Mechanisms of metal ion transfer into room-temperature ionic liquids: the role of anion exchange

The structure and stoichiometry of the lanthanide(III) (Ln) complexes with the ligand 2-thenoyltrifluoroacetone (Htta) formed in a biphasic aqueous room-temperature ionic liquid system have been studied by complementary physicochemical methods. Equilibrium thermodynamics, optical absorption and luminescence spectroscopies, high-energy X-ray scattering, EXAFS, and molecular dynamics simulations all support the formation of anionic Nd(tta)4(-) or Eu(tta)4(-) complexes with no water coordinated to the metal center in 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide (C4mim+Tf2N(-)), rather than the hydrated, neutral complexes, M(tta)(3)(H2O)n)(n = 2 or 3), that form in nonpolar molecular solvents, such as xylene or chloroform. The presence of anionic lanthanide complexes in C4mim+Tf2N(-) is made possible by the exchange of the ionic liquid anions into the aqueous phase for the lanthanide complex. The resulting complexes in the ionic liquid phase should be thought of as weak C4mim+Ln(tta)4(-) ion pairs which exert little influence on the structure of the ionic liquid phase.     

Self-assembly of nonionic surfactants into lyotropic liquid crystals in ethylammonium nitrate, a room-temperature ionic liquid

The stability of a variety of lyotropic liquid crystals formed by a number of polyoxyethylene nonionic surfactants in the room-temperature ionic liquid ethylammonium nitrate (EAN) is surveyed and reported. The pattern of self-assembly behaviour and mesophase formation is strikingly similar to that observed in water, even including the existence of a lower consolute boundary or cloud point. The only quantitative difference from water is that longer alkyl chains are necessary to drive the formation of liquid crystalline mesophases in EAN, suggesting that a rich pattern of "solvophobic" self-assembly should exist in this solvent.     

Electrodeposition of platinum nanoparticles in a room-temperature ionic liquid

The electrochemistry of the [PtCl(6)](2-)-[PtCl(4)](2-)-Pt redox system on a glassy carbon (GC) electrode in a room-temperature ionic liquid (RTIL) [i.e., N,N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium tetrafluoroborate (DEMEBF(4))] has been examined. The two-step four-electron reduction of [PtCl(6)](2-) to Pt, i.e., reduction of [PtCl(6)](2-) to [PtCl(4)](2-) and further reduction of [PtCl(4)](2-) to Pt, occurs separately in this RTIL in contrast to the one-step four-electron reduction of [PtCl(6)](2-) to Pt in aqueous media. The cathodic and anodic peaks corresponding to the [PtCl(6)](2-)/[PtCl(4)](2-) redox couple were observed at ca. -1.1 and 0.6 V vs a Pt wire quasi-reference electrode, respectively, while those observed at -2.8 and -0.5 V were found to correspond to the [PtCl(4)](2-)/Pt redox couple. The disproportionation reaction of the two-electron reduction product of [PtCl(6)](2-) (i.e., [PtCl(4)](2-)) to [PtCl(6)](2-) and Pt metal was also found to occur significantly. The electrodeposition of Pt nanoparticles could be carried out on a GC electrode in DEMEBF(4) containing [PtCl(6)](2-) by holding the potential at -3.5 or -2.0 V. At -3.5 V, the four-electron reduction of [PtCl(6)](2-) to Pt can take place, while at -2.0 V the two-electron reduction of [PtCl(6)](2-) to [PtCl(4)](2-) occurs. The results obtained demonstrate that the electrodeposition of Pt at -3.5 V may occur via a series of reductions of [PtCl(6)](2-) to [PtCl(4)](2-) and further [PtCl(4)](2-) to Pt and at -2.0 V via a disproportionation reaction of [PtCl(4)](2-) to [PtCl(6)](2-) and Pt. Furthermore, the deposition potential of Pt nanoparticles was found to largely influence their size and morphology as well as the relative ratio of Pt(110) and Pt(100) crystalline orientation domains. The sizes of the Pt nanoparticles prepared by holding the electrode potential at -2.0 and -3.5 V are almost the same, in the range of ca. 1-2 nm. These small nanoparticles are "grown" to form bigger particles with different morphologies: In the case of the deposition at -2.0 V, the GC electrode surface is totally, relatively compactly covered with Pt particles of relatively uniform size of ca. 10-50 nm. On the other hand, in the case of the electrodeposition at -3.5 V, small particles of ca. 50-100 nm and the grown-up particles of ca. 100-200 nm cover the GC surface irregularly and coarsely. Interestingly, the Pt nanoparticles prepared by holding the potential at -2.0 and -3.5 V are relatively enriched in Pt(100) and Pt(110) facets, respectively.     

