The Preorganization Effect of the Calix[4]arene Platform on the Extraction Properties of Acetylhydrazide Groups with Transition Metal Ions

The binding properties of the cone conformer of O,O,O,O-tetrakis[hydrazinocarbonylmethyl]-4-tert-butylcalix[4]arene, the cone and the 1,3-alternate conformers of the corresponding thia analogue have been evaluated by means of liquid–liquid extraction for a large variety of metal ions. The extraction constants and the stoichiometries of the complexes formed have been determined. Comparison of the extraction properties of calix[4]arenes with their acyclic monomeric analogue clearly demonstrated, that the preorganization of acetylhydrazide groups on the calix[4]arene platform is the cause for a significant improvement of its binding properties. The presence of additional “soft” nitrogen binding sites in acetylhydrazide derivatives of calix[4]arenes compared to their amide derivatives leads to a shift from their classical selectivity for alkali and alkaline earth cations to transition metals. The cone conformer of tetrathiacalix[4]arene shows higher selectivity in a series of d-metal ions compared with its “classical” analogue. The 1,3-alternate conformer exhibits an excellent extraction selectivity for Cu²⁺ and Hg²⁺.     

Synthesis of a phloroacetophenon[4]arene consisting of four isomers via the one-pot,acid-catalysed condensation of phloroacetophenone with benzaldehyde

A phloroacetophenon[4]arene (3) consisting of four isomers was synthesised for the first time via the condensation of phloroacetophenone and benzaldehyde in a one-pot reaction with refluxing toluene in the presence of catalytic amounts of TsOH·H₂O for a maximum yield of 64%. The conformational elucidation of four isomers (3a–d) by ¹H NMR spectroscopy and X-ray crystal structure analysis showed them to be cone, partial cone, 1,3-alternate and 1,2-alternate types of conformations, respectively.     

Cesium ion-selective electrodes based on 1,3-alternate thiacalix[4]biscrown-6,6

Four thiacalix[4]biscrown ethers with 1,3-alternate conformation were examined for the potentiometric responses in poly(vinyl chloride) membrane electrodes. Their potentiometric selectivities toward potassium and cesium ions over other alkali, alkaline earth, and transition metal ions were measured by the fixed interference method (FIM). Among the ionophores, 1,3-alternate thiacalix[4]biscrown-6,6 showed a high selectivity for cesium over potassium ion and so was optimized as a Cs⁺-selective electrode. The electrode exhibited a linear response with a near Nernstian slope of 57.6 mV per decade in the concentration range of 1.0×10⁻⁶ to 3.2×10⁻² M. It was suitable for use in aqueous solution in a wide range of pH 2.5-12.5 and had a fast response time of ca. 5 s. On the basis of 1,3-alternate thiacalix[4]biscrown-6,6, the electrode has a wide linear range and selectivity for cesium ion over potassium ion better than those previously reported with other ionophores.     

Synthesis and Cesium Binding Affinity of New 25,27-Bis(alkyloxy)calix[4]arene-crown-6 Conformers in Relation to the Alkyl Pendent Moiety

The preparation of new 25,27-bis(alkyloxy)calix[4]arenes-crown-6 in the cone, partial-cone and 1,3-alternate conformation is reported. We have also investigated the alkylation of the cone monoalkylated calix[4]arene-crown-6 achieved using Cs 2 CO 3 . This reaction afforded a mixture of cone and partial-cone calix[4]arenes-crown-6 having an alkyl chain anti or syn to the polyether ring. Conformations have been probed using 1 H, 13 C, 2D-NMR and NOESY analysis, and using X-ray crystallography. Extraction experiments using a two-phase solvent method involving cesium picrate were performed for these newly synthesized conformers. They reveal and confirm the strong preference for the 1,3-alternate conformers. The affinity of 1,3-alternate calixarenes for Cs + has been assessed by complexation measurements (log g ) using a spectrophotometric technique. No significant Cs + extraction difference was observed in relation to the nature of the alkyl chains on the aromatic rings. 1 H NMR studies of the 1,3-alternate calixarene Cs + complexes confirms the cation's spacial position between the two aromatic rings, due to cation- ~ interactions.     

