Structural studies of ThO2 containing barium borosilicate glasses

Barium borosilicate glasses containing as much as 18.6 wt% ThO₂ have been prepared by a conventional melt–quench method and characterized by ²⁹Si and ¹¹B magic angle spinning nuclear magnetic resonance (MAS NMR), Infrared (IR) absorption and differential thermal analysis (DTA) techniques for their structural features. Based on ²⁹Si and ¹¹B MAS NMR and IR investigations, it has been established that the borosilicate network is not affected by such a large ThO₂ incorporation. Whereas Si exists as Q³ and Q² structural units in the ratio of ∼0.7, boron exists in both trigonal (BO₃) and tetrahedral (BO₄) configurations and their relative concentrations are not affected by ThO₂ incorporation in these glasses. The higher extent of ThO₂ incorporation in barium borosilicate glasses compared to borosilicate glasses has been attributed to the increased number of non-bridging oxygen atoms present in the barium borosilicate glasses. Based on DTA measurements it has been shown that there is neither any change in the glass transition temperature nor the occurrence of any crystallization up to 1000 °C, for ThO₂ incorporation up to 18.6 wt% in these glasses. For higher concentrations of ThO₂, there is phase separation during glass formation and fine crystallites of ThO₂ are formed as revealed by XRD. These findings are of significance for the nuclear waste management related to thorium fuel cycle.     

Effect of B2O3 addition on the thermal properties and density of barium phosphate glasses

Variations in glass transition temperature, onset of crystallization, thermal expansion coefficient, density and molar volume with B₂O₃ concentration were studied in a series of xB₂O₃–(100 − x)Ba(PO₃)₂ glasses with 0–10 mol% B₂O₃. DTA analysis and isothermal treatments for powdered glass samples reveal that ⩾7.5 mol% B₂O₃ addition suppresses surface crystallization during softening process. Raman spectroscopy suggests that the properties are related to the glass structure consisting of PO₄ Q² units with diborate and PO₄–BO₄ groups.     

Effect of BaO addition on the structural aspects and thermophysical properties of sodium borosilicate glasses

Sodium borosilicate glasses containing different amounts of BaO were prepared by a conventional melt quench method and characterized for their structural aspects by ²⁹Si, ¹¹B NMR and IR spectroscopy. From ²⁹Si MAS NMR studies, it has been inferred that these glasses consist of Q² and Q³ structural units of silicon and that the addition of BaO results in the marginal conversion of Q³ to Q² structural units. There is no direct interaction between Ba²⁺ ions and boron structural units, as revealed by the identical values of the relative concentration of BO₃ and BO₄ structural units and quadrupolar coupling constant values for the BO₃ structural units. The identical values of glass transition temperature and vibrational frequencies corresponding to Si–O–Si/Si–O–B and B–O linkages of all the samples further support this. As the borosilicate network is unaffected, the systematic increase in the values of thermal expansion coefficient with increase in BaO content has been attributed to the increase in the relative concentration of less rigid Ba–O linkages compared to the more rigid Si–O and B–O linkages in the glass. Such studies will be useful for the development of matrices for the management of nuclear waste generated during the reprocessing of the spent fuel from thoria based reactors.     

Structural characteristic of Na2OP2O5GeO2 glass systems

Phosphate glasses based on xNa₂O0.5P₂O₅(0.5−x)GeO₂ (0.0 ⩽ x ⩽ 0.5) mol%, were prepared and their structures were characterized by magic angle spinning (MAS) nuclear magnetic resonance (NMR), Raman and IR spectroscopy techniques. It was found that the phosphate network of these glasses is composed of middle (Q²) and branching (Q³) phosphate tetrahedra, whereas germanium part in the network is composed of three- or four-membered GeO₄ tetrahedral rings. It was also found that the germanium tetrahedral are randomly connected to either Q² or Q³ phosphate units in the network. The glass network, especially the Q² units can be modified by the presence of Na ions. This modification is primarily associated with the phosphate. It is found that these glasses behave as if they are formed from a solution of GeO₂ and sodium–phosphate glass with various GeO₄ units and the Q² and Q³ phosphate units randomly distributed in the network.     

