Effect of TiO2 addition on the chemical durability of Bi2O3–SiO2–ZnO–B2O3 glass system

The effect of the substitution of ZnO for TiO₂ on the chemical durability of Bi₂O₃–SiO₂–ZnO–B₂O₃ glass coatings in hot acidic medium (0.1 N H₂SO₄ at 80 °C) for different times was studied. The thick films produced by a screen-printing method and heat treated at 700 °C/5 min were analyzed by X-ray diffraction, scanning electron microscopy, and energy dispersive spectroscopy. The glass from the Bi₂O₃–SiO₂–ZnO–B₂O₃ system developed Zn₂SiO₄ and a glassy phase that were readily attacked by hot 0.1 N sulfuric acid, whereas the heat treated coating from the Bi₂O₃–SiO₂–TiO₂–ZnO–B₂O₃ system presented a finer microstructure with thin interconnected Bi₄Ti₃O₁₂ crystals and a glassy phase more resistant to hot 0.1 N sulfuric acid attack etching.     

Effects of Fe2O3 replacement of ZnO on elastic and structural properties of 80TeO2–(20 − x)ZnO–xFe2O3 tellurite glass system

Ternary tellurite glasses with the chemical formula 80TeO₂–(2 ? x)ZnO–xFe₂O₃ (x = 0–15 mol%) have been prepared by the melt-quenching method. Elastic and structural properties of the glasses were investigated by measuring both longitudinal and shear velocities using the pulse-echo overlap method at 5 MHz and Fourier transform infrared (FTIR) spectroscopy, respectively. Both longitudinal and shear velocity showed a large increase of 3.40% and 4.68%, respectively, at x = 5 mol% before a smaller increase for x > 5 mol%. Interestingly, longitudinal modulus (L), shear modulus (G), bulk modulus (K) and Young's modulus (E) recorded similar trends with increase in Fe₂O₃. The initial large increases in shear and longitudinal velocity and related elastic moduli observed at x = 5 mol% are suggested to be due to structural modification which enhances rigidity of the glass network. FTIR analysis showed increase in bridging oxygen (BO) as indicated by the relative intensity of the TeO₄ assigned peaks and increase in intensity of the FeO₆ assigned peak (~ 451 cm^? 1) which indicates that Fe acts as a modifier in the glass network. The increase in rigidity of the glass system is suggested to be due to the increase of BO together with the formation of strong covalent FeO bond. Quantitative analysis based on the bulk compression and ring deformation models showed that the k_bc/k_exp value decreased gradually from 2.41 (x = 0 mol%) to 2.02 (x = 15 mol%) which infers that the glass system became a relatively more open 3D network as Fe₂O₃ was increased.     

Influence of Al2O3 addition on the properties of Bi2O3–BaO–SiO2–RxOy (R = K,Zn, etc.) glass sealant

A series of Bi₂O₃–BaO–SiO₂–R_xO_y (designated BiBaSi glass) glass sealants doped with different contents of α-Al₂O₃ have been investigated. Al₂O₃ was added as a modifier to affect the structure and the behavior of the glass. The thermal properties such as glass transition temperature (Tg), softening temperature (Tf) and coefficient of thermal expansion (CTE) were measured by a dilatometer. The sealing performance was investigated by sealing a SOFC single cell stack and measuring its open circuit voltage (OCV). Tg, Tf and suitable usage temperature of the sealants increased with increasing Al₂O₃ content in the glass, while CTE decreased. When the Al₂O₃ content was lower than 10 wt.%, excellent sealing performance was observed.     

Glass formation and third-order optical nonlinear properties within TeO2–Bi2O3–BaO pseudo-ternary system

Tellurite glasses from TeO₂–Bi₂O₃–BaO pseudo-ternary system were prepared using a conventional melt-quenching method and its glass-forming region was determined. A series of glasses were selected and their third-order optical nonlinearities (TONL) were measured by employing the Z-scan method at a wavelength of 800 nm with femtosecond laser pulses. The results showed that glass former Te⁴⁺ ions exhibited positive influences on the TONL and glass modifiers Ba²⁺ ions behaved similarly; low concentrated Bi³⁺ ions as glass modifiers weakened the nonlinearities, but an excess amount of Bi³⁺ behaved oppositely. FTIR measurements demonstrated that chemical bonds especially Te–O_eq vibrated at a high energy level remarkably promoted the TONL susceptibility χ⁽³⁾, and the glass sample with the highest Bi₂O₃ content exhibited the largest χ⁽³⁾ value which was due to the presence of BiO₃ polyhedra.     

