Syntheses and structures of P-anilino-P-chalcogeno- and P-anilino-P-iminodiazasilaphosphetidines and their group 12 and 13 metal compounds

The P-anilino-P-chalcogeno(imino)diazasilaphosphetidines [Me(2)Si(mu-N(t)Bu)(2)P=E(NHPh)] (E = O (3), S (4), Se (5), N-p-tolyl (6)) were synthesized by oxidizing the P-anilinodiazasilaphosphetidine [Me(2)Si(N(t)Bu)(2)P(NHPh)] (2) with cumene hydroperoxide, sulfur, selenium, and p-tolyl azide, respectively. The lithium salt of 4 reacted with thallium monochloride to produce ([Me(2)Si(mu-N(t)Bu)(2)P=S(NPh)-kappaN-kappaS]Tl)(7), which features a two-coordinate thallium atom. Treatment of 4-6 with AlMe(3) gave the monoligand dimethylaluminum complexes ([Me(2)Si(mu-N(t)Bu)(2)P=E(NPh)-kappaN-kappaE]AlMe(2)) (E = S (8), Se (9), N-p-tolyl (10)), respectively. In these complexes the aluminum atom is tetrahedrally coordinated by one chelating ligand and two methyl groups, as a single-crystal X-ray analysis of 8 showed. A 2 equiv amount of 4-6 reacted with diethylzinc to produce the homoleptic diligand complexes ([Me(2)Si(mu-N(t)Bu)(2)P=E(NPh)-kappaN-kappaE](2)Zn)(E = S (11), Se (12), N-p-tolyl (13)). A crystal-structure analysis of 11 revealed a linear tetraspirocycle with a tetrahedrally coordinated, central zinc atom.     

Cyclic and polycyclic tellurium-tin and tellurium-lead compounds--synthesis, structures and thermal decomposition

The miscellaneously substituted silyltellanes tBu(2)PhSiTeSiMe(3) (1) and (Me(3)Si)(3)SiTeSiMe(3) were used to synthesize the cyclic tin(II) and lead(II) tellurolates [(tBu(2)PhSiTe)(4)M(2)] (M = Sn (2), Pb (3)), [tBu(2)PhSiTePbC(SiMe(3))(3)](2) (4) and the uncommon cluster compound [{(Me(3)Si)(3)SiTe}(4)Te(2)Sn(4)] (5).     

Aluminium alkyl and aryloxide complexes of pyrazine and bipyridines: synthesis and structure

The reaction of AlMe(3) and [((t)Bu)(2)Al(micro-OPh)](2) with pyrazine (pyz), 4,4'-bipyridine (4-4'-bipy), 1,2-bis(4-pyridyl)ethane (bpetha) and 1,2-bis(4-pyridyl)ethylene (bpethe) yields (Me(3)Al)(2)(micro-pyz)(1), (Me(3)Al)(2)(micro-4,4'-bipy)(2), (Me(3)Al)(2)(micro-bpetha)(3), (Me(3)Al)(2)(micro-bipethe)(4), Al((t)Bu)(2)(OPh)(pyz)(5), [((t)Bu)(2)Al(OPh)](2)(micro-4,4-bipy)(6a), [((t)Bu)(2)Al(OPh)](2)(micro-bpetha)(7a), [((t)Bu)(2)Al(OPh)](2)(micro-bipethe)(8a). Compounds 1-4, 6a and 7a have been confirmed by X-ray crystallography. In solution compounds 1-4 undergo a rapid ligand-dissociation equilibrium resulting in a time-average spectrum in the (1)H NMR. In contrast, the solution equilibria for compounds 5-8a are sufficiently slow such that the mono-aluminium compounds may be observed by (1)H NMR spectroscopy: Al((t)Bu)(2)(OPh)(4,4-bipy)(6b), Al((t)Bu)(2)(OPh)(bpetha)(7b) and Al((t)Bu)(2)(OPh)(bpethe)(8b). The inability to isolate [((t)Bu)(2)Al(OPh)](2)(micro-pyz) and the relative stability of each complex is discussed with respect to the steric interactions across the bridging ligand (L) and the electronic effect on one Lewis acid-base interaction by the second Lewis acid-base interaction on the same ligand.     

