Low-temperature thermodynamic properties of <Emphasis Type="Italic">L</Emphasis>-cysteine

Heat capacity C _p(T) of the orthorhombic polymorph of L-cysteine was measured in the temperature range 6–300 K by adiabatic calorimetry; thermodynamic functions were calculated based on these measurements. At 298.15 K the values of heat capacity, C _p; entropy, S _m⁰(T)-S _m⁰(0); difference in the enthalpy, H _m⁰(T)-H _m⁰(0), are equal, respectively, to 144.6±0.3 J K⁻¹ mol⁻¹, 169.0±0.4 J K⁻¹ mol⁻¹ and 24960±50 J mol⁻¹. An anomaly of heat capacity near 70 K was registered as a small, 3–5% height, diffuse ‘jump’ accompanied by the substantial increase in the thermal relaxation time. The shape of the anomaly is sensitive to thermal pre-history of the sample.     

Effects of ionization on the phase behavior of poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide-co-acrylic acid) and poly(<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diethylacrylamide-co-acrylic acid) in water

Phase transitions of poly(N-isopropylacrylamide-co-acrylic acid) (PiPA-AA) and poly(N,N- diethylacrylamide-co-acrylic acid) (PdEA-AA) in water have been investigated by means of turbidimetry, Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC). The phase transition temperatures (T_p) of these copolymers increase with the degree of ionization () of the acrylic acid (AA) units, which in turn is dependent on the pH of the solutions. Apparent values of pK_a for the AA units, determined from the pH dependencies of T_p, are 4.7 and 5.4 for PiPA-AA and PdEA-AA, respectively. Differences between T_p for PiPA-AA and T_p for PiPA homopolymer (T_p) are +1.5 and –0.2 °C/mol% of AA at =1 and 0, respectively. The values of T_p for PdEA-AA are +2.6 (ionic) and –0.5 (nonionic)°C/mol%, indicating that the incorporated AA units have a larger effect on PdEA than on PiPA. DSC measurements performed with each of these copolymers at different pH values show a linear relationship between T_p and the enthalpy of transition (H). IR measurements of PiPA-AA show that the profiles of IR bands from both iPA and AA units exhibit critical changes at T_p of the copolymer. Heating the solution above T_p leads to shifts of the amide II, C–H stretch, and C–H bend bands from the iPA units toward lower wavenumbers, as well as a shift of the amide I band from the iPA units toward higher wavenumbers. A decrease in the intensity of the symmetric C=O stretch IR band from carboxylate anions (1560 cm^–1), and an increase in the intensity of the C=O stretch band from COOH groups (1705 cm^–1) suggest that a partial protonation of the carboxylate groups (COO^–+H⁺COOH) takes place upon the phase transition.     

Heat capacities and thermodynamic properties of (<Emphasis Type="Italic">S</Emphasis>)-<Emphasis Type="Italic">tert</Emphasis>-butyl 1-phenylethylcarbamate

An N-tert-butyloxycarbonylated organic synthesis intermediate, (S)-tert-butyl 1-phenylethylcarbamate, was prepared and investigated by means of differential scanning calorimetry (DSC) and thermogravimetry (TG). The molar heat capacities of (S)-tert-butyl 1-phenylethylcarbamate were precisely determined by means of adiabatic calorimetry over the temperature range of 80-380 K. There was a solid–liquid phase transition exhibited during the heating process with the melting point of 359.53 K. The molar enthalpy and entropy of this transition were determined to be 29.73 kJ mol⁻¹ and 82.68 J K⁻¹ mol⁻¹ based on the experimental C _p–T curve, respectively. The thermodynamic functions, [H_T⁰ - H_298.15⁰ H_{T}^{0} - H_{298.15}^{0} ] and [S_T⁰ - S_298.15⁰ S_{T}^{0} - S_{298.15}^{0} ], were calculated from the heat capacity data in the temperature range of 80–380 K with an interval of 5 K. TG experiment showed that the pyrolysis of the compound was started at the temperature of 385 K and terminated at 510 K within one step.     

