Synthesis of a New Chiral Ligand Containing 1,5—Diazacyclooctane and the Application in Diethyl Zinc Addition to Benzaldehyde

A new chiral tetradentate ligand (S,S)-1,5-bis (4-benzyloxazolin-2-yl-methyl)-1,5-diazacyclo-octane I has been synthesized and the application of 1 as catalyst in the enantioselective addition of diethyl zinc to benzaldehyde is also described.     

Novel Chiral Aminophosphine Ligand:Synthesis and Application in Saymmetric Catalytic Hydrogenation Reaction

A new chiral aminophosphine ligand 6,6′-dimethoxy-2,2′-bis(diphenylphosphinoamino)biphenyl(DMBDPPABP) was prepared and its rhodium complex was found to be an effective catalyst for the asymmetric hydrogenation of amidoacrylic acid and its dervatives.The effects of solvent and reaction temperature on enantioselectivity were also studied.     

An Efficient Method for Catalytic Asymmetric Reduction of Diketones and Application of Synthesis to Chiral 2,5- Diphenylpyrrolidine and 2,5-Diphenylthiolane

Asymmetric reduction of diketones with borane reagents generated in situ using cheap and available NaBH_4 andSnCl_2 in the presence of(S)-(-)-α,α-diphenyl-2-pyrrolidinemethanol was successfully achieved to yield the corre-sponding chiral diols with excellent stereoselectivity and enantioselectivity.And the chiral diol was transformedinto optically pure C_2-symmetricl chiral amine or thioether.     

Solution-grown aligned crystals of diketopyrrolopyrroles(DPP)-based small molecules:Rough surfaces and relatively low charge mobility

Field-effect transistors(FETs) of three diketopyrrolopyrroles(DPP)-based small molecules, 3,6-bis(5-phenylthiophene-2-yl)-2,5-bis(2-ethylhexyl)pyrrolopyrrole-1,4-dione(PDPPP), 3,6-bis(5-(4-fluorophenyl)thiophene-2-yl)-2,5-bis(2-ethylhexyl)pyrrolo pyrrole-1,4-dione(FPDPPPF) and 3,6-bis(5-(4-n-butylphenyl)thiophene-2-yl)-2,5-bis(2-ethylhexyl)pyrrolo pyrrole-1,4-dione(Bu PDPPPBu), have been studied in this work. Well aligned crystals of the three molecules were grown from para-xylene by droplet-pinned crystallization method. FETs based on these aligned crystals exhibit a hole mobility up to0.19 cm~2 V 1s 1and electron mobility up to 0.008 cm~2 V 1s 1. The achieved hole mobility is of the same order of magnitude as reported highest hole mobility for DPP-based small molecules, but it is much lower than that of the high-performance DPP-based polymers. The relative low mobility is mainly attributed to the rough crystal surfaces with steps and, thus, non-smooth charge transport channels at the interfaces between the crystals and the dielectrics. This work has implications for understanding the low charge mobility of DPP-based small molecules.     

Helix-sense-selective radical polymerization of bulky styrenic monomers: chiral induction and liquid crystallinity

