Stabilisation of ultra-high molecular weight polyethylene with Vitamin E

Ultra-high molecular weight polyethylene (UHMWPE) has been the material of choice for load-bearing articular components used in total joint arthroplasty in the past 30 years. However, the durability of the whole implant has often been compromised by oxidation of UHMWPE components. Since the use of a suitable, biocompatible stabilizer would minimize this inconvenience, the possibility of adding synthetic Vitamin E to medical grade UHMWPE is currently under investigation.In the present work, medical grade UHMWPE was blended with 0.05, 0.1 or 0.5 w/w% of α-tocopherol and consolidated by compression moulding. Small blocks of reference UHMWPE and of each blend were then gamma irradiated to 30 or 100 kGy. FTIR spectroscopy was used to monitor changes in both the polymer and the additive. Thin sections of virgin and α-tocopherol doped UHMWPE irradiated and unirradiated were aged in a ventilated oven at 90 °C and the kinetic of oxidation was followed by FTIR. In addition, CL-imaging curves were recorded at 180 °C on both irradiated and unirradiated samples.Phenol loss is observed in all the α-tocopherol doped samples upon irradiation. Hypotheses on the rearrangements of the additive structure include the formation of quinonoid products. Nevertheless, all the additive-containing samples exhibit better oxidation resistance compared to the virgin material, indicating stabilizing activity of the α-tocopherol derivatives.     

Pecularities of the thermomechanical behaviour of ultra-high molecular weight linear polyethylene and its blends with linear polyethylene of normal molecular weight

Ultra-high molecular weight polyethylene UHMWPE (M _w=4 · 10⁶,I _s=O g/ 10 min), high density polyethylene of normal molecular weight NMWPE (I _s= 4.8 g/10 min) and their blends have been investigated by means of thermomechanical loading in constant and impulse regime. It has been established that after melting, NMWPE passes to a viscous-liquid state. After melting at 138 °C UHMWPE passes to a high-elastic state. The transition of UHMWPE to a viscous-liquid state takes place at temperatures higher than 180 °C and is accompanied by a high-elastic reversible deformation. The blends of UHMWPE with 10 and 20 mass % of NMWPE show a plateau on the thermomechanical curves, corresponding to a high-elastic state, in a shorter temperature range where the deformation is greater. The blends containing the higher percent of NMWPE show thermomechanical curves lacking such a plateau. All blends are characterized by a singular thermomechanically defined temperature of melting, which increases with increase of UHMWPE content. The existence of the high-elastic state in the curves of UHMWPE and its blends containing NMWPE less than 30 mass % above their melting temperatures is explained by the high degree of physical crosslinking of UHMWPE.     

Lifetime of alkyl macroradicals in irradiated ultra-high molecular weight polyethylene

The interaction of UHMWPE with an electron beam in vacuum and in the presence of oxygen has been investigated. UHMWPE irradiated to various doses was examined with Electron Paramagnetic Resonance (EPR) and Fourier Transform infra-red (FTIR) spectroscopies. EPR was used to explore the nature of radicals produced in UHMWPE upon irradiation and to follow their decay as a function of time. Hydroperoxides formation and distribution throughout the samples were studied with FTIR spectroscopy.A correlation between the rate of decay of macroradicals and that of hydroperoxide formation has been proposed. Accordingly, the lifetime of secondary alkyl macroradicals in the amorphous phase of the polymer was found to range approximately from 3 to 10 h.     

Sensitive phase separation behavior of ultra-high molecular weight polyethylene in polybutene

Thermally induced phase separation (TIPS) has prompted a great deal of interest, especially as an effective approach to fabricate ultra-high molecular weight polyethylene (UHMWPE) microporous membranes. However, the existing utilized diluents for the TIPS process of UHMWPE suffer from environmental and health issues. Herein, we utilized low molecular weight polybutene (PB) bearing similar structure with liquid paraffin (LP) but inferior miscibility with UHMWPE relative to UHMWPE/LP blend, as a diluent for the TIPS process of UHMWPE. The phase separation behavior of UHMWPE/PB blends were investigated by the combination of rheological measurements, optical microscopy as well as differential scanning calorimeter (DSC). The results suggest that PB is fully miscible with UHMWPE at elevated temperature, but yielding a more sensitive phase separation behavior in respect to LP in TIPS process, because PB has weaker interaction with UHMWPE. The Jeziorny method analysis indicates that the crystallization mechanism of UHMWPE/LP blends is in line with that of UHMWPE/PB blends, which includes nucleation and growth as well as their dynamic competition. Moreover, compared to those of UHMWPE/LP blends, UHMWPE/PB blends display higher TIPS temperature and faster TIPS rate along with faster overall crystallization rate, further demonstrating that PB can accelerate phase separation rates and enhance the efficiency of TIPS process.     

Schiff base derivatives of titanium(IV) and zirconium(IV)

The reactions of a few bifunctional and tridentate Schiff bases with titanium-(IV) and zirconium(IV) isopropoxides in equimolar and bimolar ratios are described. The resulting compounds have been obtained in almost quantitative yields and are of the general formulae M(SB)_x(OPrⁱ)_4?2X (where M = Ti or Zr; SB- = anion of the Schiff base SBH₂ and x = 1 or 2). Their molecular weights have been determined ebullioscopically and IR spectra recorded.     

