Determination of mechanical, electrical and thermal properties of the Sn―Bi―Zn ternary alloy

The development of lead-free solders has emerged as one of the key issues in the electronics packaging industries. Sn―Zn―Bi eutectic alloy has been considered as one of the lead-free solder materials that can replace the toxic Pb―Sn eutectic solder without increasing soldering temperature. This study investigates the effect of temperature gradient and growth rate on the mechanical, electrical and thermal properties of the Sn―Zn―Bi eutectic alloy. Sn-23 wt.% Bi-5 wt.% Zn alloy was directionally solidified upward with different growth rates (V = 8.3-478.6 μm/s) at a constant temperature gradient (G = 3.99 K/mm) and with different temperature gradients (G = 1.78-3.99 K/mm) at a constant growth rate (V = 8.3 μm/s) in the Bridgman-type growth apparatus. The microhardness (HV), tensile stress (σ_t) and compressive stress (σ_c) were measured from directionally solidified samples. The dependency of the HV, σ_t and σ_c for directionally solidified Sn-23 wt.% Bi-5 wt.% Zn alloy on the solidification parameters (G, V) were investigated and the relationships between them were obtained by using regression analysis. According to present results, HV, σ_t and σ_c of directionally solidified Sn-23 wt.% Bi-5 wt.% Zn alloy increase with increasing G and V. Variations of electrical resistivity (ρ) for cast samples with the temperature in the range of 300-420 K were also measured by using a standard dc four-point probe technique. The enthalpy of fusion (ΔH) and specific heat (C_p) for same alloy was also determined by means of differential scanning calorimeter (DSC) from heating trace during the transformation from eutectic liquid to eutectic solid.     

Glass formation and structure of glasses in the ZnO―Bi2O3―WO3―MoO3 system

The glass formation region in the ternary ZnO―Bi₂O₃―WO₃ system is determined by melt quenching technique (cooling rates 10¹-10² K/s). New original glasses are obtained in a narrow concentration range with high WO₃ content (60-75 mol%). Homogeneous glasses of the composition (100 − x)[0.2ZnO·0.3Bi₂O₃·0.5WO₃]xMoO₃, were obtained between 20 and 60 mol% MoO₃. Characterization of the amorphous samples was made by x-ray diffraction (XRD), differential thermal analysis (DTA) and infrared spectroscopy (IR). The thermal stability of glasses decreases with the increasing of MoO₃ content. The glass transition temperature, T_g, varies between 340-480 °C, while the crystallization temperature, T_x, varies between 388-531 °C. The tungstate glasses possess higher crystallization temperature (T_x over 500 °C) in comparison with the other vanadate and molybdate non-traditional glasses. The glass network is realized by transformation of three-dimensional structure of WO₃ into a layered one, consisting mainly of WO₆ units. We supposed that the network of quaternary glasses is built up by MoO₄, MoO₆ and WO₆. At low concentration ZnO and Bi₂O₃ facilitate the disorder in the supercooled melts, while at high concentration stimulate crystallization processes. These oxides belong to the intermediate ones.     

Surface kinetics of nitrogen dissolution and its correlation to the slag structure in the CaO―SiO2, CaO―Al2O3, and CaO―SiO2―Al2O3 slag system

The kinetics of nitrogen dissolution into molten slag at 1873 K was investigated by an isotope exchange technique. Rate constants were correlated with the molten slag structure obtained from FT-IR spectra. The rate constant in the CaO―SiO₂ binary system showed a maximum value at a specific slag composition followed by a decrease in the rate due to excess O²⁻ blocking the surface sites for nitrogen adsorption. The rate constant in the CaO―Al₂O₃ binary system was comparatively constant within the experimental range of 45 mass% to 60 mass%. The rate constant in the CaO―SiO₂―Al₂O₃ ternary slag system was measured within the boundary of the liquidus line and showed a close correlation with the slag structure. Furthermore, the rate constant in the CaO―SiO₂―Al₂O₃ ternary system was found to be significantly higher compared to the binary system due to the correlated effect of lower binding energies of the Al―O bonds and the increased number of reaction sites available when smaller Si―O tetrahedral were simultaneously present with Al―O bonds.     

Luminescence properties of Tb3+/Sm3+ co-doped 38B2O3―31Al2O3―31SrO glasses and glass ceramics

In this paper, Tb³⁺/Sm³⁺ co-doped 38B₂O₃―31Al₂O₃―31SrO glass was successfully prepared. After heat treatment, single crystal phase SrAl₂B₂O₇ was precipitated from the parent glass. DTA data showed the glass transition temperature at 625 °C and a sharp exothermic peak at 860 °C. XRD patterns demonstrated a regular evolution from glass to glass ceramics with higher treatment temperature and longer treatment time. From the XRD patterns, we supposed that Tb³⁺/Sm³⁺ ions can be most likely contained in the crystal phase. The photoluminescence spectra showed that the crystallization can enhance the emission intensity significantly and there could be an optimum crystallization degree to get the strongest luminescence in glass ceramics. The light scattering of devitrification sample can vary the intensity ratio of Sm³⁺ and Tb³⁺ emission. Therefore, as a potential route, rare earth ions doped glass ceramics could be a further research direction of luminescence glasses for white light emitting diodes application.     

Glass formation and structure of glasses in B2O3―Bi2O3―MoO3 system

The purpose of this paper is to study the glass formation tendency in the ternary system B₂O₃―Bi₂O₃―MoO₃ and to define the main structural units building the amorphous network. A wide glass formation area was determined which is situated near the Bi₂O₃―B₂O₃ side. A liquid phase separation region was observed near the MoO₃―B₂O₃ side for compositions containing below 25 mol% Bi₂O₃ and their microheterogeneous structure was observed by SEM. The phase formation was characterized by X-ray diffraction (XRD). By DTA was established the glass transition temperature (T_g) in the range of 380-420 °C and crystallization temperature (T_x) vary between 420 and 540 °C. The main building units forming the amorphous network are BO₃ (1270 and 1200 cm^− 1), BO₄ (930-880, 1050-1040 cm^− 1), MoO₄ (840-760 cm^− 1) and BiO₆ (470 cm^− 1). It was proved that Bi₂O₃ favors the BO₃ → BO₄ transformations while MoO₃ preserves BO₃ units in the amorphous network.