Influence of thermal and thermoelectric treatments on structure and electric properties of B2O3–Li2O–Nb2O5 glasses

A transparent glass with the composition 60B₂O₃–30Li₂O–10Nb₂O₅ (mol%) was prepared by the melt quenching technique. The glass was heat-treated with and without the application of an external electric field. The as-prepared sample was heat-treated (HT) at 450, 500 and 550 °C and thermoelectric treated (TET) at 500 °C. The following electric fields were used: 50 kV/m and 100 kV/m. Differential thermal analysis (DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman, dc and ac conductivity, as a function of temperature, were used to investigate the glass and glass-ceramics properties. LiNbO₃ crystals were detected, by XRD, in the 500 °C HT, 550 °C HT and 500 °C TET samples. The presence of an external electric field, during the heat-treatment process, improves the formation of LiNbO₃ nanocrystals at lower temperatures. However, in the 550 °C HT and in the TET samples, Li₂B₄O₇ was also detected. The value of the σ_dc decreases with the rise of the applied field, during the heat-treatment. This behavior can indicate an increase in the fraction of the LiNbO₃ crystallites present in these glass samples. The dc and ac conduction processes show dependence on the number of the ions inserted in the glass as network modifiers.The Raman analysis suggests that the niobium ions are, probably, inserted in the glass matrix as network formers.These results reflect the decisive effect of temperature and electric field applied during the thermoelectric treatment in the structure and electric properties of glass-ceramics.     

FTIR and UV–VIS spectroscopy investigations on the structure of the europium–lead–tellurate glasses

Glasses in the xEu₂O₃·(100-x)[4TeO₂·PbO₂] system where 0 ≤ x ≤ 50 mol% have been prepared using the melt quenching method. The influence of europium ions on the structure of lead–tellurate glasses has been investigated using density measurements, FTIR and UV–VIS spectroscopy. Structural changes produced by increasing the rare earth concentration were followed.The europium and lead ions show a preference towards [TeO₃] structural units causing a deformation of the TeOTe linkages. Structural changes inferred by analyzing the band shapes of IR spectra revealed that the increase of the Eu^+ 3 content causes the intercalation of [EuO_n] entities in the [TeO₄] chain network. The excess of oxygen can be supported into the glass network by the formation of [PbO_n] and [EuO_n] structural units.The UV–VIS spectroscopy data show that europium ions enter the glass matrix in the Eu²⁺ and Eu³⁺ valence states, the last being predominant in the studied glasses. The Pb^+ 2 ions produce strong absorption in the ultraviolet domain.     

Structure and properties of NaPO3–ZnO–Nb2O5–Al2O3 glasses

In an effort to design low-melting, durable, transparent glasses, two series of glasses have been prepared in the NaPO₃–ZnO–Nb₂O₅–Al₂O₃ system with ZnO/Nb₂O₅ ratio of 2 and 1. The addition of ZnO and Nb₂O₅ to the sodium aluminophosphate matrix yields a linear increase of properties such as glass transition temperature, density, refractive index and elastic moduli. The chemical durability is also significantly, but nonlinearly, improved. The glass with the highest niobium concentration, 55NaPO₃–20ZnO–20Nb₂O₅–5Al₂O₃ was found to have a dissolution rate of 4.5 × 10^? 8 g cm^? 2 min^? 1, comparable to window glass. Structural models of the glasses were developed using Raman spectroscopy and nuclear magnetic resonance spectroscopy, and the models were correlated with the compositional dependence of the properties.     

