［M4En］(n=1,2)型簇合物中四重桥帽原子E对M-M作用的影响

由四核平面双帽［M₄E₂］型及单帽［M₄E］型簇合物构型应满足的几何条件，得到判断有无M-M键存在的关系式D=(［0.92(R_M+R_E)］²-2R²_M)^1/2，并给出形成［M₄E₂］及［M₄     

CO2鼓泡法可控制备单层中空CaCO3微球:染料负载及细胞生物成像

在L-蛋氨酸（L-Met）的导向下,可控制备了一种单层中空CaCO₃微球。考察了L-Met的加入量、CO₂流速和反应温度等重要参数对CaCO₃形貌、尺度和晶相的影响。作为一种客体分子载体,该单层中空CaCO₃微球可负载罗丹明B（RhB）,得到一种发光复合材料（RhB@hollow-CaCO₃）。RhB@hollow-CaCO₃）对A-549肺癌细胞（A549 LCCs）和HO8910人卵巢癌细胞（HO8910 OCCs）表现出良好的生物相容性。     

四个基于间苯二(取代水杨醛酰腙)的有机锡配合物的溶剂热合成、结构和荧光性能

采用间苯二（取代水杨醛酰腙）（H₄L）与R₃²SnOH溶剂热反应,或间苯二甲酰肼、3-叔丁基水杨醛和三环己基氢氧化锡一锅溶剂热法反应,合成了4个新的有机锡配合物（SnR²）₂L（1~4）,其中,H₄L=m-Ph（CONH—N=CH（o-OH） PhR¹）₂;R¹=NEt₂,R²=Ph（1）;R¹=3,5-di-tert-butyl=3,5-t-2Bu,R²=Ph（2）;R¹=3,5-t-2Bu,R²=Cy（3）;R¹=3-tert-butyl=3-t-Bu,R²=Cy（4）。经元素分析、红外光谱和（¹H、¹³C、¹¹9Sn）核磁共振谱表征,并用X射线衍射方法确证配合物1~4的结构。配体H₄L的2个取代水杨醛酰腙链向内取向并与锡原子配位形成3个内向E型配合物1~3,取代水杨醛酰腙链向外取向并与锡原子配位形成外向E型配合物4。配合物1、2和4属于三斜晶系P1空间群,配合物3属于单斜晶系P2₁/c空间群。中心锡与配位原子构成畸形双角三锥构型。配体、配合物-三氯甲烷溶液的荧光性能表明,当具有弱荧光的配体m-Ph（CONH—N=CH（o-OH） PhNEt₂）₂（H₄L¹）和无荧光的配体m-Ph（CONH—N=CH（o-OH） Ph（3,5-t-2Bu））₂（H₄L²）分别与苯基锡、环己基锡配位后,配合物-三氯甲烷溶液发出强荧光。     

微乳液法低温制备纳米金红石型二氧化钛的研究

以TiCl₄为原料、在十六烷基三甲基溴化铵/正己醇/水组成的微乳液体系中、在较低温度下,制备了球形、花状、捆绑丝和星形的金红石型二氧化钛纳米颗粒。研究了w值(水与CTAB物质的量之比)、反应物浓度、反应温度以及P值(正己醇与CTAB的物质的量之比)等因素对产品形貌的影响,并用TEM、XRD对产品进行了表征。     

Bi4-xEuxTi3-yMyO12（M=Fe，Co，Ni）纳米颗粒的制备及光学和磁学性能

三层结构的Aurivillius相的Bi_4-xEu_xTi_3-yM_yO₁₂（x=0~0.6;M=Fe/Co/Ni,y=0.01,0.02,0.04,0.06,0.08,0.10）纳米颗粒,是通过共沉淀法和后续的高温煅烧处理所制备的。利用XRD,SEM,PL,Raman,PPMS等方法对样品进行表征,研究了不同掺杂浓度下的产物的物相、形貌和性能等。实验结果表明,通过掺杂,发现纳米颗粒的粒径变小,形貌更均一,分散性也更好。通过对掺杂离子浓度的优化,发现Eu³⁺离子的掺杂浓度为x=0.4时,发光强度是最强的。此外,对Ti位进行了磁性离子（Fe³⁺,Co³⁺和Ni²⁺）的掺杂,实验结果发现随着掺杂的磁性离子浓度的减少,发光强度是逐渐增强,而且产物具有很好的铁磁性。     

阴离子主导的手性Cu(II)配位聚合物:可逆的结构转换,圆二色谱和二次谐波响应

用手性的V形双齿配体N，N''-（（1R，2R）-1，2-二取代环己二胺）双（N-苯甲酸（3-吡啶亚甲基）酰胺（1R，2R）-3-bcpb）和不同的Cu(II)盐反应，组装成2个新的手性Cu(II)配位聚合物{[Cu（（1R，2R）-3-bcpb）]Cl₂}_n（1）和{[Cu（（1R，2R）-3-bcpb）₂]（ClO₄）₂·2H₂O·2CH₃OH}_n（2）。其中1是一维链状结构，2具有二维（4，4）网络拓扑。溶剂热条件下，在甲醇溶剂体系中，通过引入AgClO₄，1能转换成2，同时通过加入NaCl，2也能转换成1。圆二色谱和二次谐波响应测试验证了它们具有结构上的手性。     

