Syntheses of novel exo and endo isomers of ansa-substituted fluorophosphazenes and their facile transformations into spiro isomers in the presence of fluoride ions

Reactions of the dilithiated diols RCH2P(S)(CH2OLi)2 [R = Fc (1), Ph (2) (Fc = ferrocenyl)] with N3P3F6 in equimolar ratios at -80 degrees C result exclusively in the formation of two structural isomers of ansa-substituted compounds, endo-RCH2P(S)(CH2O)2[P(F)N]2(F2PN) [R = Fc (3a), Ph (4a)] and exo-RCH2P(S)(CH2O)2[P(F)N]2(F2PN) [R = Fc (3b), Ph (4b)], which are separated by column chromatography. Increasing the reaction temperature to -40 degrees C results in more of the exo isomers 3b and 4b at the expense of the endo isomers. The formation of the ansa-substituted compounds is found to depend on the dilithiation of the diols, as a reaction of the silylated phosphine sulfide FcCH2P(S)(CH2OSiMe3)2 (5) with N3P3F6 in the presence of CsF does not yield either 3a or 3b but instead gives the spiro isomer [FcCH2P(S)(CH2O)2 PN](F2PN)2 (6) as the disubstitution product of N3P3F6. The ansa isomers 3a and 3b are transformed into the spiro compound 6 in the presence of catalytic amounts of CsF at room temperature in THF, while 4a and 4b are transformed into the spiro compound [PhCH2P(S)(CH2O)2PN](F2PN)2 (7) under similar conditions. The novel conversions of ansa-substituted phosphazenes into spirocyclic phosphazenes were monitored by time-dependent 31P NMR spectroscopy. The effect of temperature on a transformation was studied by carrying out reactions at various temperatures in the range from -60 to +33 degrees C for 3b. In addition, compounds 3a, 3b, 4a, and 6 were structurally characterized. In the case of the ansa compounds, the nitrogen atom flanked by the bridging phosphorus sites was found to deviate significantly from the plane defined by the five remaining atoms of the phosphazene ring.     

Ansa versus spiro substitution of cyclophosphazenes: is fluorination essential for ansa to spiro transformation of cyclophosphazenes?

Fluorinated ansa substituted cyclophosphazenes endo-FcCH(2)P(S)(CH(2)O)(2)[P(F)N](2)(F(2)PN) [Fc = ferrocenyl] (1) and exo-FcCH(2)P(S)(CH(2)O)(2)[P(F)N](2)(F(2)PN) (2) readily transform to the spirocyclic compound [FcCH(2)P(S)(CH(2)O)(2)PN](F(2)PN)(2) (3) not only in the presence of CsF but also with non-fluorinated bases such as Cs(2)CO(3), K(2)CO(3), KOBu(t), Et(3)N, DABCO, DBN, and DBU. The analogous tetrachloro ansa compound exo-FcCH(2)P(S)(CH(2)O)(2)[P(Cl)N](2)(Cl(2)PN) (5), however, did not transform to the chlorinated spiro compound (6) in the presence of these bases. With excess of CsF, P-Cl bonds of 5 were found to undergo fluorination leading to the formation of 2, which transformed to spirocyclic compound 3. Time dependent (31)P NMR spectroscopy was used to monitor this transformation. Crystal structure studies on the ansa substituted compounds 4 and 5 have shown weak bonding interactions involving C-H...Cl, C-H...O, and C-H...S interactions.     

A spiro to ansa rearrangement in cyclotriphosphazene derivatives

Nucleophilic substitution reactions of cyclotriphosphazene derivatives having five-membered spiro rings, N(3)P(3)Cl(4)[O(CH(2))(2)X] (X = NH or O) with alkoxides (of tetraethylene glycol and some mono-functional alcohols) give unexpected rearrangements to form stable seven-membered ring ansa compounds, even though crystallographic evidence shows ring distortion and compression of the cyclophosphazene ring. With weaker nucleophiles such as sodium phenoxide and pyrrolidine substitution at a PCl2 group is preferred and no rearrangement takes place. In contrast, reactions of the analogous phosphazenes containing six-membered spiro rings, N(3)P(3)Cl(4)[O(CH(2))(3)X], with all of the above reagents give only normal substitution reactions at the PCl2 moieties and no rearrangement products. The spiro to ansa rearrangements in cyclophosphazenes are remarkable as the reported primary reaction products with the same difunctional reagents HO(CH(2))(2)XH are predominantly spiro, with some dangling and bridging derivatives, but no ansa compounds.     