Preparation and molecular and electronic structures of iron(0) dinitrogen and silane complexes and their application to catalytic hydrogenation and hydrosilation

Reduction of the five-coordinate iron(II) dihalide complexes (iPrPDI)FeX2 (iPrPDI = ((2,6-CHMe2)2C6H3N=CMe)2C5H3N; X = Cl, Br) with sodium amalgam under 1 atm of dinitrogen afforded the square pyramidal, high spin iron(0) bis(dinitrogen) complex (iPrPDI)Fe(N2)2. In solution, (iPrPDI)Fe(N2)2 loses 1 equiv of N2 to afford the mono(dinitrogen) adduct (iPrPDI)Fe(N2). Both dinitrogen compounds serve as effective precatalysts for the hydrogenation and hydrosilation of olefins and alkynes. Effecient catalytic reactions are observed with low catalyst loadings (< or = 0.3 mol %) at ambient temperature in nonpolar media. The catalytic hydrosilations are selective in forming the anti-Markovnikov product. Structural characterization of a high spin iron(0) alkyne and a bis(silane) sigma-complex has also been accomplished and in combination with isotopic labeling studies provides insight into the mechanism of both catalytic C-H and catalytic C-Si bond formation.     

Synthesis and structure of amido- and imido(pentafluorophenyl)borane zirconocene and hafnocene complexes: N-H and B-H activation

Treatment of Me(2)S·B(C(6)F(5))(n) H(3-n) (n=1 or 2) with ammonia yields the corresponding adducts. H(3)N·B(C(6)F(5))H(2) dimerises in the solid state through N-H···H-B dihydrogen interactions. The adducts can be deprotonated to give lithium amidoboranes Li[NH(2)B(C(6)F(5))(n)H(3-n)]. Reaction of the n=2 reagent with [Cp(2)ZrCl(2)] leads to disubstitution, but [Cp(2)Zr{NH(2)B(C(6)F(5))(2)H}(2)] is in equilibrium with the product of β-hydride elimination [Cp(2)Zr(H){NH(2)B(C(6)F(5))(2)H}], which proves to be the major isolated solid. The analogous reaction with [Cp(2)HfCl(2)] gives a mixture of [Cp(2)Hf{NH(2)B(C(6)F(5))(2)H}(2)] and the N-H activation product [Cp(2)Hf{NHB(C(6)F(5 )(2)H}]. [Cp(2)Zr{NH(2)B(C(6)F(5))(2)H}(2)]·PhMe and [Cp(2)Hf{NH(2)B(C(6)F(5))(2)H}(2)]·4(thf) exhibit β-B-agostic chelate bonding of one of the two amidoborane ligands in the solid state. The agostic hydride is invariably coordinated to the outside of the metallocene wedge. Exceptionally, [Cp(2)Hf{NH(2)B(C(6)F(5))(2)H}(2)]?PhMe has a structure in which the two amidoborane ligands adopt an intermediate coordination mode, in which neither is definitively agostic. [Cp(2)Hf{NHB(C(6)F(5))(2)H}] has a formally dianionic imidoborane ligand chelating through an agostic interaction, but the bond-length distribution suggests a contribution from a zwitterionic amidoborane resonance structure. Treatment of the zwitterions [Cp(2)MMe(μ-Me)B(C(6)F(5))(3)] (M=Zr, Hf) with Li[NH(2)B(C(6)F(5))(n)H(3-n)] (n=2) results in [Cp(2) MMe{NH(2)B(C(6)F(5))(2)H}] complexes, for which the spectroscopic data, particularly (1)J(B,H), again suggest β-B-agostic interactions. The reactions proceed similarly for the structurally encumbered [Cp'(2)ZrMe(μ-Me)B(C(6)F(5))(3)] precursor (Cp'=1,3-C(5)H(3)(SiMe(3))(2) , n=1 or 2) to give [Cp'(2)ZrMe{NH(2)B(C(6)F(5))(n)H(3-n)}], both of which have been structurally characterised and show chelating, agostic amidoborane coordination. In contrast, the analogous hafnium chemistry leads to the recovery of [Cp'(2)HfMe(2)] and the formation of Li[HB(C(6)F(5))(3)] through hydride abstraction.     

Synthesis and characterization of triazenide and triazene complexes of ruthenium and osmium