手性铁、镍席夫碱配合物的合成、结构及其与DNA相互作用研究

以手性苯乙胺与吡啶醛缩合得到的含双齿或三齿配位基的手性席夫碱（L1、L2）为配体,合成了4对单核铁、镍手性对映体配合物fac-Λ-[M（R-L1）₃]（ClO₄）₂·3CH₃CN（M=Fe,1R-Fe;M=Ni,1R-Ni）,fac-Δ-[M（S-L₁）₃]（ClO₄）₂·3CH₃CN（M=Fe,1S-Fe;M=Ni,1S-Ni）,[M（R-L₂）₂]（ClO₄）₂（M=Fe,2R-Fe;M=Ni,2R-Ni）,[M（S-L₂）₂]（ClO₄）₂（M=Fe,2S-Fe;M=Ni,2S-Ni）。利用红外光谱（IR）、核磁共振氢谱（1HNMR）、元素分析（EA）、X-射线单晶衍射等手段对配合物结构进行了表征。对化合物1R-Fe,1R-Ni,1S-Ni,2R-Fe进行了晶体结构分析,其中1R-Fe,1R-Ni,1S-Ni结晶于P2₁3手性空间群,金属中心与3个二齿配体（L1）提供的6个氮原子配位形成了扭曲变形的八面体结构;R型配体诱导配合物形成fac-Λ构型,而S型配体诱导配合物形成fac-Δ构型。2R-Fe结晶于P2₁2₁2₁手性空间群,二价铁离子与2个三齿配体（R-L2）提供的6个氮原子配位形成了扭曲变形的八面体结构。利用紫外-可见吸收光谱、荧光猝灭光谱、圆二色谱等光谱分析法研究了配合物与DNA的相互作用。研究结果表明这4对手性配合物均能与小牛胸腺CT-DNA发生不同强度的结合,结合稳定常数从4.41×10³L·mol^-1到1.88×10⁴L·mol^-1。配合物与DNA的结合模式可能是通过静电作用与DNA骨架发生沟面结合。金属中心为铁的配合物表现出比相应的镍配合物更强的DNA作用力;而含三齿配体L2的配合物与DNA的作用均比相应的含二齿配体L1的配合物更强;S型配体形成的配合物与DNA的结合能力优于R型配体形成的配合物。     

nFe3+/nSr2+和nOH-/nNO3-对锶铁氧体纳米片结构及磁性能的影响

采用改进的水热法成功合成了单分散的纯相锶铁氧体纳米片。借助DLS、XRD、FTIR、SEM、EDS和VSM等分析测试手段对SrFe₁₂O₁₉铁氧体粉体的粒度、结构、形貌和磁性能进行表征。研究结果表明,在240℃保温5 h,物质的量之比n_Fe³⁺/n_Sr²⁺(R_F/S)和n_OH^-/n_NO3^-(R_O/N)分别为5和2时,所得产物为单分散的纯相六角SrFe₁₂O₁₉铁氧体纳米片。随着R_F/S和R_O/N的变化,合成样品中有少量SrCO₃和Fe₂O₃杂相存在,这主要与反应条件和离子比例有关。磁性能测试结果显示,所得纯相的六角SrF₁₂O₁₉铁氧体纳米片具有优异的磁性能,其饱和磁化强度和矫顽力分别达到60.91 emu·g^-1和94.83 kA·m^-1,使其在医疗、催化和生物等高技术领域具有潜在的应用。     

3-氨基丙醇调控合成超顺磁四氧化三铁微球

采用乙二醇为溶剂,无水FeCl₃为铁源,聚丙烯酸为稳定剂,通过改变3-氨基丙醇的用量,合成了一系列不同微球直径和晶粒大小的超顺磁Fe₃O₄微球。高分辨率透射电镜和X-射线衍射分析证实所得产物为Fe₃O₄,红外光谱和热重分析表明,微球表面成功包覆聚丙烯酸。微球的大小和组成微球的颗粒粒径分别用透射电镜和X-射线衍射分析,结果表明,所得微球的直径随着3-氨基丙醇的用量增加而减小,组成微球的颗粒粒径随着3-氨基丙醇的用量增加而增大。磁性测试表明所制备微球室温下具有良好的超顺磁性。该制备方法步骤简单,可望用于其他无机氧化物纳米微球或颗粒的制备。     

不同形貌稀土掺杂Gd2O3粉体的制备及光磁性能研究

采用水热法,利用不同添加剂:柠檬酸(CA)、油酸(OA)、乙二胺四乙酸(EDTA)制备出了不同形貌前驱物Gd(OH)₃,并经退火得到不同形貌的Gd₂O₃样品(S-CA、S-OA、S-EDTA).XRD图表明所制得Gd₂O₃粉末均为立方晶系(空间群为Ia3),并且不同添加剂所得粉晶的晶格常数略有不同:1.08225nm(S-CA),1.08114nm(S-OA),1.08320nm(S-EDTA);SEM图可看出其颗粒大小分别约为63nm(S-CA),300nm(S-OA),2μm(S-EDTA);红外光谱则进一步证明3种产物均为Gd₂O₃,并且不同添加剂下样品的基团振动吸收强度不一样;利用荧光光谱仪和综合物性测量系统测量研究了经不同添加剂所制备出的稀土(Yb,Er/Ho)掺杂Gd₂O₃的上转换发光特性及磁学性能,结果表明:样品形貌对稀土掺杂Gd₂O₃上转换发光强度和顺磁磁化率影响较大,其中由EDTA添加剂所制备出的稀土掺杂Gd₂O₃粉末的上转换发光强度和顺磁磁化率最佳.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.