Composition and structure dependence of the properties of lithium borophosphate glasses showing boron anomaly

This work presents a study on the structure, microstructure and properties of 50Li₂O·xB₂O₃·(50 ? x)P₂O₅ glasses. The structure has been studied through NMR spectroscopy and the microstructure by TEM. The properties of the glasses are discussed according to their structure and microstructural features. The introduction of boron produces new linkages between phosphate chains through P–O–B bonds, whose amount increases with boron incorporation; at the same time, a depolymerisation of the phosphate chains into Q¹-type phosphate units takes place. The introduction of boron produces an increase in T_g together with a decrease in the molar volume. The room temperature electrical conductivity increases with boron content as well. However, B₂O₃ contents higher than 20 mol% lead to crystallisation of lithium orthophosphate which contributed to hinder ionic conduction of the glasses.     

Effects of modifier additions on the thermal properties,chemical durability,oxidation state and structure of iron phosphate glasses

Modified iron phosphate glasses have been prepared with nominal molar compositions [(1?x)·(0.6P₂O₅–0.4Fe₂O₃)]·xR_ySO₄, where x = 0–0.5 in increments of 0.1 and R = Li, Na, K, Mg, Ca, Ba, or Pb and y = 1 or 2. In most cases the vast majority or all of the sulfate volatalizes and quarternary P₂O₅–Fe₂O₃–FeO–R_yO_z glasses or partially crystalline materials are formed. Here we have characterized the structure, thermal properties, chemical durability and redox state of these materials. Raman spectroscopy indicates that increasing modifier oxide additions result in depolymerization of the phosphate network such that the average value of i, the number of bridging oxygens per –(PO₄)– tetrahedron, and expressed as Qⁱ, decreases. Differences have been observed between the structural effects of different modifier types but these are secondary to the amount of modifier added. Alkali additions have little effect on density; slightly increasing T_g and T_d; increasing α and T_liq; and promoting bulk crystallization at temperatures of 600–700 °C. Additions of divalent cations increase density, α, T_g, T_d, T_liq and promote bulk crystallization at temperatures of 700–800 °C. Overall the addition of divalent cations has a less deleterious effect on glass stability than alkali additions. ⁵⁷Fe Mössbauer spectroscopy confirms that iron is present as Fe²⁺ and Fe³⁺ ions which primarily occupy distorted octahedral sites. This is consistent with accepted structural models for iron phosphate glasses. The iron redox ratio, Fe²⁺/ΣFe, has a value of 0.13–0.29 for the glasses studied. The base glass exhibits a very low aqueous leach rate when measured by Product Consistency Test B, a standard durability test for nuclear waste glasses. The addition of high quantities of alkali oxide (30–40 mol% R₂O) to the base glass increases leach rates, but only to levels comparable with those measured for a commercial soda-lime-silica glass and for a surrogate nuclear waste-loaded borosilicate glass. Divalent cation additions decrease aqueous leach rates and large additions (30–50 mol% RO) provide exceptionally low leach rates that are 2–3 orders of magnitude lower than have been measured for the surrogate waste-loaded borosilicate glass. The P₂O₅–Fe₂O₃–FeO–BaO glasses reported here show particular promise as they are ultra-durable, thermally stable, low-melting glasses with a large glass-forming compositional range.     

Silver valence and local environments in borosilicate and calcium aluminoborate waste glasses as determined from X-ray absorption spectroscopy

