Determination of131I,134Cs,137Cs in plants and cheese after Chernobyl accident in Roumania

Various samples from the south-east region of Roumania/greens, fodder, cheese/were analyzed for¹³¹I,¹³⁴Cs and¹³⁷Cs concentrations in May and July 1986 by -ray spectrometry. The concentrations are reported in nCi. kg^–1 wet weight. For greens, a considerable decrease was observed for¹³¹I/to 3.0–7.0 nCi. kg^–1/,¹³⁴Cs/to 0.5–2.0 nCi.kg^–1/ and¹³⁷Cs /to 1.0–4.0 nCi. kg^–1/ from the first half /5–15 May/ till the end of May 1986. For cheese, maximum values were measured between 5 and 15 May /sheep cottage cheese: 500–800 nCi.kg^–1 for¹³¹I, 25–50 nCi. kg^–1 for¹³⁴Cs, 40–80 nCi. kg^–1 for¹³⁷Cs/; at the beginning of July a considerable decrease /to 5–10 nCi. kg^–1 for¹³¹I, 1.2–2.0 nCi.kg^–1 for¹³⁴Cs, 2.2–3.0 nCi. kg^–1 for¹³⁷Cs/ was observed. In autumn 1986 a small increase up to 2.0–3.0 nCi. kg^–1 for¹³⁴Cs and 3.4–5.0 nCi. kg^–1 for¹³⁷Cs /in November/ was reported. The population's internal possible contamination was strongly limited by the authorities' severe control of the food-stuff.     

Polarographic and voltammetric determination of trace amounts of 2-nitronaphthalene

The polarographic behaviour of 2-nitronaphthalene was investigated by DC tast polarography (DCTP) and differential pulse polarography (DPP), both at a dropping mercury electrode, and differential pulse voltammetry and adsorptive stripping voltammetry, both at a hanging mercury drop electrode. Optimum conditions have been found for the determination of 2-nitronaphthalene by the given methods in the concentration ranges of 2×10^–6–1×10^–4, 2×10^–7–1×10^–4, 1×10^–8–1×10^–4 and 2×10^–9–1×10^–8 M, respectively. Practical applicability of these techniques was demonstrated by the determination of 2-nitronaphthalene in drinking and river water after its preliminary separation and preconcentration using liquid–liquid and solid-phase extraction with limits of determination of 3×10^–10 M (drinking water) and 3×10^–9 M (river water).     

Effect of preparation pH on pore structure of silica gels

Surface characterization of silica gels prepared at different gelation pH from water glass and sulphuric acid were made by argon adsorption at 77 K using continuous volumetric method. While microporous silica gels prepared in the pH range of 1–3 had BET surface areas of 504–571 m² g^–1, total pore volumes of 0.26–0.31 cm³ g^–1 and micropore volumes of 0.16–0.23 cm³ g^–1, mesoporous silica gels prepared in the pH range of 3.36–0.65 had BET surface areas of 374–530 m² g^–1 and pore volumes of 0.61–0.79 cm³ g^–1.     

Voltammetric Determination of Sulfide Ions

Procedures were proposed for the voltammetric determination of S^2– at a mercury-film electrode. They are based on the oxidation of S^2– at –0.79 to –0.80 V and on the reduction of HgS, the product of the oxidation of S^2–, at –0.76 to –0.96 V in a 1 M NaOH solution. The anodic and cathodic currents are linear functions of S^2– concentration in the ranges from 1 × 10^–5 to 1 × 10^–4 M and from 2 × 10^–6 to 1 × 10^–4 M, respectively.     