Anion concentration-dependent partitioning mechanism in the extraction of uranium into room-temperature ionic liquids

The mode of partitioning of uranyl ion between nitrate-containing aqueous phases and various N,N'-dialkylimidazolium-based room-temperature ionic liquids (RTILs) in the presence of tri-n-butyl phosphate (TBP) is shown to change from an ion-exchange process to one involving extraction of a neutral uranyl-TBP-nitrato complex as the aqueous nitrate concentration is increased. Increasing the hydrophobicity of the RTIL cation eventually leads to nitrato complex extraction as the predominant mode of partitioning, regardless of nitrate concentration.     

Heterogeneous electron transfer at Au/SAM junctions in a room-temperature ionic liquid under pressure

Proven electrochemical approaches were applied to study heterogeneous electron transfer (ET) between selected redox couples and gold electrodes modified with alkanethiol self-assembled monolayers (SAMs), using the room-temperature ionic liquid (RTIL) [bmim][NTf2] as reaction medium; ferrocene as freely diffusing redox probe in the RTIL was tested for ET through both thin (butanethiol) and thick (dodecanethiol) assemblages at pressures up to 150 MPa; well behaved kinetic patterns and reproducibility of data were demonstrated for ET within the unique Au/SAM/RTIL arrays.     

Kinetics of ion transfer at the ionic liquid/water nanointerface

Ion transfer (IT) processes in ionic liquids (ILs) are essential for their applications in electrochemical systems and chemical separations. In this Article, the first measurements of IT kinetics at the IL/water interface are reported. Steady-state voltammetry was performed at the nanometer-sized polarizable interface between water and ionic liquid, [THTDP(+)][C(4)C(4)N(-)], immiscible with it that was formed at the tip of a nanopipet. Kinetic measurements at such interfaces are extremely challenging because of slow mass-transfer rates in IL, which is ～700 times more viscous than water. The recently developed new mode of nanopipet voltammetry, common ion voltammetry, was used to overcome technical difficulties and ensure the reliability of the extracted kinetic parameters of IT. The results suggest that the rate of interfacial IT depends strongly on solution viscosity. Voltammetric responses of nanopipets of different radii were analyzed to evaluate the effect of the electrical double layer at the liquid/liquid interface on IT kinetics. The possibility of the influence of the charged pipet wall on ion transport was investigated by comparing currents produced by cationic and anionic species. Possible effects of relaxation phenomena at the IL/water interface on IT voltammograms have also been explored.     

Anisotropic ionogels of sodium laurate in a room-temperature ionic liquid

Anisotropic thermally reversible ionogels of sodium laurate (SL) were prepared in the first discovered room-temperature ionic liquid (RTIL), ethylammonium nitrate (EAN). Polarized optical microscope images indicate that the gels are birefringent, illuminating the presence of anisotropic structures. Small-angle X-ray scattering results reveal that SL and lauric acid (LA) molecules are arranged to form lamellar structures, but no SL crystallites were confirmed by the X-ray diffraction measurements. With an increase of the SL concentration, the interlayer distance decreases. Rheological measurements indicate that the anisotropic ionogels are highly viscoelastic and the storage modulus (G') increases with an increase of the SL concentration in EAN. Electrochemical measurements indicate that the anisotropic ionogels may have potential applications in electrochemical fields. The intermolecular hydrogen bond as well as the solvatophobic interaction of SL and LA formed by a chemical reaction, CH(3)(CH(2))(10)COONa + CH(3)CH(2)NH(3)NO(3) --> CH(3)CH(2)NH(2) upward arrow + NaNO(3) downward arrow + CH(3)(CH(2))(10)COOH, can play a role in the formation of three-dimensional networks having lamellar structures which are responsible for the anisotropic ionogels. The formation of anisotropic ionogels by surfactants in RTILs could be a new phenomenon, but this is not a very classic case of organogels.     

Hydrodynamic voltammetry at the liquid|liquid interface: facilitated ion transfer and the rotating diffusion cell

A new approach to the voltammetric investigation of facilitated ion transfer processes is reported. The technique uses a rotating diffusion cell approach to induce laminar flow in the organic phase of a liquid|liquid electrochemical cell. The interface between two immiscible electrolyte solutions (ITIES) was stabilised against rotation with either γ-alumina or a track-etched polyester membrane. The resultant voltammetry is shown to be consistent with the Koutecký–Levich equation enabling kinetic parameters associated with facilitated transfer of sodium by dibenzo-18-crown-6 across the water|1,2-dichloroethane interface to be evaluated. In particular, the use of the more hydrophilic alumina membrane permits the uncertainties regarding the use of the membrane-stabilised ITIES, namely the interfacial position, to be eliminated.     