Spectroscopic properties and ab initio calculations on the structure of erbium–zinc-borate glasses and glass ceramics

Glasses in the (Er₂O₃)_x·(B₂O₃)_(60 ? x)·(ZnO)₄₀ system (0 ≤ x ≤ 15 mol%) have been prepared by the melt quenching technique. X-ray diffraction, FTIR spectroscopy, UV-VIS spectroscopy and ab initio calculations studies have been employed to study the role of Er₂O₃ content on the structure of the investigated glass system.X-ray diffraction and infrared spectra of the glasses reveal that the B–O–B bonds may be broken with the creation of new non-bridging oxygen ions facilitating the formation of Er–O–B linkages. The excess of oxygen can be accommodated in the network by the conversion of sp² planar [BO₃] units to the more stable sp³ [BO₄] tetrahedral structural units. The linkages of the [BO₄] structural units can polymerize in [B₃O₉]^? 9 cyclic trimeric ions which will produce the ErBO₃ crystalline phase. An increase of the efficiency corresponding to the ⁴I_15/2 state to ⁴I_11/2 state (4f–4f) transitions of Er^+ 3 ions was observed for the erbium oxide richest glasses.Ab initio calculations on the structure of the matrix network show the thermodynamic instability of the [BO₄], [ZnO₄] and [Zn₄O] structural units. Formation of three-coordination oxygens was necessary to compensate shortage of oxygens from zinc ions.     

Preparation and properties of europium-doped phosphosilicate glasses obtained by the sol–gel method

In this work, we report the synthesis of europium-doped phosphosilicate glasses from tetraethylorthosilicate (TEOS), phenyltrietoxysilane (PTES) and ammonium phosphate (NH₄H₂PO₄) prepared by the sol–gel process. The matrix was synthesized by modified Stöber methodology. The alkoxide precursors PTES and TEOS were mixed with NH₄H₂PO₄, in the presence of europium III chloride, using ethanol as solvent in basic catalysis. These materials were studied by photoluminescence spectroscopy (PL), thermal analysis (TGA/DTA), transmission electron microscopy (TEM) and energy-dispersive spectroscopy (EDS). The results obtained for the materials show the formation of conchoidal-fractures, which are characteristics of glass materials. The thermal analysis showed the thermal stability of materials up to 300 °C. Eu III has been used as structural probe due to its photophysical properties. The PL spectra displays the lines characteristics of the Eu (III) ion ⁵D₀ → ⁷F_J (J = 0, 1, 2, 3 and 4). Wide bands were observed, indicating non-homogeneous sites that are characteristic of amorphous systems.     

Thermal,structure and morphological properties of lithium disilicate glasses doped with copper oxide and their glass–ceramic derivatives

This research aims to investigate and compare the structural and the morphological properties of both lithium disilicate glasses doped with copper oxide and their glass–ceramic derivatives. Density measurements were measured for all samples by Archimedes method at room temperature. Differential scanning calorimetric analysis was used to determine the glass transition temperature (T_g) and crystallization temperature (T_c) for all glasses. The glass transition temperature was observed to decrease with increasing CuO concentration indicating the formation of non-bridging oxygen bonds in the glass network. X-ray analysis patterns reveal the appearance of crystalline lithium metasilicate phase as the main phase within the glass–ceramic derivatives, and their crystallite sizes were observed to decrease as the CuO increased. Experimental infrared absorption data indicate the existence of characteristic vibrational bands due to structural building SiO₄ units in resemblance to the same vibrations observed from traditional crystalline silicates. Scanning electron microscopic investigations show the vitreous nature for lithium disilicate glasses and the distinct crystalline morphological features for the corresponding glass–ceramic derivatives.     

Raman and NMR study of bioactive Na2O–MgO–CaO–P2O5–SiO2 glasses

The results of a structural study combining NMR and Raman spectroscopy of several melt-derived glasses in the system Na₂O–MgO–CaO–P₂O₅–SiO₂ are presented. The Raman spectra show clear changes in the Si–O–Si vibrational modes (related to the bridging oxygen atoms, BO) and also verify the presence of non-bridging oxygen atoms (NBO), also named terminal oxygens. The intensity of the Si–O–NBO stretching mode depends on the cation concentration. It can be concluded from the NMR studies that the MgO-containing samples have orthophosphate units charge-compensated by Ca²⁺ and Mg²⁺. The silicate matrix also contains both types of two-valent cations and consists of Q² and Q¹ units. Similarly, the Na₂O-containing samples contain isolated orthophosphate units in a silicate matrix (Q² and Q³ units), both charge-compensated by mixed cations Ca²⁺ and Na⁺. These experimental data were compared with theoretical parameters given by the Stevels model, which is a suitable tool for understanding bioactive behavior of these glasses. Furthermore, results of the in vitro tests carried out in simulated body fluids are presented and compared with both Raman and NMR structural data.     

