Spectroscopic studies of tungsten ions in PbO–PbF2–SiO2 glasses

40PbO–(10 ? x)PbF₂–50 SiO₂:xWO₃ (where x = 1 to 7 mol%) glasses are prepared in the glass forming region. Spectroscopic studies (UV–Vis absorption, ESR, IR) are carried out for these glasses. Interesting changes are observed in the spectroscopic parameters of these glasses when the concentration of WO₃ is changing in the glass matrix. Two absorption bands are observed around at 830 and 620 nm. ESR signal are measured at room temperature for these glasses, the strength of the signal is increased and hyperfine splitting is resolved with increasing the concentration of WO₃ in the glass matrix. IR transmission gives valuable information about the nature of bonds in the glass matrix. The physical parameters along with spectroscopic parameters are measured.     

Composition analysis of glasses in the PbBr2–PbCl2–PbF2–PbO–P2O5 system

Composition change during the melting process of some glasses in the PbBr₂–PbCl₂–PbF₂–PbO–P₂O₅ system melted at 450–470°C for 15 min was studied. Results show that there was a remarkable difference between the batch composition and the analyzed composition. Large amount of P, Br, Pb, and Cl were lost mainly in the form of PbBr₂, PbCl₂ and P₂O₅. The content of O is influenced by two factors. The incomplete decomposition of NH₄H₂PO₄ or the reaction between P₂O₅ and H₂O in the atmosphere increases the content of O, while the volatilization of P₂O₅ decreases the content of O.     

Piezoelectric and elastic properties of ZnF2–PbO–TeO2: TiO2 glass ceramics

Piezoelectric coefficients d₃₃ as well as ultrasonic velocities and elastic coefficients of ZnF₂–PbO–TeO₂ glasses crystallized with different concentrations of TiO₂ (0.5 to 2.0 wt.%) were measured. The contribution to the piezoelectric coefficients is attributed to presence of Pb₅Ti₃F₁₉, PbTiO₃ and PbTeO₃ ferroelectric crystal phases. The piezoelectric coefficients show substantial sensitivity to presence of TiO₂. The ultrasonic velocities and the related elastic coefficients in these glass ceramics as a functions of concentration of nucleating agent TiO₂ exhibited minimal effect at 1.0 wt.%. This is ascribed to the larger presence of titanium ions in Ti³⁺ states which act as modifiers and finally de-polymerize glass ceramic network. The results have been further discussed quantitatively within a framework of different oxidation states of titanium ions and the nature of the crystal phases ingrained in the glass ceramic.     

Crystallization of bismuth oxide nano-crystallites in a SiO2–PbO–Bi2O3 glass matrix

SiO₂–PbO–Bi₂O₃ glasses having the composition of 35SiO₂–xPbO–(65 ? x)Bi₂O₃ (where x = 5, 20 and 45; in mol%) have been prepared using the conventional melting and annealing method. Differential scanning calorimetry (DSC) was employed to characterize the thermal behavior of the prepared glasses in order to determine their crystallization temperatures (T_cr). It has been found that T_cr decreases with the decrease of Bi₂O₃ content. The amorphous nature of the prepared glasses as well as the crystallinity of the produced glass–ceramics were confirmed by X-ray powder diffraction (XRD) analysis. SiPbBi₂O₆ glass nano-composites, comprising bismuth oxides nano-crystallites, were obtained by controlled heat-treatment of the glasses at their (T_cr) for 10 h. Transmission electron microscopy (TEM) of the glass nano-crystal composites demonstrates the presence of cubic Bi₂O₃ nano-crystallites in the SiPbBi₂O₆ glass matrix. Nano-crystallites mean size has been determined from XRD line width analysis using Scherrer's equation as well as from TEM; and the sizes obtained from both analyses are in good agreement. These sizes varied from about 15 to 170 nm depending on the chemical compositions of parent glasses and, consequently, their structure. Interestingly, replacement of the Bi₂O₃ by PbO in the glass compositions has pronounced effect on the nature, morphology and size of the formed nano-crystallites. Decrease of the Bi₂O₃ content increases the size of the nano-crystallites, and at the lowest Bi₂O₃ extreme, namely 20 mol%, introduces minority of the monoclinic Bi₂O₄ in addition to the cubic Bi₂O₃. The crystallization mechanism is suggested to involve a diffusion controlled growth of the bismuth oxide nano-crystallites in the SiPbBi₂O₆ glass matrix with the zero nucleation rate.     

