单可变资源最小化加权完工时间和排序问题的强NP-困难性

Baker和Nuttle提出了下述单可变资源排序问题：扎个工件利用某个单资源进行加工使得工件的完工时间的某个函数达到最小,而资源的可利用率是随着时间而变化的．当最小化的目标函数是工件的加权完工时间和时,Baker和Nuttle猜测该问题是NP-困难的．最近,Yuan、Cheng和Ng证明该问题在一般意义下是NP-困难的,但是问题的精确复杂性仍然是悬而未决的．本文我们证明了该问题是强NP-困难的．     

一个具有两类工件的多目标排序的NP-困难性

文章考虑具有两个工件集的单机排序问题.第一个工件集J1以加权完工时间和为目标函数,第二个工件集J2以最大加权完工时间为目标函数.问题的目标是寻找一种排序,使得两个目标函数的加权和达到最小,并证明该问题是强NP-困难的.     

工件可转包加工的排序问题研究

研究工件可以转包加工的单台机排序问题: 有n个工件, 在零时刻已经到达一个单台机处, 每个工件可以由加工者自有的单台机器加工或者转包给其他机器加工. 如果工件被转包加工, 那么其完工时间等于在自有机器上的加工时间, 而产生的加工费用与在自有机器上加工的费用不同. 假设被转包加工的工件的完工时间和加工费用与转包加工机器的总负载没有关系.目标函数是最小化工件最大完工时间与总加工费用的加权和. 该问题已经被证明是NP-难的. 最后给出该问题的伪多项式时间最优算法, 并且提出一个完全多项式时间近似方案(FPTAS).     

有关单机两代理排序问题的两个结果

研究了两个单机两代理排序问题. 在第一个两代理排序问题中, 代理A的目标函数为极小化所有工件的加权完工时间总和, 代理B的目标函数为极小化最大工件费用. 在第二个两代理排序问题中, 代理A的目标函数为极小化所有工件的加权完工时间总和, 代理B的目标函数为极小化所有工件的最大完工时间. 证明了第一个问题是强NP-难的, 改进了已有的一般意义NP-难的结果; 对第二个问题给出了一个与现有的动态规划算法不同的动态规划算法.     

具有不可用区间且工件可拒绝下的单机重新排序问题的近似方案

本文考虑了机器具有不可用区间且工件可拒绝下的单机重新排序问题,在该问题中,给定一个工件集需在一台机器上加工,每个工件有自己的加工时间和权重,且对该工件集目标函数为极小化总加权完工时间的排序计划已给定,根据该排序计划中每个工件的完工时间已确定每个工件的承诺交付时间。然而,在工件正式开始加工前,原计划用于加工的某段时间区间因临时用于检修机器而导致机器在该时间区间不再可用,需要对工件重新排序。为了确保在新的重新排序中,工件的延误成本不致太大,决策者可以选择拒绝部分工件,但需支付相应的拒绝费用。任务是确定接受工件集和拒绝工件集,并将接受的工件在考虑机器具有不可用区间的条件下重新排序使得接受工件集的总加权完工时间,总拒绝费用及赋权最大延误之和最小。该问题是NP-困难的,对此给出了伪多项式时间动态规划精确算法,利用稀疏技术设计了完全多项式时间近似方案。     

具有线性减少加工时间的资源约束单机排序问题

讨论具有连续资源的单机排序问题.在这一模型中,工件的准备时间是所消耗资源的非负严格减少连续函数,工件的加工时间是开工时间的严格减少线性函数.考虑两类问题,第一类问题的目标函数是在满足最大完工时间限制条件下极小化资源消耗总量.第二类问题的目标函数是在满足资源消耗总量限制条件下极小化最大完工时间.对两类问题讨论了最优排序的某些特征.基于对问题的分析,分别给出了求解最优资源分配的方法.结果表明,加工时间为常数情况的结论对于加工时间是开工时间线性函数的情况仍然成立.     

机器有使用限制的混合恶化排序问题的复杂性

考虑了机器具有使用限制的混合恶化排序问题.其中部分工件的加工时间是固定常数,另一部分的是其开工时间的简单线性函数,工件是不可中断的.文章目标是极小化最大完工时间.对于单机问题,证明了问题是一般意义下的NP-难的,给出了一个4/3-近似算法,并证明了算法界是紧的.对于平行机问题,证明了问题是强NP-难的.     

工作有到达时间且拒绝工件总个数受限的单机平行分批排序问题的近似算法

考虑了工件有到达时间且拒绝工件总个数不超过某个给定值的单机平行分批排序问题.在该问题中,给定一个工件集和一台可以进行批处理加工的机器.每个工件有它的到达时间和加工时间;对于每个工件来说要么被拒绝要么被接受安排在机器的某一个批次里进行加工;一个工件如果被拒绝,则需支付该工件对应的拒绝费用.为了保证一定的服务水平,要求拒绝工件的总个数不超过给定值.目标是如何安排被接受工件的加工批次和加工次序使得其最大完工时间与被拒绝工件的总拒绝费用之和最小.该问题是NP-难的,对此给出了伪多项式时间动态规划精确算法,2-近似算法和完全多项式时间近似方案.     

工件有到达时间且拒绝工件总个数受限的单机平行分批排序问题的近似算法

考虑了工件有到达时间且拒绝工件总个数不超过某个给定值的单机平行分批排序问题.在该问题中,给定一个工件集和一台可以进行批处理加工的机器.每个工件有它的到达时间和加工时间;对于每个工件来说要么被拒绝要么被接受安排在机器的某一个批次里进行加工;一个工件如果被拒绝,则需支付该工件对应的拒绝费用.为了保证一定的服务水平,要求拒绝工件的总个数不超过给定值.目标是如何安排被接受工件的加工批次和加工次序使得其最大完工时间与被拒绝工件的总拒绝费用之和最小.该问题是NP-难的,对此给出了伪多项式时间动态规划精确算法,2-近似算法和完全多项式时间近似方案.     