Thermal and optical properties of TeO2–ZnO–BaO glasses

We report the results of a systematic study of the thermal and optical properties of a new family of tellurite glasses, TeO₂–ZnO–BaO (TZBa), as a function of the barium oxide mole fraction and compare them with those of TeO₂–ZnO–Na₂O (TZN). The characteristic temperatures of this new glass family (glass transition, T_g, crystallization, T_x, and melting, T_m) increase significantly with BaO content and the glasses are more thermally stable (greater ΔT = T_x ? T_g) than TZN glasses. Relative to these, Raman gain coefficient of the TZBa glasses also increases by approximately 40% as well as the Raman shift from ~ 680 cm^? 1 to ~ 770 cm^? 1. The latter shift is due to the modification of the glass with the creation of non-bridging oxygen ions in the glass network. Raman spectroscopy allows us to monitor the changes in the glass network resulting from the introduction of BaO.     

Dielectric properties,conductivity, UV–visible and infrared spectroscopy of PbO P2O5 NaF glasses containing WO3

Homogeneous (50P₂O₅–(30 ? x)PbO–20NaF–xWO₃ where x = 0.0, 5, 10 and 15 mol%) glasses were synthesized using a melt-quenching method. The short range structures of the phosphate samples were examined by Fourier transform infrared spectroscopy. The infrared spectral studies have pointed out the existence of conventional PO₄, WO₄ and WO₆ structural units in the glass network, the number of WO₄ tetrahedra decreases as WO₃ concentration increases. The optical transmittance and reflectance spectrum of the glasses have been recorded in the wavelength range of 190–1100 nm. The values of the optical band gap E_op for all types of electronic transitions and refractive index have been determined and discussed. The real and imaginary parts ε₁ and ε₂ of the dielectric constant have been determined. The type of electronic transitions in the present glass system is indirectly allowed and the high values for the refractive index and dispersion are recorded due to the high polarizability of tungsten ions. The results of refractive indices as determined reveal the homogeneity of samples and were found to depend on the glass composition. The electrical properties of the glasses were investigated by ac conductivity from 0.12 to 100 kHz for temperatures ranging from room temperature to 600 K. The study of dielectric properties suggested increase in the insulating character of the glass system with increase in the content of WO₃. The ac conductivity in the high temperature region seems to be connected mainly with the polarons involved in the process of transfer from W⁴⁺ to W⁵⁺ ions.     

Investigation into the structure of ceramic Li x Na1−x Ta0.1Nb0.9O3 solid solutions by X-ray analysis and Raman spectroscopy

The structure of ceramic solid solutions Li _x Na_{1 ? x} Ta_0.1Nb_0.9O₃ has been investigated by full-profile X-ray diffraction analysis and Raman spectroscopy. It is shown that their structure for all x values is similar to the NaNbO₃ structure. The structure of NaTa_0.1Nb_0.9O₃ solid solutions (x = 0) is characterized by the sp. gr. Pbcm, and the structure of Li _x Na_{1 ? x} Ta_0.1Nb_0.9O₃ solid solutions with x = 0.05, 0.1, and 0.16 is characterized by the sp. gr. P2₁ ma. The unit-cell parameters decrease with an increase in x. At x = 0, doubled values of the parameter c and, correspondingly, the unit-cell volume are observed in the antiferroelectric phase. This fact is confirmed by the form of the vibrational spectrum in the region of stretching modes of oxygen atoms along the polar axis.     