Synthesis and structure of nongeminally substituted cyclic phosphazenes with haloalkyl and thioester functional groups

Nongeminally substituted cyclic phosphazenes with various haloalkyl substituents were prepared using deprotonation-substitution reactions at the methyl groups of the cis isomers of nongeminally substituted cis-[Me(Ph)P=N]3, 2. Treatment of 2 with n-BuLi followed by reaction with organic halogenated reagents (RX=C2Cl6, BrC(O)CMe2Br, and ICH2COOEt) at low temperature afforded the various cyclic derivatives cis-[(XCH2)(Ph)PN]3 (3, X=Cl, 4, Br, and 5, I). The mono- and dibromoalkyl derivatives, cis-[Ph3(BrCH2)Me2P3N3], 6, and [Ph3(BrCH2)2MeP3N3], 7, were also isolated along with 4 when the electrophile was dibromoethane. Reaction of cis-[Ph(BrCH2)PN]3, 4, with KSC(O)Me gave cis-[Ph(MeC(O)SCH2)PN]3, 8. The structures of all the cis cyclic phosphazenes were determined by NMR spectroscopy and X-ray diffraction. All retained the basketlike shape with the hydrophobic phenyl groups opposite the haloalkyl groups on the P3N3 ring. Thermal analysis of the new cyclic trimers indicates that ring-opening polymerization does not occur. The melting points and the thermal stabilities of haloalkyl cyclophosphazenes were higher than those of the parent compound 2.     

Synthesis and characterization of novel fluorophosphazene-derived cobaltacyclopentadienyl metallacycles: reagents for assembly of aryl-bridged fluorophosphazenes

Reaction of (beta-phenylethynyl)pentafluorocyclotriphosphazene, F5P3N3C identical with CPh, with in situ generated eta5-(MeOC(O)C5H4)Co(PPh3)2 resulted in the formation of two isomers of cobaltacyclopentadienylmetallacycles, (eta(5)-carbomethoxycyclopentadienyl)(triphenylphosphine)-2,5-bis(pentafluorocyclotriphosphazenyl)-3,4-diphenyl cobaltacyclopentadiene (1) and (eta5-carbomethoxycyclopentadienyl)(triphenylphosphine)-2,4-bis(pentafluorocyclotriphosphazenyl)-3,5-diphenyl cobaltacyclopentadiene (2), along with the sandwich compound [eta5-carbomethoxycyclopentadienyl]-[eta4-1,3-bis(pentafluorocyclotriphosphazenyl)-2,4-diphenylcyclobutadiene]cobalt (3). Formation of cobaltacyclopentadienylmetallacycles or cyclobutadienylmetallocene having two fluorophosphazene units on vicinal carbon atoms of the rings was not observed in this reaction. Reaction of 1 with diphenylacetylene resulted in the formation of a novel aryl-bridged fluorophosphazene, 1,4-bis(pentafluorocyclotriphosphazenyl)-2,3,5,6-tetraphenyl benzene (4), and the conversion of cobaltametallacycle to the sandwich compound, [eta5-(MeOC(O)C5H4]Co(eta4-C4Ph4) (5). Reaction of 1 with phenylacetylene resulted in the formation of aryl-bridged fluorophosphazene, 1,4-bis(pentafluorophosphazenyl)-2,3,5,-triphenyl benzene (6). New compounds 1-4 were structurally characterized. In compound 1, the two fluorophosphazene units were oriented in gauche form with respect to each other. However, in compounds 2 and 3, they were eclipsed to each other, and in compound 4, they were oriented anti to each other.     

Syntheses and experimental studies on the relative stabilities of spiro, ansa, and bridged derivatives of cyclic tetrameric fluorophosphazene

Reactions of (CF2CH2OSiMe3)2 and CF2(CF2CH2OSiMe3)2 with N4P4F8 (1) in a 1:2.5 molar ratio resulted in the formation of monospiro compounds [(CF2CH2O)2PN](F2PN)3 (2) and [CF2(CF2)CH2O)2PN](F2PN)3 (4) as well as the intermolecular bridged compounds F7N4P4OCH2CF2CF2CH2OP4N4)F7 (3) and F7N4P4OCH2CF2CF2CF2CH2OP4N4F7 (5). An equimolar reaction of dilithiated 1,3-propanediol with 1 resulted in the 1,3-ansa-substituted compound CH2(CH2O)2[P(F)N]2(F2PN)2 (6) as the major product in good yield. However, an analogous reaction of the dilithiated 1,3-propanedithiol with 1 gave only the spirocyclic compound CH2(CH2S)2(PN)(F2PN)3 (8). The molecular structures of 2 and 6 were determined by single-crystal X-ray diffraction. In the presence of catalytic amounts of CsF in THF, the bridged compound 3 was converted to the spirocyclic compound 2 while the 1,3-ansa compound 6 under similar conditions transformed into the monospiro-substituted compound CH2(CH2O)2 (PN)(F2PN)3 (7). These transformations were monitored by time-dependent 19F and 31P NMR studies.     