Production and properties of high purity TeO2− WO3−(La2O3, Bi2O3) and TeO2− ZnO−Na2O−Bi2O3 glasses

TeO₂–WO₃ (TW), TeO₂–WO₃–La₂O₃ (TWL), TeO₂–WO₃–La₂O₃–Bi₂O₃ (TWLB) and TeO₂–ZnO–Na₂O–Bi₂O₃ (TZNB) glasses were produced by high-purity oxide mixtures melting in platinum or gold crucible at 800 °C in the atmosphere of purified oxygen. The total content of Cu, Mn, Fe, Co and Ni impurities was not more than 0.1–0.5 ppm wt in the initial oxides and glasses. The stability of TZNB glasses to crystallization, characterized by (T_x ? T_g) value more than 150 °C, was demonstrated by DSC measurements at heating rate 10 K/min. In the case of La₂O₃-containing glasses the thermal effects of both crystallization and fusion of the crystallized phases were not observed. The hydroxyl groups absorption coefficients of pure tellurite glasses at the maximum of the absorption band (λ ~ 3 μm) were in the region of 0.012–0.001 cm^?1. The optical absorption losses, measured by the laser calorimetry method at λ = 1.56 and 1.97 μm, did not exceed 100 dB/km.     

Microstructural characteristics and crystallization of CaO–P2O5–Na2O–ZnO glass ceramics prepared by sol–gel method

Porous phosphate-based glass ceramics prepared by the sol–gel method were characterized using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and differential thermal analysis (DSC). The 48CaO–45P₂O₅–2ZnO–5Na₂O glassy system can remain fully amorphous up to 550 °C. After heat treated at 650 °C, the obtained porous bodies consisted of dense struts and macropores where β-Ca₂P₂O₇ and Na₂CaP₂O₇ phases crystallized from the glass matrix. When treated at 750 °C, Ca₄P₆O₁₉ and NaZn(PO₃)₃ precipitated homogeneously as new phases among the residual glass matrix. The material was assessed by soaking samples in phosphate-based buffer solution (PBS) solution to determine the solubility and observe apatite formation.     

The effect of TiO2 on phase separation and crystallization of glass-ceramics in CaO–MgO–Al2O3–SiO2–Na2O system

The experiments were carried out on studying the effect of phase separation on nucleation and crystallization in the glass based on the system of CaO–MgO–Al₂O₃–SiO₂–Na₂O. In the experiments, TiO₂ was chosen as nucleating agent. Three batches of 5, 8 and 10 wt% TiO₂ substitution were investigated by the techniques of DSC, XRD, FTIR and FESEM equipped with EDS. XRD and FTIR analysis indicated that the super cooled glasses were all amorphous, the heat treatment leading to nucleation would cause a disruption of silica network which followed phase separation. The phase separation followed the generation of crystal seeds Mg(Ti, Al)₂O₆. FESEM observation and EDS analysis revealed that the more TiO₂ content of glass, the more droplet separated phase and crystal seeds after nucleation heat treatment. The main crystal phase is clinopyroxene, Ca(Ti, Mg, Al)(Al, Si)O₆, of crystallized glass.     

