Microwave‐assisted suzuki coupling reaction for rapid synthesis of conjugated polymer–poly(9,9‐dihexylfluorene)s as an example

Long reaction period (dozens of hours) is often required for the synthesis of conjugated polymers by palladium‐catalyzed Suzuki polymerization reaction. This work shows that microwave can accelerate Suzuki polymerization to realize the ultra‐rapid synthesis of conjugated polymers, here poly(9,9‐dihexylfluorene)s (PDHFs) as an example. The effects of reaction conditions on the polymerization have been systematically investigated, including the mode of microwave irradiation, microwave power, reaction temperature, reaction time, solvents, catalyst species, and catalyst concentrations. Compared with the conventional heating method (oil bath) for the synthesis of PDHFs (48 h, M_w = 20,000 g/mol), Suzuki polymerization under optimized microwave condition can yield PDHFs with higher molecular weight (M_w = 40,000 g/mol) in a much shorter time (14 min). The structures of obtained PDHFs samples are fully characterized spectroscopically, demonstrating well‐defined PDHFs have been prepared through microwave‐assisted (MA) Suzuki polymerization reaction. In addition, the mechanism of MA Suzuki polymerization is proposed preliminarily. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Rapid synthesis of 3-amino-imidazopyridines by a microwave-assisted four-component coupling in one pot

The rapid and efficient synthesis of various 2,6-disubstituted-3-amino-imidazopyridines using a microwave-assisted one-pot cyclization/Suzuki coupling approach is described. The utility of a 2-aminopyridine-5-boronic acid pinacol ester as a robust and versatile building block for the synthesis of diverse compound libraries is emphasized. The boronate functional group is remarkably tolerant to the Lewis acid catalyzed cyclizations, and the subsequent Pd(0)-catalyzed Suzuki coupling reactions proceed cleanly in the presence of magnesium salts. This work highlights the vast potential of microwave-assisted, metal-catalyzed, multicomponent reactions.     

Synthesis and characterization of monodisperse oligofluorenes

An efficient synthesis of 9,9-bis(2-ethylhexyl)fluorene oligomers up to the heptamer is reported, with repetitive Suzuki and Yamamoto coupling reactions employed in the synthesis. The key steps for preparation of the essential intermediates include Pd-catalyzed transformation of aryl bromides to aryl boronic esters (Miyaura reaction) and the application of the much higher reactivity of aryl boronic esters over aryl bromides in the Pd-catalyzed cross-coupling reaction with aryl diazonium salts. Variation of the UV/Vis absorption and photoluminescence characteristics with chain length is reported. Moreover, glass transition and liquid-crystal characteristics of the oligomers are described and compared with those of the polymer.     

One-pot two-step microwave-assisted reaction in constructing 4,5-disubstituted pyrazolopyrimidines

[reaction: see text] A microwave-assisted reaction was developed to facilitate the construction of 4,5-disubstituted pyrazolopyrimidines. This one-pot two-step process involves a sequential S(N)Ar displacement of the C4 chloro substituent with various anilines and amines, followed by a Suzuki coupling reaction with different boronic acids. Using microwave irradiation leads to high product conversion, low side product formation, and shorter reactions.     

Monodisperse fluorene oligomers exhibiting strong dipolar coupling interactions

Well-defined fluorene oligomers (n = 1 to 6) were prepared step by step using Suzuki and Yamamoto couplings, while absorption and photoluminescence properties evidenced very large dipolar coupling interactions between fluorene moieties.     

Suzuki coupling of oxazoles

A protocol for the functionalization of the oxazole 2- and 4-positions using the Suzuki coupling reaction is described. 2-Aryl-4-trifloyloxazoles undergo rapid, microwave-assisted coupling with a range of aryl and heteroaryl boronic acids in good to excellent yields. The methodology is similarly effective using 4-aryl-2-chlorooxazoles as the coupling partner and has been extended to the synthesis of a novel class of homo- and heterodimeric 4,4-linked dioxazoles. [reaction: see text]     

Microwave-assisted Polycondensation of L-2-Hydroxy-3-phenylpropanoic Acid

The attempts to prepare novel biodegradable polymer carriers for drug controlled release systems have been tried in our group1,2. Poly (L-2-hydroxy-3-phenylpropanoic acid) (PLHPPA) can be considered as derivative of poly (lactic acid) (PLA) which has been applied as biomaterials in drug delivery systems, surgical repair and tissue engineering materials3 for its excellent biodegradability and biocompatibility. PLHPPA contains phenyl groups in its structure. It is designed as a hydrophobic…     

Rapid and efficient Pd-catalyzed Sonogashira coupling of aryl chlorides

An efficient and effective microwave-assisted cross-coupling of terminal alkynes with various aryl chlorides including sterically hindered, electron-rich, electron-neutral, and electron-deficient aryl chloride is developed. It proceeds faster and generally gives good to excellent yields and also can be extended successfully to the Suzuki coupling and Buchwald-Hartwig amination, as well as the Heck coupling with inert aryl chlorides. The short reaction times and simple reaction conditions coupling with a broad substrate scope render this method particularly attractive for the efficient preparation of biologically and medicinally interesting molecules.     