Aminolysis of p-tert-butyltetrathiacalix[4]arene tetraethylacetates in cone, partial cone and 1,3-alternate conformation: synthesis of amide based receptors for oxyanions

Cone, partial cone and 1,3-alternate conformers of tetrathiacalix[4]arene tetraethylacetate were synthesized and subjected to aminolysis with alkyl amines [CH₃(CH₂)_nNH₂; n=2, 3, 5] to yield mono-, di-, tri- or tetrasubstituted p-tert-butyltetrathiacalix[4]arene amides which were characterized by detailed analysis of their NMR spectral and single crystal X-ray crystallography. It has been observed that while the 1,3-alternate and cone conformers of the tetrathiacalix[4]arene tetraethylacetate gave corresponding tetrathiacalix[4]arene tetraamides under different experimental conditions, the corresponding partial cone conformer undergoes a cascade of regioselective reactions with the same amines. Variable temperature ¹H NMR experiments allowed the determination of relative stability of different conformers within the temperature range of 298-333 K. The synthesized derivatives were evaluated as molecular extractants for cations and anions and were determined to facilitate extraction of oxyanions (CrO₄²⁻ and Cr₂O₇²⁻) from aqueous to the organic phase. The studies have a significance in the design of tetrathiacalix[n]arene based molecular receptors for innovative applications.     

Synthesis and Conformational Studies of Lower Rim Cyanomethyl Substituted Calix[4]arenes

The conformational inversion characteristics of calix[4]arenes carrying cyanomethyl groups on the lower rim have been investigated. Complete conversion from a 1,3-alternate to a partial cone conformation was observed for the 1,3-dicyanomethyl ether of calix[4]arene at room temperature, while at higher temperatures further inversion to a 1:1 mixture of partial cone and cone conformers occurred.     

Binding studies of tetrathiafulvalene-calix[4]pyrroles with electron-deficient guests

The neutral meso-octamethylporphyrinogen derivative, tetraTTF-calix[4]pyrrole 1 (TTF=tetrathiafulvalene), acts as a multi-faceted receptor in that it interacts with an assortment of different guests in different ways. The conformation of receptor 1 can be reversibly switched between the 1,3-alternate conformation (i.e., 1, Fig. 1) and the cone conformation (i.e., 1·Cl⁻, Fig. 2) by the repetitive addition of chloride and sodium ions. In this paper, the results of detailed and systematic complexation studies involving both 1 and its chloride-bound complex, 1·Cl⁻, with a variety of guests are described. Receptor 1 binds quasi-planar nitroaromatic guests in its 1,3-alternate conformation, while release of these guests takes place upon addition of chloride anions. On the other hand, spherical fullerene guests are strongly bound by 1·Cl⁻. Finally, it was found that a bidentate guest, consisting of a quasi-planar 2,5,7-trinitro-9-dicyanomethylenefluorene moiety tethered to a spherical C₆₀ fullerene, could be recognized by receptor 1 in either its 1,3-alternate or its chloride-bound cone conformation, albeit through very different binding modes.     

Computational study of conformations and of sulfinyl oxygen-induced pentacoordination at silicon in 4-chloro-4-silathiacyclohexane 1-oxide and 4,4-dichloro-4-silathiacyclohexane 1-oxide

