添加NaBF4对阳极氧化法制备TiO2纳米管光催化剂的影响

在阳极氧化电解液中添加NaBF₄制得了具可见光活性的B掺杂TiO₂纳米管阵列（B/TNTs）。采用扫描电镜（FE-SEM）、能谱仪（EDS）、X射线衍射（XRD）、傅立叶红外光谱（FTIR）、紫外-可见漫反射光谱（UV-Vis DRS）以及X射线光电子能谱（XPS）对样品进行表征,以亚甲基蓝（MB）的光催化降解为目标反应评价其光催化活性。结果表明：添加NaBF₄后,TiO₂纳米管表面形貌变化较大;B掺入到TiO₂晶格中形成B-O-Ti键;B掺杂使得TiO₂纳米管表面羟基量增加、光学带隙能减小、光吸收阀值红移,且B掺杂量越多,其相应值的变化量越大;B掺杂能促进TiO₂锐钛矿相的发育,纳米管经550℃煅烧后仍保持未掺杂样品的锐钛矿相结构;NaBF₄的最佳添加量为0.6%（w/w）时,所得样品光催化活性最佳,可见光下光催化降解MB的4 h降解率由未添加的39.90%提高至75.15%,且反复使用10次后其光催化性能基本保持不变;总有机碳（TOC）分析结果表明,MB在可见光下能被B/TiO₂有效矿化。     

EDTA有效促进石墨相氮化碳(g-C3N4)光催化降解甲基橙

研究了在光照下,乙二胺四乙酸（EDTA）的添加促进石墨相氮化碳（g-C₃N₄）光催化降解甲基橙（MO）.研究了H⁺和羧酸根负离子对光降解MO的影响.紫外-可见漫反射光谱（DRS）研究表明,EDTA的加入并没有改变g-C₃N₄的电子结构和光电特性.EDTA的加入捕获了空穴（h⁺）,促进了光生e^-/h⁺对的分离,从而使光降解活性提高.证明了·O₂^-是光催化降解过程中的主要活性物种.基于上述研究结果,我们提出了一种可能的EDTA促进g-C₃N₄光催化降解MO的机理.这些结果为提高g-C₃N₄光催化降解水体中有机污染物的性能提供了一种新方法.     

含Ce水滑石基复合氧化物对混合染料的光催化性能

将具有光催化活性的CeO₂和锌锡水滑石进行复合,经焙烧得到光催化性能较高的CeO₂/ZnO/SnO₂复合氧化物。通过X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和紫外-可见漫反射图谱(UV-Vis DRS)技术对样品的晶体结构、表面形貌和光学性能进行表征,并利用密度泛函理论(DFT)计算样品的态密度,分析其电子能态结构。以甲基橙(MO)和亚甲基蓝(MB)的混合溶液(C_MO:C_MB=1:1)模拟染料废水,研究CeO₂含量和焙烧温度对复合氧化物光催化降解混合染料的影响。结果表明:随着CeO₂含量和焙烧温度的增加,复合氧化物的结晶度及对MO和MB的光催化活性得到增强;同时,复合氧化物对混合染料中MO的降解率优于MB。其中CeO₂含量为20%,焙烧温度为700℃时的复合氧化物表现出最佳的光催化性能,对混合染料中MO和MB的降解率分别达到96.7%和95.0%。结合实验结果和理论计算,推测了混合染料中MO和MB的降解路径。     

基于苯四酸和双咪唑甲基苯构筑的Co(Ⅱ)和Ni(Ⅱ)配合物的合成、晶体结构及光催化活性

在水热条件下，得到了2例新的配位聚合物[Co（L）_0.5（1，3-bib）] （1）和[Ni₂（L）（1，4-bib）₃（H₂O）₂]·2H₂O （2），其中H₄L=1，2，4，5-苯四酸，1，3-bib=1，3-双（（1H-咪唑1-基）甲基）苯，1，4-bib=1，4-双（（1H-咪唑1-基）甲基）苯。并利用元素分析、红外光谱、单晶X射线衍射等对其进行了结构表征。结果表明：1和2均为三维网状结构，完全去质子化的配体（L^4-）在1和2中分别采取了μ₄-к²：к¹：к²：к¹和μ₂-к¹：к⁰：к¹：к⁰的配位方式。进一步的研究表明，配合物1在H₂O₂和可见光照射的条件下，在水溶液中对染料甲基橙（MO）和亚甲蓝（MB）有很好的降解效果：在180 min时，降解率分别达到83.2%和84.5%。配合物2在同样的条件下，在水溶液中对染料MB和罗丹明B（RhB）也有较好的降解作用：在180 min时，降解率分别为87.0%和77.4%。此外还详细探讨了1和2对染料光催化降解的机理。     

