Synthesis and nonlinear optical properties of methacrylate polymers based on 2‐[4‐(N‐methyl,N‐hydroxyethylamino)phenylazo]‐phenyl‐6‐nitrobenzoxazole chromophore

Methacrylate polymers containing different molar contents of nonlinear optical (NLO) active molecular segments based on 2‐[4‐(N‐methyl,N‐hydroxyethylamino)phenylazo]‐phenyl‐6‐nitrobenzoxazole chromophores were synthesized, and their phase behavior and second‐order NLO properties were investigated. Polymers containing 6–17 mol % chromophore segments allowed the preparation of amorphous and optically clear thin films. Some mesomorphic structuration was exhibited by a polymer with 33 mol % chromophoric units. However, this feature did not prevent the possibility of investigating the NLO properties. Nonlinear resonance‐enhanced d₃₃ coefficients were determined by second harmonic generation experiments on spin‐coated, corona‐poled thin films at λ = 1064 nm. Values ranging from 40 to 60 pm/V were measured with increasing chromophore molar contents. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1841–1847, 2003     

Synthesis and properties of novel polyurethanes containing 3,4‐dioxybenzylidenecyanoacetate group as a nonlinear optical chromophore

Methyl 3,4‐di‐(2′‐hydroxyethoxy)benzylidenecyanoacetate ( 3 ) was prepared by hydrolysis of methyl 3,4‐di‐(2′‐vinyloxyethoxy)benzylidenecyanoacetate ( 2 ). Diol 3 was condensed with 2,4‐toluenediisocyanate, 3,3′‐dimethoxy‐4,4′‐biphenylenediisocyanate, and 1,6‐hexamethylenediisocyanate to yield polyurethanes 4 – 6 containing the nonlinear optical chromophore 3,4‐dioxybenzylidenecyanoacetate. The resulting polyurethanes 4 – 6 were soluble in common organic solvents such as acetone and dimethylformamide. Polymers 4 – 6 indicated thermal stability up to 300 °C in thermogravimetric thermograms with glass‐transition temperature values obtained from differential scanning calorimetric thermograms in the range of 78–102 °C. The second‐harmonic generation coefficients (d₃₃) of the poled polymer films were around 6.9 × 10^?9 esu. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1742–1748, 2002     

Synthesis of nonlinear optical polyimides containing azodiamine derivative chromophores and their electrooptic and thermal properties

Some thermally stable second‐order nonlinear optical (NLO) polyimides were synthesized. The polyimides were prepared by the ring‐opening polyaddition of 4,4′‐(hexafluoroisopropylidene) diphthalic anhydride and pyromellitic dianhydride with two aromatic azodiamine derivatives as the NLO chromophores. These chromophores, based on a nitro group connected with azobenzene as the acceptor end of a donor–π‐bridge–acceptor chromophore and a diamine group as the donor end, had specific chemical stability. On the basis of ZERNER'S INDO methods, according to the sum‐over‐states formula, a program for the calculation of nonlinear second‐order optical susceptibilities was devised. The resulting polyimides had high number‐average and weight‐average molecular weights of up to 26,000 and 53,500, respectively, and a large glass‐transition temperature of 248 °C. With an in situ poling and temperature ramping technique, the optimal temperatures (T_opt's) for corona poling were obtained for the largest second‐order NLO response. The electrooptic coefficient (γ₃₃) of a polyimide at a wavelength of 830 nm was up to 21 pm/V after corona poling under its T_opt, and the value remained at elevated temperatures (>90.6% was retained at 240 °C for >120 h). The thermal stability of the NLO polyimides was studied with UV spectrometry after poling of the films. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2478–2486, 2002     

Molecular probe techniques for studying diffusion and relaxation in thin and ultrathin polymer films

Two optically based, molecular probe techniques are employed to study relaxation and small-molecule translational diffusion in thin and ultrathin (thicknesses < ∼200 nm) polymer films. Second harmonic generation (SHG) is used to study the reorientational dynamics of a nonlinear optical chromophore, Disperse Red 1 (DR1) (previously shown to be an effective probe of α-relaxation dynamics) either covalently attached or freely doped in polymer films. Our studies on films ranging in thickness from 7 nm to 1 μm show little change in T_g with film thickness; however, a substantial broadening of the relaxation distribution is observed as film thickness decreases below approximately 150 nm. Experimental guidelines are given for using fluorescence nonradiative energy transfer (NRET) to study translational diffusion in ultrathin polymer films. Appropriate choice of a fluorescence donor species is important along with ensuring that diffusion is slow enough to be measured appropriately. Initial results on the diffusion of a small-molecule probe, lophine, in poly(isobutyl methacrylate) indicates that there is little change in probe diffusion coefficients in films as thin as 90 nm as compared to bulk films. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2795–2802, 1997     