ESR studies on solvation by using <Emphasis Type="Italic">s</Emphasis>-butyl trifluoroacetyl nitroxide probe

Stable s-butyl trifluoroacetyl nitroxide (3) has been generated in electron-transfer reaction of O-benzoyl-N-s-butylhydroxylamine (1) and trifluoroacetyl peroxide (2) in F113 (CFCl₂CF₂Cl) solution at room temperature. ESR measurement of a _N and a _H values for 3 in 21 solvents has been carried out at 24~ 25°C. The a _N values for 3 in 12 aprotic solvents show a linear correlation with the cybotactic solvent parameters E _T and Z, i.e. a _N = 1.35×10-² E _T+6.84, a _N = 0.78×10-² Z+6.88. The physical significance for the slopes, slope × E _T or slope × Z, the extrapolated intercepts on the a _N axis are linked to the sensitivity of the nitroxide toward the solvation, the magnitude of the overall solvaton effect on the a _N values, and the intrinsic a _N value of 3 in the ideal gaseous state, respectively. The plots of a _N versus noncybotactic solvent constants, such as dipolar moment () and dielectric constant (), all show random cases.     

Thermochemical study on ternary complex of dysprosium <Emphasis Type="Italic">m</Emphasis>-nitrobenzoic acid with <Emphasis Type="Italic">o</Emphasis>-phenanthroline

A ternary binuclear complex of dysprosium chloride hexahydrate with m-nitrobenzoic acid and 1,10-phenanthroline, [Dy(m-NBA)₃phen]₂·4H₂O (m-NBA: m-nitrobenzoate; phen: 1,10-phenanthroline) was synthesized. The dissolution enthalpies of [2phen·H₂O(s)], [6m-HNBA(s)], [2DyCl₃·6H₂O(s)], and [Dy(m-NBA)₃phen]₂·4H₂O(s) in the calorimetric solvent (V_DMSO:V_MeOH = 3:2) were determined by the solution–reaction isoperibol calorimeter at 298.15 K to be \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [2phen·H₂O(s), 298.15 K] = 21.7367 ± 0.3150 kJ·mol⁻¹, \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [6m-HNBA(s), 298.15 K] = 15.3635 ± 0.2235 kJ·mol⁻¹, \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [2DyCl₃·6H₂O(s), 298.15 K] = −203.5331 ± 0.2200 kJ·mol⁻¹, and \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [[Dy(m-NBA)₃phen]₂·4H₂O(s), 298.15 K] = 53.5965 ± 0.2367 kJ·mol⁻¹, respectively. The enthalpy change of the reaction was determined to be \Updelta_\textr H_\textm^q = 3 6 9. 4 9 ±0. 5 6   \textkJ·\textmol ^{- 1} . \Updelta_{\text{r}} H_{\text{m}}^{\theta } = 3 6 9. 4 9 \pm 0. 5 6 \;{\text{kJ}}\cdot {\text{mol}}^{ - 1} . According to the above results and the relevant data in the literature, through Hess’ law, the standard molar enthalpy of formation of [Dy(m-NBA)₃phen]₂·4H₂O(s) was estimated to be \Updelta_\textf H_\textm^q \Updelta_{\text{f}} H_{\text{m}}^{\theta } [[Dy(m-NBA)₃phen]₂·4H₂O(s), 298.15 K] = −5525 ± 6 kJ·mol⁻¹.     

The electrochemical polymerization of <Emphasis Type="Italic">o</Emphasis>-phenylenediamine on <Emphasis Type="SmallCaps">l</Emphasis>-tyrosine functionalized glassy carbon electrode and its application

The polymerization of o-phenylenediamine (OPD) on l-tyrosine (Tyr) functionalized glassy carbon electrode (GCE) and its electro-catalytic oxidation towards ascorbic acid (AA) had been studied in this report. l-Tyrosine was first covalently grafted on GCE surface via electrochemical oxidation, which was followed by the electrochemical polymerization of OPD on the l-tyrosine functionalized GCE. Then, the poly(o-phenylenediamine)/l-tyrosine composite film modified GCE (POPD-Tyr/GCE) was obtained. X-ray photo-electron spectroscopy (XPS), field emission scanning electron microscope (SEM), and electrochemical techniques have been used to characterize the grafting of l-tyrosine and the polymerization and morphology of OPD film on GCE surface. Due to the doping of the carboxylic functionalities in l-tyrosine molecules, the POPD film showed good redox activity in neutral medium, and thus, the POPD-Tyr/GCE exhibited excellent electrocatalytic response to AA in 0.1 mol l⁻¹ phosphate buffer solution (PBS, pH 6.8). The anode peak potential of AA shifted from 0.58 V at GCE to 0.35 V at POPD-Tyr/GCE with a greatly enhanced current response. A linear calibration graph was obtained over the AA concentration range of 2.5 × 10⁻⁴–1.5 × 10^–3 mol l⁻¹ with a correlation coefficient of 0.9998. The detection limit (3δ) for AA was 9.2 × 10⁻⁵ mol l⁻¹. The modified electrode showed good stability and reproducibility and had been used for the determination of AA content in vitamin C tablet with satisfactory results.     