Silver K-edge X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) data were collected and analyzed to characterize silver (Ag) environments in borosilicate and Ca-aluminoborate glass formulations developed as potential candidates for the immobilization of certain nuclear wastes. Silver is found in some nuclear waste streams and must be encapsulated in glass during waste vitrification processes. A related concern deals with phase separation within these glasses and whether colloidal silver would be present in the glass melt, which could present processing issues, or in the waste glass product. Characterization of the silver environments provides useful information for optimizing the silver incorporation ability of such glasses. Data were also gathered on four crystalline standards: Ag-foil, Ag₂O, argentojarosite (AgFe₃(SO₄)₂(OH)₆), and AgO. XANES data indicate Ag⁺ as the dominant species in the glasses. XANES and EXAFS data show that the average Ag environment in the Ca-aluminoborate glass is different compared with those in the two borosilicate glasses investigated. EXAFS analyses show that Ag in the borosilicate glasses is coordinated by two oxygens in a similar environment to that in crystalline Ag₂O, except that the associated Ag–O distances are approximately 0.10 Å longer in the glass. Silver in the Ca-aluminoborate glass may be within one highly disordered site, or possibly, several different sites, where the average Ag–O distance, coordination number, and Debye–Waller factor are larger than those determined for the borosilicate glasses. Despite their relatively high silver contents, there is no evidence from XANES or EXAFS of colloidal silver in the glasses investigated.     

Effect of neodymium oxide on the solubility of MoO3 in an aluminoborosilicate glass

High molybdenum and rare earth concentrations in soda-lime aluminoborosilicate glasses may lead to the crystallization of molybdenum-rich phases such as alkali and alkaline-earth molybdates (Na₂MoO₄, CaMoO₄) and also rare earth (RE)-rich phases such as apatite (Ca₂RE₈(SiO₄)₆O₂) during melt cooling that must be controlled particularly during the preparation of highly radioactive nuclear glassy wasteforms. To understand the effect of neodymium addition (from 0 to 16 wt.% Nd₂O₃) on the phase separation and the crystallization tendency of molydbate phases and on the structure of a Mo-bearing nuclear glass belonging to the SiO₂-B₂O₃-Al₂O₃-Na₂O-CaO-MoO₃ system, crystallization and structural studies have been performed by X-ray diffraction, scanning electron microscopy, electron microprobe analysis, Raman and optical absorption spectroscopies. The results obtained show that the addition of an increasing amount of Nd₂O₃ induces a significant increase of the solubility of molybdenum in the glass, characterized by a decrease of the phase separation and of the crystallization tendency of molybdate phases. The increase of chemical disorder in the structure of Mo-bearing glasses when Nd₂O₃ is added - and more precisely in the depolymerized regions where Nd³⁺ cations and [MoO₄]²⁻ entities are located - could be at the origin of the evolution of the molybdenum solubility in the glass.     

A MAS NMR structural study of cadmium phosphate glasses

Cadmium phosphate glasses, of general formula xCdO(1−x)P₂O₅ (0.25?x?0.6), have been prepared by melting in alumina crucibles, with resulting dissolution of up to 6.4 mol% Al₂O₃. The local structure in these glasses has been studied using ³¹P, ²⁷Al and ¹¹³Cd nuclear magnetic resonance. The distribution of [PO₄]Qⁿ species as a function of composition has been shown to follow the simple binary model. The rate of change of the chemical shift of the ³¹P species in the Q² environment depends on the bond order, which in turn reflects the extent of double bonding between phosphorus and oxygen.     

Effect of fluoride ion incorporation on the structural aspects of barium-sodium borosilicate glasses

Barium-sodium borosilicate glasses containing upto 6 wt% fluoride ions were prepared by conventional melt quench method and characterized by ¹⁹F, ²⁹Si and ¹¹B nuclear magnetic resonance (NMR) techniques.¹⁹F NMR studies have confirmed the presence of mainly linkages like F-Si(n) or F-B(n) along with F-Ba(n). Their relative concentrations are unaffected by F⁻ content in the glass. Incorporation of fluoride ions in the glass is associated with significant reduction in the nonbridging oxygen concentration attached to silicon, as revealed by the increase in the concentration of Q³ structural units of silicon at the expense of Q² structural units. ¹¹B NMR studies have established that the relative concentrations of BO₃ structural units are higher for F⁻ ion containing glasses compared to the one without F⁻ ion incorporation. The observed increase in the relative concentrations of Q³ structural units of silicon and BO₃ structural units with fluoride ion incorporation in the glass has been attributed to the formation of F-Ba(n) type of linkages, thereby reducing the concentration of network modifying cations for breaking the Si-O-Si/B-O-B linkages. Formation of such structural units weakens the glass network thereby decreasing the glass transition temperatures.     