The preparation and structural studies in the (80 − x)TeO2–20ZnO–(x)Er2O3 glass system

Er³⁺-doped tellurite glasses of the (80 ? x)TeO₂–20ZnO–(x)Er₂O₃ system (0.5 mol% ? x ? 2.5 mol%) have successfully been made by melt-quenching technique and their structure has been investigated by means of DTA and Raman spectroscopy. The DTA results show the thermal parameters; such as the glass transition temperature (T_g) and crystallization temperature (T_c) were determined. It is found that this system provides a stable and wide glass formation range in which the glass stability around 99–140 °C may be obtained. The Raman spectroscopy used the structural studies in the glass system. Two Raman shift peaks were observed around 640–670 cm^?1 and 720–740 cm^?1, which correspond to the stretching vibration mode of TeO₄ tbp and TeO₃ tp, respectively. It is found that the spectral shift in Raman spectra is depending on the Er₂O₃ content. This evolution is an indication of the changes in the basic unit of the glass structure.     

Spectroscopic properties of the 1.8 μm emission of Tm3+/Yb3+ codoped TeO2–ZnO–Bi2O3 glasses with efficient energy transfer

Tm³⁺-doped and Tm³⁺/Yb³⁺-codoped TeO₂–ZnO–Bi₂O₃ (TZB) glasses are prepared by melt-quenching method. The Judd-Ofelt intensity parameters (Ω_t t = 2, 4, 6), radiative transition rate, and radiative lifetime of Tm³⁺ are calculated based on the absorption spectra. The 1.8 μm emission of the samples is investigated under 980 nm laser excitation. The absorption, emission cross-sections, and gain coefficient of Tm³⁺:³F₄ → ³H₆ are calculated. The energy transfer processes of Yb³⁺–Yb³⁺ and Yb³⁺–Tm³⁺ are analyzed, the results show that the Yb³⁺ ions can transfer their energy to Tm³⁺ ions with large energy transfer coefficient, and a maximum efficiency of 79%.     

Magnetite nanoparticles prepared by the crystallization of Na2O–Fe2O3–B2O3–SiO2 glasses

A glass with the composition of 35Na₂O–24Fe₂O₃–20B₂O₃–20SiO₂–1ZnO (mol%) was melted, quenched, using a twin roller technique, and subsequently heat treated in the range 485–750 °C for 1–2 h. This led to the crystallization of magnetite as the sole or the major crystalline phase.Heat treatment at lower temperatures resulted in the crystallization of magnetite crystals 7–20 nm in diameter, whereas heat treatment at higher temperatures produced higher quantities of magnetite and much larger crystals. The room temperature magnetization and coercive force values were in the range of 6–57 emu g^? 1 and 0–120 Oe, respectively for the heat treated glasses.     

Preparation,crystallization behavior and magnetic properties of nanoparticles magnetic glass–ceramics in the systems Fe2O3 CoO MnO2, Fe2O3 NiO MoO3 and Fe2O3 CoO V2O5

Ferrimagnetic glass–ceramics were prepared in the systems Fe₂O₃ CoO MnO₂ (S1), Fe₂O₃ NiO MoO₃ (S2) and Fe₂O₃ CoO V₂O₅ (S3). Small amount of H₃BO₄ was added to make the melting process easier. The samples were characterized using DTA, XRD, TEM and EDX. Sequence of crystallization was studied by applying heat-treatment at 800 and 1000 °C for 4 h. CoFe₂O₄ with crystallite sizes of ≈ 14–20 nm was successfully prepared beside FeCoOBO₃ and Co₃BO₅ in S1. NiMoO₄, (FeNi₂)O₂(BO₃) and NiO with crystallite size ≈ 56–79 nm were crystallized in S2. CoFe₂O₄, FeCoOBO₃ and Co₃BO₅ with crystallite size ≈ 6–8 nm were crystallized in S3. Magnetic hysteresis cycles were analyzed with a maximum applied field of 20 kOe at room temperature. From the obtained hysteresis loops Ms records higher values for S1 and S3 and lower value for S2, while coercivity reach maximum for S2. The variable, magnetic, data range gives a wide range for different applications.     