Triazenide [M(eta2-1,3-ArNNNAr)P4]BPh4 [M = Ru, Os; Ar = Ph, p-tolyl; P = P(OMe)3, P(OEt)3, PPh(OEt)2] complexes were prepared by allowing triflate [M(kappa2-OTf)P4]OTf species to react first with 1,3-ArN=NN(H)Ar triazene and then with an excess of triethylamine. Alternatively, ruthenium triazenide [Ru(eta2-1,3-ArNNNAr)P4]BPh4 derivatives were obtained by reacting hydride [RuH(eta2-H2)P4]+ and RuH(kappa1-OTf)P4 compounds with 1,3-diaryltriazene. The complexes were characterized by spectroscopy and X-ray crystallography of the [Ru(eta2-1,3-PhNNNPh){P(OEt)3}4]BPh4 derivative. Hydride triazene [OsH(eta1-1,3-ArN=NN(H)Ar)P4]BPh4 [P = P(OEt)3, PPh(OEt)2; Ar = Ph, p-tolyl] and [RuH{eta1-1,3-p-tolyl-N=NN(H)-p-tolyl}{PPh(OEt)2}4]BPh4 derivatives were prepared by allowing kappa1-triflate MH(kappa1-OTf)P4 to react with 1,3-diaryltriazene. The [Os(kappa1-OTf){eta1-1,3-PhN=NN(H)Ph}{P(OEt)3}4]BPh4 intermediate was also obtained. Variable-temperature NMR studies were carried out using 15N-labeled triazene complexes prepared from the 1,3-Ph15N=N15N(H)Ph ligand. Osmium dihydrogen [OsH(eta2-H2)P4]BPh4 complexes [P = P(OEt)3, PPh(OEt)2] react with 1,3-ArN=NN(H)Ar triazene to give the hydride-diazene [OsH(ArN=NH)P4]BPh4 derivatives. The X-ray crystal structure determination of the [OsH(PhN=NH){PPh(OEt)2}4]BPh4 complex is reported. A reaction path to explain the formation of the diazene complexes is also reported.     

New diamide-diamine ligands and their zirconium and hafnium dichloride and bis(dimethylamide) complexes

The multigram syntheses of the protio ligands (2-NC(5)H(4))CH(2)N(CH(2)CH(2)NHSiMe(2)R)(2) (R = Me, H(2)N(2)NN' 3; R = (t)Bu, H(2)N(2)NN() 4) are described via reactions of the previously reported (2-NC(5)H(4))CH(2)N(CH(2)CH(2)NH(2))(2) (1). A new synthesis of 1 is reported starting from 2-aminomethylpyridine and N-tosylaziridine, proceeding via (2-NC(5)H(4))CH(2)N(CH(2)CH(2)NHTs)(2) (2). Reaction of H(2)N(2)NN' or H(2)N(2)NN* with (n)BuLi gives good yields of the dilithiated derivatives Li(2)N(2)NN' and Li(2)N(2)NN*. Reaction of H(2)N(2)NN' or H(2)N(2)NN* with [MCl(2)(CH(2)SiMe(3))(2)(Et(2)O)(2)] gives the cis-dichloride complexes [MCl(2)(L)] (L = N(2)NN', M = Zr 7 or Hf 8; L = N(2)NN(), M = Zr 9). The corresponding reactions of H(2)N(2)NN' or H(2)N(2)NN* with [Zr(NMe(2))(4)] afford the bis(dimethylamide) derivatives [Zr(NMe(2))(2)(L)] (L = N(2)NN' 10 or N(2)NN* 11). All of these protonolysis reactions proceed smoothly and in good yields. Attempts to prepare the titanium complexes [Ti(X)(2)(N(2)NN')] (X = Cl or NMe(2)) were unsuccessful. The X-ray crystal structures of (2-NC(5)H(4))CH(2)N(CH(2)CH(2)NHTs)(2).EtOH, [ZrCl(2)(N(2)NN')].0.5C(6)H(6), [Zr(NMe(2))(2)(N(2)NN')], and [Zr(NMe(2))(2)(N(2)NN*)] are reported.     

Kinetic and donor stabilization of organotellurenyl iodides and azides

The first tellurium compounds containing the extremely bulky tris(phenyldimethylsilyl)methyl (Tpsi) and 2,6-bis(2,4,6-triisopropylphenyl)phenyl (2,6-Trip(2)C(6)H(3)) moieties have been synthesized and isolated. Careful oxidation of the tellurolate TpsiTeLi (1) resulted in the formation of the crowded ditellane (TpsiTe)(2) (2), and iodination of 2 gave the alkanetellurenyl iodide TpsiTeI (3). In a similar fashion, the terphenyl-substituted ditellane (2,6-Trip(2)C(6)H(3)Te)(2) (9) and the arenetellurenyl iodide 2,6-Trip(2)C(6)H(3)TeI (10) were prepared. Reaction of the iodides TpsiTeI (3) and 2,6-Trip(2)C(6)H(3)TeI (10), as well as TripTeI, MesTeI (Trip = 2,4,6-triisopropylphenyl, Mes = 2,4,6-tri-tert-butylphenyl), and the donor-stabilized 2-Me(2)NCH(2)C(6)H(4)TeI, with AgN(3) resulted in the formation and isolation of the corresponding tellurenyl azides TpsiTeN(3) (4), TripTeN(3) (7), MesTeN(3) (8), 2,6-Trip(2)C(6)H(3)TeN(3) (11), and 2-Me(2)NCH(2)C(6)H(4)TeN(3) (12). Furthermore, the corresponding tris(ethyldimethylsilyl)methyl-containing (Tesi) tellurium compounds (TesiTe)(2), TesiTeI (5), and TesiTeN(3) (6) have been prepared but could not be isolated in pure form. The crystal structures of TpsiTeLi (1), (TpsiTe)(2) (2), TpsiTeN(3) (4), 2,6-Trip(2)C(6)H(3)TeI (10), 2,6-Trip(2)C(6)H(3)TeN(3) (11), and 2-Me(2)NCH(2)C(6)H(4)TeN(3) (12) have been determined by X-ray diffraction. Additionally, computational studies of the molecules for which experimental structural data were available were performed.     