Second-order Møller-Plesset theory (MP2) and density functional theory (B3LYP) with the 6-311G(d,p) and 6-311+G(d,p) basis sets have been used to calculate the equilibrium geometries and relative energies of the chair, twist, and boat conformations of 4-chloro-4-silathiacyclohexane 1-oxide and 4,4-dichloro-4-silathiacyclohexane 1-oxide. The chair conformers of the axial sulfoxides are lower in energy than the chair conformers of the corresponding equatorial sulfoxides. MP2/6-311+G(d,p) predicted the chair conformer of axial trans-4-chloro-4-silathiacyclohexane 1-oxide (4a) to be 6.12, 0.44, and 0.45 kcal/mol, respectively, more stable than the corresponding 1,4-twist (4b), 2,5-twist (4c) and 1,4-boat (4d) conformers and 6.93 kcal/mol more stable than the 2,5-boat transition state ([4e]^‡). Structures 4c and 4d are stabilized by intramolecular coordination of the sulfinyl oxygen with silicon that results in trigonal bipyramidal geometry at silicon. The 1,4-boat conformer (7d) of axial 4,4-dichloro-4-silathiacyclohexane 1-oxide is also stabilized by transannular coordination of the sulfinyl oxygen with silicon. The energy difference (E_rel = 4.23 kcal/mol) between the chair conformer (7a) and 7d is larger than that between 4a and 4d. The relatively lower stability of the 1,4-boat conformer (7d) of axial 4,4-dichloro-4-silathiacyclohexane 1-oxide (7a) may be due to repulsive interactions of the axial halogen and sulfinyl oxygen atoms. The relative energies and structures of the conformers and transition states of cis- and trans-4-chloro-4-silathiacyclohexane 1-oxide and 4,4-dichloro-4-silathiacyclohexane 1-oxide are discussed in terms of hyperconjugative interactions, orbital interactions, nonbonded interactions, and intramolecular sulfinyl oxygen-silicon coordination.     

Calix[4]arene bisphosphite ligands bearing two distal 2,2′-biphenyldioxy or 2,2′-binaphthyldioxy moieties: conformational flexibility and allyl-palladium complexes

Achiral and chiral calix[4]arene bisphosphite ligands (2 and 3) bearing two distal 2,2′-biphenyldioxyphosphinoxy and 2,2′-binaphthyldioxyphosphinoxy moieties, respectively, have been synthesized. Each of these ligands exists in two pairs of interconverting conformations in solution. The partial cone conformer (A) of the (bis)biphenyldioxyphosphinoxy ligand 2 has been separated by fractional crystallization and its structure established by X-ray crystallography. The mechanism of interconversion of the pairs of conformers (A/B and C/D) has been probed by two-dimensional NMR spectroscopy. The ¹H and ³¹P NMR evidence strongly supports a similar kind of exchange mechanism for ligand 3. Freezing of the cone conformer from the interconverting C/D pair of conformers of ligand 2 has been achieved by complexation with (allyl)palladium moieties. The methyl-allyl complex (2d) is moderately effective for catalytic regioselective allylic alkylation of crotyl acetate.     

Di-ionizable calix[4]arene-1,3-crown-4 ligands in 1,3-alternate,cone, and partial-cone conformations: synthesis and metal ion extractions

Di-ionizable calix[4]arene-1,3-crown-4 compounds locked in 1,3-alternate, cone, and partial-cone conformations are synthesized for evaluation in metal ion separations. The ionizable functions include carboxylic acid and N-(X)sulfonyl carboxamide groups in which the acidity is tuned by variation of the electron-withdrawing ability of X. Similar synthetic routes were employed for preparation of the cone and 1,3-alternate ligand series. A different preparative route utilizing protection and deprotection was required to obtain the partial-cone analogues. Ligand conformations were confirmed by their proton and/or carbon NMR spectra. X-ray diffraction verified an unusual 1,2-alternate conformation in the solid-state for one synthetic intermediate. Effects of ligand conformation and ionizable group variations on competitive solvent extractions of alkali and alkaline earth metal cations from aqueous solutions into chloroform were assessed. Single species solvent extractions of Hg²⁺ and Pb²⁺ were also performed.     