New boron-containing bacteriochlorin <Emphasis Type="Italic">p</Emphasis> cycloimide conjugate

A conjugate of the bacteriochlorophyll a derivative with the cobalt bis(dicarbollide) anion [3,3′-Co(1,2-C₂B₉H₁₁)₂]⁻ was synthesized.     

Curing reaction of <Emphasis Type="Italic">o</Emphasis>-cresol-formaldehyde epoxy/LC epoxy(<Emphasis Type="Italic">p</Emphasis>-PEPB)/anhydride(MeTHPA)

The curing kinetics of a bi-component system about o-cresol-formaldehyde epoxy resin (o-CFER) modified by liquid crystalline p-phenylene di[4-(2,3-epoxypropyl) benzoate] (p-PEPB), with 3-methyl-tetrahydrophthalic anhydride (MeTHPA) as a curing agent, were studied by non-isothermal differential scanning calorimetry (DSC) method. The relationship between apparent activation energy E _a and the conversion α was obtained by the isoconversional method of Ozawa. The reaction molecular mechanism was proposed. The results show that the values of E _a in the initial stage are higher than other time, and E _a tend to decrease slightly with the reaction processing. There is a phase separation in the cure process with LC phase formation. These curing reactions can be described by the Šesták–Berggren (S–B) equation, the kinetic equation of cure reaction as follows: \frac\textda\textdt = Aexp( - \fracE_\texta RT )a^m ( 1 - a )ⁿ {\frac{{{\text{d}}\alpha }}{{{\text{d}}t}}} = A\exp \left( { - {\frac{{E_{\text{a}} }}{RT}}} \right)\alpha^{m} \left( {1 - a} \right)^{n} .     

Cloning of a Heat-Stable Chitin Deacetylase Gene from <Emphasis Type="Italic">Aspergillus nidulans</Emphasis> and its Functional Expression in <Emphasis Type="Italic">Escherichia coli</Emphasis>

A gene encoding chitin deacetylase was cloned by polymerase chain reaction from Aspergillus nidulans. Sequencing result showed 40% homology to the corresponding gene from Colletotrichum lindemuthianum. The complete gene contains an open reading frame of 747 nucleotides encoding a sequence of 249 amino acid residues. The chitin deacetylase gene was subcloned into a pET28a expression vector and expressed in Escherichia coli BL21 and then purified by metal affinity chromatography using a His-bind column. The purified chitin deacetylase demonstrated an activity of 0.77 U ml⁻¹ for the glycol chitin substrates, and its specific activity was 4.17 U mg⁻¹ for it. The optimal temperature and pH of the purified enzyme were 50 °C and 8.0, respectively. When glycol chitin was used as the substrate, K _m was 4.92 mg ml⁻¹, and K _cat showed 6.25 s⁻¹, thus the ratio of K _cat and K _m was 1.27 ml s⁻¹ mg⁻¹. The activity of chitin deacetylase was affected by a range of metal ions and ethylenediaminetetraacetic acid.     

