Functionalized polynorbornenes with organosilicon groups in the side chains. Synthesis and photophysical properties

Using the method of metathesis polymerization carbon-chain homopolymers containing triрhenylsilyl, tritolylsilyl and trithienylsilyl groups in the side chains, as well as their copolymers with additional carbazole-containing units have been synthesized. Photophysical properties of the obtained compounds were investigated. All polymer products show an intense photoluminescence in the blue region of the spectrum. The largest quantum yield (61.4%) was shown by the copolymer with triphenylsilyl and carbazole side groups.     

Synthesis of pyridazines functionalized with amino acid side chains

A simple route for the preparation of 3,4,6-substituted pyridazines is described by using Tebbe olefination of esters then Diels–Alder reaction of the resulting enol ethers with tetrazine.     

Synthesis and photo- and electroluminescent properties of copolyfluorenes with nile red fragments in side chains

New copolyfluorenes containing units of 4,7-dibromo-2,1,3-benzothiadiazole (green luminophore) and 3,6- or 2,7-dibromocarbazole derivatives with side-chain fragments of green (4-pyrrolidinyl-1,8-naphthalimide) and red (Nile red) luminophores and additional carbazole or diphenyloxadiazole groups are synthesized via the Suzuki copolycondensation reaction. The structure of the polymers is modified via insertion of triphenylamine, aryloxadiazole, and quinoxaline units in the backbone of copolyfluorenes and via introduction of triphenylamine, fluorene, and benzene terminal groups. The molecular-weight characteristics of the polycondensation products and the specific features of the transfer of polyfluorene emission energy to the indicated luminophores in solutions and films are studied. Coating the emissive copolyfluorene layer with electron-conducting and hole-blocking layers of poly[9,9-bis(6′-diethoxyphosphorylhexyl)fluorene] makes it possible to increase the brightness of light-emitting diodes (to 2380–3900 cd/m²) and their current and luminance efficiencies.     

Functionalized polynorbornenes with fragments of cholic acid and luminophore complexes of iridium(III) and copper(I) in side chains. Synthesis and photophysical properties

Copolymers containing fragments of cholic acid and luminophore complexes of iridium(III) and copper(I) in the side chains have been synthesized by metathesis polymerization. Photophysical properties of the obtained compounds have been investigated. Iridium-containing copolymers demonstrate intense photoluminescence of green, bluish-green and red colors. Copper-containing copolymers generate radiation of green and yellow-green colors. The color of photoluminescence of the metal-containing polymers is determined by the nature of copper(I) and iridium(III) complexes bonded to polymer chain.     

Synthesis and properties of fluorosilicone with perfluorooctylundecyl side chains

A series of fluorosilicone (FLS) homopolymers with 4,4,5,5,6,6,7,7,8,8, 9,9,10,10,11,11,11‐heptadecafluoroundecylmethylsiloxane [? C₈F₁₇CH₂CH₂CH₂(CH₃) SiO? ; HDFUSiO] and copolymers based on dimethylsiloxane [? (CH₃)₂SiO? ] were prepared by the hydrosilylation of 4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,11‐heptadecafluoro‐1‐undecene (C₈F₁₇CH₂CH?CH₂) with poly(hydromethylsiloxane)s. Thermal characterization showed that the decomposition of fluoroalkyl side chains occurred at about 245 °C. Side‐chain crystallization was observed for FLSs with more than 30 mol % HDFUSiO. The refractive index decreased with increasing HDFUSiO content. The dielectric constant increased with increasing HDFUSiO content. The liquid surface tension of the FLS containing 10 mol % HDFUSiO was as low as that of the highly fluorinated FLSs. FLSs with HDFUSiO and trichlorosilylethyl side chains (Cl₃SiCH₂CH₂? ) were also prepared so that their solid surface tension (surface free energy) could be measured. The surface free energy of these FLSs decreased with increasing Cl₃SiCH₂CH₂? content, but the sliding angle of a water droplet and the contact‐angle hysteresis adversely increased. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2704–2714, 2003     

Structure and properties of functionalized polyfluorenone containing hetero aromatic side chains

The optical properties of substituted fluorenones with diverse structures have been analyzed using molecular orbital calculations in order to understand the structure-property relations. Based on theoretical predictions, synthesis of some model compounds has been attempted. The experimentally obtained optical properties are in close agreement with the theoretically obtained results.     