Synthesis and characterization of mono- and binuclear platinum complexes containing terminal and bridging diynyldiphenylphosphine ligands

A series of mononuclear platinum complexes containing diynyldiphenylphosphine ligands [cis-Pt(C(6)F(5))(2)(PPh(2)C[triple bond]CC(6)H(4)C[triple bond]CR)L](n)(n= 0, L = tht, R = Ph 2a, Bu(t)2b; L = PPh(2)C[triple bond]CC(6)H(4)C[triple bond]CR, 4a, 4b; n=-1, L = CN(-), 3a, 3b) has been synthesized and the X-ray crystal structures of 4a and 4b have been determined. In order to compare the eta2-bonding capability of the inner and outer alkyne units, the reactivity of towards [cis-Pt(C(6)F(5))(2)(thf)(2)] or [Pt(eta2)-C(2)H(4))(PPh(3))(2)] has been examined. Complexes coordinate the fragment "cis-Pt(C(6)F(5))(2)" using the inner alkynyl fragment and the sulfur of the tht ligand giving rise the binuclear derivatives [(C(6)F(5))(2)Pt(mu-tht)(mu-1kappaP:2eta2-C(alpha),C(beta)-PPh(2)C[triple bond]CC(6)H(4)C[triple bond]CR)Pt(C(6)F(5))(2)](R = Ph 5a, Bu(t)5b). The phenyldiynylphosphine complexes 2a, 3a and 4a react with [Pt(eta2)-C(2)H(4))(PPh(3))(2)] to give the mixed-valence Pt(II)-Pt(0) complexes [((C(6)F(5))(2)LPt(mu-1kappaP:2eta2)-C(5),C(6)-PPh(2)C[triple bond]CC(6)H(4)C[triple bond]CPh))Pt(PPh(3))(2)](n)(L = tht 6a, CN 8a and PPh(2)C[triple bond]CC(6)H(4)C[triple bond]CPh 9a) in which the Pt(0) fragment is eta2-complexed by the outer fragment. Complex 6a isomerizes in solution to a final complex [((C(6)F(5))(2)(tht)Pt(mu-1kappaP:2eta2)-C(alpha),C(beta)-PPh(2)C[triple bond]CC(6)H(4)C[triple bond]CPh))Pt(PPh(3))(2)]7a having the Pt(0) fragment coordinated to the inner alkyne function. In contrast, the tert-butyldiynylphosphine complexes 2b and 3b coordinate the Pt(0) unit through the phosphorus substituted inner acetylenic entity yielding 7b and 8b. By using 4a and 2 equiv. of [Pt(eta2)-C(2)H(4))(PPh(3))(2)] as precursors, the synthesis of the trinuclear complex [cis-((C(6)F(5))(2)Pt(mu-1kappaP:2eta2)-C(5),C(6)-PPh(2)C[triple bond]CC(6)H(4)C[triple bond]CPh)(2))(Pt(PPh(3))(2))(2)]10a, bearing two Pt(0)(PPh(3))(2)eta2)-coordinated to the outer alkyne functions is achieved. The structure of 7a has been confirmed by single-crystal X-ray diffraction.     

Diastereo- and Enantioselective Synthesis of syn-alpha-Vinylchlorohydrins and cis-Vinylepoxides

A new method to generate chiral syn-vinylchlorohydrins and cis-vinyloxiranes is reported. Reaction of (alpha-haloallyl)lithiums with methoxy-9-BBN or Ipc(2)BOMe followed by treatment with BF(3).OEt(2) leads to (Z)-(gamma-haloallyl)boranes which react with aldehydes to yield cis-vinylepoxides (de >/= 90%) upon oxidative workup. Alternatively, addition of ethanolamine to the allylboration product yields syn-alpha-halohydrins (de >/= 90%) that are also easily cyclized to cis-vinylepoxides. Extension of this protocol using [(Z)-gamma-chloroallyl]BIpc(2) leads to chiral syn-alpha-chlorohydrins and cis-vinylepoxides in high de (>/=90%) and ee (90-99%). Enantioselectivity of reactions of chiral (Z)-(gamma-chloroallyl)boranes with aldehydes are more sensitive to reaction conditions than enantioselectivity of reactions of other alpha-or gamma-substituted allylboranes. The effects of proportion of BF(3).OEt(2) and the relative efficacies of LiNR(2) bases on diastereo- and enantioselectivity of the chloroallylation are reported.     