Poly(vinyl alcohol)/heteropolyacid nanocomposites as new materials for radiochromic dosimetry in radiation processing

Radiochromic films composed of polymer matrices and organic dyes are widely used for routine dosimetry purposes in operation of various radiation facilities—gamma and X-ray-irradiation, electron accelerators, and so on. However, the sensitivity of these films rapidly decreases at doses exceeding 30–50 kGy due to a saturation of their optical response, making them unsuitable for accurate dosimetry in radiation processing of polymers and composites where doses up to 200 kGy are typically employed. To overcome this limitation, the use of inorganic substances as the coloring agents of polymer-based radiochromic films was proposed in this paper, specifically, heteropolyacidacid H₃PW₁₂O₄₀ (tungstophosphoric acid) in the matrix of poly(vinyl alcohol) (PVA). Nanocomposite PVA/H₃PW₁₂O₄₀ films were prepared by solution casting and their optical responses toward ⁶⁰Co gamma radiation and beams of 6 MeV electrons for a dose range of 10–200 kGy were investigated. It was established that upon exposure to gamma rays and electron beams, the films turn blue and a broad absorption band at 750 nm appears in their spectra. Importantly, the radiation-induced optical absorption increases in a linear fashion up to the dose of 150 kGy and only slightly deviates from linearity at 200 kGy. Moreover, it was found that the PVA/H₃PW₁₂O₄₀ films have a long shelf life, are dose-rate independent within a wide range, and color-stable after irradiation. All these features make the nanocomposite PVA/H₃PW₁₂O₄₀ films promising for use as routine dosimeters and dose labels in a much wider range of high doses as compared to radiochromic films based on organic dyes.     

NONLINEAR OPTICAL PROPERTIES OF A-SHAPED NITROPYRIMIDINE DERIVATIVES AND ITS POLYMERIC FILMS

Three A-shaped nitropyrimidine derivatives with benzyl or furfuryl as bridge havebeen synthesized. They possess shorter absorption wavelengths (λ_(cut-off))<400 nm) andhigher βμ values (around 10~(-46) esu). The second order nonlinear optical coefficient d_(33) ofpoled BNPMOPMDA/PMMA doped film is 1.2-2.0×10~(-9) esu obtained by in-situ SHGmeasurements. It can be expected that the chromophore-functionalized polymer containinghigher number density of synthesized chromophore as side chain will be the potential blue-light transparent frequency doubling materials.     

Design and synthesis of a thermally stable second‐order nonlinear optical chromophore and its poled polymers

A multiple charge‐transfer second‐order nonlinear optical (NLO) chromophore 2,3‐bis(4‐aminophenyl)‐5,6‐dicyanopyrazine (BAPDCP) was successfully designed and synthesized. It was characterized by ¹H NMR, mass spectrometry, Fourier transform infrared spectroscopy, and elemental analysis. The first hyperpolarizability β of BAPDCP was measured with the Hyper–Rayleigh scattering technique, which was 123.5 × 10^?30 esu. The donor‐embedded prepolyimide and prepolyurea were also synthesized by a polyaddition reaction. Thermogravimetric analysis and differential scanning calorimetry demonstrated that either the chromophore or the polymers have fine thermal stability. The thin films of prepolymers were prepared by coating on ITO glass substrate and poled by corona poling at elevating temperature. The second‐order NLO coefficients d₃₃ of the films were measured by in situ second‐harmonic generation measurements. The d₃₃ were deduced as 27.7 and 16.5 pm/V for polyurea and polyimide at 1064 nm fundamental wavelength, respectively. The onset depoling temperature of the polyimide and polyurea were both as high as 200 °C. To understand the temperature effect to the orientation thermal stability of polyimide, two films were treated at different final poling temperatures. The depoling experimental results showed that the orientation stability is higher, as raising the final treated temperature but the d₃₃ value are almost similar. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2846–2853, 2003     