溶胶-凝胶法低温制备N掺杂TiO2可见光光催化剂

为了满足低温制备可见光光催化材料的需要,采用溶胶-凝胶法制备TiO₂纳米晶溶胶,再与聚乙烯基吡咯烷酮(PVP)直接反应制备N掺杂TiO₂可见光光催化剂。通过XPS分析,说明N取代了部分晶格中的O,UV-Vis漫反射吸收光谱显示,光催化剂具有明显的可见光响应,这是由于N原子的2p轨道位于O原子的2p轨道之上,从而使得价带和导带间的能量带隙变窄,引起吸收带红移,产生明显的可见光吸收。依靠亚甲基兰(MB)的可见光降解实验证明,N掺杂光催化剂具有良好的可见光光催化活性,16 h MB降解率接近25％。     

Ag/质子化g-C3N4纳米棒材料的制备及其光催化降解性能

制备了 Ag 负载于质子化 g-C₃N₄(pCN)的纳米棒材料(Ag/pCN),对比了 g-C₃N₄(CN)、表面负载 Ag 的 CN(Ag/CN)、pCN 和 Ag/pCN在可见光条件下光催化降解亚甲蓝(MB)溶液的效果。结果表明,Ag/pCN光催化效率最高(92.63%),并且具有良好的稳定性;通过光电流-时间(I-t)曲线、Nyquist曲线、Mott-Schokkty曲线和捕获实验探究了Ag/pCN光催化降解MB的机理：虽然pCN的π共轭体系较CN发生变化,但由于形成了纳米棒,其比表面积的增加以及Ag负载的协同效应致使Ag/pCN具有优异的光催化性能。光催化过程中羟基自由基(·OH)是起主要作用的活性物质,其由光生电子(e^-)与表面吸附的 O₂反应产生以及光生空穴(h⁺)与H₂O或OH^-反应产生。     

Ag/质子化g-C3N4纳米棒材料的制备及其光催化降解性能

制备了 Ag 负载于质子化 g-C₃N₄(pCN)的纳米棒材料(Ag/pCN),对比了 g-C₃N₄(CN)、表面负载 Ag 的 CN(Ag/CN)、pCN 和 Ag/pCN在可见光条件下光催化降解亚甲蓝(MB)溶液的效果。结果表明,Ag/pCN光催化效率最高(92.63%),并且具有良好的稳定性;通过光电流-时间(I-t)曲线、Nyquist曲线、Mott-Schokkty曲线和捕获实验探究了Ag/pCN光催化降解MB的机理：虽然pCN的π共轭体系较CN发生变化,但由于形成了纳米棒,其比表面积的增加以及Ag负载的协同效应致使Ag/pCN具有优异的光催化性能。光催化过程中羟基自由基(·OH)是起主要作用的活性物质,其由光生电子(e^-)与表面吸附的 O₂反应产生以及光生空穴(h⁺)与H₂O或OH^-反应产生。     

基于四氮唑的Cu(Ⅰ)/Cu（Ⅱ）配合物及其可见光催化降解有机污染物

利用1,2,4,5-四（2H-四氮唑）苯配体（H4TTB）和三苯基磷（PPh₃）与氰化亚铜在水热/溶剂热条件下的反应得到一价铜配合物[Cu₂（TTB）_0.5（PPh₃）]_n （1）和二价铜配合物{[Cu（TTB）_0.5（H₂O）₂]·H₂O}_n（2）,并通过红外光谱、热稳定性分析和X-射线粉末衍射对它们进行了表征。X射线单晶结构解析表明,1中的每个TTB^4-配体都有12个N原子参与配位,进而使得配合物1拥有了二维的骨架结构,而配合物2则呈现出一维双Cu²⁺链结构。这两个配合物在可见光照射下对罗丹明B（RhB）和亚甲基蓝（MB）都表现出很好的催化降解性能：氙灯照射1 h,一价铜配合物1和二价铜配合物2对RhB的降解率分别达到了88%和78%;而这两个配合物对MB的降解效果更好,在40 min后都达到了93%,这也说明一价铜配合物和二价铜配合物都能有效的光催化降解有机染料。     