Synthesis and properties of transparent luminescent nanocomposites with surface functionalized semiconductor nanocrystals

5-Amino-1,10-phenanthroline (Aphen) was used as an organic ligand to functionalize CdS nanocrystals (NCs) by a ligand-exchange process. The functional Aphen-CdS NCs have strong luminescent emission at 552 nm and good dispersibility in the polar organic monomers. The Aphen-CdS NCs were dispersed in polymeric monomers to prepare a series of transparent luminescent nanocomposites with excellent thermal stability via in-situ bulk polymerization. The fluorescent properties of the Aphen-CdS NCs were well retained in the polymer matrix. It was found that when the methacrylic acid (MAA) and glycidyl methacrylate (GMA) as the comonomers were introduced into the polymer matrix, the emission peaks of the resultant nanocomposites had a blue shift and the fluorescent intensities also increased due to the interaction between NCs and the polymer matrices. The transparent NCs/polymer nanocomposites with tunable fluorescent emission can be potentially used for the fabrication of optoelectronic devices.     

Simulations of gas transport in membranes based on polynorbornenes functionalized with substituted imide side groups

This paper studies the diffusive and sorption steps of several gases across membranes cast from poly(N-phenyl-exo,endo-norbornene-5,6-dicarboximide) chloroform solutions. Chains packing effects on gas transport was investigated by conducting a parallel study on the permeation characteristics of membranes cast from hydrogenated poly(N-phenyl-exo,endo-norbornene-5,6-dicarboximide) chloroform solutions. The permeability coefficients of several gases in the two membranes were measured finding that hydrogenation of the norbornene moieties decreases gas permeability. The transition states approach was used to determine the trajectories of the gases in the two types of membranes from which the diffusion coefficients were obtained. Monte Carlo techniques based on the Widom method were used to simulate gas sorption process as a function of pressure. The values of the solubility coefficients thus obtained undergo a relatively sharp drop at low pressures approaching to a constant value as pressure increases. With the exception of carbon dioxide, pretty good agreement between the experimental and simulated values of the permeability coefficient is found for the gases studied.     

Synthesis of beta-lactams bearing functionalized side chains from a readily available precursor

The reaction of chlorosulfonyl isocyanate (CSI) with alkenes provides beta-lactams in quantity, and the products have frequently been used for ring-opening polymerization to generate nylon-3 materials. Prior uses of this approach have focused almost entirely on beta-lactams with purely hydrocarbon substitutents. We show how a variety of beta-lactams bearing protected polar substituents can be generated from CSI-derived building blocks.     

Synthesis and photophysical properties of polyphenylquinoxalines with thiophene and benzothiophene units in side chains

New bis(α-diketones) with thiophene and benzothiophene moieties were synthesized. A series of new polyphenylquinoxalines containing these moieties in side chains was prepared via polycondensation of these diketones with different aromatic tetramines. The polymers are soluble in a variety of organic solvents, and their solutions form transparent films having a tensile strength of σ = 80–100 MPa and an elongation at break of ? = 5–12%. The polymers exhibit fluorescence in solution in trifluoroacetic acid and in films with a maximum at 430–570 and 460–480 nm. The 10% mass loss temperature in air ranges within 440–490°C.     

Synthesis and properties of new polyimides containing flourinated alkoxy side chains

A series of new polyimides containing fluorinated alkoxy side chains are prepared from novel fluorinated alkoxy diamines. The dieletric constant at 1 kHz in the fluorinated polyimides decreases from 3.3 to 2.6 as fluorine content increases. The refractive index also changes from 1.58 to 1.48, dependent on the fluorine content. In addition, the fluorinated polyimides exhibit lower water absorption than the reference polyimides prepared from m-phenylenediamine.     

Synthesis and photophysical properties of new carbon-chain copolymers with europium-containing and carbazole fragments in pendant chains

Functionalized polynorbornenes with terpyridine and carbazole groups in pendant chains were prepared by metathesis copolymerization. The polymeric products prepared react with europium thenoyltrifluoroacetonate to form new carbon-chain copolymers with different ratios of organic and europium-containing units. The polymeric materials prepared were characterized by IR and NMR spectroscopy, gel permeation chromatography, differential scanning calorimetry, and elemental analysis. All the europium-containing copolymers exhibit strong metal-centered photoluminescence in solution and in thin film.     

Synthesis and luminescence of polyphosphazenes with carbazolyl side chains

Two new blue‐light‐emitting polyphosphazenes ( 1 and 2 ) containing carbazolyl groups as side chains were synthesized from a highly reactive macromolecular intermediate by a nucleophilic substitution reaction. Molecular structural characterization for the polymers was presented by ¹H NMR, IR, and ultraviolet–visible spectra, gel permeation chromatography, and differential scanning calorimetry. The polymers exhibited excellent solubility in common organic solvents and were thermally stable. A fluorescence analysis of the two materials in tetrahydrofuran showed a strong blue light emitting. The quantum yields of the polyphosphazenes were 0.55 for 1 and 0.64 for 2 , relative to quinoline (in 0.1 N H₂SO₄). An electroluminescent diode was fabricated, and a bright blue light was observed; the maximum external quantum efficiency was about 0.026% at an applied forward voltage of 23 V. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3428–3433, 2001     

Synthesis of substituted norbornenes and their polymerization to polynorbornenes with flexible aliphatic side‐chains

Synthesis and characterization of new thermally stable polynorbornenes functionalized with pendent flexible side‐chains are reported. The flexible side‐chains with terminal hydroxy groups were synthesized via S_NAr reactions of cyclopentadienyliron‐complexed chlorobenzenes with aliphatic diols. Condensation of these side‐chains with exo,endo‐5‐norbornene‐2‐carboxylic acid led to the formation of substituted monomers which were characterized using one‐ and two‐dimensional NMR techniques. Ring‐opening metathesis polymerization of these monomers yielded polynorbornenes with pendent side‐chains.     