Synthesis and Characterization of Ferrocene Derived Cyclic Carbaphosphazenes

Dialkylamino substituted cyclic carbaphosphazenes, (R 2 NCN) 2 (NPCl 2 ) were prepared and reacted with the ferrocene derived hydroxymethyl phosphine sulfide FcCH(CH 3 )P(S)(CH 2 OH) 2 after dilithiation to yield a series of new spirocyclic derivatives of cyclic carbaphosphazenes having ferrocenyl pendant groups. To confirm the formation of six membered spirocycles and to compare their spectral features, transesterification reactions of FcCH(CH 3 )P(S)(CH 2 OH) 2 also were carried out with P(NR 2 ) 3 , yielding the six membered heterocycles FcCH 2 P(S)(CH 2 O) 2 PNR 2 (R = Me, Et). The compounds were characterized by 1 H, 31 P, 13 C NMR, mass spectra, and elemental analysis.     

Synthesis and structure of new carborane-substituted cyclotriphosphazenes

The reactions of [N(3)P(3)Cl(6)] with one, two, or three equivalents of the difunctional 1,2-closo-carborane C(2)B(10)H(10)[CH(2)OH](2) and K(2)CO(3) in acetone have been investigated. These reactions led to the new spiro-closo-carboranylphosphazenes gem-[N(3)P(3)Cl(6-2n)[(OCH(2))(2)C(2)B(10)H(10)](n)] (n=1 (1), 2 (2)) and the first fully carborane-substituted phosphazene gem-[N(3)P(3)[(OCH(2))(2)C(2)B(10)H(10)](3)] (3). A bridged product, non-gem-[N(3)P(3)Cl(4)[(OCH(2))(2)C(2)B(10)H(10)]] (4), was also detected. The reaction of the well-known spiro derivatives [N(3)P(3)Cl(2)(O(2)C(12)H(8))(2)] and [N(3)P(3)Cl(4)(O(2)C(12)H(8))] with the same carborane-diol and K(2)CO(3) in acetone gave the new compounds gem-[N(3)P(3)(O(2)C(12)H(8))(3-n)[(OCH(2))(2)C(2)B(10)H(10)](n)] (n=1 (5) or 2 (6), respectively), without signs of intra- or intermolecularly bridged species. Upon treatment with NEt(3) in acetone, compound 5 was converted into the corresponding nido-carboranylphosphazene. However, the reaction of gem-[N(3)P(3)(O(2)C(12)H(8))(2)[(OCH(2))(2)C(2)B(10)H(10)]] (5) with NEt(3) in ethanol instead of acetone proceeded in a different manner to give the new compound (NHEt(3))(2)[N(3)P(3)(O(2)C(12)H(8))(2)(O)[OCH(2)C(2)B(9)H(10)CH(2)OCH(2)CH(3)]] (7). For compounds with two 2,2'-dioxybiphenyl units, gem-[N(3)P(3)(O(2)C(12)H(8))(2)[(OCH(2))(2)C(2)B(10)H(10)]] (5), (NHEt(3))[N(3)P(3)(O(2)C(12)H(8))(2)[(OCH(2))(2)C(2)B(9)H(10)]] (8), and (NHEt(3))(2)[N(3)P(3)(O(2)C(12)H(8))(2)(O)[OCH(2)C(2)B(9)H(10)CH(2)OCH(2)CH(3)]] (7), a mixture of different stereoisomers may be expected. However, for 5 and 7 only the meso compounds seem to be formed, with the same (R,S)-configuration as in the precursor [N(3)P(3)Cl(2)(O(2)C(12)H(8))(2)]. The reaction of 5 to give 8 seems to proceed with a change of configuration at one phosphorus center, giving a racemic mixture. The crystal structures of the nido-carboranylphosphazenes 7 and 8 have been confirmed by X-ray diffraction methods.     

