire- and heat-resistant matrix resins has been synthesized by thermal polymerization of ethynyl-substituted aromatic cyclotriphosphazenes. Thermal polymerization of new tris[4-(4′-ethynylbenzanilido)phenoxy]tris(phenoxy) cyclotriphosphazene ( III ) and tris[4-(4′-ethynylphthalimido)phenoxy]tris(phenoxy)cyclotriphosphazene ( VII ) at 250°C for 1–1.5 h gave tough polymers. The thermal stabilities of the polymers were evaluated in nitrogen and in air by thermogravimetric analysis (TGA). The synthesised polymers were stable to 400–410°C and showed char yield of 78–65% at 800°C in nitrogen and of 78–69% at 700°C in air. The ethynyl-substituted polymer precursor ( III ) was synthesised by the reaction of tris(4-aminophenoxy)tris(phenoxy)cyclotriphosphazene ( I ) with 4-ethynylbenzoyl chloride. The polymer precursor ( VII ) was synthesised by a solution condensation of I with 4-ethynylphthalic anhydride followed by in situ thermal cyclodehydration at 150°C. The structure of polymer precursors was characterized using proton nuclear magnetic resonance (¹H-NMR), infrared (IR) spectroscopy, and elemental analysis. The curing of polymer precursors was monitored by differential scanning calorimetery (DSC) and IR spectroscopy. The synthesised matrix resins are potential candidates for the development of heat- and fire-resistant fiber-reinforced composites. © 1993 John Wiley & Sons, Inc.     

Preparation and properties of aromatic polymides from 2,2′-bibenzoic acid and aromatic diamines

Aromatic polyamides having inherent viscosities up to 1.8 dL/g were synthesized either by the direct polycondensation of 2,2′-bibenzoic acid with various aromatic diamines or by the low temperature solution polycondensation of 2,2′-bibenzoyl chloride with aromatic diamines. All the aromatic polyamides were amorphous and soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone, dimethyl sulfoxide, m-cresol, and pyridine. Transparent and flexible films of these polymers could be cast from the DMAc solutions. These aromatic polymides had glass transition temperatures in the range of 226-306deg;C and began to lose weight around 350°C in air.     

Synthesis and characterization of hyperbranched aromatic polyester-imides with good thermal properties based on 1,3,5-tris(3′,4′-carboxyphenyl)benzene trianhydride

A new trifunctional monomer, 1,3,5-tris(3′,4′-carboxyphenyl)benzene trianhydride (TAn), was synthesized and characterized by elemental analysis, FTIR, ¹H and ¹³C NMR spectroscopy. Subsequently, one-step high-temperature polymerization of TAn and a series of commercially available diamine monomers such as p-phenylenediamine (PDA, 1), 4,4′-oxydianiline (ODA, 2), and 1,5-diaminonaphthalene (DAN, 3) successfully yielded wholly aromatic anhydride-terminated hyperbranched poly(ester-imide)s HBPEI 1, 2, and 3, respectively. Gelation was effectively avoided by controlling 1:1 M ratio of A₂ and B₃ monomers and maintaining total solid content 10 mmol, thereby, producing a novel family of aromatic HBPEIs with inherent viscosities (η_inh) of 0.17-0.28 dL/g. As-prepared HBPEIs were fully characterized by FTIR spectroscopy and were soluble in DMAc, DMSO and NMP. Degree of branching (DB) by ¹H NMR analysis of the HBPEIs was estimated to be 0.52-0.56. Differential scanning calorimetry (DSC) showed glass transition temperatures (T_g) between 198 and 208 °C and the synthesized polymers were thermally stable. Furthermore, crystallinity of the polymers was evaluated by means of X-ray diffraction patterns.     

Pyrimidine based carboxylic acid terminated aromatic and semiaromatic hyperbranched polyamide-esters: synthesis and characterization

Carboxylic acid terminated aromatic and semiaromatic hyperbranched polyamide-esters (HBPAEs) containing pyrimidine moieties were prepared by polycondensation of 4-hydroxy-2,6-diaminopyrimidine (CBB′) to a double molar ratio of various diacid chlorides (A₂) without any catalyst. The products were soluble in organic solvents, such as N,N-dimethylformamide, N-methyl-2-pyrrolidone and displayed glass transition temperature (T_g) between 180 and 244 °C. The polymerization products have been investigated with FTIR, ¹H and ¹³C NMR analyses and the degree of branching was higher than 60%. Amorphous polymers had inherent viscosity (η_inh) ranging between 0.21-0.28 dL/g and had excellent thermal stability with 10% weight loss at 346-508 °C.     

Cyclopolycondensations. VI. Fully aromatic polybenzoxazinones from aromatic poly(amic acids)

New high temperature aromatic polybenzoxazinones of high molecular weight have been prepared by the cyclopolycondensation of 4,4′-diaminobiphenyl-3,3′-dicarboxylic acid (I) with aromatic dicarboxylic acid halides (II). The low temperature solution polymerization techniques afforded poly(amic acid) (III) of high molecular weight in the first step. An open-chain precursor subsequently underwent thermal cyclodehydration along the polymer chain at 200–350°C. in the second step, to give in quantitative yield a fully aromatic polybenzoxazinone (IV) of outstanding heat stability both in nitrogen and in air. The poly(amic acid) is soluble in N-methyl-2-pyrrolidone, and tough, transparent films can be cast from solution. Insoluble aromatic polybenzoxazinone films which possess excellent oxidative and thermal stability were obtained by the heat treatment of the polyamic acid. A detailed account of polymerization conditions in the low temperature solution polymerization of polybenzoxazinones is given, and the reaction mechanisms of cyclopolycondensation of poly(amic acids) and the formation of polybenzoxazinones are discussed.     

Synthesis of polyaryloxysilanes by melt-polymerizing dianilino- and diphenoxysilanes with aromatic diols

A series of polyaryloxysilanes was prepared from aromatic diols and dianilino- and diphenoxysilanes. High molecular weight polymers were obtained at temperatures of 200°C. or higher by using melt-polymerization procedures. The polymers, which combine the structures of silicones and polyaromatics, possessed high thermal stabilities and were obtained as materials which (1) failed to melt or soften at 350°C., (2) were gumlike at elevated temperatures, or (3) were soluble, film- and fiber-forming polymers capable of being processed as conventional thermoplastics and having potentially useful mechanical properties. The preparation of monomers, general polymerization procedures, and certain structure-property relationships for the thermoplastic polyaryloxysilanes are considered.