Magnetic resonance study of the crystallization behavior of InF3-based glasses doped with Cu2+, Mn2+ and Gd3+

The crystallization of fluoroindate glasses doped with Gd³⁺, Mn²⁺ and Cu²⁺ heat treated at different temperatures, ranging from the glass transition temperature (T_g) to the crystallization temperature (T_c), are investigated by electron paramagnetic resonance (EPR) and ¹⁹F nuclear magnetic resonance (NMR). The EPR spectra indicate that the Cu²⁺ ions in the glass are located in axially distorted octahedral sites. In the crystallized glass, the g-values agreed with those reported for Ba₂ZnF₆, which correspond to Cu²⁺ in a tetragonal compressed F⁻ octahedron and to Cu²⁺ on interstitial sites with a square-planar F⁻ co-ordination. The EPR spectra of the Mn²⁺ doped glasses exhibit a sextet structure due to the Mn²⁺ hyperfine interaction. These spectra suggest a highly ordered environment for the Mn²⁺ ions (close to octahedral symmetry) in the glass. The EPR spectra of the recrystallized sample exhibit resonances at the same position, suggesting that the Mn²⁺ ions are located in sites of highly symmetric crystalline field. The increase of the line intensity of the sextet and the decrease of the background line in the thermal treated samples suggest that the Mn²⁺ ions move to the highly ordered sites which contribute to the sextet structure. The EPR spectra of the Gd³⁺ doped glasses exhibit the typical U-spectrum of a s-state ion in a low symmetry site in disordered systems. The EPR of the crystallized glasses, in contrast, have shown a strong resonance in g ≈ 2.0, suggesting Gd³⁺ ions in environment close to cubic symmetry. The ¹⁹F NMR spin–lattice relaxation rates were also strongly influenced by the crystallization process that takes over in samples annealed above T_c. For the glass samples (doped or undoped) the ¹⁹F magnetization recoveries were found to be adjusted by an exponential function and the spin–lattice relaxation was characterized by a single relaxation time. In contrast, for the samples treated above T_c, the ¹⁹F magnetization-recovery becomes non-exponential. A remarkable feature of our results is that the changes in the Cu²⁺, Mn²⁺, Gd³⁺ EPR spectra and NMR relaxation, are always observed for the samples annealed above T_c.     

Crystallization mechanism of glass-ceramics prepared from Ni–Cu–Co mining wastes

The presence of minor elements on the crystallization kinetics of iron-rich glass obtained from a Ni–Cu–Co mining waste has been investigated. Two glasses named WG2 and RG were melted at 1500 °C. WG2 was prepared by using the mining waste, whereas RG contains pure oxides and no minor elements. WG2 and RG glasses presented high tendency toward crystallization with K_H coefficients of 0.21 and 0.29, respectively. Due to the presence of minor elements WG2 crystallizes at lower temperatures than RG glass leading to an increase in the viscosity. Crystallization kinetics analyzed by different models gives activation energy values close to 500 and 400 kJ·mol^? 1 for WG2 and RG, respectively. The Avrami parameter, n, depends on the particle size used for measurement and indicates the high tendency toward surface crystallization for both glasses.     

Influence of alumina addition on crystallization and texturing behavior of LaBGeO5 glass

The structure and crystallization behavior of glasses with 25La₂O₃ · 25B₂O₃ · 50GeO₂ composition, melted in platinum (P glass) and corundum (A glass) crucibles, were studied by DTA, X-ray diffraction and FTIR spectroscopy. The Al₂O₃ dissolved from corundum crucible in the A glass was estimated to be in the range 5–7 wt%. This alumina content had almost no influence on glass transition temperature but strongly affected the structure and crystallization behavior of the A glass. In fact, the P glass showed good texture-forming ability: high quality textured glass-ceramic plates based on stillwellite-like LaBGeO₅ crystals were easily obtained. On the contrary, the presence of alumina stabilized the A glass from which binary phases crystallize first, and only afterwards they are transformed in stillwellite by secondary crystallization: so in this glass texturing is hindered. Crystallization and texturing behavior of P and A glasses were well related to FTIR data. P glass contained both threefold and fourfold coordinated boron while in the A glass the presence of aluminum forced boron to assume almost exclusively threefold co-ordination. Hence the easier crystallization of stillwellite phase and the good textures obtained from the P glass contrary to the A glass, can be well understood since all boron atoms have tetrahedral co-ordination in stillwellite LaBGeO₅ crystal.     