Syntheses and reactions of the fluorinated cyclic thionylphosphazene NSO(Ar)[NPF(2)]2(Ar = 4-t-BuC(6)H(4)-) with difunctional reagents

The S-aryl substituted thionylphosphazene (Cl(2)PN)(2)[4-t-BuC(6)H(4)(O)SN] (1) was prepared by Friedel-Craft's reaction of NSOCl(NPCl(2))(2) with tert-butylbenzene. When it reacted with excess KSO(2)F at 110 degrees C, the P-Cl bonds of 1 were fluorinated, yielding the tetrafluorothionylphosphazene, (F(2)PN)(2)[4-t-BuC(6)H(4)(O)SN] (2). An equimolar reaction of 2 with dilithiated 1,3-propanediol in THF at -78 degrees C resulted in the formation of the ansa-substituted compound CH(2)(CH(2)O)(2)[FPN](2)[4-t-BuC(6)H(4)(O)SN] (3). The crystal structures of 2 and 3 were determined. In 3 the ansa ring is trans on the PNS heterocycle with respect to the aryl group. Reaction of 2 with the disiloxane (CF(2)CH(2)OSiMe(3))(2), in the presence of catalytic amounts of CsF in THF at 90 degrees C, resulted in the formation of the dispiro compound [(CF(2)CH(2)O)(2)PN](2)[4-t-BuC(6)H(4)(O)SN] (4). Compounds 1-4 were characterized by IR, NMR ((1)H, (13)C, (19)F, (31)P), mass spectral, and elemental analyses.     

The structural and stereogenic properties of pentaerythritoxy-bridged cyclotriphosphazene derivatives: spiro-spiro, spiro-ansa and ansa-ansa isomers

Reactions of pentaerythritol with hexachlorocyclotriphosphazene, N3P3Cl6, and gem-disubstituted cyclotriphosphazene derivatives, N3P3Cl4R2 [R = Ph, NHBu(t) or (OCH2CF2CF2CH2O)0.5] gave a series of pentaerythritol-bridged derivatives linked spiro-spiro, spiro-ansa and ansa-ansa. The structures and stereogenic properties of the products were characterised by X-ray crystallography and 31P NMR spectroscopy on addition of the chiral solvating agent, (S)-(+)-2,2,2-trifluoro-1-(9-anthryl)ethanol. Molecules with spiro-spiro and spiro-ansa bridged gem-disubstituted cyclophosphazenes [R = Ph, NHBu(t) or (OCH2CF2CF2CH2O)0.5] are found to be chiral and exist as racemates. Molecules with ansa-ansa bridged cyclophosphazenes [R = Cl or (OCH2CF2CF2CH2O)0.5] have been characterised for the first time and are shown to have meso configurations. Analysis of crystal structure data shows that the six-membered chair form of the spiro rings and the eight-membered boat-chair form of the ansa rings in the bridged compounds are similar to analogous spiro and ansa exocyclic ring conformations of 1,3-propanedioxy-derivatives of cyclophosphazenes.     

Gold and silver complexes with the ferrocenyl phosphine FcCH2PPh2

Linear gold(I) and silver(I) complexes with the ferrocenyl phosphine FcCH2PPh2 [Fc = (eta5-C5H5)Fe(eta5-C5H4)] of the types [AuR(PPh2CH2Fc)], [M(PPh3)(PPh2CH2Fc)]OTf, and [M(PPh2CH2Fc)2]OTf (M = Au, Ag) have been obtained. Three-coordinate gold(I) and silver(I) derivatives of the types [AuCl(PPh2CH2Fc)2] and [M(PPh2CH2Fc)3]X (M = Au, X = ClO4; M = Ag, X = OTf) have been obtained from the corresponding gold and silver precursors in the appropriate molar ratio, although some of them are involved in equilibria in solution. The crystal structures of [AuR(PPh2CH2Fc)] (R = Cl, C6F5), [AuL(PPh2CH2Fc)]OTf (L = PPh3, FcCH2PPh2), [Au(C6F5)3(PPh2CH2Fc)], and [Ag(PPh2CH2Fc)3]OTf have been determined by X-ray diffraction studies.     

The Interactions of Cyclophosphazenes with Olefin Containing Exocyclic Groups

Density functional calculations on the series N 3 P 3 F 5 R(R=CH 2 CH 3 , CH=CH 2 , C L CH) show that the phosphazene substituent effect is similar to that of CF 3 and is dominated by bond polarity. UV-photoelectron measurements also favor a bond polarization effect. Calculations on N 3 P 3 F 5 ECH=CH 2 (E=O, CH 2 ) and photoelectron spectroscopy of the vinyloxy derivative show the strong electronic effect of the phosphazene, which is dominated by the bond polarization mechanism. Extensive NMR correlations for substituted vinyloxy phosphazenes indicate the sensitivity of these effects to the nature of the ring substituents. The reactivity ratio and NMR data for styryloxy phosphazenes demonstrate the absence of significant mesomeric interactions.     