Eight chiral vinylterphenyl monomers,(+)-2,5-bis{4′-[(S)-1″-methylpropyloxy]phenyl}styrene(Ia),(+)-2,5-bis{4′-[(S)-2″-methylbutyloxy]phenyl}styrene(Ib),(+)-2,5-bis{4′-[(S)-3″-methylpentyloxy]phenyl}styrene(Ic),(+)-2,5-bis{4′-[(S)-4″-methylhexyloxy]phenyl}styrene(Id),(?)-2,5-bis{4′-[(R)-1″-methylpropyloxy]phenyl}styrene(Ie),(+)-2-{4′-[(S)-1″-methylpropyloxy]phenyl}-5-{4′-[(R)-1″-methylpropyloxy]phenyl}styrene(IIa),(?)-2-{4′-[(R)-1″-methylpropyloxy]phenyl}-5-{4′-[(S)-1″-methylpropyloxy]phenyl}styrene(IIb),and(+)-2-{4′-[(S)-2′′-methylbutyloxy]phenyl}-5-{4′-[(S)-1″-methylpropyloxy]phenyl}styrene(III),were synthesized and radically polymerized.These molecules were designed to further understand long-range chirality transfer in radical polymerization and to possibly tune the chiroptical properties of the polymers by varying the spatial configuration,position,and various combination of the stereogenic centers at the ends of p-terphenyl pendants.The resultant polymers adopted helical conformations with a predominant screw sense.When the stereogenic centers ran away from the terphenyl group as in Ib?d,the corresponding polymers changed the direction of optical rotation in an alternative way and showed no obvious stereomutation upon annealing in tetrahydrofuran.The two stereogenic centers of IIa,IIb,and III acted concertedly in chiral induction,whereas those of Ia and Ie played a counteractive role.The five polymers derived from Ia,Ie,IIa,IIb,and III underwent stereomutation when annealed in tetrahydrofuran.The polymers PIa?e had good thermal stability and high glass transition temperatures(Tgs).They generated liquid crystalline phases at above Tgs that could be kept upon cooling,with the exception of PIe.This result was consistent with the extended helical structures.     

(R)-1，1′-联萘手性单元通过溶胶凝胶法合成杂化硅干凝胶(英)

Precursor molecule (R)-6,6′-bis(triethoxysilylethen-2-yl)-2,2′-di(methoxyethoxymethyloxy)-1,1′-binaphthyl (R-2) was synthesized by Pd-catalyzed Heck reaction of (R)-6,6′-dibromo-2,2′-di(methoxyethoxymethyloxy)-1,1′-binaphthyl (R-1) intermediate with vinyltriethoxysilane. The hydrolysis and polycondensation of the precursor R-2 produced the corresponding xerogel. Both precursor and xerogel were analysed by NMR, FTIR, UV, CD spectra, fluorescent spectroscopy, polarimetry and elemental analysis. The precursor and xerogel can emit strong blue fluorescence and are expected to have a potential application in the separation of chiral molecules as fluorescent sensor. The precursor exhibits strong Cotton effect in its circular dichroism (CD) spectrum indicating a highly rigid structure.     

Synthesis of a New Ligand Containing 1,7—Diaza—12—crown—4 and the Application in Asymmetric Cyclopropanation Reaction

A new chiral multidenate ligand (S,S)-1,7-bis(4-benzyloxazolin-2-yl-methyl)-1,7-diaza-12-crown-4 1 has been synthesized and used as ligand in the copper catalyzed asymmetric cyclopropanation of 1,1-diphenylethylene.     

Chiral Guanidine Catalyzed Annulation to the Core Structure of （－）－Huperzine A

A bridged bicydic compound (7), the key intermediate for the synthesis of ( - )-huperzine A (1), was prepared by diastereoselective Michael-aldol annulatlon of β-keto ester (4) catalyzed by chiral guanidine (2). A variety of chiral catalysts, substrates and reaction conditions were tested.     

Chiral Borated Esters in Asymmetric Synthesis： 1. The First Asymmetric Reaction Catalyzed by Chiral Spiroborated Esters with an O3BN Framework

The first asymmetric reaction catalyzed by chiral spiroborated esters with an O3BN framework was reported. In the presence of 0.1 equivalent of (R,S)-1 or (S,S)-1, acetophenone was reduced by 0.6 equivalent of borane in THF at 0-5℃ for 2 h to give (R)-1-phenylethanol of up to 76% ee and 73% isolated yield. Influence of reaction conditions on the stereoselectivity of the reduction was investigated and a possible catalytic mechanism of the chiral spiroborated esters toward the reduction was also suggested.     