Nanoporous phenanthroline polymer locked Pd as highly efficient catalyst for Suzuki-Miyaura Coupling reaction at room temperature

Because of the intrinsic advantages, Suzuki coupling reactions have been one of the most popular coupling reactions in organic synthesis, however developing a high-performance heterogeneous catalyst for Suzuki coupling reactions in aqueous media at low temperature (e.g. room temperature) is still a challenge. Herein, a heterogeneous catalyst with coordinated Pd as active site and a designed conjugated phenanthroline based porous polymer (CPP) as support was fabricated. Systematically investigation on CPP support by Fourier transform infrared spectroscopy (FT-IR), Thermogravimetric analysis (TGA), Transmission electron microscopy (TEM), N₂ adsorption–desorption isotherm and Scanning electron microscopy (SEM) show that the derived CPP catalyst support owns a porous structure, moderately good surface area (141 m²/g) and an excellent thermal stability. As a heterogeneous catalyst for the synthesis of biphenyl derivatives via Suzuki coupling, Pd/CPP achieves an excellent catalytic performance and recycling ability towards Suzuki reaction of various reactants at room temperature in ethanol-water medium.     

Separation and enantioseparation of derivatized amino acids and biogenic amines by high-performance liquid chromatography with reversed and chiral stationary phases

A lignosulfonate sample was fractionated according to the solubility in ethanol-water. The fractions were analysed by aqueous size exclusion chromatography (SEC) combined with in-line multi-angle laser light scattering (MALLS), and by static MALLS. Satisfactory SEC results were obtained with aqueous phosphate buffer containing DMSO and SDS. The refractive index increment (dn/dc) varied from 0.186 to 0.205 ml/g, depending on Mw and the degree of sulfonation. The second viral coefficient (A2) was 7 x 10(-3) ml mol/g2. The weight-average molecular weight (Mw) of the fractions varied from 4600 up to 398 000 g/mol. and the polydispersity (Mw/Mn) varied between 1.3 and 3.5.     

Solution-phase microwave-assisted synthesis of unsubstituted and modified alpha-quinque- and sexithiophenes

The facile synthesis of poorly soluble unsubstituted and modified alpha-quinque- and sexithiophenes under microwave irradiation in the liquid phase is described. The use of microwave irradiation allowed these compounds to be prepared in a few minutes and at high yields by means of the Suzuki cross-coupling reaction. Unsubstituted sexithiophene was obtained in 10 min via the one-pot borylation/Suzuki reaction, purified according to a very simple procedure, and isolated in 84% yield. The efficient synthesis of two new methylated quinque- and sexithiophenes displaying liquid crystalline properties is reported. A new microwave-assisted methodology for the conversion of aldehyde-terminated quinque- and sexithiophenes into the corresponding cyano derivatives is also described. The use of microwaves was extended to the Sonogashira coupling reaction and found to be very effective in the preparation of a quinquethiophene containing acetylenic spacers. The electronic and optical characterization of this compound is reported and discussed in relation to that of unsubstituted quinquethiophene.     

Syntheses of Special Monomers for π-Conjugated Polymers

Summary: Tailored monomers based on the activated esters of 2,5-dibromo-benzoic and 2,5-dibromobenzene-1-sulfonic acids or 3-substituted 2,5-dibromothiophene suitable for the Suzuki, Yamamoto or Grignard metathesis (GRIM) coupling reactions were synthesized and characterized by the melting point, elemental analysis, ¹H NMR, FT IR, and TLC. The Horner-Wadsworth-Emmons reaction was utilized for the preparation of 3-(arylvinyl)-2,5-dibromothiophenes and the 4-nitrophenol or N-hydroxysuccinimide for the preparation of activated esters. A monomer with β-diketone active structure was prepared and characterized as well.     