Study of hyperfine interactions in Fe–Co nanocomposite films by Mössbauer spectroscopy and NMR

Nanogranular magnetic films were produced by the specially designed UHV plasma-jet system with DC hollow-cathode discharge. We investigated the properties of these ferromagnetic FeCo-AlN films. The samples were studied by nuclear magnetic resonance, Mössbauer spectroscopy, and transmission electron microscopy. The films are composed of nanoparticles of cubic FeCo, 2–10 nm in size, embedded in amorphous matrix containing Al, N and O. The Mössbauer spectra indicate that the orientation of local magnetic moments on the surface is random for the sample with 1:1 Fe/Co ratio, while the magnetization lays in the plane of the layer for samples with Fe/Co smaller than 1 (0.91–0.95).     

Electrical and dielectric properties of MnF2–ZnF2–NaPO3 glasses

Direct electrical conductivity and dependencies of complex electrical modulus vs. temperature and frequency have been measured on glasses from the MnF₂–ZnF₂–NaPO₃ system. These glasses are sensitive to atmospheric humidity and as a consequence, the electrical conductivity increases up to temperature of 50 °C. A hydrated layer is created by the effect of water and leads to the significant increase of the electrical conductivity in the case of 0MnF₂–20ZnF₂–80NaPO₃ glass. This behavior is governed by Arrhenius relation where the values of activation energy are increasing and values of the electrical conductivity are decreasing with the amount of MnF₂. Dielectric measurements show that a heterogeneous phase is formed in the bulk of glasses. This may be seen when plotting complex electrical modulus in the complex plane. The records made by the light microscope confirmed the occurrence of the other phase in the bulk of glasses.     

Nanophase separation and effects on properties of Ge–As–Se chalcogenide glasses

Nanophase separation in the bulk Ge–As–Se chalcogenide glasses was observed by SEM and supported by XRD and IR measurements. Effects of nanophase separation on glass transition temperature (T_g), microhardness (H_v), optical band gap (E_opt) and thermal expansion coefficient (α) were investigated in terms of glass rigidity transitions. According to the correlations between the properties and average coordination number Z, it is established that nanophase separation becomes more intensive when Z is larger than 2.64.     

Electrooptical Kerr phenomenon and Raman spectroscopy of one lithium–niobium–silicate glass-forming system

Raman spectra and electrooptical Kerr coefficients of glasses belonging to one lithium–niobate–silicate glass-forming system xNb₂O₅ · (66 ? x)SiO₂ · 19Li₂O · 11K₂O · 2B₂O₃ · 2CdO are studied. It has been found that these glasses demonstrate a record value of electrooptical Kerr coefficient; the glass with x = 35 showed electrooptical Kerr coefficient equal to 266 × 10^?16 m/V². Using Raman spectroscopy combined with the concept of Constant Stoichiometric Groupings, a correlation of electrooptical Kerr coefficients of these glasses with the content of Li₂O · Nb₂O₅ (or 2LiNbO₃) groupings has been demonstrated. The hypothesis that electrooptical Kerr sensitivity of glasses is related to the ordered regions with composition and symmetry corresponding to some of known electrooptical crystals has been verified. These regions, which the authors called ‘Crystal Motifs’, are identified with the groupings found in studying Raman spectra of the glasses.     

Atomic structure and chemical order in binary Ge–Te and As–Te glasses: A Te K-edge X-ray absorption fine structure spectroscopic study

The nearest-neighbor coordination environments of Te atoms in Ge_xTe_100?x glasses with x = 15 and 20 and in As_xTe_100?x glasses with 40 ? x ? 65 have been studied with Te K-edge EXAFS spectroscopy. The average coordination number of Te atoms in all glasses is found to be ～2.0 and no violation of the 8-N rule is observed. The compositional makeup of the first coordination shell of Te atoms indicates that chemical order is largely preserved in both glass-forming binary systems. Sudden changes in the Te coordination environment and violation of chemical order are observed at the stoichiometric As₄₀Te₆₀ glass implying formation of a constrained network. The compositional dependence of the physical properties in both systems can be correlated to short-range chemical order.     