Kinetics and mechanism of ligand interchange in the [RuIII(edta)L] complexes; L=Cysteine and related thiolates

Complexes of the [RuIII(edta)SR]n series, with SR–= deprotonated cysteine, N- acetylcysteine, 2–mercaptoethanol, glutathione and penicilamine, were prepared from [Ru(edta)H2O]– and the corresponding RSH thiols, at pH=5.5. The complexes exhibit intense visible absorption bands at ca. 520nm (3500M–1 cm–1), associated with LMCT from the sulfur ligands bound to RuIII. The kinetics of the formation reactions were first order in [RuIII(edta)H2O]– and thiol reactants, with k1 values ca. 1–5×102 M–1s–1 (25°C) for all the sulfur ligands except penicilamine, which reacted slower by a factor of 10. Activation parameters suggest an associative mechanism, as for the coordination of other S- and N-bound ligands to [RuIII(edta)H2O]–. A reactivity decrease is apparent at low and high pH's (ranges 1–3 and 8–10, respectively), associated with acid-base equilibria involving the less reactive [RuIII(Hedta)H2O] and [RuIII(edta)OH]2– species. A significant rate increase was found for cysteine and penicilamine at ca. pH=8.0, because the thiol reactants deprotonate. The equilibrium constants for all the ligands showed that robust complexes were formed, with K=ca. 1×105 M–1 (25°C). The dissociation rate constants, k–1, were in the 10–3–10–4 s–1 range. The influence of nucleophilic and steric effects increasing and decreasing the formation rates, respectively, is discussed for the thiolate ligands, with adequate comparisons with other L species bound to [RuIII(edta)H2O]–.     

Hochschmelzende Systeme mit Hafniumkarbid und -nitrid

Zusammenfassung Auf Grund röntgenographischer Untersuchungen bilden die Systeme: HfN–TiN, –ZrN, –TiC, –ZrC, –HfC, –NbC, –TaC sowie HfC–TiN, –ZrN, –NbN lückenlose Mischreihen. VN und TaN lösen sich in großen mengen in HfN. Ebenso nimmt HfC sehr viel TaN in fester Lösung auf. Die homogenen Bereiche von ZrC_1–x und HfC_1–x werden ermittelt.Mit 7 Abbildungen     

A study of the chemiluminescence behavior of myoglobin with luminol and its analytical applications

A chemiluminescence signal at 425 nm was observed when ferric state myoglobin was mixed with luminol in alkaline medium. Because the signal was remarkably enhanced in the presence of Fe(CN)₆ ^4–, analytical applications were investigated in a flow-injection system. The increase in chemiluminescence was linearly dependent on myoglobin concentration in the range 0.1 to 100 nmol L^–1, and the limit of detection was 0.04 nmol L^–1 with relative standard deviation 3.2% (3). It was also found that binding of Mb with the ligands CN^–, SCN^–, and F^– significantly inhibited the chemiluminescence reaction. The linear dynamic ranges for the ligands were 1.0–300.0, 0.1–3.0, and 0.5–100.0 nmol L^–1, and the limits of detection (S/N=3) 0.4, 0.04, and 0.2 nmol L^–1, for F^–, CN^–, and SCN^–, respectively. The relative standard deviations were 5.32%, 6.13%, and 3.38% for 0.1 nmol L^–1 CN^–, 0.5 nmol L^–1 SCN^–, and 1.0 nmol L^–1 F^–, respectively. At a flow rate of 2.0 mL min^–1 the assay could be accomplished in 1 min, including sampling and washing. The method has been successfully applied to the determination of myoglobin in human urine and F^– in water samples. A possible mechanism of chemiluminescence production by myoglobin and luminol is presented.     

Thermodynamics of aqueous gallium chloride. Apparent molar volumes and heat capacities at 25°C

Apparent molar volumes and heat capacities of aqueous GaCl₃ have been measured at 25°C in binary GaCl₃ solutions up to 3 mol-kg^–1, and in ternary GaCl₃-HCl solutions, containing 0.1345 mol-kg^–1 HCl to suppress hydrolysis, up to a concentration of 1 mol-kg^–1 GaCl₃. Using the Pitzer interaction model for the excess properties, and using ridge regression for the derivation of physically meaningful regression parameters, the measurements yield the following results for the standard molar properties and Pitzer parameters at 25°C: V⁰(GaCl₃)=12.85 cm³-mol^–1; ₀ ^v (GaCl₃)=1.10×10^–4 kg-mol^–1–J^–1–cm^–3; _v ¹ (GaCl₃)=2.12×10^–3 kg–mol^–1–J^–1–cm³; Cv(GaCl₃)=1.34×10^–5 kg²–J^–1–cm³; V^o(GaOHCl₂)=13.84 cm³–mol^–1; C _o ^p (GaCl₃)=–480.8 J–K^–1–mol^–1; _J ⁰ (GaCl₃)=–8.02×10^–6 kg–mol^–1–K^–2; _J ¹ (GaCl₃)=0.73×10^–4 kg–mol^–1–K^–2; C_J(GaCl₃)=–2.52×10^–6 kg²-mol^–2-K^–2; C _p ⁰ (GaOHCl₂)=20.4 J-K^–1-mol^–1. The latter parameter has only mathematical significance, its physical meaning is unclear. Comparison of the present experimental results for the standard molar properties of Ga³⁺ with semi-empirical correlations casts doubt upon the general validity of these correlation methods for trivalent cations.     