AAO辅助三唑亚铁纳米材料:一维限制生长和二维表面成膜及自旋转换性能

通过连续多步自组装的方式分别将三唑亚铁（SCO1）和氨基三唑亚铁（SCO2）自旋转换纳米材料生长于氧化铝模板（AAO）的孔道内和表面上。利用扫描电镜（SEM）、红外光谱（IR）、粉末X射线衍射（PXRD）、拉曼光谱（Raman）等手段对SCO1-1D+2D和SCO2-1D+2D纳米材料进行表征,SEM表明随着自组装时间的增加,球状的SCO纳米颗粒生长于AAO孔道内,并逐渐形成1D的纳米结构,而在AAO表面则形成致密均匀的SCO-2D薄膜。两种SCO-1D+2D纳米粒子都具有两步自旋行为（SCO1-1D+2D：T_c1↑=319 K,T_c1↓=313 K,T_c2↑=381 K,T_c2↓=340 K;SCO2-1D+2D：T_c1↑=181 K,T_c1↓=155 K,T_c2↑=246 K,T_c2↓=233 K）。对相应的SCO-1D和SCO-2D磁性结果表明,两步自旋转换行为的产生是由于SCO组装体形貌的差异。其中,低温区的自旋转换行为是由生长于AAO表面的SCO-2D自旋转换性能所致,而发生在更高温度的第二阶段的自旋转换行为则归因于生长于AAO孔道内的SCO-1D的自旋转换性能。     

AAO辅助三唑亚铁纳米材料:一维限制生长和二维表面成膜及自旋转换性能

通过连续多步自组装的方式分别将三唑亚铁（SCO1）和氨基三唑亚铁（SCO2）自旋转换纳米材料生长于氧化铝模板（AAO）的孔道内和表面上。利用扫描电镜（SEM）、红外光谱（IR）、粉末X射线衍射（PXRD）、拉曼光谱（Raman）等手段对SCO1-1D+2D和SCO2-1D+2D纳米材料进行表征,SEM表明随着自组装时间的增加,球状的SCO纳米颗粒生长于AAO孔道内,并逐渐形成1D的纳米结构,而在AAO表面则形成致密均匀的SCO-2D薄膜。两种SCO-1D+2D纳米粒子都具有两步自旋行为（SCO1-1D+2D：T_c1↑=319 K,T_c1↓=313 K,T_c2↑=381 K,T_c2↓=340 K;SCO2-1D+2D：T_c1↑=181 K,T_c1↓=155 K,T_c2↑=246 K,T_c2↓=233 K）。对相应的SCO-1D和SCO-2D磁性结果表明,两步自旋转换行为的产生是由于SCO组装体形貌的差异。其中,低温区的自旋转换行为是由生长于AAO表面的SCO-2D自旋转换性能所致,而发生在更高温度的第二阶段的自旋转换行为则归因于生长于AAO孔道内的SCO-1D的自旋转换性能。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Thermodynamics of the formation of oxosulfides of rare-earth elements

The enthalpies of solution of several oxosulfides of rare-earth elements and the high-temperature enthalpies of oxosulfides and oxosulfates of lanthanum and yttrium were measured using solution calorimetry and high-temperature microcalorimetry techniques. Standard enthalpies of formation and some thermodynamic properties of oxosulfides and oxosulfates were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2 pp. 294–297, February, 1997.     

恶臭嗅辨实验室建设探讨

针对恶臭测试的环境影响问题,提出了解决的实例方案,并对方案的要点及优缺点进行讨论,此方案在实际操作中具有较好的效果。