Effect of alumina on the structure and properties of Li2O–B2O3–P2O5 glasses

The structure of glasses within the system Li₂O–Al₂O₃–B₂O₃–P₂O₅ has been studied through ³¹P, ¹¹B and ²⁷Al Nuclear Magnetic Resonance, and the effect of Al₂O₃ substitution by B₂O₃ and P₂O₅ network formers on the structure and properties investigated for a constant Li₂O content. Multinuclear NMR results reveal that substitution of Al₂O₃ for B₂O₃ and P₂O₅ network formers in a glass with composition 50Li₂O·15B₂O₃·35P₂O₅ produces a change in boron environment from four-fold to three-fold coordination. Meanwhile aluminum can be present in four-, five- and six-fold coordinations a higher amount of Al(IV) groups is found for increasing alumina contents. The behavior of the glass transition temperature and electrical conductivity of the glasses has been interpreted as a function of the structural changes induced in the glass network when alumina is substituted for B₂O₃, P₂O₅ or both. Small additions of alumina produce a drastic increase in glass transition temperature, while it does not change for [Al₂O₃] greater than 3 mol.%. However, the electrical conductivity shows very different behavior depending on the type of substitution; it can remain constant when B₂O₃ content decreases or sharply decrease when P₂O₅ is substituted by Al₂O₃, which is attributed to a higher amount of BO₃ and phase separation.     

Optical spectroscopy and local structure of Er3+ luminescence centres in СaO–Ga2O3–GeO2 glasses

Optical absorption, luminescence excitation and emission spectra of Er³⁺ centres in Ca₃Ga₂Ge₃O₁₂:Er glass with Er content of 1.46 wt% are presented and analysed. Luminescence kinetics for the main Er³⁺ transitions was satisfactorily described by single exponential decays with characteristic lifetimes. Oscillator strengths, phenomenological Judd–Ofelt intensity parameters, radiative decay rates (emission probabilities of transitions), branching ratios and radiative lifetimes for Er³⁺ centres in Ca₃Ga₂Ge₃O₁₂:Er glass are calculated and compared with the corresponding parameters of the Ca₃Sc₂Ge₃O₁₂:Er³⁺ garnet and other crystals and glasses. Quantum efficiency, η, of the ⁴I_13/2 → ⁴I_15/2 Er³⁺ transition is determined. Incorporation peculiarities and local structure of Er³⁺ luminescence centres in Ca₃Ga₂Ge₃O₁₂:Er³⁺ glass are discussed in comparison with garnet crystals and oxide glasses. On the basis of the presented results and referenced EXAFS data for Er, Eu and Ho impurities (L₃-edge) it has been shown that Er³⁺ centres in Ca₃Ga₂Ge₃O₁₂ glass occupy network sites with the coordination number to oxygen of N = 6.     

Properties and structure of AsTe glasses: (I). Glass-forming ability and related properties

AsTe glasses have been investigated for determining the molecular mechanisms of glass formation and of crystallization. Stable and homogeneous bulk glasses are prepared throughout the range of concentration from 20 to 65 at % As, by using an improved quenching method. GFA (glass-forming ability) is determined with respect to the rate of cooling. Density, microhardness, T_g and ΔC_p at T_g are measured in the whole range of glass formation. Finally a quantitative analysis of the kinetics of crystallization is carried out. It appears that most properties which involve molecular motions exhibit anomalies for As₄₀ Te₆₀ composition (As₂Te₃ is the unique definite compound of the system). So GFA shows a sharp depression for this critical composition; similarly enthalpy and kinetics of crystallization are drastically modified at As₄₀Te₆₀. For Te-rich glasses, crystallization occurs at low temperature by homogeneous nucleation with a small energy of activation. For As-rich glasses, crystallization occurs at much higher temperatures. Above 200°C it is controlled by growth with an high activation energy which indicates deep rearrangements of the relative positions of the atoms by chemical diffusion. A coherent analysis of all the data is developed which shows that important differences of local order exist between amorphous and crystalline states and also between the two well-distinct types of glasses we are dealing with. The aim of paper II is to determine these differences from diffraction data.