Electronic and ESR spectroscopic study of thiocyanate-containing coordination compounds of titanium(III) in alcohol solutions

In an investigation of electronic and ESR spectra, it has been established that titanium(III) with the thiocyanate ion (in ethanol) forms distorted tetrahedral and octahedral complexes. The tetrahedral compounds, which are hydroxo complexes of titanium(III) that contain one hydroxyl group and three thiocyanate ions in the coordination sphere, give signals in the ESR spectra with g_o=1.960, A_o=15.0·10^–4 cm^–1 g=1.958, A ^Ti =26.4·10^–4cm^–1, g= 1.691, A^Ti=9.0·10^–4 cm^–1. In the ESR spectra of liquid solutions, additional splitting on the nitrogen atoms is manifested(A _o ^N =2.2·10^–4 cm^–1), which indicates bonding of thiocyanate ions through the nitrogen atom. The pseudo-octahedral complexes of titanium(III), containing from two to six thiocyanate ions in the coordination sphere, are characterized by d-d absorption bands in the 520–590 nm region; and at 77°K, they give anisotropic ESR signals. On the basis of the temperature dependences of the equilibrium constants for the reaction of conversion of the tetrahedral complexes to the octahedral complexes, and also the lifetimes of the tetrahedral complexes, values have been estimated for the heat of reaction (H=26.8 kJ/mole) and the entropy change (S=–1.66 kJ/mole·°K) of the equilibrium process, and also the activation energy for the reaction of titanium(III) thiocyanate formation (E=37 kJ/mole).Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 21, No. 5, pp. 560–567, September–October, 1985.     

Ammonolysis of mono(pentamethylcyclopentadienyl) titanium(IV) derivatives

Ammonolyses of mono(pentamethylcyclopentadienyl) titanium(IV) derivatives [Ti(eta5-C5Me5)X3] (X = NMe2, Me, Cl) have been carried out in solution to give polynuclear nitrido complexes. Reaction of the tris(dimethylamido) derivative [Ti(eta5-C5Me5)(NMe2)3] with excess of ammonia at 80-100 degrees C gives the cubane complex [[Ti(eta5-C5Me5)]4(mu3-N)4] (1). Treatment of the trimethyl derivative [Ti(eta5-C5Me5)Me3] with NH3 at room temperature leads to the trinuclear imido-nitrido complex [[Ti(eta/5-CsMes)(mu-NH)]3(mu3-N)] (2) via the intermediate [[Ti(eta5-C5Me5)Me]2(mu-NH)2] (3). The analogous reaction of [Ti(eta5-C5Me5)Me3] with 2,4,6-trimethylaniline (ArNH2) gives the dinuclear imido complex [[Ti(eta5-C5Me5)Me])2(mu-NAr)2] (4) which reacts with ammonia to afford [[Ti(eta5-C5Me5)(NH2)]2(mu-NAr)2] (5). Complex 2 has been used, by treatments with the tris(dimethylamido) derivatives [Ti(eta5-C5H5-nRn)(NMe2)3], as precursor of the cubane nitrido systems [[Ti4(eta5-C5Me5)3(eta5-C5H5-nRn)](mu3-N)4] [R = Me n = 5 (1), R = H n = 0 (6), R = SiMe3 n = 1 (7), R = Me n = 1 (8)] via dimethylamine elimination. Reaction of [Ti(eta5-C5Me5)Cl3] or [Ti(eta5-C5Me5)(NMe2)Cl2] with excess of ammonia at room temperature gives the dinuclear complex [[Ti2(eta5-C5Me5)2Cl3(NH3)](mu-N)] (9) where an intramolecular hydrogen bonding and a nonlineal nitrido ligand bridge the "Ti(eta5-C5Me5)Cl(NH3)" and "Ti(eta5-C5Me5)Cl2" moieties. The molecular structures of [[Ti(eta5-C5Me5)Me]2 (mu-NAr)2] (4) and [[Ti2(eta5-C5Me5)2Cl3(NH3)](mu-N)] (9) have been determined by X-ray crystallographic studies. Density functional theory calculations also have been conducted on complex 9 to confirm the existence of an intramolecular N-H...Cl hydrogen bond and to evaluate different aspects of its molecular disposition.     

Synthesis of copper(II) coordination compounds with benzoxazine derivatives

Copper(II) complexes with 1,2-dihydro-4H-3,1-benzoxazine (HL) derivatives, CuLOH, were prepared by anodic electrosynthesis. The use of an amalgamated copper anode resulted in an increase in the electrosynthesis rate. It follows from the IR spectra of the products that the benzoxazine ring in the ligand molecule is opened upon complexation, while a six-membered chelate ring involving the oxygen atom of the deprotonated phenol group and the imine nitrogen atom is formed.     