Structural characterization of ionomer glasses by multinuclear solid state MAS-NMR spectroscopy

In the present study we report the results of ²⁹Si, ²⁷Al, ³¹P and ¹⁹F magic angle spinning nuclear magnetic resonance spectroscopy (MAS-NMR) of 4.5SiO₂-3Al₂O₃-1.5P₂O₅-(5−z)CaO-zCaF₂ glasses with z = 0-3 to elucidate the effect of fluoride content on the glass structure. The ²⁹Si MAS-NMR spectra gave a chemical shift of about −90 ppm corresponding to Q³(3Al) and Q⁴(3Al). The ²⁷Al MAS-NMR showed a large broad central peak around 50 ppm, which is assigned to four-coordinated Al linked via oxygen to P. A shoulder around 30 ppm and a small peak at about 0 to −10 ppm appeared in the ²⁷Al MAS-NMR spectra of the glasses on increasing the fluoride content assigned to five-coordinated and six-coordinated Al species, respectively. The ³¹P MAS-NMR spectra indicated the presence of Al-O-P bonds. The ³¹P chemical shift decreased with increasing fluoride content as a result of calcium being complexed with fluoride. This resulted in a reduction of the number of available cations to charge balance non bridging oxygens in phosphorus and an increase in the number of Al-O-P bonds being formed, instead. The ¹⁹F spectra indicated the presence of Al-F-Ca(n) and F-Ca(n) species in all the glasses containing fluoride as well as an additional Si-F-Ca(n) species in the glasses with higher fluoride content.     

Structure-property correlation in (50 − x)Na2O–50P2O5–xCoCl2 glassy systems

Ternary sodium–cobalt–phosphate glasses of the composition (50 − x)Na₂O–50P₂O₅–xCoCl₂ with x varying between 0 and 15 mol% prepared by melt quenching have been characterized by Fourier transform infrared (FT-IR) spectroscopy and X-ray diffraction (XRD) techniques. Thermal (T_g, T_c) and electrical properties have been investigated. Infrared spectra reveal the formation of metaphosphate glasses (Q² tetrahedral units) with symmetric bridging oxygen (P–O–P) and non-bridging oxygen (P–O⁻). The spectra also indicate the formation of P–O–Co bonds in the metaphosphate glasses that replace P–O⁻–Na⁺ bonds. The results of thermal studies correlate with these FT-IR findings and support the formation of P–O–Co bonds and an increased cross-link density with increasing CoCl₂. This results in enhanced chemical durability and increased T_g and T_c of the glasses. The electrical conductivity parameters upon changing the composition have been correlated with structural changes in the glass matrix.     

Manufacturing of porous niobium phosphate glasses

Niobium phosphate glasses with composition 33P₂O₅ · 27K₂O · 40Nb₂O₅ are usually very stable with regard to crystallization resistance, with a relatively high glass transition temperature (T_g ∼ 750 °C), and are potentially suitable for nuclear waste immobilization. Porous niobium phosphate glasses were prepared by the replication method. The porous glasses were produced via the dip-coating of an aqueous slurry containing 20 wt% powdered glass into commercial polyurethane foams. The infiltrated foams were oxidized at 600 °C for 30 min to decompose the polymeric chains and to burn out the carbon, leading to a fragile glass skeleton. Subsequent heating above the glass transition temperature in the range of 780–790 °C for 1 h, finally resulted in mechanically stable glass foams, which maintained the original interconnected pore structure of the polyurethane foam. The struts showed the neck formation between particles, evidencing the initial stage of sintering. The open and interconnected porosity of the glassy foams lies in the range of 85–90 vol.%. It was concluded that porous niobium phosphate glasses are potential candidates for immobilizing liquid nuclear waste.     