需要安装时间的平行多功能机排序问题的启发式算法

考虑需要安装时间的平行多功能机排序问题。在该模型中,每个工件对应机器集合的一个子集,其只能在这个子集中的任一台机器上加工,称这个子集为该工件的加工集合;工件分组,同组工件具有相同的加工时间和加工集合,不同组中的工件在同一台机器上连续加工需要安装时间,目标函数为极小化最大完工时间。对该问题NP-难的一般情况设计启发式算法:首先按照特定的规则将所有工件组都整组地安排到各台机器上,然后通过在各机器间转移工件不断改进当前最大完工时间。通过与下界的比较检验算法的性能,大量的计算实验表明,算法是实用而有效的。     

NP-hardness of the single-variable-resource scheduling problem to minimize the total weighted completion time

Baker and Nuttle [K.R. Baker, H.L.W. Nuttle, Sequencing independent jobs with a single resource, Naval Research Logistics Quarterly 27 (1980) 499–510] studied the following single-variable-resource scheduling problem: sequencing n jobs for processing by a single resource to minimize a function of job completion times, when the availability of the resource varies over time. When the objective function to be minimized is the total weighted completion time, Baker and Nuttle conjectured that the problem is NP-hard. We show in this note that the conjecture is true.     

Single-machine scheduling with time-and-resource-dependent processing times

We consider single-machine scheduling problems in which the processing time of a job is a function of its starting time and its resource allocation. The objective is to find the optimal sequence of jobs and the optimal resource allocation separately. We concentrate on two goals separately, namely, minimizing a cost function containing makespan, total completion time, total absolute differences in completion times and total resource cost; minimizing a cost function containing makespan, total waiting time, total absolute differences in waiting times and total resource cost. We show that the problems remain polynomially solvable under the proposed model.     

The strong NP-hardness of the maximum lateness minimization scheduling problem with the processing-time based aging effect

In this paper, we analyse the single machine maximum lateness minimization scheduling problem with the processing time based aging effect, where the processing time of each job is described by a non-decreasing function dependent on the sum of the normal processing times of preceded jobs. The computational complexity of this problem was not determined. However, we show it is strongly NP-hard by proving the strong NP-hardness of the single machine maximum completion time minimization problem with this aging model and job deadlines. Furthermore, we determine the boundary between polynomially solvable and NP-hard cases.     

A note on single-machine scheduling with decreasing time-dependent job processing times

In this note we consider some single-machine scheduling problems with decreasing time-dependent job processing times. Decreasing time-dependent job processing times means that its processing time is a non-increasing function of its execution start time. We present polynomial solutions for the sum of squared completion times minimization problem, and the sum of earliness penalties minimization problem subject to no tardy jobs, respectively. We also study two resource constrained scheduling problems under the same decreasing time-dependent job processing times model and present algorithms to find their optimal solutions.     

On the complexity of project scheduling to minimize exposed time

We consider project scheduling where the project manager’s objective is to minimize the time from when an adversary discovers the project until the completion of the project. We analyze the complexity of the problem identifying both polynomially solvable and NP-hard versions of the problem. The complexity of the problem is seen to be dependent on the nature of renewable resource constraints, precedence constraints, and the ability to crash activities in the project.     

Unrelated parallel machines scheduling with deteriorating jobs and resource dependent processing times

We consider unrelated parallel machines scheduling problems involving resource dependent (controllable) processing times and deteriorating jobs simultaneously, i.e., the actual processing time of a job is a function of its starting time and its resource allocation. Two generally resource consumption functions, the linear and convex resource, were investigated. The objective is to find the optimal sequence of jobs and the optimal resource allocation separately. This paper focus on the objectives of minimizing a cost function containing makespan, total completion time, total absolute differences in completion times and total resource cost, and a cost function containing makespan, total waiting time, total absolute differences in waiting times and total resource cost. If the number of unrelated parallel machines is a given constant, we show that the problems remain polynomially solvable under the proposed model.     

NP-hard cases in scheduling deteriorating jobs on dedicated machines

In this paper problems of time-dependent scheduling on dedicated machines are considered. The processing time of each job is described by a function which is dependent on the starting time of the job. The objective is to minimise the maximum completion time (makespan). We prove that under linear deterioration the two-machine flow shop problem is strongly NP-hard and the two-machine open shop problem is ordinarily NP-hard. We show that for the three-machine flow shop and simple linear deterioration there does not exist a polynomial-time approximation algorithm with the worst case ratio bounded by a constant, unless P=NP. We also prove that the three-machine open shop problem with simple linear deterioration is ordinarily NP-hard, even if the jobs have got equal deterioration rates on the third machine.     

Single-machine scheduling with convex resource dependent processing times and deteriorating jobs

In this study, we consider scheduling problems with convex resource dependent processing times and deteriorating jobs, in which the processing time of a job is a function of its starting time and its convex resource allocation. The objective is to find the optimal sequence of jobs and the optimal convex resource allocation separately. This paper focus on the single-machine problems with objectives of minimizing a cost function containing makespan, total completion time, total absolute differences in completion times and total resource cost, and a cost function containing makespan, total waiting time, total absolute differences in waiting times and total resource cost. It shows that the problems remain polynomially solvable under the proposed model.