Influence of various alkali and divalent metal oxides on phase transformations in NiO-doped glasses of the Li2O–Al2O3–SiO2–TiO2 system

Regularities of phase transformations in glasses of the Li₂O–Al₂O₃–SiO₂–TiO₂ system doped with up to 2.5 mol% of alkali- and divalent metal oxides were studied by X-ray diffraction analysis, Raman scattering and optical spectroscopy. Ni(II) ions were used as spectral probes of phase transformations because Ni(II)-ions enter the inhomogeneous regions formed during the phase separation and crystallization, and their absorption spectra change with heat-treatment temperature reflecting formation of aluminotitanate amorphous regions, spinel nanosized crystals and β-quartz solid solutions, consequently.It was demonstrated that the technological additives do not change the sequence of the phases' formation but accelerate the liquid phase separation and crystallization. Addition of MgO and ZnO leads to increasing the temperature range of spinel precipitation. Addition of CaO, BaO and PbO results in increasing the light scattering of prepared glass-ceramics.In selection of the technological additives for decreasing the melting temperature of glass-ceramics for optical and photonic applications the influence of the additives on the structure and optical properties of the prepared material should be considered.     

Surface modification and crystallization of the BaO–B2O3–SiO2 glassy system using CO2 laser irradiation

The surface modification and crystallization process of BaO–B₂O₃–SiO₂ glass compositions when exposed to CO₂ laser irradiation was evaluated as a function of the laser power, irradiation time and surface condition. The glass surface was modified by the application of laser power exceeding 0.40 W and an irradiation time of more than 300 s. Micro-Raman and X-ray diffraction measurements revealed at high laser power the formation of β-BaB₂O₄ (β-BBO) crystalline phase. The crystallization of the irradiated region was enhanced when β-BBO micrometer sized particles were dispersed on the surface of the glass sample. The intensity of the second harmonic generation observed in the crystallized region was found to depend mainly on the condition of the glassy surface prior to glass irradiation.     

Crystallization of bismuth oxide nano-crystallites in a SiO2–PbO–Bi2O3 glass matrix

SiO₂–PbO–Bi₂O₃ glasses having the composition of 35SiO₂–xPbO–(65 ? x)Bi₂O₃ (where x = 5, 20 and 45; in mol%) have been prepared using the conventional melting and annealing method. Differential scanning calorimetry (DSC) was employed to characterize the thermal behavior of the prepared glasses in order to determine their crystallization temperatures (T_cr). It has been found that T_cr decreases with the decrease of Bi₂O₃ content. The amorphous nature of the prepared glasses as well as the crystallinity of the produced glass–ceramics were confirmed by X-ray powder diffraction (XRD) analysis. SiPbBi₂O₆ glass nano-composites, comprising bismuth oxides nano-crystallites, were obtained by controlled heat-treatment of the glasses at their (T_cr) for 10 h. Transmission electron microscopy (TEM) of the glass nano-crystal composites demonstrates the presence of cubic Bi₂O₃ nano-crystallites in the SiPbBi₂O₆ glass matrix. Nano-crystallites mean size has been determined from XRD line width analysis using Scherrer's equation as well as from TEM; and the sizes obtained from both analyses are in good agreement. These sizes varied from about 15 to 170 nm depending on the chemical compositions of parent glasses and, consequently, their structure. Interestingly, replacement of the Bi₂O₃ by PbO in the glass compositions has pronounced effect on the nature, morphology and size of the formed nano-crystallites. Decrease of the Bi₂O₃ content increases the size of the nano-crystallites, and at the lowest Bi₂O₃ extreme, namely 20 mol%, introduces minority of the monoclinic Bi₂O₄ in addition to the cubic Bi₂O₃. The crystallization mechanism is suggested to involve a diffusion controlled growth of the bismuth oxide nano-crystallites in the SiPbBi₂O₆ glass matrix with the zero nucleation rate.     