Mercury(II) Biosorption Using <Emphasis Type="Italic">Lessonia</Emphasis> sp. Kelp

Lessonia nigrescens and Lessonia trabeculata kelps have been tested for the sorption of mercury from aqueous solutions. A pretreatment (using CaCl₂) allowed stabilizing the biomass that was very efficient for removing Hg(II) at pH 6–7. Sorption isotherms were described by the Langmuir equation with sorption capacities close to 240–270 mg Hg g⁻¹ at pH 6. The temperature had a negligible effect on the distribution of the metal at equilibrium. The presence of chloride anions had a more marked limiting impact than sulfate and nitrate anions. The uptake kinetics were modeled using the pseudo-second-order equation that fitted better experimental data than the pseudo-first-order equation. The particle size hardly influenced sorption isotherms and uptake kinetics, indicating that sorption occurs in the whole mass of the biosorbent and that intraparticle mass transfer resistance was not the limiting rate. Varying the sorbent dosage and the initial metal concentration influenced the equilibrium, but the kinetic parameters were not drastically modified. Metal can be eluted with hydrochloric acid, citric acid, or acidic KI solutions.     

Redox Behavior of Neptunium(V) in Tributyl Phosphate and <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-Dihexyl Octanamide Extractants Dissolved in <Emphasis Type="Italic">n</Emphasis>-Dodecane

Spectrophotometric investigations have been carried out on the disproportionation of Np(V) to form Np(IV) and Np(VI) in 1.1 mol⋅L⁻¹ solutions of tributyl phosphate (TBP) and in N,N-dihexyl octanamide (DHOA) in n-dodecane medium. The Np(V) was found to coordinate with Np(IV) in 1.1 mol⋅L⁻¹ TBP solution in n-dodecane to form a mixed valence “cation–cation” complex by bonding through an axial oxo group on Np(V). By contrast, this interaction was less prominent in the case of 1.1 mol⋅L⁻¹ DHOA solutions. The effect of 1-octanol, added as phase modifier, on the disproportionation behavior of Np(V) was also investigated. An attempt was made to calculate the disproportionation/reduction rate constants for Np(V) under the conditions of these studies. Absorbance measurements on the Np stripped from organic phases revealed the occurrence of Np(V) in the aqueous phase.     

A new cobalt complex of 1-decyl-1<Emphasis Type="Italic">H</Emphasis>-benzo[<Emphasis Type="Italic">d</Emphasis>]imidazole: synthesis,characterization and electrocatalysis

The present work reports on the synthesis, characterization and performance of a new cobalt(II) complex, [Co(C₁₀H₂₁-bim)₂(SCN)₂] (bim = benzimidazole) as electrocatalyst for trichloroacetic acid and bromate reduction. Its structure was characterized by X-ray crystallography, IR spectroscopy and elemental analysis. The cobalt atom adopts a distorted tetrahedral geometry by coordinating to four nitrogen atoms from two thiocyanates and two 1-decyl-1H-benzo[d]imidazole ligands. The electrochemical behavior and electrocatalysis of the title complex bulk-modified carbon paste electrode (Co-CPE) have been studied by cyclic voltammetry. The Co-CPE shows good electrocatalytic activities toward the reduction of trichloroacetic acid and bromate. The detection limit and the sensitivity are 0.02 μM, 34.63 μA μM⁻¹ for trichloroacetic acid detection, and 0.03 μM, 78.92 μA μM⁻¹ for bromate detection, respectively. This modified electrode shows good reproducibility, high stability, low detection limit, technical simplicity and possibility of rapid preparation, which is important for practical application.     

Thermodynamics of cross-linked and branched (co)polymers based on <Emphasis Type="Italic">tris</Emphasis>- and <Emphasis Type="Italic">bis</Emphasis>-(pentafluorophenyl)germanes

The temperature dependence of the heat capacity of cross-linked and branched (co)polymers based on tris- and bis-(pentafluorophenyl)germanes is studied in the temperature range of 6–7 to 535–570 K, using adiabatic vacuum and differential scanning calorimeters. In the indicated temperature range, physical transformations are revealed and their thermodynamic characteristics are determined. The obtained experimental data are used to calculate the thermodynamic functions of (co)polymers: C _p /°, H°(T) - H°(0), S°(T) - S°(0), and G°(T) - H°(0) in the range of T → 0 to 535 K for the branched (co)polymer and from T → 0 to 500 K for the cross-linked polymer. Their standard entropies of formation are determined at 298.15 K. The obtained results are compared with analogous data for hyperbranched perfluorinated polyphenylenegermane studied earlier. The effect of the structure of polyphenylenegermanes on their thermodynamic properties is analyzed.     