Spectroscopic study of vinylidene chloride—Vinyl chloride copolymers

Summary Deuteration technique was applied to study the micro structures of copolymer series VDC/VC by infrared spectroscopy and high resolution NMR. The CH₂ bending modes of chlorine atom containing polymers assigned as follows; –CCl₂CH₂CCl₂– 1405 cm^–1 (cryst.) and 1410 cm^–1 (amorph.), –CHClCH₂CCl₂– 1422 cm^–1, –CHClCH₂CHCl– 1428 cm^–1 (cryst.) and 1432 cm^–1 (amorph.) –CHClCH₂CH₂CHCl– 1445 cm^–1 and –CCl₂CH₂CH₂CCl₂– 1448 cm^–1. This infrared interpretation shows that only the head to tail addition occurs in the copolymerisation. Nine peaks of the methylene protons were observed clearly in the NMR spectra of the copolymers. The study of the deuterated copolymers revealed that the effects of the chemical groups until the third at both sides from the marked methylene and the stereo configuration of long VC part should be considered to assign the NMR spectra. The CCl₂ group made the chemical shift of the methylene proton to appear at lower magnetic field and the CHCl group gave the opposite behavior.

---

Zusammenfassung Mit deuterierten Monomeren wurde die Mikrostruktur der Copolymerenserie Vinyliden-Chlorid/Vinyl-Chlorid im Infraroten und mit hochauflösender Kernresonanz untersucht. Für die Biegeschwingung der Chloratome enthaltenden Polymeren der Methylengruppe ergeben sich folgende Werte: –CCl₂CH₂CCl₂– 1405 cm^–1 (krist.) und 1410 cm^–1 (amorph.), –CHClCH₂CCl₂– 1422 cm^–1, –CHClCH₂CHCl– 1428 cm^–1 (krist.) und 1432 cm^–1 (amorph.), –CHClCH₂CH₂CHCl– 1445 cm^–1 und –CCl₂CH₂CH₂CCl₂– 1448 cm^–1.Diese Interpretation des Infraroten zeigt, daß nur die Kopf-Schwanz-Addition bei der Copolymerisation stattfindet. Neun Maxima des Methylenprotons wurden deutlich in den NMR-Spektren der Copolymeren beobachtet. Die Untersuchungen an den deuterierten Copolymeren zeigen, daß die Effekte der chemischen Gruppen bis zur dritten nach beiden Seiten vom markierten Methylen und die Stereokonfiguration von langen Vinyl-Chlorid-Anteilen betrachtet werden müssen, um die NMR-Spektren zu beschreiben. Die CCl₂-Gruppe läßt die chemische Verschiebung des Methylen-protons bei geringeren magnetischen Feldern und die CHCl-Gruppe bei höheren erscheinen.