Effect of BaO on the crystallization kinetics of glasses along the Diopside-Ca-Tschermak join

We report on the effect of BaO on the crystallization kinetics of glasses in the diopside (CaMgSi₂O₆)-Ca-Tschermak (CaAl₂SiO₆) system. Partial substitution (i.e. 5%, 10% and 20%) of Ba²⁺ for Ca²⁺ was attempted in composition CaMg_0.8Al_0.4Si_1.8O₆, in three different glasses while partial substitution of B³⁺ for Al³⁺ was made in the fourth glass. Structural investigations on the glasses have been made by density measurements, molar volume and Infra-red spectroscopy (FTIR). Non-isothermal crystallization kinetic studies have been employed to study the mechanism of crystallization in all the four glasses. The Avrami parameter for the glass powders is ∼2, indicating the existence of intermediate mechanism of crystallization. Crystallization sequence in the glasses has been followed by X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM) and FTIR. Augite crystallized out being the dominant phase in all the glass-ceramics, while different polymorphs of BaAl₂Si₂O8 were present as secondary or minor phases.     

Properties and structure of (50 − x)BaO–xZnO–50P2O5 glasses

The thermal, mechanical, chemical properties and the structure of (50 − x)BaO–xZnO–50P₂O₅ (0 ⩽ x ⩽ 50 mol%) glasses were investigated. For these glasses, the density (ρ), glass transition temperature (T_g), dissolution rate (DR), ³¹P magic angle spinning nuclear magnetic resonance (MAS-NMR) spectra and Fourier-transformed infrared (FTIR) spectra were determined. As BaO was replaced by ZnO, all the properties were similarly decreased in density, Young’s modulus, T_g and water resistance. FTIR analyses revealed a shortening of phosphate chains by the shift of (P–O–P)_as band to a higher wave number owing to the substitution ZnO of BaO. The NMR spectra showed that the replacement of BaO by ZnO decreased the concentration of Q²-tetrahedral sites and increased that of Q¹-tetrahedral sites.     

Photoluminescence and structural studies on Na2O–PbO–SiO2 glasses

PbO_x[(Na₂O)_0.25(SiO₂)_0.75]_1−x glasses (with x = 0.1–0.30) were prepared by a conventional melt-quench method and characterized by UV–visible optical absorption, photoluminescence and ²⁹Si magic angle spinning nuclear magnetic resonance (MAS NMR) studies. It has been confirmed that the increased number of non-bridging oxygen atoms brought about by the increase in Q² structural units of silicon is responsible for the shifting of the wavelength corresponding to the onset of absorption, as PbO concentration increases in the glass. Emission in the visible region (400–450 nm), from these glasses has been attributed to the presence of L-centers, whose the peak maxima and line widths systematically shift to higher values by incorporating Pb²⁺ along with Na⁺ in the network modifying positions. All the Pb²⁺ ions in these glasses occupy only the network modifying positions, as revealed by the identical chemical shift values of Qⁿ structural units of silicon with increase in PbO concentration. In contrast to binary lead silicate glasses, no luminescence has been observed for comparable concentration of PbO, possibly due to the significant quenching of Pb²⁺ ions in the excited state.     

A structural study of sol–gel and melt-quenched phosphate-based glasses

Phosphate-based glasses have recently attracted much interest as a new generation of biomaterials because of their ability to react and dissolve in the physiological environment and eventually to be replaced by regenerated hard or soft tissue. A series of phosphate-based glasses containing 45 mol% P₂O₅ and various amounts of CaO and Na₂O were synthesized by sol–gel and melt-quenching techniques. A comparison between the structure of the sol–gel glass and the structure of the analogous melt-quenched glasses has been undertaken. A broad-based characterization approach combining different techniques has been used to investigate the short-range structure of the glasses and the effect of adding modifier oxides to the network structure (conventional and high energy X-ray diffraction, infra-red spectroscopy, ³¹P solid state magic angle spinning NMR spectroscopy). Sol–gel and melt-quenched glasses appear to have a similar structure, showing similar Qⁿ distributions and atomic correlations.