Synthesis of nonlinear optical polymers with large photoconductive sensitivity and transparency

Novel nonlinear optical (NLO) chromophore, 2-{3-[2-(4-methylsulfonylphenyl)vinyl]carbazol-9-yl}ethanol was synthesized and subsequently reacted with methacryloyl chloride to give a photoconducting NLO monomer ( M1 ). 2-Methylacrylic acid 2-[3-(diphenylhydrazonomethyl)carbazol-9-yl]ethyl ester ( M2 ) was also synthesized as a comonomer to enhance the carrier mobility of the NLO polymer. Photoconducting NLO polymers, P1 and P2 were obtained by the copolymerization of Ml with methyl methacrylate and M2 , respectively. These polymers were well soluble in organic solvents and showed glass transition at 177 °C and 196 °C, respectively. Polymer films of P1 and P2 were optically clear, and were transparent at wavelengths longer than 420 nm. The electro-optic coefficient (r₃₃) of poled P1 films was measured to be ∼5 pm/V at 632.8 nm. The photoconductive sensitivities of P1 and P2 were 6.2 × 10⁻¹⁴ S·cm⁻¹/mW·cm⁻² and 5.6 × 10⁻¹¹ S·cm⁻¹/mW·cm⁻².     

Synthesis and characterization of NLO chromophores bearing poly(1,6-heptadiyne)s for electro-optic application

We utilized the metathesis reaction to synthesize a new type of multifunctional polymer that contains a conjugated backbone and a second-order NLO chromophore as a pendant group. The 1,6-heptadiyne derivatives bearing NLO chromophores were easily polymerized by using a metathesis catalyst to give corresponding polymers with large optical nonlinearities. Molecular structural characterizations for the resulting polymers were achieved by ¹H- and ¹³C-NMR, FTIR, and UV-visible spectroscopies. Soluble polymers were obtained up to 72 mol % of chromophore monomer portion in the copolymer. These amorphous polymers exhibited good film-forming abilities and thermal stability. The electro-optic coefficient, r₃₃, of the poled polymer films was in the range of 0.5–10.1 pm/V, and the nonresonant values of the third-order NLO coefficient, χ⁽³⁾ was found to be about 10⁻¹¹ esu. © 1996 John Wiley & Sons, Inc.     

Preparation and nonlinear optical properties of Au nanoparticles doped TiO2 thin films

Nano-sized noble metal nanoparticles doped dielectric composite films with large third-order nonlinear susceptibility due to the confinement and the enhancement of local field were considered to be applied for optical information processing devices, such as optical switch or all optical logical gates. In this paper, sol–gel titania thin films doped with gold nanoparticles (AuNPs, ~10 nm in average size) were prepared. AuNPs were firstly synthesized from HAuCl₄ in aqueous solution at ~60 °C, using trisodium citrate as the reducing agent, polyvinylpyrrolidone as the stable agent; then the particle size and optical absorption spectra of the AuNPs in aqueous solutions were characterized by transmitting electron microscopy and UV–Vis–NIR spectrometry. Sol–gel 2AuNPs–100TiO₂ (in %mol) thin films (5 layers, ~1 μm in thickness) were deposited on silica glass slides by multilayer dip-coating. After heat-treated at 300–1,000 °C in air, the AuNPs–TiO₂ thin films were investigated by X-ray diffraction, scanning electron microscopy and atomic force microscopy. The nonlinear optical properties of the AuNPs–TiO₂ thin films were measured with the Z-scan technique, using a femtosecond laser (200 fs) at the wavelength of 800 nm. The third-order nonlinear refractive index and nonlinear absorption coefficient of 2AuNPs–100TiO₂ films were at the order of 10^?12 cm²/W, and the order of 10^?6 cm/W, respectively, and the third-order optical nonlinear susceptibility χ⁽³⁾ was ~6.88 × 10^?10 esu.     

