锌卟啉自组装在染料敏化太阳能电池中的应用（英文）

制备了2种锌卟啉天线分子P2与P3,并通过自组装的方法成功地将这些天线分子应用到了染料敏化太阳能电池之中。与传统的D-π-A结构的染料相比,这种策略显示出了明显的优势:可以避免复杂的合成步骤,还可以通过调节天线分子和锚固基团的结构去改善染料的光子捕获能力并减少电荷复合行为。当4-吡啶-4-基苯甲酸(A)作为锚固基团时,经过分子自组装之后,基于A-P2的电池器件显示出了1.68%的转换效率,开路电压为526 mV,短路电流密度为5.39 mA·cm~(-2),这充分说明了自组装策略在染料敏化太阳能电池中得到了很好的应用。而基于A-P3的电池器件能量转换效率只有0.79%,这可能主要是因为天线分子P3较大的位阻减小了染料吸附量的原因造成的。我们另外也测试比较了它们在光学、电化学、光伏性能等方面的差异。     

一种天线分子与卟啉染料自组装在染料敏化太阳能电池中的应用

以卟啉分子H2-pTCPP作为基础染料,通过配位自组装的方法将天线分子S3修饰到染料结构中。结果表明经天线分子修饰后染料敏化太阳能电池器件的整体性能得到了极大的改善。天线效应有效地提高了器件的光子捕获能力,光电流得到了显著的提高,并且电荷复合行为也得到了明显的抑制。基于H2-pTCPP的电池器件显示了1.18%的转换效率,而经过天线分子修饰后的Mn-pTCPP+S3显示了2.64%的转换效率,性能提高了1.2倍。     

上转换发光在染料敏化太阳能电池中的应用

以水热和高温煅烧相结合的方法制备了掺Er³⁺的TiO₂上转换发光层,并将其组装在染料敏化太阳能电池(DSSC)中。通过XRD﹑荧光光谱﹑UV-Vis和电池的光电性能测试,分析了上转换发光层的发光机理及其加入后对染料敏化太阳能电池性能的影响。结果表明,上转换发光层的引入有效地提高了DSSC的光电性能,在80 mW·cm^-2红外光照射下最高光电转换效率达到了0.14‰,比未加上转换发光层的DSSC提高了160%。     

TiO2纳米微球的制备及在染料敏化太阳能电池中的应用

以四氯化钛、盐酸为原料,制备出花状TiO₂纳米微球,利用扫描电子显微镜（SEM）、X射线衍射（XRD）等测试方法,对样品的结构和形貌进行了表征。为了提高TiO₂微球电池的光电性能,利用TiO₂微球作为反射层构造了双层结构的薄膜电极,结果表明,双层结构染料敏化太阳能电池在100 mW·cm^-2（1.5 G）光照条件下,短路光电流J_sc为17.64 mA·cm^-2,开路光电压Voc为0.74 V,填充因子FF为0.63和光电转化效率η为8.33%。相比TiO₂微球制备的太阳能电池,双层结构染料敏化太阳能电池光电转化效率提高至5.3倍。最后对电极中染料的吸附量、电极的光散射性能和电池的电化学阻抗做了进一步研究和分析,研究表明,双层结构电池增强光的捕获能力,从而提高光伏性能。     

2,6-位取代的BODIPY染料敏化剂的合成及其性能

设计合成了3种新型基于氟化硼络合二吡咯甲川(BODIPY)衍生物的D-π-A型光敏染料CB1~3,其结构为:BODIPY核为桥联基团、N-苯基咔唑以不同位点连接BODIPY的2-位作为电子给体单元、氰乙酸连接于BODIPY的6-位作为电子受体单元。运用1H,13C NMR以及MALDI-TOF-MS对所合成的染料CB1-CB3进行了结构表征和确证。对3种染料CB1~CB3进行了UV-Vis和荧光等光物理特性、电化学行为、光伏性能研究,并通过DFT理论计算深入研究了其分子的几何结构与性能之间的关系。3种染料的吸收光谱主要位于420~600 nm 波段,LUMO能级在3.7 eV左右,HOMO能级在5.2 eV左右。N-苯基咔唑2-位与BODIPY相连的CB2,因更平整的分子结构和更为适合的共轭长度,具有更为优良的光谱吸收和分子内电荷迁移性能,因而表现出良好的光伏性能:在AM1.5(100 mW·cm^-2)的光强下,CB2敏化电池的开路电压(V_oc)为550 mV,电流密度(J_sc)为3.71 mA· cm^-2,填充因子(FF)为0.73,总光电转换效率(PCE)为1.49%。     