Cage Structure Formation of Singly Doped Aluminum Cluster Cations Al<Subscript><Emphasis Type="BoldItalic">n</Emphasis></Subscript><Emphasis Type="BoldItalic">TM</Emphasis><Superscript>+</Superscript> (<Emphasis Type="BoldItalic">TM</Emphasis> = Ti,V, Cr)

Structural information on free transition metal doped aluminum clusters, Al _n TM ⁺ (TM = Ti, V, Cr), was obtained by studying their ability for argon physisorption. Systematic size (n = 5 – 35) and temperature (T = 145 – 300 K) dependent investigations reveal that bare Al _n ⁺ clusters are inert toward argon, while Al _n TM ⁺ clusters attach one argon atom up to a critical cluster size. This size is interpreted as the geometrical transition from surface-located dopant atoms to endohedrally doped aluminum clusters with the transition metal atom residing in an aluminum cage. The critical size, n _crit , is found to be surprisingly large, namely n _crit = 16 and n _crit = 19 – 21 for TM = V, Cr, and TM = Ti, respectively. Experimental cluster–argon bond dissociation energies have been derived as function of cluster size from equilibrium mass spectra and are in the 0.1–0.3 eV range.     

New flavonoid-<Emphasis Type="Italic">C</Emphasis>-glycosides from <Emphasis Type="Italic">Triticum aestivum</Emphasis>

Two new flavonoid-C-glycosides named triticuside A (1a) and triticuside B (1b) were isolated from bran of Triticum aestivum L. The structures of the two new compounds were elucidated by spectral techniques including ¹H NMR, ¹³C NMR as well as HSQC, HMBC, and COSY. Published in Khimiya Prirodnykh Soedinenii, No. 2, pp. 135–137, March–April, 2008.     

Excess Isentropic Compressibilities for 1,3-Dioxolane or 1,4-Dioxane <Emphasis Type="Italic">+</Emphasis> Water <Emphasis Type="Italic">+</Emphasis> Formamide or N,N-Dimethylformamide Ternary Mixtures at 308.15 K

Speeds of sound, u_ijk, of 1,3-dioxolane or 1,4-dioxane (i) + water (j) + formamide or dimethylformamide (k) ternary mixtures and of their binary subsystems, u_ij, of 1,3-dioxolane or 1,4-dioxane (i) + formamide or dimethylformamide (j), and water (i) + formamide or dimethylformamide (j) have been measured over the entire composition range at 308.15 K. The experimental data have been used to evaluate the excess isentropic compressibilities of binary (κ_s^E)_ij and ternary (κ_s^E)_ijk mixtures using their densities calculated from molar excess volume data. The Moelwyn-Huggins concept [M. L. Huggins, Polymer 12, 389 (1971)] of interaction between the surfaces of components of a binary mixture has been employed to evaluate the excess isentropic compressibilities (using the concept of connectivity parameter of third degree of a molecule, ³ξ, which in turn depends on its topology) of binary mixtures, and this method has been extended to predict excess compressibilities of ternary mixtures. Values of (κ_s^E)_ij and (κ_s^E)_ijk have also been calculated by the Flory theory. It was observed that (κ_s^E)_ij and (κ_s^E)_ijk predicted by the Moelwyn-Huggins approach compare well with calculated and experimental values.     

Molar Excess Volumes and Excess Isentropic Compressibilities of Ternary Mixtures Containing <Emphasis Type="Italic">o</Emphasis>-Toluidine

Molar excess volumes, V _ijk ^E, and speeds of sound, U _ijk , of o-toluidine (i) + benzene (j) + cyclohexane or n-hexane or n-heptane (k) ternary mixtures have been measured as a function of composition at 308.15 K. The observed speed of sound data have been utilized to determine the excess isentropic compressibilities, (K _S ^E) _ijk , of the ternary (i+j+k) mixtures. The Moelywn-Huggins concept (Huggins in Polymer 12: 389–399, 1971) of connectivity between the surfaces of the binary mixture constituents has been extended to ternary mixtures (using the concept of a connectivity parameter of third degree of molecules, ³ ξ, which in turn depends on its topology) to obtain an expression that describes well the measured V _ijk ^E and (K _S ^E) _ijk data. The observed data have also been analyzed in terms of Flory’s theory.     