Quadratic nonlinear optical and preliminary piezoelectric investigation of crosslinked samples obtained from a liquid chromophore

A push–pull chromophore has been synthesized, which is liquid at room temperature and can be crosslinked owing to the presence of two methacrylate moieties. Thin films of the chromophore have been prepared by spin coating, and they have been simultaneously crosslinked and poled under strong electric field. On the poled crosslinked films, the quadratic nonlinear optical (NLO) characterization was performed through nonresonant second harmonic generation measurements at 1368 nm as the fundamental wavelength, yielding a fairly good d₃₃ value of 46 pm/V, with retention of 80% of that value after 2 months at 85 °C. Following the theoretical issue that the quadratic NLO and piezoelectric tensors of a material have the same symmetry properties, and exploiting the easy processing of the chromophore in the liquid phase, we have prepared poled crosslinked samples of the chromophore suitable for piezoelectric tests that were performed using a commercial piezoceramic sample as the reference. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Large electro‐optic activity and enhanced temporal stability of methacrylate‐based crosslinking hyperbranched nonlinear optical polymer

A methacrylate‐based crosslinking hyperbranced polymers have been synthesized through initiator‐fragment incorporation radical polymerization and used for the temperature stable electro‐optic (EO) polymer application. This polymer consists of methyl methacrylate, 2‐metacryloxyethyl isocyanate, and ethylene glycol dimethacrylate (EGDMA) monomers. The use of EGDMA as a bifunctional unit resulted in the solvent‐soluble crosslinking hyperbranched chain, so that the EO polymer enhanced glass transition temperatures. A phenyl vinylene thiophene vinylene bridge nonlinear optical chromophore was attached to the polymer backbone as the side‐chain by a post‐functionalization reaction. The loading concentration of the chromophore was varied between 30 and 50 wt % by simply changing the mixing ratio of the precursor polymer to the chromophore. The synthesized EO polymers produced optical quality films with a light propagation loss of 0.61 dB/cm in a slab waveguide at 1.31 μm. The electrically poled film had an EO coefficient (r₃₃) of 139 pm/V at 1.31 μm. The EO crosslinking hyperbranced polymer had a high‐glass transition temperature of 170 °C, and exhibited excellent temporal stability of the EO activity at 85 °C for 500 h. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of nonlinear optical chromophore and the preparation of attenuated total reflectance modulator

A new nonlinear optical chromophore with strong electron‐withdrawing acceptor and rigid–flexible dendron was synthesized. An electro‐optic (EO) attenuated total reflectance modulator was prepared to measure the EO coefficient of the films. Modification of the tricyanopyrroline chromophore with rigid–flexible dendron group provided reduction of dipole–dipole interactions and improvement of its solubility. As the chromophore loading increased, there was a great improvement on the macroscopic EO response of the polymeric materials obtained by incorporating this chromophore as a guest in amorphous polycarbonate. The largest EO coefficient was 42 pm/V at 1310 nm. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis and characterization of a novel nonlinear optical hyperbranched polymer containing a highly performing chromophore

We report herein the peripheral functionalization of a high glass transition temperature hyperbranched polyimide with a new and highly performing electro‐optic chromophore for the elaboration of a second‐order nonlinear optical material. In this study, the CPO1 chromophore was selected for its very high quadratic hyperpolarizability coefficient (μβ = 31,000 ? 10^?48 esu at 1990 nm) and its ease of synthesis in multigram scale. As a result, the new electro‐optic polymer was characterized by an r₃₃ coefficient around 40 pm/V at 1.5 µm, although the poling conditions were not optimized. For sake of comparison, the electro‐optic r₃₃ coefficient of our previously reported similar polymer functionalized with the well‐known Disperse Red One chromophore was also measured using the technique and gave a much lower r₃₃ coefficient. This study underscores that hyperbranched polymers are particularly promising matrices to host highly efficient chromophore to achieve more efficient and more stable electro‐optic devices than classical linear polymers. Copyright © 2013 John Wiley & Sons, Ltd.     

Polymer thin film properties as a function of temperature and pressure

We report on evanescent wave optical measurements of the glass transition temperature, T_g, of spin-cast PMMA films as a function of film thickness and molecular weight. It was found that for films of high molecular weight PMMA (M_n > 100,000 g mol⁻¹) a strong T_g depression occurs for films that are thinner than 100 nm in case they are deposited on hydrophobic substrates. This strong T_g depression of up to 25°C decreases if similarly thick films of PMMA of low molecular weights are investigated and vanishes completely for PMMA with M_n < 12,000 g mol⁻¹. For films made of these materials T_g is found to be identical to that of the bulk even for films as thin as 5 nm. The results might be interpreted in terms of free volume considerations. To check this assumption we also designed and built a pressure cell that can be used together with the evanscent wave optical techniques for similar measurement, but with the additional option to do the measurements at different pressures up to ca. 100 MPa to further vary the free volume of these polymer films in constrained geometry. Some first results obtained with this setup are also described.     