Langmuir-Blodgett films of polymethacrylates with side chains containing functionalized aromatic schiff's bases

Langmuir-Blodgett (LB) film formation has been investigated for polymers in which non-linear optical (NLO) moieties are attached to the side chain of a polymethacrylate (PMA) backbone. Polymer monolayers were successfully transferred onto hydrophilic glass substrates using a moving-wall type LB trough. The LB films were characterized by pressure-area isotherms, polarized ultraviolet visible spectra, ellipsometry, and second harmonic generation measurements. The characterization shows that NLO moieties in the side chain are inclined at a shallow angle to the plane of the substrate. The second-order nonlinear optical coefficient and molecular hyperpolarizability were also calculated. © 1993 John Wiley & Sons, Inc.     

Synthesis and lectin-binding activity of luminescent silica particles peripherally functionalized with lactose

A novel O-protected lactose (Galβ1→4Glcβ1-) derivative bearing trimethoxysilyl group at the aglycon was developed as a silane coupling agent. Reaction of the coupling agent with tris(2,2′-bipyridine)ruthenium (II) dichloride (Rubpy) doped silica particle gave a Rubpy-doped silica particle peripherally functionalized with O-protected lactose derivative. De-O-protection of the particle with aqueous ammonia provided lactose-coating Rubpy-doped silica particles, combining luminophor encapsulated in silica matrix and carbohydrate having lectin-recognition ability. Specific adhesion of fluorescein isothiocyanate-labeled peanut agglutinin (FITC-PNA) to the lactose-coating Rubpy-doped silica particles was confirmed by fluorescence microscopic analysis.     

Synthesis and photovoltaic properties of two-dimensional conjugated polythiophenes with bi(thienylenevinylene) side chains

Three two-dimensional (2-D) conjugated polythiophenes with bi(thienylenevinylene) side chains (biTV-PTs), P1, P2, and P3, were designed and synthesized for application in polymer solar cells. The absorption spectral, electrochemical, and photovoltaic properties of the biTV-PTs were investigated and compared with those of poly(3-hexylthiophene) (P3HT). The biTV-PTs show a broad absorption band from 350 to 650 nm; especially, the absorption spectrum of P3 displays a broad plateau and much stronger absorbance than that of P3HT in the wavelength range from 350 to 480 nm. Cyclic voltammograms reveal that the onset oxidation and reduction potentials of the biTV-PTs positively shifted by ca. 0.2 V in comparison with those of P3HT, indicating that the HOMO energy level of the biTV-PTs is ca. 0.2 eV lower than that of P3HT. Polymer solar cells (PSCs) were fabricated based on the blend of the polymers and 1-(3-methoxycarbonyl)propyl-1-phenyl-[6,6]-C-61 (PCBM) with a weight ratio of 1:1. The open circuit voltage of the PSCs based on the biTV-PTs is ca. 0.1 V higher than that of P3HT, which is benefited from the lower HOMO levels of the biTV-PTs. The maximum power conversion efficiency (PCE) of the PSCs based on P3 reached 3.18% under AM 1.5, 100 mW/cm2, which is 38% increased in comparison with that (2.41%) of the devices based on P3HT under the same experimental conditions. The results indicate that the 2-D conjugated biTV-PTs are promising polymer photovoltaic materials.     

Synthesis of apiose-containing oligosaccharide fragments of the plant cell wall: fragments of rhamnogalacturonan-II side chains A and B, and apiogalacturonan

Fragments of pectic polysaccharides rhamnogalacturonan-II (RG-II) and apiogalacturonan were synthesised using p-tolylthio apiofuranoside derivatives as key building blocks. Apiofuranose thioglycosides can be conveniently prepared by cyclization of the corresponding dithioacetals possessing a 2,3-O-isopropylidene group, which is required for preservation of the correct (3R) configuration of the apiofuranose ring. The remarkable stability of this protecting group in apiofuranose derivatives requires its replacement with a more reactive protecting group, such as a benzylidene acetal which was used in the synthesis of trisaccharide β-Rhap-(1→3')-β-Apif-(1→2)-α-GalAp-OMe. The X-ray crystal structure of the protected precursor of this trisaccharide has been elucidated.