Modelling conformations and IR spectra of p-tert-butylthiacalix[4]arene tetraester using DFT method

The infrared spectra of the cone, partial cone and 1,3-alternate conformers of p-tert-butyltetrakis(ethoxycarbonyl)methoxytetrathiacalix[4]arene (TEMT) have been recorded. The structural optimization and normal mode analysis were performed for this molecule on the basis of the density functional theory. These calculations gave the frequencies of vibrations and infrared intensities for the cone, partial cone (paco) and 1,3-alternate (1,3-alt) conformers. The energy difference between the paco and 1,3-alt conformers is 3.1 kcal/mol. The cone conformer is likely to be less stable compared to the paco and 1,3-alt conformers. The calculated in gas phase dipole moments 5.65, 3.33, and 0.02 D for the cone, paco and 1,3-alt conformers of the TEMT are in good accordance with theoretical values for the thiacalix[4]arene. Complete assignments were made for the experimental IR spectra of all conformers. The softness of sulphur atoms to nucleophilic and electrophilic attack is higher than softness of oxygen atoms of ester groups in the lower rim. The bands characteristic for each conformation were defined. IR spectroscopy combined with DFT computation provides unique detailed information about the structure of the technologically relevant materials, which could not be obtained before with any other technique.     

Synthesis, 1H-NMR conformational analysis and complexation studies of two di-imidazolyl acetamido p-tert-butylcalix[4]arenes

The synthesis of a new di-imidazolyl-di-methoxy acetamido p-tert-butylcalix[4]arene 4 is reported. 4 has been prepared by reacting the corresponding di-methyl ester di-methoxy derivative with histamine in 1:1 mixture of methanol: toluene. The binding properties of 4 towards alkali, alkaline earth, transition (Zn²⁺, Co²⁺) and heavy (Pb²⁺, Cd²⁺) metals have been investigated along with the complexes stoichiometries. The ¹H-NMR spectra of complexes show the location of cations in receptor 4. Partial cone conformation is observed only with strontium and calcium whereas the cone conformation is detected with most of the cations. Comparison of the complexation results with those obtained for di-imidazolyl acetamido p-tert-butylcalix[4]arene 3 missing the methyl groups is also reported.     

Design, synthesis, characterization, and preliminary complexation studies of chromogenic vanadophiles: 1,3-alternate thiacalix[4]arene tetrahydroxamic acids

New chromogenic supramolecular vanadophiles were designed and synthesized by incorporating hydroxamic acid chains on a 1,3-alternate thiacalix[4]arene scaffold and were found to show high affinity toward vanadate ions. The article describes a comprehensive design process to devise a tailor-made co-ordination cavity for vanadate ions by pre-organization of hydroxamic acid chelating moieties on a 1,3-alternate thiacalix[4]arene scaffold. These receptors simultaneously co-ordinate two vanadate ions giving a highly ‘staggered’ geometry with almost D_2d symmetry. Proposed structures and complexation behavior of the receptors were explained by critical examination of FTIR, UV-visible, mass, and ¹H NMR data.     

The extraction of thallium(I) and silver(I) ions with 1,3-alternate calix[4]arene derivatives

Tetraallyloxy and tetrabenzyloxy derivatives of calix[4]arenes in cone and 1,3-alternate conformations were synthesised and their capacity to extract thallium(I) and silver(I) ions was investigated. ??Low??-temperature single crystal X-ray structure determinations were recorded for two derivatives in which the calixarene conformation was that of an alternating cone, the aromatic rings lying closely quasi-parallel to the $ \overline{4} $ -axis of the cone. The structure of a tetraallyloxy derivative in the cone conformation was also determined in which a molecule of acetonitrile was included within the calixarene cavity.     

Effect of conformation on metal ion extraction by calix[4]arene dicarboxylic acids

Synthetic routes to four calix[4]arene stereoisomers with two distal methoxycarboxy groups and two distal butoxy groups are reported. Conformations of cone, partial cone (butyl up), partial cone (acid up), and 1,3-alternate were established by ¹H and ¹³C-NMR spectroscopy. To probe the influence of ligand conformation on metal ion complexation, extractions from aqueous solutions into 1,2-dichloroethane were performed. These included competitive alkali metal cation extractions, competitive alkaline earth metal cation extractions, and single species extractions of Pb²⁺ and of Hg²⁺. Comparisons are also made with the results for a conformationally mobile analogue in which the two butoxy groups are replaced with methoxy groups.     

