Tuning the hemilabile behaviour of a thioether–pyrazole ligand on Pd(II) complexes with diphosphines

The coordination mode of thioether–pyrazole ligand, 1,5-bis(3,5-dimethyl-1-pyrazolyl)-3-thiapentane (bdtp) and 1,8-bis-(3,5-dimethyl-1-pyrazolyl)-3,6-dithiaoctane (bddo) ligands, in Pd(II) complexes containing a diphosphine ligand is determined by subtle changes in size of the bridge between the two phosphorus atoms. The ¹H NMR and ³¹P{¹H} NMR at variable temperature in acetonitrile solution prove that the hemilabile character of the bdtp ligand depend on the diphosphine ligand. Thus, while in [Pd(bdtp)(dppe)](BF₄)₂ [1](BF₄)₂ the thioether group not participate in the Pd(II) coordination sphere, two isomers with different coordination (P₂N₂ vs P₂NS) are in equilibrium in [Pd(bdtp)(dppp)](BF₄)₂ [2](BF₄)₂ acetonitrile solution. For complexes [Pd(bddo)(dppe)](BF₄)₂ [3](BF₄)₂ and [Pd(bddo)(dppp)](BF₄)₂ [4](BF₄)₂, only the coordination N,N is observed.     

Synthesis and structure of novel copper(II) complexes with pyrazole derived ligands and metal–ligand interaction in solution

Two new ligands of the coumarin type have been synthesized and characterized by ¹H, ¹³C NMR, IR and MS. The crystal and molecular structures of ligand 2, determined by the X-ray diffraction method, are presented. With copper(II) these ligands create solid complexes of the type CuLCl₂, where L is 5-(2-hydroxybenzoyl)-3-methyl-1-(2-pyridinyl)pyrazol-4-carboxylic acid methyl ester (2) or 3-methyl-1-(2-pyridinyl)-1H-chromene[4,3-c]pyrazol-4-on (3). The new copper(II) complexes have been characterized by elemental analysis and solid state FT-IR. The protonation constants of ligands 2 and 3 have been determined in 5% v/v 1,4-dioxane–water solution (25 °C). The coordination modes in the complexes with copper(II) are discussed for 2 on the basis of potentiometric and UV–Vis data.     

Investigations on the redox behaviour of manganese in manganese(II)–saccharin and manganese(II)–saccharin–1,10-phenanthroline complexes

The redox behaviour of manganese system in Mn–Sac and Mn–Sac–Phen complexes were studied using cyclic voltammetry technique at glassy carbon electrode (GCE) in 0.1 M KCl electrolyte. The CV of Mn–Sac solution is more or less similar to that of uncoordinated Mn (in MnCl₂) accept slight difference in peak position and peak current. The presence of secondary ligand phenanthroline (in Mn–Sac–Phen complex) changes the CV of Mn system largely compared to those of uncoordinated Mn and Mn–Sac. The redox system is irreversible in Mn–Sac and quasi-reversible in Mn–Sac–Phen complex. The effect of concentration and pH on the redox behaviour of Mn system have been studied for both the complexes.     

Electroreduction of Pd(II) Complexes with α-Alanine on a Palladium Electrode

The kinetics of electroreduction of Pd(II) complexes with -alanine, Pd(ala)₂, is studied on a rotating Pd disk electrode in solutions of pH 8–13 containing large excess of -alanine and various supporting electrolytes (NaF, Na₂SO₄, NaClO₄). On a Pd electrode, complexes Pd(ala)₂ undergo reduction at potentials much more negative than on an Hg electrode. This is attributed to the chemisorption of water on the Pd electrode, which hampers adsorption of Pd(ala)₂ that take part in the slow electrochemical stage. As with the Hg electrode, perchlorate ions hinder the Pd(ala)₂ reduction on a Pd electrode. Studying adsorption of Pd(ala)₂ on a Pd electrode is hampered by parallel processes of hydrogen adsorption and absorption.     