二环己基-18冠-6加速锶离子在微米管支撑的水/1,2-二氯乙烷界面上的转移反应

采用玻璃微米管支撑的液/液界面通过循环伏安法(CV)研究了二环己基-18冠6(DCH18C6)加速Sr2+在水/1,2-二氯乙烷(W/DCE)界面上的转移反应,考察了DCH18C6加速Sr2+在W/DCE界面转移的影响因素,如DCH18C6和Sr2+浓度等,并求算其络合物的稳定常数。实验结果表明,Sr2+与DCH18C6发生的是一个1:1的扩散控制的界面络合转移过程,其络合常数β为5.31×1023。本研究可为理解溶剂萃取Sr2+行为提供基础理论数据。     

High-pressure testing of heterogeneous charge transfer in a room-temperature ionic liquid: evidence for solvent dynamic control

We report the first application of a high-pressure electrochemical strategy to study heterogeneous charge transfer (CT) in a room-temperature ionic liquid, [BMIM][BTA]. High-pressure kinetic studies on electron exchange for two redox couples of different charge type, viz. [Fe(bipy)3]3+/2+ and [Fe(cp)2]+/0, at bare Au electrodes within the range of 0.1-150 MPa, revealed large positive volumes of activation that were found to be virtually the same for the two redox couples in terms of the CT rate constants and diffusion coefficients, despite the reactant's charge type. Independent viscosity (fluidity) studies at elevated pressure (up to 175 MPa), were also performed and revealed a pressure coefficient closely resembling the former ones. Complementary temperature-dependent kinetic studies within the range of 298-358 K also revealed the virtual similarity in activation enthalpies for the same kinetic and diffusion processes, as well as the viscosity of [BMIM][BTA]. A rigorous analysis of the complete variety of obtained results strongly indicates that dynamic (frictional) control of CT is operative by way of the full adiabatic mechanism. The contribution of the Franck-Condon term to the activation free energy of the kinetic process seems almost diminished because of the high value of electronic coupling and freezing out of the outer-sphere reorganization energy. Further analyses indicate that frictional control most probably takes place through slow translational modes (implying "minimal volume" cooperative dislocations) of constituent ions. This kind of motion seems further slowed down within the vicinity of the active site presumably located within the diffusive-like zone situated next to the compact (first) part of the metal/ionic liquid junction.     

一种新型24-冠-8醚推动钠离子转移的机理研究

本文应用计时电位法和电流扫描极谱法研究了一种新冠醚, 2,3,14,15-四(邻甲氧基)苯基-1,4,7,10,13,16,19,22-八氧杂-二十四环-2,14-二烯(BDI,1),在两相分配时对水相中Na^+推动转移机理。     

Vibrational energy relaxation of a diatomic molecule in a room-temperature ionic liquid

Vibrational energy relaxation (VER) dynamics of a diatomic solute in ionic liquid 1-ethyl-3-methylimidazolium hexafluorophosphate (EMI(+)PF(6) (-)) are studied via equilibrium and nonequilibrium molecular dynamics simulations. The time scale for VER is found to decrease markedly with the increasing solute dipole moment, consonant with many previous studies in polar solvents. A detailed analysis of nonequilibrium results shows that for a dipolar solute, dissipation of an excess solute vibrational energy occurs almost exclusively via the Lennard-Jones interactions between the solute and solvent, while an oscillatory energy exchange between the two is mainly controlled by their electrostatic interactions. Regardless of the anharmonicity of the solute vibrational potential, VER becomes accelerated as the initial vibrational energy increases. This is attributed primarily to the enhancement in variations of the solvent force on the solute bond, induced by large-amplitude solute vibrations. One interesting finding is that if a time variable scaled with the initial excitation energy is employed, dissipation dynamics of the excess vibrational energy of the dipolar solute tend to show a universal behavior irrespective of its initial vibrational state. Comparison with water and acetonitrile shows that overall characteristics of VER in EMI(+)PF(6) (-) are similar to those in acetonitrile, while relaxation in water is much faster than the two. It is also found that the Landau-Teller theory predictions for VER time scale obtained via equilibrium simulations of the solvent force autocorrelation function are in reasonable agreement with the nonequilibrium results.     

Lithium secondary batteries using modified-imidazolium room-temperature ionic liquid

Highly reversible, safe lithium secondary batteries that use imidazolium-cation-based room-temperature ionic liquid as an electrolyte and lithium metal as an anode material were realized by the molecular design. To achieve higher reduction stability, an electron-donating substituent was introduced to promote charge delocalization in the imidazolium cation of room-temperature ionic liquids.     