SYNTHESIS OF POLYBINAPHTHYLS INCORPORATING CHIRAL （R）-1,1′-BI-2,2′-NAPHTHOL ENTITIES WITH p-DIVINYLBENZENE BY Pd-CATALYZED HECK REACTION

Polymer (Ⅰ) and polymer (Ⅱ) were obtained by the polymerization of (R)-6,6′-dibromo-2,2′-binaphtho-20-crown-6 (M-l) and (R)-6,6′-dibromo-2,2′-di(methoxyethoxymethyloxy)-1,1′-binaphthyl (M-2) with p-divinylbenzene under Pdcatalyzed Heck reaction. The UV, fluorescence and CD spectra of polymer (Ⅰ) and (Ⅱ) are similar due to the same linkers present in their polymer chain. Polymers (Ⅰ) and (Ⅱ) can emit strong blue fluorescence and are expected to have potential applications in polarized blue-light emitting sensors. The chiral conjugated polymers (Ⅰ) and (Ⅱ) exhibit a strong Cotton effect in their circular dichroism (CD) spectra, indicating a high rigidity of polymer backbone.     

Flip‐type disorder in 3‐substituted 2,2′:5′,2′′‐terthiophenes

In the crystal structures of four thiophene derivatives, (E)‐3′‐[2‐(anthracen‐9‐yl)ethenyl]‐2,2′:5′,2′′‐terthiophene, C₂₈H₁₈S₃, (E)‐3′‐[2‐(1‐pyrenyl)ethenyl]‐2,2′:5′,2′′‐terthiophene, C₃₀H₁₈S₃, (E)‐3′‐[2‐(3,4‐dimethoxyphenyl)ethenyl]‐2,2′:5′,2′′‐terthiophene, C₂₂H₁₈O₂S₃, and (E,E)‐1,4‐bis[2‐(2,2′:5′,2′′‐terthiophen‐3′‐yl)ethenyl]‐2,5‐dimethoxybenzene, C₃₆H₂₆O₂S₆, at least one of the terminal thiophene rings is disordered and the disorder is of the flip type. The terthiophene fragments are far from being coplanar, contrary to terthiophene itself. The central C—C=C—C fragments are almost planar but the bond lengths suggest slight delocalization within this fragment. The crystal packing is determined by van der Waals interactions and some weak, relatively short, C—H...S and C—H...π directional contacts.     

Reaction between Furan‐ or Thiophene‐2‐carbonyl Chloride,Isocyanides, and Dialkyl Acetylenedicarboxy­lates: Multicomponent Synthesis of 2,2′‐Bifurans and 2‐(Thiophen‐2‐yl)furans

An efficient multi‐component synthesis of highly functionalized 2,2′‐bifurans and 2‐(thiophen‐2‐yl)furans is described. A mixture of furan‐ or thiophene‐2‐carbonyl chloride, an isocyanide, and a dialkyl acetylenedicarboxylate undergoes a smooth addition reaction in dry CH₂Cl₂ at ambient temperature to produce 2‐amino‐5‐(4‐chlorofuran‐2‐yl)furan‐3,4‐dicarboxylates and 2‐amino‐5‐(4‐chlorothiophen‐2‐yl)furan‐3,4‐dicarboxylates. A single‐crystal X‐ray‐analysis of a derivative conclusively confirms the structure of these 2,2′‐bifurans and 2‐(thiophen‐2‐yl)furans. A novel electrophilic aromatic substitution reaction can justify the formation of the Cl‐substituted furan or thiophene rings.     