基于p型光电极的染料敏化太阳能电池研究进展

基于p型光电极的染料敏化太阳能电池是一种受到广泛关注的新型太阳能电池。根据电池的结构不同可以将其分为p型和p-n叠层型染料敏化太阳能电池。其中p-n型叠层染料敏化太阳能电池的理论光电效率可以达到43%,高于传统的基于n型TiO₂光阳极的染料敏化太阳能电池理论效率（30%）,引起了科学界的高度关注。本文将总结基于p型光电极染料敏化太阳能电池（p型和p-n型叠层器件）的研究成果,重点介绍用于p型和p-n型叠层染料敏化太阳能电池的电极材料,染料及电解质的研究进展;同时总结目前该类电池发展中亟需解决的问题以及进一步提高器件效率的途径。     

锚定分子对配位自组装染料敏化太阳能电池性能的影响

介绍了三种卟啉锚定分子ZnPA(im,tz,py)与上层卟啉ZnP构建双层卟啉配位自组装体,研究了三种自组装体染料敏化太阳能电池的光谱性能与光伏性能。光谱性能研究结果表明,采用吡啶基团卟啉染料紫外吸收光谱红移,有效提升光捕获能力。光伏性能研究表明,组装体ZnP-ZnPApy具有较优的光伏性能,其中Jsc=6.04 m A·cm~(-2),η=2.24%,单分子吡啶锚定基团性能也最佳。这些结果与光谱测试结果一致。采用卟啉分子作为锚定基团时,电池性能比有机小分子作为锚定明显提高,双层卟啉自组装结构性能至少是有机小分子锚定的3.7倍。     

3-氨基丙基三甲氧基硅烷自组装提高染料敏化太阳能电池的效率

以3-氨基丙基三甲氧基硅烷(APTS)修饰的二氧化钛为负极制备的染料敏化太阳能电池在100 mW·cm^-2的模拟太阳光照下的短路电流、开路电压、光电转换效率分别为18.32 mA·cm^-2、775.9 mV、9.15%. 而没有经过ATPS修饰的电池三项性能参数分别为18.08 mA·cm^-2、749.9 mV、7.70%, 修饰后电池的光电转换效率提高了18.8%, 同时填充因子由0.57提高为0.64. 暗电流-电压曲线显示起始电压从-0.30 V变化到-0.40 V, 表明二氧化钛电极和电解液之间的暗反应得到了有效抑制, APTS作为阻挡层减少了二氧化钛电极表面的缺陷与表面态. 另外, 通过实验设计, 将APTS与染料层-层自组装于二氧化钛电极上, 通过X射线光电子能谱(XPS)研究了二氧化钛层、APTS、染料的作用形式. 定性与定量结果表明: APTS中的乙氧基部分脱除后形成了Si―O―Ti单桥或者双桥键, 钌染料cis-Ru(dcpyH₂)₂(SCN)₂通过分子中的部分―COOH与APTS中的―NH₂形成的静电作用力吸附在TiO₂电极上. 傅里叶变换红外(FT-IR)光谱的结果进一步证明了这种分子间作用.     

MoS2/CNFs对电极膜厚对染料敏化太阳能电池性能影响

通过静电纺丝技术和水热法成功获得了碳纳米纤维负载二维层状硫化钼（MoS₂/CNFs）,将其作为对电极组装的染料敏化太阳能电池（DSSCs）表现出优异的电化学特性。在DSSCs制备过程中,对电极膜厚对电池性能有很大影响,所以本文重点探究了喷涂法制备的对电极膜厚对其组装的染料敏化电池光电性能影响,获得最佳对电极膜厚。实验结果表明当MoS₂/CNFs复合对电极材料膜厚为8 μm时,电池光电转换效率达到最大值7.78%。     

电化学阻抗谱研究染料/Al2O3交替组装结构的光伏特性及作用机理

使用Al₂O₃和N3染料制备了一种交替组装的结构, 该结构能够提高染料敏化太阳能电池(DSCs)的开路电压(V_oc), 短路电流(J_sc)和转换效率(η). 为了研究(染料/Al₂O₃)交替组装结构的作用机理, 使用电化学阻抗谱技术分析了电池的界面电阻. 分析结果表明, 随着交替组装结构中(染料/Al₂O₃)单元的增加, 光阳极/染料/电解质界面的电阻降低, 电池性能随之提高. 基于电化学阻抗谱分析结果, 建立了一系列的等效电路模型, 从理论上解释了(染料/Al₂O₃)交替组装结构的作用机理.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.