Diverse modes of reactivity of dialkyl azodicarboxylates with P(III) compounds: synthesis, structure, and reactivity of products other than the Morrison-Brunn-Huisgen intermediate in a Mitsunobu-type reaction

The reactivity of diethyl azodicarboxylate (DEAD)/diisopropyl azodicarboxylate (DIAD) with P(III) compounds bearing oxygen or nitrogen substituents is explored. Compounds with structures quite different from that of Morrison-Brunn-Huisgen intermediate R'(3)P(+)N(CO(2)R)N(-)(CO(2)R) (1), observed in the Mitsunobu reaction, have been established by using X-ray crystallography and NMR spectroscopy. Thus reactions with X(6-t-Bu-4-Me-C(6)H(2)O)(2)P-NH-t-Bu [X = S (8), CH(2) (9)] or XP(mu-N-t-Bu)(2)P-NH-t-Bu [X = Cl (14) or NH-t-Bu (15)] and DEAD/DIAD lead to phosphinimine-carbamate-type of products X[6-t-Bu-4-Me-C(6)H(2)O](2)P[N-t-Bu][N(CO(2)R)NH(CO(2)R)] [X = S, R = Et (16); X = CH(2), R = Et (17); X = CH(2), R = i-Pr (18)] or XP(mu-N-t-Bu)(2)P(N-t-Bu)[N-(CO(2)-i-Pr)-N(H)(CO(2)-i-Pr) [X = Cl (19), NH-t-Bu (20)]. Treatment of 19 with 2,2,2-trifluoroethanol afforded the product [(CF(3)CH(2)O)P(mu-N-t-Bu)(2)P(+)(NH-t-Bu)[N(CO(2)-i-Pr)(HNCO(2)-i-Pr)]][Cl(-)] (21) whose structure is close to one of the intermediates proposed in the Mitsunobu reaction. The isocyanate CH(2)(6-t-Bu-4-Me-C(6)H(2)O)(2)P-NCO (10) underwent 1,3-(P,C) cycloaddition with DEAD/DIAD to lead to CH(2)(6-t-Bu-4-Me-C(6)H(2)O)(2)P[N(CO(2)R)N(CO(2)R)-C(O)-N] [R = Et (22), i-Pr (23)]. Reaction of 22-23 with 1,1'-bi-2-naphthol or catechol leads to novel tetracoordinate CH(2)(6-t-Bu-4-Me-C(6)H(2)O)(2)P(2,2'-OC(10)H(6)-C(10)H(6)-OH)[NC(O)-(CO(2)R)NH(CO(2)R)] [R = Et (24), i-Pr (25)] or pentacoordinate CH(2)(6-t-Bu-4-Me-C(6)H(2)O)(2)P(1,2-O(2)C(6)H(4))[NHC(O)-N(CO(2)R)NH(CO(2)R)] [R = Et (26), i-Pr (27)] compounds in which the original NCO residue is retained; this mode of reactivity is quite different from that observed for the MBH betaine 1. In 27, the nitrogen, rather than the oxygen, occupies an apical position of the trigonal bipyramidal phosphorus violating the commonly assumed preference rules for apicophilicity. It is shown that the previously reported azide derivative 3, obtained from the reaction of 11 with DIAD, undergoes a Curtius-type rearrangement to lead to the fused cyclodiphosphazane [(CH(2)(6-t-Bu-4-Me-C(6)H(2)O)(2))P(OC(O-i-Pr)NN(CO(2)-i-Pr)N)](2) (28); this compound is in equilibrium with its monomeric form in solution at >300 K. Finally, reaction of S(6-t-Bu-4-Me-C(6)H(2)O)(2)P(OPh) (13) with DIAD gave the hexacoordinate compound S[6-t-Bu-4-Me-C(6)H(2)O](2)P(OPh)[N(CO(2)-i-Pr)NC(O-i-Pr)O] (30) with an intramolecular S-->P bond. X-ray crystallographic evidence for compounds 16, 19, 21, 22, 25, 27, 28, and 30 has been provided.     