Radiation induced color centers in 50PbO–50P2O5 glass

The effect of γ-irradiation in the dose range of 5 kGy up to 25 kGy on the optical absorption spectra of 50PbO–50P₂O₅ glasses is reported. The spectral absorption of these glasses before and after γ-irradiation was measured in the spectral range of 300–900 nm at room temperature. The radiation induced absorption in this spectral range shown to consist of two bands centered approximately at 545 nm and 730 nm. The fundamental absorption edge shifts generally to lower energies with increasing γ-irradiation dose up to 25 kGy in this glass sample. The intensity of the induced absorption bands increases linearly with increasing γ-irradiation dose. The higher energy band (HEB) may be due to a hole in a singly bonded non-bridging oxygen distant from a modifier cation, while the lower energy band (LEB) is also due to a hole in similar oxygen which is interacting with a neighboring cation.     

Raman and NMR study of bioactive Na2O–MgO–CaO–P2O5–SiO2 glasses

The results of a structural study combining NMR and Raman spectroscopy of several melt-derived glasses in the system Na₂O–MgO–CaO–P₂O₅–SiO₂ are presented. The Raman spectra show clear changes in the Si–O–Si vibrational modes (related to the bridging oxygen atoms, BO) and also verify the presence of non-bridging oxygen atoms (NBO), also named terminal oxygens. The intensity of the Si–O–NBO stretching mode depends on the cation concentration. It can be concluded from the NMR studies that the MgO-containing samples have orthophosphate units charge-compensated by Ca²⁺ and Mg²⁺. The silicate matrix also contains both types of two-valent cations and consists of Q² and Q¹ units. Similarly, the Na₂O-containing samples contain isolated orthophosphate units in a silicate matrix (Q² and Q³ units), both charge-compensated by mixed cations Ca²⁺ and Na⁺. These experimental data were compared with theoretical parameters given by the Stevels model, which is a suitable tool for understanding bioactive behavior of these glasses. Furthermore, results of the in vitro tests carried out in simulated body fluids are presented and compared with both Raman and NMR structural data.     

Structural role and coordination environment of Fe in Fe2O3–PbO–SiO2–Na2O composite glasses

The structural role, coordination geometry and valence of Fe in a series of Fe₂O₃–PbO–SiO₂–Na₂O glasses are studied by means of Fe-K-NEXAFS and EXAFS spectroscopies. Parameters for the study are the concentration of the Fe and Pb-oxides, the SiO₂/Na₂O ratio and the cast temperature. The EXAFS and NEXAFS results reveal that the role of Fe³⁺ depends on the concentration of Fe₂O₃. More specifically, in most of the studied quaternary systems, the Fe³⁺ ion is a glass former, i.e. the Fe atoms belong to FeO₄ tetrahedra that participate in the formation of the glassy network. The role of Fe as an intermediate oxide is identified only in one sample with 20 wt% Fe₂O₃, where ～80 at.% of the Fe atoms are tetrahedrally coordinated with O atoms, while the remaining ～20 at.% of the Fe atoms occupy octahedral sites. It is also revealed that the tetrahedral coordination of Fe in the vitreous matrix is destroyed when a number of parameters is altered, such as the T_cast, the (Fe + Si)/O and the SiO₂/Na₂O ratio.     

Molecular dynamics simulation for the rapid solidification process of MgO–Al2O3–SiO2 glass–ceramics

A molecular dynamics simulation method was used to study the effects of the microstructure on the solidification process of different cooling rates in the MgO–Al₂O₃–SiO₂ glass–ceramics with cordierite as the main crystalline phase. The reasons for changes in the microstructure during the solidification process were analysed by the radial distribution function curve, the bond angular distribution, the coordination number and the volume changes. The results showed that the cooling rate greatly affected the crystallisation process and the glass transition process. When the cooling rate was too fast, the atoms could not undergo a massive displacement before they were “frozen”, and the ability of atoms to achieve an equilibrium position was limited. Some amorphous phases were formed as a result of the disorder of the atomic arrangement, then some crystalline phase precipitated from the vitreous, and a glass–ceramic material was eventually formed.     

Characteristics and biocompatibility of Na2O–K2O–CaO–MgO–SrO–B2O3–P2O5 borophosphate glass fibers

A novel Na₂O–K₂O–CaO–MgO–SrO–B₂O₃–P₂O₅ borophosphate glass fiber is prepared. The thermal properties including differential thermal analysis (DTA) and viscosity measurement of the glass were presented. The tensile strength of the glass fiber is measured. The reaction of the glass fibers in the SBF solution is characterized by XRD, FTIR and SEM. XRD and FTIR indicate that the carbonate hydroxyapatite has formed rapidly on the glass. Cell attachment, spreading and proliferation on the glass are determined by MTT [3-(4,5-Dimethylthiazol-2-yl)-2,5-Diphenyltetrazolium Bromide] assay method using Human osteosarcoma MG-63 cells. The bioactivity and biocompatibility of the glass fiber make it a good potential prospect in the field of tissue engineering.     