Second- and third-order triples and quadruples corrections to coupled-cluster singles and doubles in the ground and excited states

Second- and third-order perturbation corrections to equation-of-motion coupled-cluster singles and doubles (EOM-CCSD) incorporating excited configurations in the space of triples [EOM-CCSD(2)T and (3)T] or in the space of triples and quadruples [EOM-CCSD(2)TQ] have been implemented. Their ground-state counterparts--third-order corrections to coupled-cluster singles and doubles (CCSD) in the space of triples [CCSD(3)T] or in the space of triples and quadruples [CCSD(3)TQ]--have also been implemented and assessed. It has been shown that a straightforward application of the Rayleigh-Schrodinger perturbation theory leads to perturbation corrections to total energies of excited states that lack the correct size dependence. Approximations have been introduced to the perturbation corrections to arrive at EOM-CCSD(2)T, (3)T, and (2)TQ that provide size-intensive excitation energies at a noniterative O(n(7)), O(n(8)), and O(n(9)) cost (n is the number of orbitals) and CCSD(3)T and (3)TQ size-extensive total energies at a noniterative O(n(8)) and O(n(10)) cost. All the implementations are parallel executable, applicable to open and closed shells, and take into account spin and real Abelian point-group symmetries. For excited states, they form a systematically more accurate series, CCSD1 eV) and the ground-state wave function has single-determinant character. In other cases, however, the corrections tend to overestimate the triples and quadruples effects, the origin of which is discussed. For ground states, the third-order corrections lead to a rather small improvement over the highly effective second-order corrections [CCSD(2)T and (2)TQ], which is a manifestation of the staircase convergence of perturbation series.     

Synthesis and fluorescence emission of neutral and anionic di- and tetra-carboranyl compounds

A new family of photoluminescent neutral and anionic di-carboranyl and tetra-carboranyl derivatives have been synthesized and characterized. The reaction of α,α'-bis(3,5-bis(bromomethyl)phenoxy-m-xylene with 4 equiv. of the monolithium salt of 1-Ph-1,2-C(2)B(10)H(11) or 1-Me-1,2-C(2)B(10)H(11) gives the neutral tetracarboranyl-functionalized aryl ether derivatives closo-1 and closo-2, respectively. The addition of the monolithium salt of 1-Ph-1,2-closo-C(2)B(10)H(11) to α,α,'-dibromo-m-xylene or 2,6-dibromomethyl-pyridine gives the corresponding di-carboranyl derivatives closo-3 and closo-4. These compounds, which contain four or two closo clusters, were degraded using the classical method, KOH in EtOH, affording the corresponding nido species, which were isolated as potassium or tetramethylammonium salts. All the compounds were characterized by IR, (1)H, (11)B and (13)C NMR spectroscopy, and the crystal structure of closo-3 was analysed by X-ray diffraction. The carboranyl fragments are bonded through CH(2) units to different organic moieties, and their influence on the photoluminescent properties of the final molecules has been studied. All the closo- and nido-carborane derivatives exhibit a blue emission under ultraviolet excitation at room temperature in different solvents. The fluorescence properties of these closo and nido-derivatives depend on the substituent (Ph or Me) bonded to the C(cluster), the solvent polarity, and the organic unit bearing the carborane clusters (benzene or pyridine). In the case of nido-derivatives, an important effect of the cation is also observed.     

Amine- and ether-chelated aryllithium reagents-structure and dynamics

Chelation and aggregation in phenyllithium reagents with potential 6- and 7-ring chelating amine (2, 3) and 5-, 6-, and 7-ring chelating ether (4, 5, 6) ortho substituents have been examined utilizing variable temperature (6)Li and (13)C NMR spectroscopy, (6)Li and (15)N isotope labeling, and the effects of solvent additives. The 5- and 6-ring ether chelates (4, 5) compete well with THF, but the 6-ring amine chelate (2) barely does, and 7-ring amine chelate (3) does not. Compared to model compounds (e.g., 2-ethylphenyllithium 7), which are largely monomeric in THF, the chelated compounds all show enhanced dimerization (as measured by K = [D]/[M](2)) by factors ranging from 40 (for 6) to more than 200 000 (for 4 and 5). Chelation isomers are seen for the dimers of 5 and 6, but a chelate structure could be assigned only for 2-(2-dimethylaminoethyl)phenyllithium (2), which has an A-type structure (both amino groups chelated to the same lithium in the dimer) based on NMR coupling in the (15)N, (6)Li labeled compound. Unlike the dimer, the monomer of 2 is not detectably chelated. With the exception of 2-(methoxymethyl)phenyllithium (4), which forms an open dimer (12) and a pentacoordinate monomer (13), the lithium reagents all form monomeric nonchelated adducts with PMDTA.     