Synthesis of Some New 2‐Oxo‐N‐[(10H‐phenothiazin‐10‐yl)alkyl] Derivatives of Azetidine‐1‐carboxamides

The synthesis of a new series of 4‐aryl‐3‐chloro‐2‐oxo‐N‐[3‐(10H‐phenothiazin‐10‐yl)propyl]azetidine‐1‐carboxamides, 4a – 4m , is described. Phenothiazine on reaction with Cl(CH₂)₃Br at room temperature gave 10‐(3‐chloropropyl)‐10H‐phenothiazine ( 1 ), and the latter reacted with urea to yield 1‐[3‐(10H‐phenothiazin‐10‐yl)propyl]urea ( 2 ). Further reaction of 2 with several substituted aromatic aldehydes led to N‐(arylmethylidene)‐N′‐[3‐(phenothiazin‐10‐yl)propyl]ureas 3a – 3m , which, on treatment with ClCH₂COCl in the presence of Et₃N, furnished the desired racemic trans‐2‐oxoazetidin‐1‐carboxamide derivatives 4a – 4m . The structures of all new compounds were confirmed by IR, and ¹H‐ and ¹³C‐NMR spectroscopy, FAB mass spectrometry, and chemical methods.     

N8‐(2′‐O‐Methyl­ribofuranos­yl)‐8‐aza‐7‐deaza­adenine monohydrate

In the title compound, 4‐amino‐2‐(2‐O‐methyl‐β‐d ‐ribofuranos­yl)‐2H‐pyrazolo[3,4‐d]pyrimidine monohydrate, C₁₁H₁₅N₅O₄·H₂O, the conformation of the N‐glycosylic bond is syn [χ = 20.1 (2)°]. The ribofuran­ose moiety shows a C3′‐endo (³T₂) sugar puckering (N‐type sugar), and the conformation at the exocyclic C4′—C5′ bond is −ap (trans). The nucleobases are stacked head‐to‐head. The three‐dimensional packing of the crystal structure is stabilized by hydrogen bonds between the 2′‐O‐methyl­ribonucleosides and the solvent mol­ecules.     

Construction and photocatalytic properties of two metal‐mediated coordination polymers based on benzene‐1,3,5‐tricarboxylic acid and trans‐1‐(pyridin‐3‐yl)‐2‐(pyridin‐4‐yl)ethene

With the rapid development of modern industry, water pollution has become an intractable environmental issue facing humans worldwide. In particular, the organic dyes discharged into natural water from dyestuffs, dyeing and the textile industry are the main sources of pollution in wastewater. To eliminate these types of pollutants, degradation of organic contaminants through a photocatalytic technique is an effective methodology. To exploit more crystalline photocatalysts for the degradation of organic dyes, two coordination polymers, namely catena‐poly[[(3,5‐dicarboxybenzene‐1‐carboxylato‐κO ¹)silver(I)]‐μ‐trans‐1‐(pyridin‐3‐yl)‐2‐(pyridin‐4‐yl)ethene‐κ²N :N ′], [Ag(C₉H₅O₆)(C₁₂H₁₀N₂)]_n or [Ag(H₂BTC)(3,4′‐bpe)]_n , (I), and poly[[(μ₃‐5‐carboxybenzene‐1,3‐dicarboxylato‐κ⁴O ¹,O ^1′:O ³:O ³)[μ‐trans‐1‐(pyridin‐3‐yl)‐2‐(pyridin‐4‐yl)ethene‐κ²N :N′ ]cadmium(II)] monohydrate], {[Cd(C₉H₄O₆)(C₁₂H₁₀N₂)]·H₂O}_n or {[Cd(HBTC)(3,4′‐bpe)]·H₂O}_n , (II), have been prepared by the hydrothermal reactions of benzene‐1,3,5‐tricarboxylic acid (H₃BTC) and trans‐1‐(pyridin‐3‐yl)‐2‐(pyridin‐4‐yl)ethene (3,4′‐bpe) in the presence of AgNO₃ or Cd(NO₃)₂·4H₂O, respectively. These two title compounds have been structurally characterized by IR spectroscopy, elemental analysis, single‐crystal X‐ray diffraction and powder X‐ray diffraction. In (I), the Ag^I ions and organic ligands form a one‐dimensional coordination chain, and adjacent coordination chains are connected by Ag…O interactions to give rise to a two‐dimensional supramolecular network. Each two‐dimensional network is entangled with other equivalent networks to generate an infrequent interlocked 2D→3D (2D and 3D are two‐ and three‐dimensional, respectively) supramolecular framework. In (II), the Cd^II ions are bridged by the HBTC²⁻ and 3,4′‐bpe ligands, which lie across centres of inversion, to give a two‐dimensional coordination network. The thermal stabilities and photocatalytic properties of the title compounds have also been studied.     