Scale up and Application of Biosurfactant from <Emphasis Type="Italic">Bacillus subtilis</Emphasis> in Enhanced Oil Recovery

There is a lack of fundamental knowledge about the scale up of biosurfactant production. In order to develop suitable technology of commercialization, carrying out tests in shake flasks and bioreactors was essential. A reactor with integrated foam collector was designed for biosurfactant production using Bacillus subtilis isolated from agricultural soil. The yield of biosurfactant on biomass (Y _p/x), biosurfactant on sucrose (Y _p/s), and the volumetric production rate (Y) for shake flask were obtained about 0.45 g g⁻¹, 0.18 g g⁻¹, and 0.03 g l⁻¹ h⁻¹, respectively. The best condition for bioreactor was 300 rpm and 1.5 vvm, giving Y _x/s, Y _p/x, Y _p/s, and Y of 0.42 g g⁻¹, 0.595 g g⁻¹, 0.25 g g⁻¹, and 0.057 g l⁻¹ h⁻¹, respectively. The biosurfactant maximum production, 2.5 g l⁻¹, was reached in 44 h of growth, which was 28% better than the shake flask. The obtained volumetric oxygen transfer coefficient (K _L a) values at optimum conditions in the shake flask and the bioreactor were found to be around 0.01 and 0.0117 s⁻¹, respectively. Comparison of K _L a values at optimum conditions shows that biosurfactant production scaling up from shake flask to bioreactor can be done with K _L a as scale up criterion very accurately. Nearly 8% of original oil in place was recovered using this biosurfactant after water flooding in the sand pack.     

Hydrogen bonding interactions between <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylformamide and cysteine: DFT studies of structures,properties, and topologies

The hydrogen bonding interactions between cysteine and N,N-dimethylformamide (DMF) were studied at the extended hybrid functional DFT-X3LYP/6-311++G(d,p) level regarding their geometries, energies, vibrational frequencies, and topological features of the electron density. The quantum theory of atoms in molecules (QTAIM) and natural bond orbital (NBO) analyses were employed to elucidate the interaction characteristics in the complexes. The results show that two intermolecular hydrogen bonds (H-bonds) are formed in one complex except few complexes with one intermolecular H-bond. The H-bonds involving O atom of DMF as H-bond acceptor usually are red-shifting H-bonds, while the blue-shifting H-bond usually involve methyl of DMF or methenyl of cysteine moiety as H-bond donors. Both hydrogen bonding interaction and structural deformation play important roles in the relative stabilities of the complexes. Due to the π-bond cooperativity, the strongest H-bond is formed between hydroxyl of cysteine moiety and O atom of DMF, however, the serious deformation counteract the hydrogen bonding interaction to a great extent. The complex involves a stronger hydrogen bonding interaction as well as the smaller deformation is the most stable one. The electron density (ρ_b) as well as its Laplacian (∇²ρ_b) at the H-bond critical point predicted by QTAIM is strongly correlated with the H-bond structural parameter (δR _H···Y) and the second-perturbation energies E(2) in the NBO scheme.     

Theoretical Study of the Interactions between Isolated <Emphasis Type="Italic">DNA</Emphasis> Bases and Various Groups IA and IIA Metal Ions by <Emphasis Type="Italic">Ab Initio</Emphasis> Calculations

Summary. Interactions of the DNA bases adenine (A), guanine (G), cytosine (C), and thymine (T) with various metal ions (M) of groups IA and IIA of the periodic table of the elements were studied at the HF, MP2, and DFT levels of theory. The structures and thermodynamic stabilities of these species were studied at the gas phase. The calculations uphold that there exist two active sites in G and one in A, C, and T. The calculations also show that the O² atom in T is a more active site for metal ion bindings than that in C. The stability energies for G … M complexes are larger than those for A … M complexes and the stability energies for T … M complexes are larger than those for C … M complexes. As z/r ratio for the metal ion increases, the interaction energy for the complex increases systematically. Thermodynamic quantities such as ΔH, ΔG, ΔS, and ln K were determined for each complexation reaction, [Base+M ⁿ⁺ →(Base … M) ⁿ⁺]. A, G, and C complexation reactions except for C … Rb⁺ are exothermic. The situation is quite different for T complexation reactions and all except for T … Be²⁺ and T … Mg²⁺ are endothermic.