---

---

With 5 figures in 13 details and 4 tables     

Effect of using mixed ion-pairs on PVC-membrane electrodes for ephedrine

Mixed ion-pairs based on the use of ephedrinium (EPH)-TPB plus EPH-reineckate (II) and phenylephrine-TPB plus EPH-reineckate (III) were tried for use in plastic membranes. The results were compared to those of an EPH-reineckate (I) single ion-pair electrode. The Nernstian slopes were 50, 49 and 55 mV decade^–1 for membranes I, II and III, respectively. The linear concentration ranges were 10^–5–10^–1, 4.0 × 10^–5–10^–1 and 6.3 ×^–5–10^–1 M ephedrine. The detection limits were 4 ×^–6,10^–5 and 1.2 × 10^–5 M ephedrine for membranes I, II and III, respectively. The pH ranges were 4–9, 3–9 and 2–8 for I, II and III-membranes, respectively. Selectivity coefficient values for membrane II were better than those for membranes I and III. The effects of increasing KC1 concentration and temperature changes were explained for the three electrodes. The isothermal temperature coefficients were 0.00145, 0.0007 and 0.00055 V/ °C for electrodes I, II and III. Electrode III was applied for the determination of ephedrine in its pharmeaceutical preparations with an overall relative standard deviation range of 1.3–2.4% and an overall mean recovery value of 98.1%.     

Buffer Standards for the Physiological pH of Zwitterionic Compounds,MOBS and TABS from 5 to 55°C

The values of the second dissociation constant, pK₂, and related thermodynamic quantities of 4-(N-morpholino)butanesulfonic acid (MOBS) and N-tris(hydroxymethyl)-4-aminobutanesulfonic acid (TABS) have already been reported over the temperature range 5–55°C including 37{°}C. This paper reports the pH values of twelve equimolal buffer solutions at designated pH (s) with the following compositions: (a) mixtures of MOBS (0.05 mol-kg^–1) + NaMOBS (0.05 mol-kg^–1); (b) MOBS (0.08 mol-kg^–1) + NaMOBS (0.08 mol-kg^–1); (c) MOBS (0.08 mol-kg^–1) + NaMOBS (0.08 mol-kg^–1) + NaCl (0.08 mol-kg^–1); (d) TABS (0.05 mol-kg^–1) + NaTABS (0.05 mol-kg^–1); and (e) TABS (0.08 mol-kg^–1) + NaTABS (0.08 mol-kg^–1); and (f) TABS (0.08 mol-kg^–1) + NaTABS (0.08 mol-kg^–1) + NaCl (0.08 mol-kg^–1). Two buffer solutions have ionic strengths I= 0.05 mol-kg^–1, another two have I=0.08 mol-kg^–1, and the remaining two buffer solutions have I= 0.16 mol-kg^–1, which is close to that of the clinical fluids (blood serum). These buffers have been recommended as a useful pH standard for the measurements of physiological solutions. Conventional pH values of all six buffer solutions from 5–55°C, as well as those obtained from the liquid junction potential correction at 25 and 37{°}C have been calculated. The flowing-junction calomel cell has been utilized to measure E_j, the liquid junction potential.     

Trace element determination in seawater by ICP-SFMS coupled with a microflow nebulization/desolvation system

Direct and simultaneous determination of Al, Ag, As, Cd, Co, Cr, Cu, Fe, Mn, Mo, Pb, Sb, U, V and Zn in diluted (1:10 v:v) seawater from the Antarctic Ocean and the Venice Lagoon at the ng mL^–1 and pg mL^–1 level has been performed by using an inductively coupled plasma sector field mass spectrometer (ICP-SFMS). Samples were analysed by using a PFA microflow nebulizer coupled with a desolvation system or a PFA microflow nebulizer coupled with a Teflon spray chamber, respectively. Measurements were carried out at low (LR, m/m=300), medium (MR, m/m=3,000) and high (HR, m/m=7,500) resolutions depending on the studied isotope. To avoid contamination, sample pre-treatment was carried out in a clean laboratory equipped with a Class 100 vertical laminar flow hood. Concentration ranges (minimum–maximum in ng mL^–1) found in the Antarctic seawater samples (in depth profiles) were: Ag 0.0004–0.0018, As 0.69–1.32, Cd 0.031–0.096, Co 0.018–0.065, Cr 0.18–0.46, Cu 0.04–1.58, Fe 0.13–1.63, Mn 0.02–0.12, Mo 5.97–12.46, Pb 0.007–0.074, Sb 0.033–0.088, U 0.5–1.9, V 0.6–2.5 and Zn 0.16–0.80. Concentration ranges (min–max in ng mL^–1) found in the Venice Lagoon water samples (temporal profile from a benthic chamber experiment) were: Al 0.24–0.61, Ag 0.007–0.031, As 1.42–2.27, Cd 0.050–0.182, Co 0.440–1.461, Cr 0.15–0.34, Cu 0.81–2.46, Fe 0.25–1.66, Mn 11.6–31.7, Mo 6.50–10.6, Pb 0.047–0.225, Sb 0.240–0.492, U 1.7–3.3, V 1.3–2.8 and Zn 5.20–21.5. The detection limits range between 0.06 pg mL^–1 for Ag and U to 15 pg mL^–1 for Fe. In order to check the accuracy of the analytical procedure, measurements of the trace elements in a certified reference material (coastal Atlantic seawater, CASS-4-NRCC) were compared with the certified values. In addition, the results from the Antarctic and Venice Lagoon samples were compared with those obtained by using different analytical techniques.     