Effect of lead oxide on optical properties of Dy3+ ions in PbO–H3BO3–TiO2–AlF3 glasses

The effect of lead oxide (PbO) on optical properties of Dy³⁺-doped PbO–H₃BO₃–TiO₂–AlF₃ (LBTAFDy) glasses is investigated. The LBTAFDy glasses were prepared with different PbO contents ranging from 30 to 60 mol%. The Judd–Ofelt intensity parameters (Ω_{λ = 2, 4, 6}) are obtained by the least square fit analysis. It is found that the Ω₂ parameter and yellow-to-blue intensity ratio (Y/B) of the Dy³⁺ emission depend on the PbO content in LBTAFDy glass. The structural asymmetry around the Dy³⁺ ion and the DyO covalency are responsible for the changes in Ω₂ parameter and Y/B ratio. The variation of decay time of ⁴F_9/2 emission level with the PbO content also supports the changes in structural asymmetry and DyO covalency in LBTAFDy glass.     

Formation of Co2+-doped nanocrystals in La2O3–MgO–Al2O3–SiO2 glass-ceramics

Transparent glass-ceramics were synthesized by heat-treatment of glass with a composition of 5La₂O₃–13.2MgO–28.8Al₂O₃–46SiO₂–4.5TiO₂–2.5ZrO₂–0.15CoO (LMAS) (wt.%). The activation energy of crystallization and the Avrami parameter for the LMAS glass were determined from the DTA curves at different heating rates. The most two intense bands of Raman spectrum of initial glass at ~ 810 cm^?1 and ~ 900 cm^?1 were connected with the presence of [SiO₄] and [TiO₄] tetrahedral, respectively. After heat-treated at 700 °C/10 h+820 °C/8 h, the intensity of the band for [TiO₄] tetrahedral weakened, while an intensive band at ~ 800 cm^?1 for the Ti–O bond appeared. Other bands were characteristics of high-silicate network and x(MgTi₂O₅)·y(Al₂TiO₅) polycrystals. The changes reflected phase separation after heat-treatment of the initial glass. The strong absorption band of glass-ceramics centered at 580 nm can be assigned to ⁴A₂(⁴F)→⁴T₁(⁴P) and the broad absorption band at 1100–1700 nm to ⁴A₂(⁴F)→⁴T₁(⁴F) transitions of tetrahedral coordinated Co²⁺ ion. Two broad emission bands, one was around 660 nm, the other was from 800 nm to 1050 nm, of glass-ceramics correspond to the ⁴T₁(⁴P)→⁴A₂(⁴F) and ⁴T₁(⁴P)→⁴T₂(⁴F) transitions of tetrahedral coordinated Co²⁺ ions. The absorption and emission features clearly demonstrated that Co²⁺ ions were incorporated into nanocrystals and located in tetrahedral sites.     

Spectroscopic properties of Co2+ ions in La2O3–MgO–Al2O3–SiO2 glass-ceramics

Co²⁺-doped La₂O₃–MgO–Al₂O₃–SiO₂ (LMAS) glass-ceramics was synthesized by conventional method. The microstructure of LMAS GCs heat-treated at 760 °C/12 h + 930 °C/4 h was characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The spectroscopic properties of Co²⁺-doped LMAS GCs were studied by absorption spectrum, excitation spectrum, and temperature dependent luminescence spectra. XRD results revealed the sizes of MgAl₂O₄ crystalline phases are about 9.1 ± 1.5 nm. The three peaks in the visible absorption band of LMAS GCs at 549 nm, 585 nm and 626 nm are connected with the transitions from ⁴A₂ level to ²A₁/²T₂(²G), ⁴T₁(⁴P) and ²E/²T₁(²G) levels, respectively, and excitations into them emit the radiation at around 666 nm. The luminescence intensity increased with temperature increasing from 10 K to 150 K, while it weakened with temperature increasing from 150 K to 350 K. These features were explained by the effects of two competing mechanisms.     

The effect of TiO2 on phase separation and crystallization of glass-ceramics in CaO–MgO–Al2O3–SiO2–Na2O system

The experiments were carried out on studying the effect of phase separation on nucleation and crystallization in the glass based on the system of CaO–MgO–Al₂O₃–SiO₂–Na₂O. In the experiments, TiO₂ was chosen as nucleating agent. Three batches of 5, 8 and 10 wt% TiO₂ substitution were investigated by the techniques of DSC, XRD, FTIR and FESEM equipped with EDS. XRD and FTIR analysis indicated that the super cooled glasses were all amorphous, the heat treatment leading to nucleation would cause a disruption of silica network which followed phase separation. The phase separation followed the generation of crystal seeds Mg(Ti, Al)₂O₆. FESEM observation and EDS analysis revealed that the more TiO₂ content of glass, the more droplet separated phase and crystal seeds after nucleation heat treatment. The main crystal phase is clinopyroxene, Ca(Ti, Mg, Al)(Al, Si)O₆, of crystallized glass.     