Quantum chemical calculations of stability constants: study of ligand effects on the relative stability of Pd(II)�Cpeptide complexes

Replacement of [Pd(H₂O)₄]²⁺ by cis-[Pd(en)(H₂O)₂]²⁺, [PdCl₄]^2?, and [Pd(NH₃)₄]²⁺ on the hydrolytic cleavage of the Ace-Ala-Lys-Tyr-Gly?CGly-Met-Ala-Ala-Arg-Ala peptide is theoretically investigated by using different quantum chemical methods both in the gas phase an in water solution. First, we carry out a series of validation calculations on small Pd(II) complexes by computing high-level ab initio [MP2 and CCSD(T)] and Density Functional Theory (B3LYP) electronic energies while solvent effects are taken into account by means of a Poisson-Boltzmann continuum model coupled with the B3LYP method. After having assessed the actual performance of the DFT calculations in predicting the stability constants for selected Pd(II)-complexes, we compute the relative free energies in solution of several Pd(II)?Cpeptide model complexes. By assuming that the reaction of the peptide with cis-[Pd(en)(H₂O)₂]²⁺, [Pd(Cl)₄]^2?, and [Pd(NH₃)₄]²⁺ would lead to the initial formation of the respective peptide-bound complexes, which in turn would evolve to afford a hydrolytically active complex [Pd(peptide)(H₂O)₂]²⁺ through the displacement of the en, Cl^?, and NH₃ ligands by water, our calculations of the relative stability of these complexes allow us to rationalize why [Pd(H₂O)₄]²⁺ and [Pd(NH₃)₄]²⁺ are more reactive than cis-[Pd(en)(H₂O)₂]²⁺ and [PdCl₄]^2? as experimentally found.     

Reactivity of nickel(II) and copper(II) complexes of a β-aminohydrazone ligand with pyridine-2-aldehyde: macrocyclization vs unprecedented pyrazole ring synthesis via C-C bond-forming reaction

The synthesis and characterization of a mononuclear nickel(II) complex [Ni(L(2))](ClO(4))(2) (1) and an analogous mononuclear copper(II) complex [Cu(L(2))](ClO(4))(2) (2) of a 15-membered azamacrocycle (L(2) = 3-(2-pyridyl)-6,8,8,13,13,15-hexamethyl-1,2,4,5,9,12-hexaazacyclopentadeca-5,15-diene) are reported. The macrocyclic ligand is formed during the reaction of 4,4,9,9-tetramethyl-5,8-diazadodecane-2,11-dione dihydrazone (L(1)) with pyridine-2-aldehyde (PyCHO) templated by metal ions. The X-ray crystal structure of 1 exhibits a distorted square-pyramidal coordination geometry, where the metal ion sits in the macrocyclic cavity and the pendant pyridine group of L(2) occupies the axial position. While 1 is stable in the presence of an excess of PyCHO, 2 reacts further with copper(II) salt and PyCHO to form a mononuclear copper(I) complex, [Cu(H(2)L(3))](ClO(4))(3) (3). The structure of the complex cation of 3 reveals a distorted tetrahedral coordination geometry at the copper center with a pseudo 2-fold screw axis. A two-dimensional (2D) polymeric copper(II) complex, {[Cu(2)(L(4))(2)](ClO(4))(2)}(n) (4) is obtained by reacting complex 2 (or [Ni(L(1))](ClO(4))(2)) with copper(II) perchlorate and pyridine-2-aldehyde in a methanol-water solvent mixture. Complex 4 is also obtained by treating 3 with copper(II) perchlorate and pyridine-2-aldehyde in the presence of a base. The X-ray structural analysis of 4 confirms the formation of a pyrazolate bridged dimeric copper(II) complex. The extended structure in the solid state of 4 revealed the formation of a 2D coordination polymer with the dimeric core as the repeating unit. The ligand (HL(4)) in 4 is a 3,4,5-trisubstituted pyrazole ring formed in situ via C-C bond formation and represents an unprecedented transformation reaction.     

Synthesis of Co–Pd alloys by co-electroreduction of aquachloro-cobalt(II) and palladium(II) complexes

The work presents results of the studies on the synthesis of Co–Pd alloys from acid electrolytes containing chloride ions. The main aim of the tests was to identify reactions responsible for alloy formation and to determine an influence of the electrolysis parameters, i.e. working electrode potential, electrolyte composition and temperature on the composition of the resulted alloy coatings. Electrochemical investigations were performed by applying cyclic voltammetry (CV) combined with electrochemical quartz crystal microbalance (EQCM). The electrolyte composition was selected based on a thermodynamic analysis and spectrophotometric tests which were described in our previous papers [1, 2]. They allowed determination of equilibrium distribution of the metals complex forms and a stability analysis of the electrolyte. The alloys were synthesized within the potential range from ?0.7 to ?1.1 V. The tests indicate a possibility of alloys synthesis already at the potential range 相似文献   

Synthesis and X-ray structure of platinum(II), palladium(II) and copper(II) complexes with pyridine–pyrazole ligands: Influence of ligands’ structure on cytotoxic activity