Trianionic 1,3,2-Dioxaborine-Containing Polymethines: Bright Near-Infrared Fluorophores

Trianionic polymethines of the A′-π-A-π-A-π-A′ type comprising dioxaborine rings (A) and different electron-accepting end groups (A′) have been synthesized. The obtained dyes absorb and emit light in the near-infrared region with remarkably high molar attenuation coefficients (ϵ up to 495 000 M⁻¹ cm⁻¹ in DMF) and fluorescence quantum yields (Φ_f up to 0.73 in DMF). Thus, the novel trianionic dyes stand among the brightest individual fluorophores known to date – with a magnitude of fluorescence brightness (ϵ⋅Φ_f) of 313 000 M⁻¹ cm⁻¹ in DMF. The synthesized dyes demonstrate a minor negative solvatochromism and small Stokes shifts. X-ray data reveal the nearly planar geometry of the trianionic chromophore. All the obtained compounds are stable in the solid state and in a solution, although the relative stability is much higher in polar aprotic than in protic solvents.     

Synthesis and characterization of NLO chromophore with benzo [1,2-b:4,5-b′]dithiophene unit as π-electron bridge

A novel chromophore BDT–TCF with benzo[1,2-b:4,5-b′]dithiophene (BDT) unit as electron bridge was synthesized and characterized by UV–vis, NMR spectroscopy, and thermal analysis. It is the first time that BDT unit was introduced into NLO materials. The chromophore showed excellent solubility in most common solvents, and good thermal stability for practical applications. The second order nonlinear optical effect was measured by hyper Rayleigh scattering method. The diagonal hyperpolarizability β_zzz of BDT–TCF was 8.2 × 10^?28 and 9.3 × 10^?29 esu in THF solvent and in PMMA polymer matrices, respectively. The potential NLO response indicates that BDT unit is a promising π-electron bridge and an excellent candidate for nonlinear optical devices.     

Second-Order Nonlinear Optical Properties of a Polymer Exhibiting Optical Transparency Down to 340 nm

Abstract

The synthesis and characterization of an epoxy-based nonlinear optical (NLO) polymer exhibiting optical transparency down to 340 nm is reported. The synthesized polymers show spectroscopic properties (NMR, IR, UV) in accordance with the proposed structures. A glass transition temperature (T_g) of 92°C and a thermal degradation temperature (T_d) of 322°C were recorded. The poled polymer film exhibits stable second-order nonlinear optical activity (d₃₃ = 4.2 pm/V) over a period of 800 hours as characterized by the temporal response of the second harmonic signal at room temperature.     

Linear‐dendritic block copolymer hosts for the encapsulation of electro‐optic chromophores via H‐Bonding

Linear‐dendritic block copolymer hosts were synthesized by end‐functionalizing poly(methylmethacrylate) with dendrons that acted as hydrogen‐bonding acceptors for nonlinear optical chromophores. Second harmonic generation experiments indicate that the d₃₃ coefficients and maximum chromophore loading are increased in linear‐dendritic block copolymer hosts over comparable homopolymer hosts. Transmission electron microscopy shows 5–10 nm chromophore domains, confirming the effective spatial dispersion of the chromophores. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5017–5026, 2009     

Preparation of stable second‐order nonlinear optical films by sol–gel technique

A stable nonlinear optical (NLO) film containing “T” type alkoxysilane dye was prepared by sol–gel technology. This crosslinked “T” type alkoxysilane dye was synthesized and fully characterized by FTIR, UV–Vis spectra, and ¹H‐NMR. Followed by hydrolysis and copolymerization processes of the alkoxysilane with γ‐glycidoxypropyl trimethoxysilane (KH560) and tetraethoxysilane (TEOS), high quality inorganic–organic hybrid second‐order NLO films were obtained by spin coating. The “T” type structure of the alkoxysilane was found to be effective for improving the temporal stability of the optical nonlinearity due to the reduction in the relaxation of the chromophore in the film materials. Copyright © 2009 John Wiley & Sons, Ltd.