The kinetics and mechanism of polymer-based NHC-Pd-pyridine catalyzed heterogeneous Suzuki reaction in aqueous media

One of the most important challenges of the Suzuki reaction is a green synthesis of reaction products. In terms of economy and ecology, the Suzuki reaction details must be characterized for the industrial-scale Suzuki reaction processes. In this paper, for the first time, a kinetic and mechanistic study on the Suzuki reaction catalyzed with hydrogel-supported PEPPSI (pyridine-enhanced precatalyst preparation stabilization (and) initiation) type NHC-Pd-pyridine composite has been investigated. To determine the rate-limiting step, the effects of reactants and experimental conditions on the heterogeneous Suzuki reaction have been experimentally defined. The experimental results demonstrated that it is possible to reach 100% yield under the optimum reaction conditions, which were found as 75 × 10⁻³ mol/L of phenylboronic acid (FBA), 50 × 10⁻³ mol/L of bromoacetophenone (Brac), 125 × 10⁻³ mol/L of K₂CO₃, 1 g/L of catalyst, 80°C of reaction temperature, 400 rpm of mixing rate, and 3 h of reaction time. The transmetalation step in the cycle was defined as the rate-limiting step. On the basis of kinetic results, a mathematical reaction rate expression was presented assuming the steady-state approach to steps of the catalytic cycle. The activation energy (E_a) of the reaction was estimated to be 34.88 kJ/mol.     

Highly efficient Suzuki-Miyaura coupling of heterocyclic substrates through rational reaction design

A dicyclohexyl(2-sulfo-9-(3-(4-sulfophenyl)propyl)-9H-fluoren-9-yl)phosphonium salt was synthesized in 64% overall yield in three steps from simple commercially available starting materials. The highly water-soluble catalyst obtained from the corresponding phosphine and [Na(2)PdCl(4)] enabled the Suzuki coupling of a broad variety of N- and S-heterocyclic substrates. Chloropyridines (-quinolines) and aryl chlorides were coupled with aryl-, pyridine- or indoleboronic acids in quantitative yields in water/n-butanol solvent mixtures in the presence of 0.005-0.05 mol % of Pd catalyst at 100 degrees C, chloropurines were quantitatively Suzuki coupled in the presence of 0.5 mol % of catalyst, and S-heterocyclic aryl chlorides and aryl- or 3-pyridylboronic acids required 0.01-0.05 mol % Pd catalyst for full conversion. The key to the high activity of the Pd-phosphine catalyst is the rational design of the reaction parameters (i.e., the presence of water in the reaction mixture, good solubility of reactants and catalyst in n-butanol/water (3:1), and the electron-rich and sterically demanding nature of the phosphine ligand).     

Polymer fractionation using chromatographic column packed with novel regenerated cellulose beads modified with silane

Novel microporous beads with the particle size of about 90 microm were prepared, for the first time, from cellulose and konjac glucomannan (RC/KGM3) in 1.5 M NaOH/0.65 M thiourea aqueous solution by emulsification method. The microporous beads were then modified with silane to avoid the adsorption of polymers containing hydroxyl groups, coded as RC/KGM3-Si. A preparative size-exclusion chromatographic (SEC) column (500 mm x 20 mm) was packed with RC/KGM3-Si, and its exclusion limit and fractionation range of the stationary phase were, respectively, weight-average molecular masses (Mw) of 4.8 x 10(5) g/mol and 5.3 x 10(3)-4.8 x 10(5) g/mol for polystyrene in tetrahydrofuran. The preparative SEC column was used to fractionate poly(epsilon-caprolactone) (PCL, Mw = 8.31 x 10(4) g/mol polydispersity index d= 1.55) in tetrahydrofuran and a polysaccharide PC3-2 (Mw = 1.21 x 10(5) g/mol, d= 1.70) in 0.05 M NaOH aqueous solution, respectively. The Mw values of the fractions determined by analytical SEC combined with laser light scattering were from 1.2 x 10(4) to 1.84 x 10(5) for PCL and from 8.5 x 10(4) to 2.13 x 10(5) for PC3-2, as well as d from 1.2 to 1.5. The results indicated that the preparative SEC has good fractionation efficiency in both organic solvent and alkaline aqueous solution for the various polymers.     