The new pyrazole ligand 5-(2-hydroxyphenyl)-3-methyl-1-(2-pyridylo)-1H-pyrazole-4-phosphonic acid dimethyl ester (2a) has been used to obtain a series of platinum(II), palladium(II) and copper(II) complexes (3a–7a) as potential anticancer compounds. The molecular structures of the platinum(II) and copper(II) complexes 3a and 6a have been determined by X-ray crystallography. The cytotoxicity of the phosphonic ligand 2a and its carboxylic analog 2b as well as their complexes has been evaluated on leukemia and melanoma cell lines. Copper(II) complexes were found to be more efficient in the induction of melanoma cell death than the platinum(II) or palladium(II) complexes. Cytotoxic effectiveness of compound 7b against melanoma WM-115 cells was two times better than that of cisplatin. The reaction of compound 5b with 9-methylguanine has been studied.     

Metal assisted deprotonation of a β-phosphonato-phosphine ligand. X-ray structure of Pd(II) complexes with new P,O donor ligands

The new diethyl-{(diphenylphosphino)phenyl}methylphosphonate ligand, rac-Ph₂PCH(Ph)P(O)(OEt)₂ 1, has been prepared and coordinated to a Pd(II) metal centre to form P,O chelates involving P(III) and P(V) centres, as established by X-ray diffraction of cis-[Pd{Ph₂PCH(Ph)P(O)(OEt)₂-κ²-P,O }₂](BF₄)₂ 2. Deprotonation of P-bound 1 led to the first anionic β-phosphonato-phosphine P,O chelate, which was characterised by X-ray diffraction in complex [(dmba)Pd{Ph₂PC(Ph)PO(OEt)₂-κ²-P,O }] 4. To cite this article: X. Morise et al., C.R. Chimie 6 (2003) 000–000.     

Effects of metal–ligand coordination on the self-assembly behaviour of a crown ether functionalised perylenetetracarboxylic diimide

A novel perylenetetracarboxylic diimide (PDI) derivative, N,N′-di(4′-benzo-15-crown-5-ether)-1,7-di(4-tert-butyl-phenoxy)perylene-3,4;9,10-tetracarboxylic diimide (CRPDI), has been synthesised and characterised. Dimerisation of CRPDI is induced by the presence of K⁺ in CHCl₃ or spontaneously occurs in methanol, as revealed by absorption and emission spectroscopy. In particular, the formation of co-facial dimer in the presence of K⁺ proceeds in a three-stage process, as indicated by absorption spectroscopy. The belt- and rope-like nanostructures of CRPDI fabricated from methanol and CHCl₃ solution in the presence of K⁺ are obtained by scanning electron microscopy. Furthermore, the conductivity of the rope-like nanostructures from the cation-induced dimeric species is more than ca. 1 order of magnitude higher than the belt-like nanostructures from the solvent-induced dimeric species. The present result represents the further effort towards realisation of controlling and tuning the morphology of self-assembled nanostructures of PDI derivatives through molecular design and synthesis. It will be valuable for the design and preparation of PDI-based nano-(opto)electronic devices with good performance due to the close relationship between the molecular ordering and dimensions of nanostructures and the performance of nanodevices.     

An unprecedented coordination mode of the orotate ligand in novel polynuclear cadmium(II)–orotate complexes

Two novel carboxylate-bridged Cd(II)–orotate polynuclear complexes with 2-(2-ethylamino)pyridine (2-etapy), [Cd(μ-HOr)(2-etapy)]_n (1), and N,N-diethylethylenediamine (N,N-eten) ligands, {[Cd(μ-HOr)(H₂O)(N,N-eten)]·H₂O}_n (2) (H₃Or = orotic acid), have been synthesized and characterized by TGA–evolved gas analysis (TGA–EGA), IR spectroscopy and single crystal X-ray diffraction techniques. The orotate ligand acts as a bridging ligand with two different coordination modes, showing an unprecedented tetradentate coordination mode. The HOr ligand simultaneously chelates Cd(II) ions through the carboxylate oxygen, deprotonated pyrimidine nitrogen atoms and carboxyl oxygen atoms as a tetradentate ligand in 1. In complex 2, the HOr ligand bridges two Cd(II) ions through the carboxylate oxygen and deprotonated pyrimidine nitrogen atoms and oxygen atom of a carboxylate group of a neighbouring complex unit. Three-dimensional (3D) supramolecular structures are generated by hydrogen-bonding, and π···π and C–H···π interactions between the closest chains in both complexes.     