The role of coordination and valance states of tungsten ions on some physical properties of Li2O–Al2O3–ZrO2–SiO2 glass system

A series of Li₂O–Al₂O₃–ZrO₂–SiO₂ glasses doped with different concentrations of WO₃ (0 to 5.0 mol.%) have been synthesized. Differential thermal analysis of the samples indicated increasing glass forming ability with the increasing concentration of WO₃ in the glass matrix. A variety of spectroscopic (optical absorption, IR, Raman and ESR) and dielectric properties (over a range of frequency and temperature) of these glasses have been investigated. The optical absorption and ESR spectral studies have pointed out that a part of tungsten ions do exist in W⁵⁺ state in addition to W⁶⁺ state especially in the samples containing low concentration of WO₃. The IR and Raman spectral studies have suggested that there is a decreasing degree of disorder in the glass network with increase in the concentration of WO₃. The values of dielectric parameters viz., dielectric constant, loss and ac conductivity at any frequency and temperature are observed to decrease as the concentration of WO₃ is increased. Such changes have been attributed to decrease of redox ratio or decreasing proportions of W⁵⁺ ions that act as modifiers in the glass network. The quantitative analysis of the results of ac conductivity and dielectric properties have indicated an increase in the insulating character of the glasses with the concentration of WO₃; this is attributed to the presence of tungsten ions largely in W⁶⁺ ions that participate in the glass network forming with WO₄ structural units.     

The effect of composition and temperature on the amount and type of nanoferrite particles inserted in Fe2O3–ZnO–MgO–SiO2 glass–ceramics

Glass–ceramics with the composition 2Fe₂O₃.1ZnO.1MgO.96SiO₂ [4ZnMgFe] and 2Fe₂O₃.2ZnO.3MgO.93SiO₂ [7ZnMgFe] (mol%) were prepared using the sol–gel method. X-ray diffraction (XRD), scanning electron microscopy (SEM), electron diffraction (ED) and Mössbauer spectroscopy (MS) were used to investigate the glass–ceramics structure. The samples contain ferrite nanoparticles embedded in a glass matrix. However, zinc ferrite nanoparticles seems to be the preferential crystalline phase formed. The amount of ferrite particles depends on treatment temperature and sample composition. The Mössbauer spectroscopy measurements show that ferrite nanoparticles can exhibit a ferrimagnetic behaviour combined with superparamagnetism.     

Ultra-high thermal expansion glass–ceramics in the system MgO/Al2O3/TiO2/ZrO2/SiO2 by volume crystallization of cristobalite

Glasses in the system MgO/Al₂O₃/TiO₂/ZrO₂/SiO₂ with and without the addition of As₂O₃ and Sb₂O₃ were thermally treated. Up to a temperature of 950 °C, this resulted in the formation of ZrTiO₄, sapphirine and high quartz solid solution. Annealing at higher temperatures led to the formation of low quartz solid solutions, ZrTiO₄ and sapphirine. This resulted in a continuous increase of density, hardness, fracture toughness and thermal expansivity. In the glass doped with As₂O₅ and Sb₂O₅ annealing temperatures >1000 °C resulted in the formation of cristobalite instead of quartz. Then the density, hardness and strength decreased again, while the fracture toughness (up to 2.8 MPa m^1/2) and the thermal expansion coefficient increased strongly. In the dilatometric curves, a steep increase in expansion is observed in the temperature range from 100 to 200 °C, which is attributed to the transformation of low cristobalite to high cristobalite. The mean linear thermal expansion coefficient (25–200 °C) is 20 × 10^?6 K^?1 and the largest up to now reported in the literature for alkali-free silicate glass–ceramics.     

Thermal and optical properties of TeO2–ZnO–BaO glasses

We report the results of a systematic study of the thermal and optical properties of a new family of tellurite glasses, TeO₂–ZnO–BaO (TZBa), as a function of the barium oxide mole fraction and compare them with those of TeO₂–ZnO–Na₂O (TZN). The characteristic temperatures of this new glass family (glass transition, T_g, crystallization, T_x, and melting, T_m) increase significantly with BaO content and the glasses are more thermally stable (greater ΔT = T_x ? T_g) than TZN glasses. Relative to these, Raman gain coefficient of the TZBa glasses also increases by approximately 40% as well as the Raman shift from ~ 680 cm^? 1 to ~ 770 cm^? 1. The latter shift is due to the modification of the glass with the creation of non-bridging oxygen ions in the glass network. Raman spectroscopy allows us to monitor the changes in the glass network resulting from the introduction of BaO.