Bridged cyclophosphazenes resulting from deprotonation reactions of cyclotriphophazenes bearing a P-NH group

Cyclotriphosphazene derivatives containing a P-NHR group in the side-chain react in the presence of a strong base to form stable intermolecular bridged products. Reaction of sodium hydride with mono-spiro cyclophosphazene derivatives having a P-NH group, N(3)P(3)Cl(4)[O(CH(2))(3)NH], (1a) or N(3)P(3)Cl(4)[CH(3)N(CH(2))(3)NH], (1b) leads to formation of bis-cyclophosphazenes bridged with an eight-membered cyclophosphazene ring in an ansa arrangement (2a, 2b) whereas reaction of sodium hydride with mono-amino cyclophosphazene derivatives [N(3)P(3)Cl(5)(NHR), R = n-hexyl, 3a; i-Pr, 3b; Ph, 3c] give bis-cyclophosphazenes bridged with a four-membered cyclophosphazane ring in a spiro arrangement (4a-c). In the latter reaction P-O-P bridged compounds (5a-c) were also obtained as a result of hydrolysis reactions associated with the amount of moisture in the solvent tetrahydrofuran. In addition, it was found that reaction of a mixture of cyclotriphosphazene with either mono spiro compound, (1a) or (1b), in the presence of sodium hydride lead to formation of the first examples of asymmetrically-bridged cyclophosphazenes (6a-b).     

O-Methylephedrine: a versatile and highly efficient ortho-directing group. Synthesis of enantiopure 1,2-disubstituted ferrocene derivatives.

O-Methylephedrine was identified as a very efficient chiral auxiliary for ortho-lithiation reactions of ferrocenes. (1R,2S)-O-Methylephedrine [CH(3)NHCH(CH(3))CH(Ph)OCH(3)] was reacted with N-ferrocenylmethyl-N,N,N-trimethylammonium iodide [FcCH(2)N(CH(3))(3)I; Fc = ferrocenyl] to give (1R,2S)-N-ferrocenylmethyl-O-methylephedrine. Treatment of this compound with t-BuLi in pentane followed by quenching with the electrophiles iodine, dibromotetrafluoroethane, chlorodiphenylphosphine or benzophenone gave 2-substituted ferrocenes in 98% de and with the (R(p))-ferrocene configuration. Subsequently, the chiral auxiliary could be replaced by systems including dimethylamine, acetate, diaryl- or dialkylphosphines to give a number of enantiopure bifunctional 1,2-disubstituted ferrocene derivatives such as (R(p))-N-2-iodo- or (R(p))-N-2-bromoferrocenylmethyldimethylamine or (R(p))-2-acetoxymethyl-1-diphenylphosphinoferrocene. As an application, ferrocenyl diphosphines possessing a planar (R(p))-ferrocene configuration only [1,2-(PPh(2))FcCH(2)PR(2), R = Cy, Ph, [3,5-(CF(3))(2)Ph]] were synthesized in three steps from O-methylephedrine and N-ferrocenylmethyl-N,N,N-trimethylammonium iodide in up to 77% overall yield.     

Reactivity of calix-tetrapyrrole SmII and SmIII complexes with acetylene: isolation of an "N-confused" calix-tetrapyrrole ring

The nature of the substituents present on the calix-tetrapyrrole tetra-anion ligand [[R2C(C4H2N)]4]4- (R = [-(CH2)5-]0.5, Et) determines the type of reactivity of the corresponding SmII compounds with acetylene. With R = [-(CH2)5-]0.5, dehydrogenation occurred to yield the nearly colorless dinuclear diacetylide complex [[[[-(CH2)5-]4-calix-tetrapyrrole]SmIII]2(mu-C2Li4)].THF as the only detectable reaction product. Conversely, with R = Et, acetylene coupling in addition to dehydrogenation resulted in the formation of a dimeric butatrienediyl enolate derivative [[(Et8-calix-tetrapyrrole)SmIII[Li[Li(thf)]2(mu-OCH=CH2)]]2(mu,eta2,eta'2-HC=C=C=CH)]. Reaction of the trivalent hydride [(Et8-calix-tetrapyrrole)(thf)SmIII[(mu-H)[Li(thf)]]2 or of the terminally bonded methyl derivative [(Et8-calix-tetrapyrrole)(CH3)SmIII[[Li(thf)]2[Li(thf)2](mu3-Cl)]] with acetylene resulted in a mixture of the carbide [[(Et8-calix-tetrapyrrole)SmIII]2(mu-C2Li4)].Et2O with the dimerization product [[(Et8-calix-tetrapyrrole)SmIII[Li[Li(thf)]2(mu3-OCH=CH2)]]2-mu,eta2,eta'2-HC=C=C=CH)]. The same reaction also yielded a third product, a trivalent complex [[(Et8-calix-tetrapyrrole)SmIII[Li(thf)2]]2], in which the macrocycle was isomerized by shifting the ring attachment of one of the four pyrrole rings.     