Syntheses,characterization, X-ray crystal structures and emission properties of copper(II), zinc(II) and cadmium(II) complexes of pyridyl–pyrazole derived Schiff base ligand – Metal selective ligand binding modes

The varying coordination modes of the title ligand, L [5-methyl-1-(pyridin-2-yl)-N′-[pyridin-2-ylmethylidene]pyrazole-3-carbohydrazide] towards the different metal centers is reported by preparation and characterization of Cu(II), Zn(II) and Cd(II) complexes, [Cu(L)NO₃.H₂O](NO₃) (1) [Zn(L)₂](ClO₄)₂·2DMF (2) and [Cd(L)(I)₂] (3) respectively. In 1, the neutral ligand serves as tetradentate 4 N donor where both pyridine and pyrazole nitrogen atoms of pyridyl–pyrazole part are coordinatively active, leaving the carbonyl oxygen of the carbohydrazide part inactive. The same pyridine and pyrazole N atoms remain abstained from the coordination process towards the Zn(II) and Cd(II) metal centers. For 2 and 3 the ligand behaves as a tridentate NNO donor where the two nitrogen atoms come from azomethine, pyridine of pyridine-2-carbaldehyde parts and O from carbonyl oxygen atoms (carbohydrazide part). The complex 1 and 2 are distorted octahedral while complex 3 adopts distorted square pyramidal geometry. All the complexes are X-ray crystallographically characterized.     

Two-photon-excited fluorescence of zinc(II), cadmium(II) complexes containing phenothiazine ligand

Shortly after the experimental verification of two-photon absorption by Kaiser et al.[1] with aCaF2:Eu2+ crystal in 1961, two-photon processes have been used to create a number of chemical or physical processes including optical data storage[2], lithographic fabrication[3], and fluorescence imaging[4]. In fluorescence imaging, two-photon excitation (TPE) has developed as an importantalternative to the traditional one-photon excitation (OPE) in the fluorescence microscopy and spectroscopy[5,…     

Palladium complexes with biological ligands—I. Equilibrium and reaction mechanism of Pd(II) complexes with ethionine

An equilibrium study has been carried out on the interaction of ethionine(eth) with Pd(II) in aqueous solution at I = 0.16 M (Cl⁻ and 25°C using potentiometic methods. It has been concluded that five complex species exist in the pH range 2.8–4.8. these species are: PdCl₃(Eth0H⁰₂, PdCl₂(Eth)⁻, PdClOH(Eth)⁻, Pd(Eth)₂(H)²⁺₂ and Pd(Eth)⁰₂. In addition, the stopped-flow method has been used to study the reaction kinetics of Pd(II) with Eth. Three kinetic steps were observed in the pH range 1–5.5. These steps are dependent on the total concentration of Eth (T_Eth) as well as the pH of the medium. The observed pseudo-first order rate constants for the three reaction kinetic steps at constant pH are expressed empirically by kⁱ_obs = m_i + m′_iT_Eth. The parameters m_i and m′_i are pH-dependent. It has been concluded that PdCl²⁻₄ and PdCl₂OH²⁻ species play an important role in the complex formation reactions with Eth. The data were interpreted in terms of the complex species obtained from the equilibrium study. cis-trans substitution reactions have been suggested to account for some kinetic steps.     

Rhodium(I) complexes with the 2,2′-bipyrimidine ligand

Mono- and dinuclear rhodium(I) complexes of formulae [Rh(L₂)(bipym)]⁺ and [{Rh(L₂)}₂(μ-bipym)]²⁺ [L₂ = diolefin or (CO)₂] have been prepared and their catalytic activity in hydrogen-transfer reactions explored. The heterodinuclear [Cl₂Pd(μ-bipym)Rh(tfb)]ClO₄ complex was obtained by reacting [Rh(tfb)(bipym)]⁺ with [PdCl₂(cod)] or alternatively from [Rh(tfb)(acetone)_x]⁺ with [PdCl₂(bipym)]. Ion-pair complexes of formulae [Rh(diolefin)(bipym)]⁺ [RhCl₂(diolefin)]₋ (diolefin = cod, nbd or tfb) were prepared by adding bipym to acetone suspensions of [RhCl(diolefin)]₂.     