Regioselective grignard metathesis reaction of 2,5‐dibromo‐3‐(6′‐hexylpyridine‐2′‐yl)thiophene and kumada coupling polymerization

2,5‐Dibromo‐3‐(6′‐hexylpyridine‐2′‐yl)thiophene ( DBPyTh ) was synthesized by the Suzuki coupling reaction between two aromatic compounds followed by the bromination. The Grignard metathesis reaction of DBPyTh with isopropylmagnesium chloride proceeded in 85% conversion and the regioselective halogen–metal exchange at the 2‐position was confirmed. Namely, 5‐bromo‐2‐chloromagnesio‐3‐(6′‐hexylpyridine‐2′‐yl)thiophene and 2‐bromo‐5‐chloromagnesio‐3‐(6′‐hexylpyridine‐2′‐yl)thiophene were generated in 90:10 molar ratio. Subsequently, the Kumada coupling polymerization was carried out using 1,3‐bis(diphenylphosphinopropane)nickel(II) dichloride to obtain poly(3‐(6′‐hexylpyridine‐2′‐yl)thiophene) ( PolyPyTh ). The polymer molecular weight could be roughly controlled by the catalyst concentration and the molecular weight distribution ranged from 1.25 to 1.80. The gas chromatograph analysis indicated that 5‐bromo‐2‐chloromagnesio‐3‐(6′‐hexylpyridine‐2′‐yl)thiophene was preferentially polymerized in 90% conversion and the percentage of the head‐to‐tail content (regioregularity) was calculated to be 96%. The matrix‐assisted laser desorption/ionization time‐of‐fright mass spectrum indicated that both polymer chain ends were substituted with the hydrogen atom. The absorption maxima of polymer in CHCl₃ and thin film were observed at 447 and 457 nm, respectively, which were blue‐shifted compared with poly(3‐(4′‐octylphenyl)thiophene). From the CV measurement of the polymer thin film, highest occupied molecular orbital (HOMO) (?5.31 eV) and lowest unoccupied molecular orbital (LUMO) (?3.76 eV) energy levels were calculated from the oxidation and reduction onset potentials, respectively, and the electrochemical band gap energy was determined to be 1.62 eV. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

2‐Amino‐7‐chloro‐2′‐deoxy­tubercidin

In 4‐chloro‐7‐(2‐de­oxy‐β‐d ‐erythro‐pento­furanos­yl)‐7H‐pyr­rolo­[2,3‐d]­pyrimidine‐2,4‐diamine, C₁₁H₁₄ClN₅O₃, the conformation of the N‐glycosylic bond is between anti and high‐anti [χ = −102.5 (6)°]. The 2′‐deoxy­ribofuranosyl unit adopts the C3′‐endo‐C4′‐exo (³T₄) sugar pucker (N‐type) with P = 19.6° and τ_m = 32.9° [terminology: Saenger (1989). Landolt‐Börnstein New Series, Vol. 1, Nucleic Acids, Subvol. a, edited by O. Madelung, pp. 1–21. Berlin: Springer‐Verlag]. The orientation of the exocyclic C4′—C5′ bond is +ap (trans) with a torsion angle γ = 171.5 (4)°. The compound forms a three‐dimensional network that is stabilized by four inter­molecular hydrogen bonds (N—H⋯O and O—H⋯N) and one intra­molecular hydrogen bond (N—H⋯Cl).     