Syntheses and X-ray structures of monocyclic,bicyclic, and spirocyclic gallium and indium boraamidinates

The reactions of [Li(2)[PhB(N(t)Bu)(2)]](2) with GaCl(3) in various stoichiometries yield [Li(thf)(4)][PhB(mu-N(t)Bu)(2)GaCl(2) x GaCl(3)] (1), [PhB(mu-N(t)Bu)(2)GaCl](2) (2), and [mu-Li(OEt(2))[PhB(N(t)Bu)(2)]Ga] (3a), a series of complexes in which the three chloride ligands are successively replaced by the dianion [PhB(N(t)Bu)(2)](2-). The X-ray structures of 1, 2, and 3a show that the boraamidinate ligand adopts an N,N'-chelating mode. In the ion-separated complex 1, one of the nitrogen atoms is coordinated to a GaCl(3) molecule. The related indium complexes [mu-LiCl(thf)(2)][PhB(mu-N(t)Bu)(2)InCl](2) (4) and [mu-Li(OEt(2))[PhB(mu-N(t)Bu)(2)]In] (3b) were obtained in a similar manner. Complex 4 is the indium analogue of 2 with the incorporation of a bissolvated LiCl molecule. In 3a and 3b the spirocyclic [[PhB(mu-N(t)Bu)(2)](2)M](-) (M = Ga, In) anions are N,N'-chelated to the [Li(OEt(2))](+) counterion. Prolonged reactions result in the formation of [PhB(mu-N(t)Bu)(2)GaCl][(t)BuN(H)GaCl(2)] (5) and [[PhB(mu-N(t)Bu)(2)InCl][(t)BuN(H)InCl(2)][mu-LiCl(OEt(2))(2)]] (6), respectively. The X-ray structures of 5 and 6 reveal bicyclic structures which formally involve the entrapment of the monomers (t)BuN(H)MCl(2) by a four-membered BN(2)M ring (M = Ga, In). The synthesis and X-ray structure of Cl(2)Ga[mu-N(H)(t)Bu](2)GaCl(2) are also reported.     

Atmospheric chemistry of isoflurane, desflurane, and sevoflurane: kinetics and mechanisms of reactions with chlorine atoms and OH radicals and global warming potentials

The smog chamber/Fourier-transform infrared spectroscopy (FTIR) technique was used to measure the rate coefficients k(Cl + CF(3)CHClOCHF(2), isoflurane) = (4.5 ± 0.8) × 10(-15), k(Cl + CF(3)CHFOCHF(2), desflurane) = (1.0 ± 0.3) × 10(-15), k(Cl + (CF(3))(2)CHOCH(2)F, sevoflurane) = (1.1 ± 0.1) × 10(-13), and k(OH + (CF(3))(2)CHOCH(2)F) = (3.5 ± 0.7) × 10(-14) cm(3) molecule(-1) in 700 Torr of N(2)/air diluent at 295 ± 2 K. An upper limit of 6 × 10(-17) cm(3) molecule(-1) was established for k(Cl + (CF(3))(2)CHOC(O)F). The laser photolysis/laser-induced fluorescence (LP/LIF) technique was employed to determine hydroxyl radical rate coefficients as a function of temperature (241-298 K): k(OH + CF(3)CHFOCHF(2)) = (7.05 ± 1.80) × 10(-13) exp[-(1551 ± 72)/T] cm(3) molecule(-1); k(296 ± 1 K) = (3.73 ± 0.08) × 10(-15) cm(3) molecule(-1), and k(OH + (CF(3))(2)CHOCH(2)F) = (9.98 ± 3.24) × 10(-13) exp[-(969 ± 82)/T] cm(3) molecule(-1); k(298 ± 1 K) = (3.94 ± 0.30) × 10(-14) cm(3) molecule(-1). The rate coefficient of k(OH + CF(3)CHClOCHF(2), 296 ± 1 K) = (1.45 ± 0.16) × 10(-14) cm(3) molecule(-1) was also determined. Chlorine atoms react with CF(3)CHFOCHF(2) via H-abstraction to give CF(3)CFOCHF(2) and CF(3)CHFOCF(2) radicals in yields of approximately 83% and 17%. The major atmospheric fate of the CF(3)C(O)FOCHF(2) alkoxy radical is decomposition via elimination of CF(3) to give FC(O)OCHF(2) and is unaffected by the method used to generate the CF(3)C(O)FOCHF(2) radicals. CF(3)CHFOCF(2) radicals add O(2) and are converted by subsequent reactions into CF(3)CHFOCF(2)O alkoxy radicals, which decompose to give COF(2) and CF(3)CHFO radicals. In 700 Torr of air 82% of CF(3)CHFO radicals undergo C-C scission to yield HC(O)F and CF(3) radicals with the remaining 18% reacting with O(2) to give CF(3)C(O)F. Atmospheric oxidation of (CF(3))(2)CHOCH(2)F gives (CF(3))(2)CHOC(O)F in a molar yield of 93 ± 6% with CF(3)C(O)CF(3) and HCOF as minor products. The IR spectra of (CF(3))(2)CHOC(O)F and FC(O)OCHF(2) are reported for the first time. The atmospheric lifetimes of CF(3)CHClOCHF(2), CF(3)CHFOCHF(2), and (CF(3))(2)CHOCH(2)F (sevoflurane) are estimated at 3.2, 14, and 1.1 years, respectively. The 100 year time horizon global warming potentials of isoflurane, desflurane, and sevoflurane are 510, 2540, and 130, respectively. The atmospheric degradation products of these anesthetics are not of environmental concern.     