1,2,3,4-Tetraphenyl-1,2,3,4-tetraphospholane,a highly versatile cyclocarbaphosphine ligand: reactions with activated triosmium clusters and characterization of the products

Reaction of 1,2,3,4-tetraphenyl-1,2,3,4-tetraphospholane (I) with [Os(3)(CO)(11)(NCMe)] at ambient temperature affords substituted clusters: the monosubstituted trinuclear cluster [Os(3)(CO)(11)[(PPh)(4)CH(2)]] (1) and the isomeric linked bis-trinuclear clusters [[Os(3)(CO)(11)](2)[mu-1,4-eta(2)-(PPh)(4)CH(2)]] (2) and [[Os(3)(CO)(11)](2)[mu-1,3-eta(2)-(PPh)(4)CH(2)]] (3). Clusters 2 and 3 can also be prepared by further reaction of 1 with [Os(3)(CO)(11)(NCMe)]. The reaction at 100 degrees C gives, apart from cluster 2, the disubstituted 1,4-bridged trinuclear cluster [Os(3)(CO)(10)[mu-1,4-eta(2)-(PPh)(4)CH(2)]] (4). The conversion of 1 into 4 can be achieved through the pyrolysis of a solution of 1. When 1 reacts with an equimolar amount of [Os(3)(CO)(10)(mu-H)(2)] at 100 degrees C in toluene, the 1,2,4-linked bis-trinuclear cluster [Os(3)(CO)(11)[mu(3)-1,2,4-eta(3)-(PPh)(4)CH(2)]Os(3)(CO)(8)(mu-H)(2)] (5) is obtained. When I reacts with a 2-fold molar amount of [Os(3)(CO)(10)(mu-H)(2)], the 1,2,3,4-linked bis-trinuclear hydride cluster [[Os(3)(CO)(8)(mu-H)(2)](2)[mu(4)-1,2,3,4-eta(4)-(PPh)(4)CH(2)]] (6) is obtained. Cluster 1 exists as two conformational isomers (1y and 1r) in the crystalline state, due to different conformational arrangements of pseudoaxial carbonyls in the cluster. Cluster 3 shows two interconvertible conformers (3y and 3r) due to the inversion of the configuration of the uncoordinated outer phosphorus atom, and a pair of enantiomers exists in 3r. All of the new compounds obtained have been characterized by spectroscopic and analytical techniques, and their structures have been established by X-ray crystallography.     

Ring-closing metathesis reactions of terminal alkene-derived cyclic phosphazenes

The first examples of ring-closing metathesis (RCM) reactions of a series of terminal alkene-derived cyclic phosphazenes have been carried out. The tetrakis-, hexakis-, and octakis(allyloxy)cyclophosphazenes (NPPh(2))(NP(OCH(2)CH=CH(2))(2))(2) (1), N(3)P(3)(OCH(2)CH=CH(2))(6) (2), and N(4)P(4)(OCH(2)CH=CH(2))(8) (3) and the tetrakis(allyloxy)-S-phenylthionylphosphazene (NS(O)Ph)[NP(OCH(2)CH=CH(2))(2)](2) (4) were prepared by the reactions of CH(2)=CHCH(2)ONa with the cyclophosphazenes (NPPh(2))(NPCl(2))(2), N(3)P(3)Cl(6), and N(4)P(4)Cl(8) and the S-phenylthionylphosphazene (NS(O)Ph)(NPCl(2))(2). The reactions of 1-4 with Grubbs first-generation olefin metathesis catalyst Cl(2)Ru=CHPh(PCy(3))(2) resulted in the selective formation of seven-membered di-, tri-, and tetraspirocyclic phosphazene compounds (NPPh(2))[NP(OCH(2)CH=CHCH(2)O)](2) (5), N(3)P(3)(OCH(2)CH=CHCH(2)O)(3) (6), and N(4)P(4)(OCH(2)CH=CHCH(2)O)(4) (7) and the dispirocyclic S-phenylthionylphosphazene compound (NS(O)Ph)[NP(OCH(2)CH=CHCH(2)O)](2) (8). X-ray structural studies of 5-8 indicated that the double bond of the spiro-substituted cycloalkene units is in the cis orientation in these compounds. In contrast to the reactions of 1-4, RCM reactions of the homoallyloxy-derived cyclophosphazene and thionylphosphazene (NPPh(2))[NP(OCH(2)CH(2)CH=CH(2))(2)](2) (9) and (NS(O)Ph)[NP(OCH(2)CH(2)CH=CH(2))(2)](2) (10) with the same catalyst resulted in the formation of 11-membered diansa compounds NPPh(2)[NP(OCH(2)CH(2)CH=CHCH(2)CH(2)O)](2) (11) and (NS(O)Ph)[NP(OCH(2)CH(2)CH=CHCH(2)CH(2)O)](2) (13) and the intermolecular doubly bridged ansa-dibino-ansa compounds 12 and 14. The X-ray structural studies of compounds 11 and 13 indicated that the double bonds of the ansa-substituted cycloalkene units are in the trans orientation in these compounds. The geminal bis(homoallyloxy)tetraphenylcyclotriphosphazene [NPPh(2)](2)[NP(OCH(2)CH(2)CH=CH(2))(2)] (15) upon RCM with Grubbs first- and second-generation catalysts gave the spirocyclic product [NPPh(2)](2)[NP(OCH(2)CH(2)CH=CHCH(2)CH(2)O)] (16) along with the geminal dibino-substituted dimeric compound [NPPh(2)](2)[NP(OCH(2)CH(2)CH=CHCH(2)CH(2)O)(2)PN][NPPh(2)](2) (17) as the major product. The dibino compound 17, upon reaction with the Grubbs second-generation catalyst, was found to undergo a unique ring-opening metathesis reaction, opening up the bino bridges and partially converting to the spirocyclic compound 16.     

