一例夹心型含锰铋钨酸盐的合成、结构及磁学性质

在水相中合成了一例新的夹心型含锰铋钨酸盐Na₉H[（Mn （H₂O）₃）₂（Mn （H₂O）₂）（WO₂）（BiW₉O₃₃）₂]·30H₂O （1）。通过元素分析、紫外光谱、红外光谱、粉末X射线衍射、单晶X射线衍射和热重分析对其进行了结构表征。单晶结构分析表明化合物1中的阴离子是由2个三缺位Keggin型β-B-[BiW₉O₃₃]^9-阴离子内、外连接2个[（Mn （H₂O）₂）_0.5（WO₂）_0.5]²⁺配阳离子和2个[Mn （H₂O）₃]²⁺亚单元组成。磁学性质研究表明在化合物1中锰离子之间存在反铁磁耦合作用。     

钴取代的链状Strandberg结构磷钼酸盐的合成及其对Aβ错误折叠聚集过程的调节

设计并合成了一例钴取代的Strandberg结构的磷钼酸盐（H₂en）₆{[Co （H₂O）₄]（P₂Mo₅O₂₃）}₃·11H₂O （简称CoPM,en=乙二胺）,其结构通过元素分析、红外光谱、热重分析以及X射线单晶衍射进行了表征。结果显示,CoPM是由磷钼氧簇[P₂Mo₅O₂₃]^6-和钴配合物[Co （H₂O）₄]²⁺交替连接而形成链状结构,其中每个循环单元包含3个{[Co （H₂O）₄]（P₂Mo₅O₂₃）}^4-结构单位,它们各自的延展方向与配位环境均不相同。利用硫黄素T荧光法、比浊法、圆二色谱、NMR等研究了CoPM对淀粉样蛋白（Aβ）错误折叠过程的干预,发现CoPM能够通过调节β错误构象,从而减少有害聚集体的形成。2'',7''-二氯荧光素（DCF）荧光及细胞毒性实验表明CoPM还可以消除由Cu²⁺-Aβ所产生的活性氧物种（ROS）,进而保护PC12细胞及其突触免受Aβ错误折叠聚集体及氧化应激的损害。     

有机杂化硫代碲酸盐化合物（H2en）TeS3和[Ni（en）3]TeS3的溶剂热合成与表征

用低温溶剂热法合成了2种分立结构的有机杂化硫代碲（Ⅳ）酸盐化合物（H₂en）TeS₃（1）和[Ni（en）₃]TeS₃（2）（en=乙二胺）,通过X-射线单晶衍射,红外光谱,元素分析等手段对它们的结构进行了表征。晶体结构解析结果表明：2个化合物均属单斜晶系,空间群分别为P2₁和P2₁/c。化合物1和2具有孤立三角锥[TeS₃]^2-阴离子,化合物1的平衡阳离子为双质子化乙二胺[H₂en]²⁺,阴离子基团[TeS₃]^2-和阳离子基团[H₂en]²⁺之间通过N-H…S氢键连接。化合物2的阳离子基团为过渡金属Ni与乙二胺的配合物[Ni（en）₃]²⁺。另外,对该2种晶体进行了紫外-可见漫反射光谱测试和热重分析。     

3,5-二(2',5'-苯二羧酸)苯甲酸构筑的金属有机配合物的荧光识别及磁性

设计合成了3种新颖的金属有机配合物（MOCs）：{[Pb₂（HL）（phen）]·2H₂O}_n（1）,{[Ni（H₃L）（4,4''-bipy）_1.5（H₂O）₄]·6H₂O}_n（2）和{[Ni₂（HL）（1,4-bibb）（H₂O）]·（CH₃CN）·H₂O}_n（3）（H₅L=3,5-二（2'',5''-苯二羧酸）苯甲酸,phen=1,10-菲咯啉,4,4''-bipy=4,4''-联吡啶,1,4-bibb=1,4-二（苯并咪唑）苯）,并通过单晶X射线衍射、红外光谱（IR）、热重分析（TG）和粉末衍射对它们进行结构表征。结构分析表明1是基于[Pb₂（μ₂-COO）₂（μ₁-COO）₄]SBUs的一维链状结构;2是二维层状结构,其拓扑符号为{4.6²}₂{4².6².8²};3是一个3D网络结构,其拓扑符号为{6².8⁴}{6⁴.8²}₂。进一步研究了配合物荧光和磁性能。荧光检测显示,配合物1在水溶液中可以高灵敏识别Fe³⁺和Cr₂O₇^2-离子。同时研究了配合物1对Fe³⁺和Cr₂O₇^2-猝灭机理。磁性分析表明配合物3中的Ni（Ⅱ）离子之间存在反铁磁相互作用。     

两个含双磺酸基团化合物的合成、晶体结构及荧光性质

采用缓慢蒸发溶剂法在水中合成了2个含双磺酸基的化合物A-2,5-DSA·（Hphen）₂·2H₂O（1）和[Co（phen）₂（H₂O）₂]·（A-2,5-DSA）·3H₂O（2）（A-2,5-DSA=苯胺-2,5-二磺酸根离子,phen=1,10-邻菲罗啉）。化合物1中,相邻的质子化的1,10-邻菲罗啉反向堆叠在一起,水分子通过氢键与（Hphen）+和苯胺-2,5-二磺酸根离子相连,形成二维的层状结构。配合物2中,钴离子与2个1,10-邻菲罗啉和2个水分子配位,构成[Co（phen）₂（H₂O）₂]²⁺阳离子。3个自由的水分子通过氢键将苯胺-2,5-二磺酸根离子和[Co（phen）₂（H₂O）₂]²⁺连接形成三维网状结构。两个化合物中苯胺-2,5-二磺酸根离子均起到平衡电荷的作用。室温下2个化合物均具有荧光性质,其最大发射峰分别在601nm和441nm。     