Homo- and hetero-bimetallic glycolates and triethanolaminates of niobium

[Nb(OⁱPr)₅] reacts with 2,5-dimethylhexane-2,5-diol (LH₂), 2,3-dimethylbutane-2,3-diol (L¹H₂) and triethanolamine (teaH₃) in different stoichiometric ratios to yield complexes of the types: [Nb(OⁱPr)₃(L)] (1), [Nb(OⁱPr)(L)₂] (2), [Nb(L)₂(LH)] (3), [Nb(L¹)₂(L¹H)] (4) and [Nb(tea)(teaH)] (5). Equimolar reactions of (3), (4) and (5) with Al(OⁱPr)₃, Ti(OⁱPr)₄ and [Ta(OⁱPr)₅] yield novel heterobimetallic isopropoxide-glycolate (6)–(9) and -triethanolaminate (10)–(12) derivatives. Reactions in appropriate molar ratios of (1), (2) and (10) with alkoxyethanols [ROC₂H₄OH; R = Me, Et] and acetylacetone [acacH] give derivatives [(MeOC₂H₄O)₃Nb(L)] (13), [(acac)Nb(L)₂] (14), [Nb(tea)₂{Al(OC₂H₄OMe)₂}] (15), [Nb(tea)₂{Al(OC₂H₄OEt)₂}] (16) and [Nb(tea)₂{Al(acac)₂}] (17). The complexes (6), (8) and (10) on reaction with an excess of t-BuOH give the tert-butoxo analogues (18), (19) and (20), respectively. These new derivatives have been characterized by elemental analyses, spectroscopic studies and molecular weight measurements.     

Adsorption and dissociation of H2O2 on Pt and Pt-alloy clusters and surfaces

The adsorption of H(2)O(2) on Pt and Pt-M alloys, where M is Cr, Co, or Ni, is investigated using density functional theory. Binding energies calculated with a hybrid DFT functional (B3PW91) are in the range of -0.71 to -0.88 eV for H(2)O(2) adsorbed with one of the oxygen atoms on top Pt positions of Pt(3), Pt(2)M, and PtM(2), and enhanced values in the range of -0.81 to -1.09 eV are found on top Ni and Co sites of the Pt(2)M clusters. Adsorption on top sites of Pt(10) yields a weaker binding of -0.48 eV, whereas on periodic Pt(111) and Pt(3)Co(111) surfaces, H(2)O(2) generally dissociates into two OH radicals. On the other hand, attempts to attach H(2)O(2) on bridge sites cause spontaneous dissociation of H(2)O(2) into two adsorbed OH radicals, suggesting that stable adsorptions on bridge sites are not possible for any of the clusters or extended surfaces that are being studied. We also found that the water-H(2)O(2) interaction reduces the strength of the adsorption of H(2)O(2) on these clusters and surfaces.     