Orthopalladation of iminophosphoranes: synthesis, structure and study of stability

The reaction of Pd(OAc)(2) with polyfunctional iminophosphoranes Ph(3)P=NCH(2)CO(2)Me (1a), Ph(3)P=NCH(2)C(O)NMe(2) (1b), Ph(3)P=NCH(2)CH(2)SMe (1c) and Ph(3)P=NCH(2)-2-NC(5)H(4) (1d), gives the orthopalladated dinuclear complex [Pd(mu-Cl){C(6)H(4)(PPh(2)=NCH(2)CO(2)Me-kappa-C,N)-2}](2) (2a) and the mononuclear derivatives [PdCl{C(6)H(4)(PPh(2)=NCH(2)CONMe(2)-kappa-C,N,O)-2}] (2b), [PdCl{C(6)H(4)(PPh(2)=NCH(2)CH(2)SMe-kappa-C,N,S)-2}] (2c) and [PdCl{C(6)H(4)(PPh(2)=NCH(2)-2-NC(5)H(4)-kappa-C,N,N)-2}] (2d). The reaction implies the activation of a C-H bond in a phenyl ring of the phosphonium group, this fact being worthy of note due to the strongly deactivating nature of the phosphonium unit. The palladacycle containing the metallated carbon atom is remarkably stable toward the coordination of incoming ligands, while that formed by the iminic N atom and another heteroatom (O, 2a and 2b; S, 2c; N, 2d) is less stable and the resulting complexes can be considered as hemilabile. The X-ray crystal structures of the cyclopalladated [Pd(mu-Cl){C(6)H(4)(PPh(2)=NCH(2)CO(2)Me-kappa-C,N)-2}](2) (2a), [PdCl{C(6)H(4)(PPh(2)=NCH(2)-2-NC(5)H(4)-kappa-C,N,N)-2}] (2d), [Pd{C(6)H(4)(PPh(2)=NCH(2)CONMe(2)-kappa-C,N,O)-2}(NCMe)](ClO(4)) (7b) and [Pd{C(6)H(4)(PPh(2)NCH(2)CONMe(2)-kappa-C,N,O)-2}(py)](ClO(4)) (3b), and the coordination compound cis-[Pd(Cl)(2)(Ph(3)P=NCH(2)CH(2)SMe-kappa-N,S)] (8) are also reported.     

Interaction of carbene and olefin donors with [Cl2PN]3: exploration of a reductive pathway toward (PN)3

The iminophosphine-phosphazene [P(III)-P(V)] heterocyclic adduct [IPr·PN(PCl(2)N)(2)] was prepared via reduction of the cyclic phosphazene [Cl(2)PN](3) in the presence of the carbene donor IPr {IPr = [(HCNDipp)(2)C:], where Dipp = 2,6-(i)Pr(2)C(6)H(3)}. By contrast, the treatment of [Cl(2)PN](3) with the N-heterocyclic olefin IPr═CH(2) yielded the olefin-grafted phosphazene ring [(IPr═CH)P(Cl)N(PCl(2)N)(2)].