咪唑-芳香多羧酸金属有机骨架化合物的合成、结构及性质

以5-(1H-咪唑)异酞酸(H₂L)为配体,在水热条件下合成了3个金属有机框架化合物:[PrL(HL)(H₂O)₂]·H₂O(1),Er(H_0.5L)₂(2)和[CoL(H₂O)₂]·H₂O(3)。单晶X-射线衍射测试结果表明,3个化合物都属于单斜晶系,P2₁/c空间群。化合物1中,Pr³⁺为九配位,而化合物2和3中,Er³⁺和Co²⁺均为六配位。在镧系配合物1和2中,配体中氮原子未参与配位。1为2D折叠形结构,2为3D框架结构。在过渡金属配合物3中,氮原子与Co²⁺配位,这有助于形成平面二维结构。化合物1和3通过分子间π-π堆积,进一步形成3D结构。3个化合物均展现出较好的热稳定性。     

基于6-(3，5-二羧基苯基)烟酸金属有机配位聚合物的构筑及其荧光识别性能

利用混合配体设计、合成了2种新颖的金属有机配位聚合物：[Cd（HDCPN）（1,4-bib）_0.5（H₂O）₂]_n（1）和{[Zn（HDCPN）（1,2bimb）]·H₂O}_n（2）（H₃DCPN=6-（3,5-二羧基苯基）烟酸,1,4-bib=1,4-二（1-咪唑基）苯,1,2-bimb=1,2-二（咪唑-1-基甲基）苯）,并通过单晶X射线衍射、红外光谱（IR）、热重分析（TG）和粉末衍射对配合物1和2进行结构表征。结构分析表明1和2都显示一维链结构,并通过π…π作用堆积成三维网络空间结构。进一步研究了配合物1和2的荧光性能及1在水溶液中对阳离子和阴离子的识别。荧光检测显示,配合物1在水溶液中高灵敏识别Fe³⁺、Cr₂O₇^2-和CrO₄^2-离子。同时研究了配合物1对Fe³⁺、Cr₂O₇^2-和CrO₄^2-的荧光猝灭机理。     

基于[LnMo12]二十面体的三维稀土钼酸盐骨架的合成、结构及荧光性能

通过缓慢蒸发溶剂法合成了2例新的三维稀土钼酸盐：[Ln （H₂O）₃]₃[LnMo₁₂O₄₂]·xH₂O,其中Ln=Eu （1）、Tb （2）,x=7（1）,10.17（2）。这2种稀土钼酸盐中都含有新颖的二十面体[LnMo₁₂O₄₂]构建单元,该单元通过与{LnO₉}多面体进一步连接形成三维网络。光致发光测试表明,化合物1和2显示出明显不同的发射特征,这与Eu³⁺和Tb³⁺离子的不同能级跃迁密切相关。化合物1表现出较强的红色发射（CIE色度坐标为（0.66,0.33））、高发光强度、较大的荧光量子产率（约60%）,对应于从⁵D₀到⁷F_J （J=4、3、2、1、0）的跃迁;化合物2表现出浅绿色发射（CIE色度坐标为（0.34,0.60））,对应从⁵D₄到⁷F_J （J=6、5、4、3）的能级跃迁,其发光强度较弱和荧光量子产率较低（约20%）。有趣的是,一定量的Tb³⁺引入和大量溶剂分子的存在导致化合物2发生部分荧光猝灭,但对化合物1的荧光几乎没有影响。     

以5-(3-吡啶基)-1H-吡唑-3-羧酸为配体的钴共晶配合物的合成、晶体结构及电化学性质

采用溶剂热法合成了一种新型的钴（Ⅱ）基配合物,即{[Co（Hppc）₂][Co₂（4,4''-bipy）（H₂O）₄]（SO₄）₂·2H₂O}_n （1）,其中H₂ppc=5-（3-吡啶基）-1H-吡唑-3-羧酸,4,4''-bipy=4, 4''-联吡啶。配体H₂ppc是由吡啶环、吡唑环和羧基共同组成,同时兼具了刚性和柔性。通过单晶X射线衍射对配合物1进行了结构测定。结果显示所合成的配合物1结晶在单斜晶系C2/c空间群,包括2个晶体学独立部分：二维层状[Co（Hppc）₂]和一维链状[Co₂（4,4''-bipy）（H₂O）₄]^2-,并形成具有{4⁴·6²}{4}₂拓扑网络结构的共晶化合物。此外,配合物1呈现出良好的电化学发光（ECL）性能以及良好的超级电容器性能。     

基于3，3′，4，4′-四羧基偶氮苯构筑的三个金属配合物的合成、晶体结构及性质

在水热条件下利用H₄ddb配体合成了3个过渡金属配合物[Co₂（ddb）（phen）₂（H₂O）₆]·3H₂O（1）,[Co（ddb）_0.5（bpy）_0.5（H₂O）₃]_n（2）和{[Ag（dpe）]·0.5（H₂ddb）·H₂O}_n（3）（H₄ddb=3,3'',4,4''-四羧基偶氮苯,bpy=4,4''-联吡啶,dpe=1,2-二（4-吡啶基乙烯））,并用元素分析、红外光谱、X射线粉末衍射、X射线单晶衍射对其进行了表征。配合物1为双核结构,基于丰富的氢键作用扩展形成三维超分子网结构。配合物2为基于钴离子通过ddb^4-配体以μ₄：η¹,η¹,η¹,η¹的配位模式连接而成的二维网结构。配合物3是由Ag（Ⅰ）离子与dpe配体形成的直链结构,客体分子H₂ddb^2-通过氢键作用将其扩展为三维超分子结构。此外还研究了配合物1~3的荧光性质和热稳定性。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.