8‐Aza‐7‐deaza‐2′‐de­oxy‐2‐(methyl­sulfan­yl)adenosine

In the title compound, 4‐amino‐1‐(2‐de­oxy‐β‐d ‐erythro‐pentofuranos­yl)‐6‐methyl­sulfanyl‐1H‐pyrazolo[3,4‐d]pyrimidine, C₁₁H₁₆N₅O₃S, the conformation of the glycosidic bond is between anti and high anti. The 2′‐deoxy­ribofuranosyl moiety adopts the C3′‐exo–C4′‐endo conformation (₃T⁴, S‐type sugar pucker), and the conformation at the exocyclic C—C bond is +sc (+gauche). The exocyclic 6‐amine group and the 2‐methyl­sulfanyl group lie on different sides of the heterocyclic ring system. The mol­ecules form a three‐dimensional hydrogen‐bonded network that is stabilized by O—H⋯N, N—H⋯O and C—H⋯O hydrogen bonds.     

Green Synthesis of 1‐(1,2,4‐Triazol‐4‐yl)spiro[azetidine‐2,3′‐(3H)indole]‐2′,4′(1′H)‐diones as Potential Insecticidal Agents

One pot green synthesis of 1‐(1,2,4‐triazol‐4‐yl)spiro[azetidine‐2,3′‐(3H)‐indole]‐2′,4′(1′H)‐diones was carried out by the reaction of indole‐2,3‐diones,4‐amino‐4H‐1,2,4‐triazole and acetyl chloride/chloroacetyl chloride in ionic liquid [bmim]PF₆ with/without using a catalyst. It was also prepared by conventional method via Schiff's bases, 3‐[4H‐1,2,4‐triazol‐4‐yl]imino‐indol‐2‐one. Further, the corresponding phenoxy derivatives were obtained by the reaction of chloro group attached to azetidine ring with phenols. The synthesized compounds were characterized by analytical and spectral (IR, ¹H NMR, ¹³C NMR, and FAB mass) data. Evaluation for insecticidal activity against Periplaneta americana exhibited promising results.     

Chlorido(dimethyl 2,2′‐bipyridine‐4,4′‐dicarboxylate‐κ2N,N′)(η5‐pentamethylcyclopentadienyl)rhodium(III) chloride 1‐hydroxypyrrolidine‐2,5‐dione disolvate

The title complex, [Rh(C₁₀H₁₅)Cl(C₁₄H₁₂N₂O₄)]Cl·2C₄H₅NO₃, has been synthesized by a substitution reaction of the precursor [bis(2,5‐dioxopyrrolidin‐1‐yl) 2,2′‐bipyridine‐4,4′‐dicarboxylate]chlorido(pentamethylcyclopentadienyl)rhodium(III) chloride with NaOCH₃. The Rh^III cation is located in an RhC₅N₂Cl eight‐coordinated environment. In the crystal, 1‐hydroxypyrrolidine‐2,5‐dione (NHS) solvent molecules form strong hydrogen bonds with the Cl⁻ counter‐anions in the lattice and weak hydrogen bonds with the pentamethylcyclopentadienyl (Cp*) ligands. Hydrogen bonding between the Cp* ligands, the NHS solvent molecules and the Cl⁻ counter‐anions form links in a V‐shaped chain of Rh^III complex cations along the c axis. Weak hydrogen bonds between the dimethyl 2,2′‐bipyridine‐4,4′‐dicarboxylate ligands and the Cl⁻ counter‐anions connect the components into a supramolecular three‐dimensional network. The synthetic route to the dimethyl 2,2′‐bipyridine‐4,4′‐dicarboxylate‐containing rhodium complex from the [bis(2,5‐dioxopyrrolidin‐1‐yl) 2,2′‐bipyridine‐4,4′‐dicarboxylate]rhodium(III) precursor may be applied to link Rh catalysts to the surface of electrodes.