Fused heterocycles,VI: Reactions of 3-arylidenechromanones and -1-thiochromanones with thiourea

Summary Reactions of 3-arylidenechromanones (1 – 4) and -1-thiochromanones (5 – 8) with thiourea gave thiazines (9 – 16) under acidic and pyrimidine derivatives (17 – 21) under alkaline reaction conditions

---

Kondensierte Heterocyclen, VI: Umsetzungen von 3-Arylidenchromanonen und-1-thiochromanonen mit Thioharnstoff

Zusammenfassung Die Umsetzung von 3-Arylidenchromanonen1 – 4 und -1-thiochromanonen5 – 8 mit Thioharnstoff liefert unter sauren Bedingungen die Thiazine9 – 16 und in basischem Milieu die Pyrimidine17 – 21.

     

Simultaneous Determination of Aromatic Amines by Liquid Chromatography Coupled with Carbon Nanotubes/Poly (3-methylthiophene) Modified Dual-Electrode

Liquid chromatography with amperometric detection (LC-AD) is developed and applied to simultaneously determine five aromatic amines. In the LC-AD, a new carbon nanotubes/poly(3-methylthiophene) modified dual-electrode is fabricated and then used as the working electrode. It is found that this chemically modified electrode (CME) exhibits efficiently electrocatalytic oxidation for aromatic amines with relatively high sensitivity, stability and long-life. Thus, lower detection in LC-AD can be achieved, which are 4.0 × 10^–8 mol L^–1 for aniline, 1.6 ×10^–7 mol L^–1 for 4-nitroaniline, 1.0 × 10^–7 mol L^–1 for 4-chloroaniline, 1.5 × 10^–7 mol L^–1 for 1-naphthylamine, 1.7 × 10^–7 mol L^–1 for 2-bromoaniline. The recoveries of the five analytes are also determined, which range between 0.95 and 1.05 for drinking water, 0.86 and 1.10 for the LiWa River water.     

Comparison of GC-ICP-MS and HPLC-ICP-MS for species-specific isotope dilution analysis of tributyltin in sediment after accelerated solvent extraction

This study describes a direct comparison of GC and HPLC hyphenated to ICP–MS determination of tributyltin (TBT) in sediment by species-specific isotope dilution analysis (SS-IDMS). The certified reference sediment PACS-2 (NRC, Canada) and a candidate reference sediment (P-18/HIPA-1) were extracted using an accelerated solvent extraction (ASE) procedure. For comparison of GC and LC methods an older bottle of PACS-2 was used, whilst a fresh bottle was taken for demonstration of the accuracy of the methods. The data obtained show good agreement between both methods for both the PACS-2 sediment (LC–ICP–IDMS 828±87 ng g^–1 TBT as Sn, GC–ICP–IDMS 848±39 ng g^–1 TBT as Sn) and the P-18/ HIPA-1 sediment (LC–ICP–IDMS 78.0±9.7 ng g^–1 TBT as Sn, GC–ICP–IDMS 79.2±3.8 ng g^–1 TBT as Sn). The analysis by GC–ICP–IDMS offers a greater signal-to-noise ratio and hence a superior detection limit of 0.03 pg TBT as Sn, in the sediment extracts compared to HPLC–ICP–IDMS (3 pg TBT as Sn). A comparison of the uncertainties associated with both methods indicates superior precision of the GC approach. This is related to the better reproducibility of the peak integration, which affects the isotope ratio measurements used for IDMS. The accuracy of the ASE method combined with HPLC–ICP–IDMS was demonstrated during the international interlaboratory comparison P-18 organised by the Comité Consultatif pour la Quantité de Matière (CCQM). The results obtained by GC–ICP–IDMS for a newly opened bottle of PACS-2 were 1087±77 ng g^–1 Sn for DBT and 876±51 ng g^–1 Sn for TBT (expanded uncertainties with a coverage factor of 2), which are in good agreement with the certified values of 1090±150 ng g^–1 Sn and 980±130 ng g^–1 Sn, respectively.     