A facile one-pot access to cone and 1,3-alternate conformers of calix[4]arene-bis(amido)crowns

A facile one-pot access to cone and 1,3-alternate calix[4]arene-bis(amido)crowns by the use of sodium hydride or cesium carbonate as template/base has been reported. The structures of products have been established through detailed chemical, physical, and spectroscopic data and single crystal X-ray analysis of calix[4]arene-bis-(ethyleneamido)crown, 7a. The preliminary evaluation of the obtained molecular receptors promise opportunities to design molecular capsules/carriers for toxic metal ions (i.e., Hg⁺⁺) and anionic species (CrO₄⁻⁻).     

Calix[4]arene-dithiacrown ethers: synthesis and potentiometric membrane sensing of Hg

A series of calix[4]arene-dithiacrown-5 and -dithiacrown-6 compounds in cone and 1,3-alternate conformations has been synthesized. Responses of these ionophores to Hg²⁺ and competing metal ions were determined in solvent polymeric membrane electrodes. High potentiometric selectivity for Hg²⁺ over Na⁺ and a variety of transition and heavy metal ions was obtained.     

Polymerization of Styrene Initiated by 1,4-Dimethyl-1,4-bis(p-anisyl)-2-tetrazene

Abstract

The polymerization of styrene (St) initiated by 1,4-dimethyl-1,4-bis(p-anisyl)-2-tetrazene (1a) was studied kinetically in benzene. The polymerization proceeds through a radical mechanism. The rate of polymerization is proportional to [1a]^0.5 and [St]^1.0. The overall activation energy for the polymerization is found to be 81.2 kJ/mol within the temperature range of 65 to 80°C. The activation parameters for the decomposition of 1a at 70°C are k_d = 1.88 × 10^?5s^?1, δH? = 133.1 kJ/mol, and δS? = 29.9 J/mol·deg.     

The influence of heteroatoms on the conformational properties of heteracalix[4]arenes. Comparison of oxygen-, sulfur-, and nitrogen-bridged [14]metacyclophanes

Oxygen- and sulfur-bridged calix[4]arenes have been synthesized by the nucleophilic aromatic substitution of 1,5-difluoro-2,4-dinitrobenzene with 4,6-diisopropylresorcinol or 4,6-diisopropyl-1,3-benzenedithiol. X-ray crystal structure analyses revealed that the oxacalix[4]arene 2 adopts an unsymmetrical 1,3-alternate conformation and that the dinitrobenzene rings strongly conjugate with the bridging oxygen atoms. On the other hand, the thiacalix[4]arene 3 adopts a heavily twisted unsymmetrical 1,3-alternate conformation, and the conjugation is very weak. In the ¹H NMR spectrum (CDCl₃, 30 °C), both compounds display a pair of diastereotopic methyl signals for the isopropyl groups in agreement with the frozen 1,3-alternate conformation on the NMR time scale. The free energies of activation of the macrocyclic inversion for 2 and 3 were determined to be 69.5 kJ mol⁻¹ and 74.9 kJ mol⁻¹, respectively, by variable temperature NMR spectroscopy.     

Synthesis and properties ofN-substituted azacalix[n]arenes

Side arm modifications of hexahomotriazacalix[3]arene (1) were achieved by simple synthetic methods. Compound5 has picolyl side arms and liquid-liquid extraction experiments showed that the alkali cation affinity of5 is much stronger than that of1. A chiral group was also introduced into the azacalixarene structure. Calix[4]arene was converted into dihomoazacalix[4]arene (2) in 8% yield. Clathrate formation of2 with various solvents is described. MM3 calculations were carried out onp-substituted analogs of2. The self-filled structure, in which the benzyl side arm is placed in its cavity, is the most stable structure when thep-positions of the aromatic rings carry small substituents. Strong hydrogen bonds between nitrogen and phenolic hydroxyl groups in dihomoazacalix[4]arene (2) were observed at low temperatures. The¹H-NMR signals of phenolic hydroxyl groups appeared as six singlets in the range of 9.817.1 ppm at –70°C.This paper is dedicated to the commemorative issue on the 50th anniversary of calixarenes.