The effect of composition and temperature on the amount and type of nanoferrite particles inserted in Fe2O3–ZnO–MgO–SiO2 glass–ceramics

Glass–ceramics with the composition 2Fe₂O₃.1ZnO.1MgO.96SiO₂ [4ZnMgFe] and 2Fe₂O₃.2ZnO.3MgO.93SiO₂ [7ZnMgFe] (mol%) were prepared using the sol–gel method. X-ray diffraction (XRD), scanning electron microscopy (SEM), electron diffraction (ED) and Mössbauer spectroscopy (MS) were used to investigate the glass–ceramics structure. The samples contain ferrite nanoparticles embedded in a glass matrix. However, zinc ferrite nanoparticles seems to be the preferential crystalline phase formed. The amount of ferrite particles depends on treatment temperature and sample composition. The Mössbauer spectroscopy measurements show that ferrite nanoparticles can exhibit a ferrimagnetic behaviour combined with superparamagnetism.     

Effect of the ytterbium concentration on the upconversion luminescence of Yb3+/Er3+ co-doped PbO–GeO2–Ga2O3 glasses

The effect of Yb³⁺ concentration on the frequency upconversion (UPC) of Er³⁺ in PbO–GeO₂–Ga₂O₃ glasses is reported for the first time. Samples were prepared with 0.5 wt% of Er₂O₃ and different concentrations of Yb₂O₃ (1.0–5.0 wt%). The green (523 and 545 nm) and red (657 nm) emissions are observed under 980 nm diode laser excitation. The dependence of the frequency UPC emission intensity upon the excitation power was examined and the UPC mechanisms are discussed. An interesting characteristic of these glasses is the increase of the ratio of red to green emission, through an increase of the Yb³⁺ concentration due to an efficient energy transfer from Yb³⁺ to Er³⁺.     

水热法生长立方MgO微晶研究

以尿素与Mg(NO3)2·6H2O在不同的反应温度和不同物质的量配比条件下,制备出前驱体Mg5(OH)2(CO3)4·4H2O/MgCO3,经煅烧得到立方MgO微晶粉末.利用X射线衍射仪(XRD)和扫描电子显微镜(SEM)对所制得产物的晶相和形貌进行了表征.结果表明:当尿素和Mg(NO3)2·6H2O物质的量的比为2∶1时,在160℃的水热反应条件下,制备出立方MgO前驱体微晶,在1000℃煅烧2h后能够获得晶型完整、形貌规则、粒径约为5μm的MgO立方微晶.     

Dielectric properties,conductivity, UV–visible and infrared spectroscopy of PbO P2O5 NaF glasses containing WO3

Homogeneous (50P₂O₅–(30 ? x)PbO–20NaF–xWO₃ where x = 0.0, 5, 10 and 15 mol%) glasses were synthesized using a melt-quenching method. The short range structures of the phosphate samples were examined by Fourier transform infrared spectroscopy. The infrared spectral studies have pointed out the existence of conventional PO₄, WO₄ and WO₆ structural units in the glass network, the number of WO₄ tetrahedra decreases as WO₃ concentration increases. The optical transmittance and reflectance spectrum of the glasses have been recorded in the wavelength range of 190–1100 nm. The values of the optical band gap E_op for all types of electronic transitions and refractive index have been determined and discussed. The real and imaginary parts ε₁ and ε₂ of the dielectric constant have been determined. The type of electronic transitions in the present glass system is indirectly allowed and the high values for the refractive index and dispersion are recorded due to the high polarizability of tungsten ions. The results of refractive indices as determined reveal the homogeneity of samples and were found to depend on the glass composition. The electrical properties of the glasses were investigated by ac conductivity from 0.12 to 100 kHz for temperatures ranging from room temperature to 600 K. The study of dielectric properties suggested increase in the insulating character of the glass system with increase in the content of WO₃. The ac conductivity in the high temperature region seems to be connected mainly with the polarons involved in the process of transfer from W⁴⁺ to W⁵⁺ ions.     

The leaching behavior of PbOSiO2 glasses

The leached layer of PbOSiO₂ glasses formed by diluted nitric acid solution has been investigated by ellipsometry and Auger electron spectroscopy (AES). The leaching behavior of PbOSiO₂ glasses in 10^?4 N aqueous solution of NHO₃ at 30°C was measured in real time using a Nikon auto-ellipsometer.The results were applied by curve fitting to the two-layer model from the concentration profile obtained by AES, and the refractive index profile against the film thickness was determined.The leached layer is inhomogeneous and consists of a low refractive index region and a transition region. The gradient of the refractive index in the former region is extremely small and the refractive index becomes nearly constant between 1.42 and 1.44. The shape of latter region becomes stable with its thickness at 100–310 Å, and moves in the direction of depth without changing the shape as the leaching proceeds.