Low polydispersity star polymers via cross-linking macromonomers by ATRP

A new method for the synthesis of star polymers with high molecular weight and narrow molecular weight distribution (MWD) is presented. The star copolymers were prepared by atom transfer radical (co)polymerization (ATRP) of linear macromonomers with divinyl cross-linkers using low molar mass initiator. In contrast to prior "arm-first" procedures with macroinitiators, by using lower ratio of concentration of initiator to MM, the star polymers contained less initiating sites in the core, which decreased the extent of star-star coupling reactions and resulted in formation of star polymers with narrower MWD. Addition of more cross-linker and initiator during the reaction increased the star molecular weight and star yield while retaining the narrow MWD of the star polymer. For example, we synthesized a star polymer with molecular weight Mn = 466 000 g/mol and Mw/Mn < 1.2 in >98% yield.     

Efficient Suzuki-Miyaura coupling of (hetero)aryl chlorides with thiophene- and furanboronic acids in aqueous n-butanol

An efficient Suzuki cross-coupling protocol enables the reaction of N-hetero and normal aryl chlorides with thiophene- and furanboronic acids. Coupling is effected in aqueous n-butanol as the solvent in near quantitative yield with a catalyst loading of 0.1-1 mol %. For heterocyclic substrates aqueous catalysis is found to be more efficient than Suzuki coupling under anhydrous conditions. The developed Suzuki coupling procedure utilizes biodegradable solvents and is useful for large scale reactions, as it includes the facile product separation from a biphasic solvent mixture without the need for additional organic solvents during workup.     

超声辅助的硅中心多孔芳香材料的合成与表征

以四(4-溴苯基)硅烷为基元, 利用超声辅助的Yamamoto 偶联反应, 合成了硅中心的多孔芳香材料(Si-PAF). 通过调节超声参数, 优化了反应条件. 采用红外光谱、 元素分析、 扫描电子显微镜和透射电子显微镜等手段表征了Si-PAF的结构及形貌, 利用氮气吸附实验考察了其孔道结构.     

Reactivity of cyclic sulfamidates towards phosphonate-stabilised enolates: synthesis and applications of alpha-phosphono lactams

Five and six ring a-phosphono lactams 14-20 are available by reaction of 1,2- and 1,3-cyclic sulfamidates respectively with enolates derived from ethyl dialkylphosphonoacetates 3 and 4. Subsequent Wadsworth-Emmons olefination provides the enantiomerically pure exo-alkylidene variants e.g. 25, which is efficiently converted to vinyl triflate 29 (> 98% ee). Suzuki coupling of 29 to a range of aryl and vinyl boronic acids leads to a structurally diverse range of pyrrolidinones exemplified by 30 and 34. The degree of epimerisation at the base-sensitive C(5) stereocentre during the Suzuki coupling of 29 is shown to be dependent on both the nature of the aryl boronic acid and the reaction conditions used.     

Synthesis and characterization of fluorene‐based copolymers containing siloxane or distilbene moieties on their main chain

Two novel types of polyfluorene copolymers containing siloxane linkages or distilbene moieties on their main‐chains were synthesized by Ni(0)‐mediated Yamamoto coupling polymerization. These polymers, designated P2Silo05, P2Silo15, PF‐P02, and PF‐P05 were prepared by copolymerization between 2,7‐dibromo‐9,9′‐dihexylfluorene and bis(bromobenzene)‐terminated disiloxane monomer (for P2Silo05 and P2Silo15) or dibromodistilbene monomer (for PF‐P02 and PF‐P05). All of the polymers were highly soluble in common organic solvents such as chloroform, toluene, and p‐xylene. The glass transition temperatures of the polymers were between 92 and 113 °C, and the decomposition temperatures for a 5% weight loss (T_d) were above 420 °C for all of the polymers, demonstrating high thermal stability. The molecular weight (M_w) of the polymers ranged from 4.2 × 10⁴ to 8.8 × 10⁴. The blue shift of the maximum in the UV‐visible absorption was greater in polymers with a higher molar percentage of siloxane linkages or distilbene moieties than in homo poly (dihexylfluorene) (PDHF). However, the photoluminescence spectra of the polymers were similar to those of PDHF in terms of the onsets and patterns. Single‐layer light‐emitting diodes were fabricated with a configuration of ITO/PEDOT:PSS/polymers/Ca/Al. The maximum electroluminescence emission wavelengths of the polymers were 425–450 nm, corresponding to pure blue light. The CIE co‐ordinates of the polyfluorenes containing siloxane linkages or distilbene moieties ranged from (0.21, 0.21) to (0.17, 0.10), indicating deeper blue light than that of PDHF {CIE co‐ordinates of (0.25, 0.29)}, with P2Silo15 giving the deepest blue‐light {CIE co‐ordinates of (0.17, 0.10)}. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1595–1608, 2009