Chemistry in heterocyclic ammonium fluorohydrogenate room-temperature ionic liquid

Investigation on alkali fluoride-HF system has been initiated in the 19th century. The technique is currently utilized in fluorine-chemical industry. But, the problem is that this system readily releases hazardous HF. Although organic base, e.g., amine, with HF, which is mainly applied to fluorination treatment for organic compound, reduces the HF release, the solution still requires careful handling because of limited amount of free HF. Recently family of fluorohydrogenate room-temperature ionic liquid, XF(HF)_2.3, that consists of heterocyclic ammonium cation (X⁺), F(HF)₂⁻, and F(HF)₃⁻, has gotten a lot of attentions due to the interesting physicochemical properties such as negligible vapor pressure (<7.5 × 10⁻³ Torr (=1 Pa) at 298 K), high conductivity, and low corrosiveness. This novel solvent will greatly contribute to development of fluorine chemistry. In this article, fundamental techniques and physicochemical data on the fluorohydrogenate RTIL are summarized, and molecular science in the dialkylimidazolium fluorohydrogenates leading to the understanding of the unusual properties is reviewed based on recent experimental and theoretical considerations.     

Interfacial ion pairing at the interface between water and a room-temperature ionic liquid, N-tetradecylisoquinolinium bis(pentafluoroethylsulfonyl)imide

The specific interaction of N-tetradecylisoquinolinium (C(14)Iq+) with Cl- and Br- has been detected in the voltammetry of ion transfer and electrocapillarity at the interface between an aqueous solution (W) and a room-temperature ionic liquid (RTIL), N-tetradecylisoquinolinium bis(pentafluoroethylsulfonyl)imide ([C(14)Iq+][C(2)C(2)N-]). This specific interaction also makes the transfer of Cl- and Br- into [C(14)Iq+][C(2)C(2)N-] energetically more favorable in comparison with that of F- and SO(4)(2-). The width of the polarized potential window in ion-transfer voltammetry at the [C(14)Iq+][C(2)C(2)N-]|W interface is significantly narrower because of the transfer of anions from W to RTIL. The degree of affinity of the anion with C(14)Iq+ agrees with the Hofmeister series. Such an ion-pair formation of anions in W with cations in the RTIL is much weaker when the cation constituting the RTIL is a symmetric tetraheptylammonium ion.     

Reversed-phase liquid chromatographic method for the determination of selected room-temperature ionic liquid cations

The separation of selected 1-alkyl- and 1-aryl-3-methylimidazolium-based room temperature ionic liquid cations has been performed using reversed-phase high-performance liquid chromatography with electrospray ionization mass detection. The RP-HPLC method development started with the selection of a column taking into account especially the resolution of low molecular congeners of the selected group. Mobile phase composition was optimized for peak resolution, sensitivity and high reproducibility of retention values. The results of the method development were applied to the determination of exemplary ionic liquid species present in the medium used in cytotoxicity studies.     

Molecular insights into the potential and temperature dependences of the differential capacitance of a room-temperature ionic liquid at graphite electrodes

Molecular dynamics simulation studies of the structure and the differential capacitance (DC) for the ionic liquid (IL) N-methyl-N-propylpyrrolidinium bis(trifluoromethane)sulfonyl imide ([pyr(13)][TFSI]) near a graphite electrode have been performed as a function temperature and electrode potential. The IL exhibits a multilayer structure that extends 20-30 ? from the electrode surface. The composition and ion orientation in the innermost layer were found to be strongly dependent on the electrode potential. While at potentials near the potential of zero charge (PZC), both cations and anions adjacent to the surface are oriented primarily perpendicular to the surface, the counterions in first layer orient increasingly parallel to the surface with increasing electrode potential. A minimum in DC observed around -1 V(RPZC) (potential relative to the PZC) corresponds to the point of highest density of perpendicularly aligned TFSI near the electrode. Maxima in the DC observed around +1.5 and -2.5 V(RPZC) are associated with the onset of "saturation", or crowding, of the interfacial layer. The asymmetry of DC versus electrode polarity is the result of strong interactions between the fluorine of TFSI and the surface, the relatively large footprint of TFSI compared to pyr(13), and the tendency of the propyl tails of pyr(13) to remain adsorbed on the surface even at high positive potentials. Finally, an observed decreased DC and the disappearance of the minimum in DC near the PZC with increasing temperature are likely due to the increasing importance of entropic/excluded volume effects (interfacial crowding) with increasing temperature.     

Nano-indentation of a room-temperature ionic liquid film on silica: a computational experiment

We investigate the structure of the [bmim][Tf(2)N]/silica interface by simulating the indentation of a thin (4 nm) [bmim][Tf(2)N] film by a hard nanometric tip. The ionic liquid/silica interface is represented in atomistic detail, while the tip is modelled by a spherical mesoscopic particle interacting via an effective short-range potential. Plots of the normal force (F(z)) on the tip as a function of its distance from the silica surface highlight the effect of weak layering in the ionic liquid structure, as well as the progressive loss of fluidity in approaching the silica surface. The simulation results for F(z) are in near-quantitative agreement with new AFM data measured on the same [bmim][Tf(2)N]/silica interface under comparable thermodynamic conditions.