Synthesis and characterization of new calcium phenylphosphonates and 4-carboxyphenylphosphonates

Three new calcium phenylphosphonates, CaC(6)H(5)PO(3).2H(2)O, Ca(3)(C(6)H(5)PO(3)H)(2)(C(6)H(5)PO(3))(2).4H(2)O, and CaC(6)H(5)PO(3).H(2)O, and two calcium 4-carboxyphenylphosphonates, Ca(HOOCC(6)H(4)PO(3)H)(2) and Ca(3)(OOCC(6)H(4)PO(3))(2).6H(2)O, were prepared. It was found that CaC(6)H(5)PO(3).2H(2)O transformed into previously known Ca(C(6)H(5)PO(3)H)(2) via Ca(3)(C(6)H(5)PO(3)H)(2)(C(6)H(5)PO(3))(2).4H(2)O in the presence of phenylphosphonic acid, and vice versa, Ca(C(6)H(5)PO(3)H)(2) turned into CaC(6)H(5)PO(3).2H(2)O in a weak basic medium. A similar relationship was found between Ca(HOOCC(6)H(4)PO(3)H)(2) and Ca(3)(OOCC(6)H(4)PO(3))(2).6H(2)O; i.e., Ca(3)(OOCC(6)H(4)PO(3))(2).6H(2)O transformed into Ca(HOOCC(6)H(4)PO(3)H)(2) in the presence of 4-carboxyphenylphosphonic acid. On the contrary, Ca(3)(OOCC(6)H(4)PO(3))(2).6H(2)O is formed from Ca(HOOCC(6)H(4)PO(3)H)(2) in the presence of ammonium as a weak base. The structure of Ca(HOOCC(6)H(4)PO(3)H)(2) was solved from X-ray powder diffraction data by an ab initio method using a FOX program. The compound is monoclinic, space group C2/c (No. 15), a = 49.218(3) A, b = 7.7609(4) A, c = 5.4452(3) A, beta = 128.119(3) degrees , and Z = 4. Its structure is one-dimensional with [Ca(2)(HOOCC(6)H(4)PO(3)H)(4)](infinity) ribbons forming basic building blocks. The ribbons are held together by hydrogen bonds between carboxylic groups.     

Synthesis, structure, and dynamics of six-membered metallacoronands and metallodendrimers of iron and indium

In the reaction of the N-substituted diethanolamines (H(2)L(1-3)) (1-3) with calcium hydride followed by addition of iron(III) or indium(III) chloride, the iron wheels [Fe(6)Cl(6)(L(1))(6)] (4) and [Fe(6)Cl(6)(L(2))(6)] (6) or indium wheels [In(6)Cl(6)(L(1))(6)] (5), [In(6)Cl(6)(L(2))(6)] (8) and [In(6)Cl(6)(L(3))(6)] (9) were formed in excellent yields. Exchange of the chloride ions of 6 by thiocyanate ions afforded [Fe(6)(SCN)(6)(L(2))(6)] (7). Whereas the structures of 4, 5 and 7 were determined unequivocally by single-crystal X-ray analyses, complexes 8 and 9 were characterised by NMR spectroscopy. Contrary to what is normally presumed, the scaffolds of six-membered metallic wheels are not generally rigid, but rather undergo nondissociative topomerisation processes. This was shown by variable temperature (VT) (1)H NMR spectroscopy for the indium wheel [In(6)Cl(6)(L(1))(6)] (5) and is highlighted for the enantiotopomerisation of one indium centre [ 1/6[S(6)-5]<==>[1/6[S(6)-5']]. The self-assembly of metallic wheels, starting from diethanolamine dendrons, is an efficient strategy for the convergent synthesis of metallodendrimers.     

Synthesis, structures and ab initio studies of selenium and tellurium bis(carbodithioates and carbothioates)

A series of selenium and tellurium bis(carbodithioates and carbothioates) were synthesized. X-Ray structure analysis revealed that Se(SSCC(6)H(4)OMe-2)(2), Te(SSCC(6)H(4)OMe-2)(2) and Te(SSCC(6)H(4)Me-4)(2) have trapezoidal-planar configuration of ES(4) (E = Se, Te) and despite the larger atomic radii, the C=S···Te distances in Te(SSCC(6)H(4)OMe-2)(2) are comparable to those in the corresponding selenium derivatives Se(SSCC(6)H(4)OMe-2)(2). Molecular-orbital calculations performed on compounds E(E'SCR)(2) (E = S, Se, Te; E' = O, S; R = Me, Ph, C(6)H(4)OMe-2) showed that the syn-conformers of Se(SSCR)(2) and Te(SSCR)(2) are more stable than the corresponding anti-ones, while, in the case of carbothioic acid derivatives, E(SOCR)(2) showed that their anti-conformers are all more stable than the corresponding syn-ones. Natural bond orbital (NBO) analyses of these dithio-compounds revealed that two types of orbital interactions, n(S(1))→σ*(E-S(2)) and n(O)→σ*(E-S(2)), play a role in the bonding of E[S(2)S(1)CC(6)H(4)OMe-2](2) (E = Se, Te) and the former play a particularly predominant role.