Large ultra-high molecular weight polyethylene spherical particles produced by AlR3 activated half-sandwich chromium(III) catalysts

A series of half-sandwich pentamethylcyclopentadienyl chromium(III) complexes bearing a salicylaldiminato ligand, Cp*[2-R(1)-4-R(2)-6-(CH==NR(3))C(6)H(2)O]CrCl [R(1) = (i)Pr (1, 4), (t)Bu (2, 3, 5), Ad (6); R(2) = H (1, 2, 3), (t)Bu (4, 5, 6); R(3) = (i)Pr (1, 2, 5, 6), (t)Bu (3, 4)], were synthesized. All complexes were characterized by elemental analyses and the structures of complexes 1-4 and 6 were determined by X-ray diffraction analysis. These complexes adopt a pseudo-octahedral coordination environment with a three-legged piano stool geometry. Upon activation with a small amount of AlR(3), complexes 1-6 all catalyze the polymerization of ethylene in a quasi living fashion with good to high catalytic activity under mild conditions and produce ultra-high molecular weight polyethylene as spherical particles with a diameter of 1-6 mm. The catalytic activity of these complexes and the molecular weight of the produced polyethylene can be tuned in a broad range by changing the R(1), R(2), and R(3) groups as well as the AlR(3) cocatalyst. It was found that complex 6 with R(1) = Ad, R(2) = (t)Bu, and R(3) = (i)Pr shows the highest catalytic activity and produces polyethylene with the highest molecular weight.     

Influence of chemical crosslinking on the creep behavior of ultra-high molecular weight polyethylene fibers

In this study, the effect of chemical crosslinking on the creep behavior of high-strength fibers, obtained by gel-spinning and subsequent hot-drawing of ultra-high molecular weight polyethylene (UHMWPE), is examined. In the first part of the paper, the general aspects of the creep behavior of these fibers are discussed. The second part deals with UHMWPE fibers that are crosslinked by means of a) chlorosulfonation and b) dicumyl peroxide treatment followed by UV irradiation. The latter technique leads to an improvement of the creep resistance of the UHMWPE fibers without affecting their high tensile strengths. In spite of the fact that the network formation is fairly high, the creep cannot be completely removed. The results indicate that the creep process in UHMWPE fibers is associated with a deformation mechanism in the crystalline regions of the fiber, which are not affected by chemical crosslinking.     

Structure and properties of gel-spun ultra-high molecular weight polyethylene fibers with high gel solution concentration

The gel-spun ultra-high molecular weight polyethylene(UHMWPE) fibers were prepared at the industrial production line with different gel solution concentrations of 15 wt%, 18 wt% and 24 wt%. The difference in ultimate structure and mechanical properties of UHMWPE fibers for different gel solution concentrations were analyzed by tensile testing, differential scanning calorimetry(DSC), wide angle X-ray diffraction(WAXD) and small angle X-ray scattering(SAXS). With the increase of gel solution concentration, the ultimate mechanical properties of UHMWPE fibers were decreased and the crystallization and orientation of UHMWPE fibers became inferior. Besides, both the average shish length(〈L _(shish)〉) and shish misorientation(B_φ) of UHMWPE fibers were decreased with the increase of gel solution concentration. In addition, the appropriate increase of spinning temperature led to the further optimization of the ultimate structure and mechanical properties of UHMWPE fibers.     

Investigation of the rheological and mechanical behavior of Polypropylene/ultra-high molecular weight polyethylene compounds related to new online process control

Ultra-high molecular weight polyethylene (UHMWPE) is a high performance material that has excellent wear and impact strength compared to other polymers. Due to its chemical structure and molecular mass, UHMWPE is difficult to handle on standard extrusion systems. In this paper, the compounding, rheological, and mechanical behavior of different Polypropylene (PP)/UHMWPE blends were investigated. Raw materials were blended on a co-rotating twin screw extruder. The shear and extensional viscosity of polymer blends were investigated using an inline rheometer. Mechanical and rheological properties were presented for various UHMWPE loadings, and correlations between mechanical and rheological data were examined.     

New coordination compounds of Cd(AsF6)2 with HF and XeF2

Two new coordination compounds of cadmium with HF and XeF2 as ligands have been synthesized. Solid white [Cd(HF)](AsF6)2 is obtained from an anhydrous HF (aHF) solution of Cd(AsF6)2. It crystallizes in a monoclinic P2(1)/c space group with a = 9.4687(14) A, b = 9.2724(11) A, c = 10.5503(18) A, beta = 104.887(7) degrees, and Z = 4. The coordination sphere of Cd consists of 7 + 2 fluorine atoms, which are in a capped trigonal-prismatic arrangement. The reaction between Cd(AsF6)2 and XeF(2 in aHF yields a solid white product at room temperature having the composition [Cd(XeF2)4](AsF6)2 after the excess XeF2 and solvent have been removed under dynamic vacuum. [Cd(XeF2)4](AsF6)2 crystallizes in the orthorhombic space group P2(1)2(1)2(1), with a = 8.6482(6) A, b = 13.5555(11) A, c = 16.6312(14) A, and Z = 4. The coordination sphere of Cd consists of eight fluorine atoms, which are at the corners of a trigonal prism with two capped side faces.