Coordination geometries and crystal structures of cadmium(II) complexes with a new amino alcohol (NN′O) ligand

The new ligand 2-(2-(2-hydroxyethylamino)ethylamino)cyclohexanol, (HEAC), was prepared under microwave conditions through ring opening of cyclohexene oxide with 2-(2-amino-ethylamino)ethanol. Its cadmium(II) complexes [Cd₂(HEAC)₂(μ-Cl)₂Cl₂] (1) and [Cd(HEAC)₂][CdI₄] (2) were identified by elemental analysis, FT-IR, Raman, ¹H NMR spectroscopies, and single-crystal X-ray diffraction. HEAC formed 1?:?1 M?:?L complexes with cadmium chloride and cadmium iodide. Complex 1 crystallized as a dimer with two asymmetrically bound bridging Cl^? and a terminally coordinated Cl^? on each metal. The geometry around the cadmiums in 1 with four five-membered chelate rings and four Cl^? ligands is distorted octahedral for each Cd(II). The cyclohexanol OH of each ligand forms intramolecular hydrogen bonds. In 2, the coordination numbers for cadmium in [Cd(HEAC)₂]²⁺ and [CdI₄]^2? moieties are six and four, respectively. In [Cd(HEAC)₂]²⁺ each ligand coordinates through two N- and one O-donors, leading to a distorted octahedral geometry. The geometry of [CdI₄]^2? in 2 is slightly distorted tetrahedral. The protonation equilibrium constants of the two secondary amino groups in HEAC, determined by pH-potentiometry, were 6.26 and 9.26, respectively, at 25°C. Stability constants for this ligand with Ni(II), Cu(II), and Zn(II) (1?:?1 M?:?L), determined by glass-electrode potentiometry, were 7.13, 10.50, and 5.42, respectively.     

Speciation studies of mono- and binuclear Pd(II) complexes involving mixed nitrogen–sulfur donor ligand and 4,4′-bipiperidine as a linker

Pd(MME)Cl₂ complex, where MME = methionine methyl ester, was synthesized and characterized by elemental analysis and spectroscopic techniques. [Pd(MME)(H₂O)₂]²⁺ interacts with some DNA constituents giving 1 : 1 and 1 : 2 complexes. The binuclear complexes having 4,4′-bipiperidine as a linker and involving [Pd(MME)(H₂O)₂]²⁺ and DNA constituents were investigated. The results show formation of [(H₂O)(MME)Pd(Bip)Pd(MME)(H₂O)]⁴⁺. Inosine, uracil, and thymine interact with the previously mentioned complex by substitution of the two coordinated water molecules. Formation constants of all possible mono- and binuclear complexes were determined and their speciation diagrams were evaluated.     

Copper(II) and lanthanoid(III) complexes of a new β-diketonate ligand with an appended non-coordinating phenol group

New mononuclear compounds of the ligand 1-(2-hydroxyphenyl)-3-phenylpropane-1,3-dione (H₂L) with Cu(II) and several lanthanoid(III) ions, where Ln(III) = Pr, Nd, Eu, Gd, have been synthesized and characterized by spectroscopic methods and X-ray crystal structure determinations. In all compounds, the ligand coordinates in a bidentate chelating manner, using the diketone function. In the [Cu(HL)₂], the coordination geometry of Cu(II) ion is slightly distorted square-planar; two strong intramolecular (OH?O) hydrogen-bonding interactions are established between the phenolate group and the neighboring ketone function. The lanthanoid(III) compounds have the general formula [Ln(HL)₃(CH₃OH)₂] · CH₃OH · 2H₂O; the lanthanoid(III) ion (Ln) is eight-coordinated and the coordination geometry is based on a distorted square-antiprism. In addition to the intramolecular hydrogen bonding (OH?O), intermolecular hydrogen-bonding interactions are also present between the coordinated methanol molecule and the non-coordinated methanol molecule giving rise to a three-dimensional network.     

Effects of fluorine substituent on properties of cyclometalated iridium(III) complexes with a 2,2′-bipyridine ancillary ligand

Cationic cyclometalated Ir(III) complexes (Ir1-Ir5) with fluorine-substituted 2-phenylpyridine (ppy) derivatives as C^N cyclometalating ligands and 2,2′-bipyridine (bpy) as the ancillary ligand, have been synthesized and fully characterized. The influences of the number and the position of fluorine atoms at the cyclometalating ligands on the photophysical, electrochemical and oxygen sensing properties of the Ir(III) complexes have been investigated systematically. The introduction of fluorine on the C^N cyclometalating ligands of the complexes results in blue-shifts of the maximum emission wavelengths, and increases in the photoluminescence quantum yields (Φ_PL), phosphorescence lifetimes and energy gaps, compared to the non-fluorinated [Ir(ppy)₂(bpy)]⁺PF₆^? (Ir0). Among them, 2-(2,4-difluorophenyl)pyridine-derived Ir4 shows the maximum blue-shift (514 nm vs. 575 nm for Ir0) and the highest Φ_PL (50.8% vs. 6.5% for Ir0). The complex Ir3 with 2-(4-fluorophenyl)-5-fluoropyridine as C^N ligand exhibits the highest oxygen sensitivity and excellent operational stability in 10 cycles within 4000 s.