Activation Parameters for the Formation and Decay of Partial-Charge-Transfer Exciplexes of 9-Cyanoanthracene, 1,12-Benzperylene, and Pyrene

The factors affecting the rate of formation and decay of exciplexes with partial charge transfer, which form in the kinetic region of photoinduced electron transfer (G ^* _et > –0.2 eV), were studied. The rate of formation of exciplexes is controlled mainly by the diffusion of reactants and the low steric factor (0.15–1.0). The activation enthalpy and entropy for the exciplex formation (9–13 kJ mol^–1 and –(12–28) J mol^–1 K^–1) are close to the activation enthalpy and entropy of diffusion, respectively. Charge transfer in an exciplex and polarization of the medium generally occur after passing the transition state. In contrast, the activation enthalpy of exciplex decay (its conversion into the reaction products) is close to zero (±6 kJ mol^–1) and the activation entropy is strongly negative –(80–130) J mol^–1 K^–1.     

Mercury-free sono-electroanalytical detection of lead in human blood by use of bismuth-film-modified boron-doped diamond electrodes

We report the electroanalytical determination of lead by anodic stripping voltammetry at in-situ-formed, bismuth-film-modified, boron-doped diamond electrodes. Detection limits in 0.1 mol L^–1 nitric acid solution of 9.6x10^–8 mol L^–1 (0.2 ppb) and 1.1x10^–8 mol L^–1 (2.3 ppb) were obtained after 60 and 300 s deposition times, respectively. An acoustically assisted deposition procedure was also investigated and found to result in improved limits of detection of 2.6×10^–8 mol L^–1 (5.4 ppb) and 8.5×10^–10 mol L^–1 (0.18 ppb) for 60 and 300 s accumulation times, respectively. Furthermore, the sensitivity obtained under quiescent and insonated conditions increased from 5.5 (quiescent) to 76.7 A mol^–1 L (insonated) for 60 s accumulation and from 25.8 (quiescent) to 317.6 A mol^–1 L (insonated) for 300 s accumulation. Investigation of the use of ultrasound with diluted blood revealed detection limits of the order of 10^–8 mol L^–1 were achievable with excellent inter- and intra-reproducibility and sensitivity of 411.9 A mol^–1 L . For the first time, electroanalytical detection of lead in diluted blood is shown to be possible by use of insonated in-situ-formed bismuth-film-modified boron-doped diamond electrodes. This method is a rapid, sensitive, and non-toxic means of clinical sensing of lead in whole human blood.     

Researches on 2, 1, 3-thia- and selenadiazole

4-Hydroxy-, 4-hydroxy-5-methyl-, 4-hydroxy-7-methylbenzo-2,1,3-thiadiazoles are polymorphous.4-Hydroxybenzo-2,1,3-thiadiazole (I), 4-hydroxy-5-methyl- and 4-hydroxy-7-methylbenzo-2, 1, 3-thiadiazoles (II and III) melt at 114–115°, 110–112°, 100–102° C, respectively, after recrystallization from water [2–4], but after recrystallization from petrol ether [5] they melt at 128–129°, 124–125°, and 119–120° C [5]. In this connection we recrystallized these phenols repeatedly from petrol ether after recrystallizing them from water, and their melting points rose as expected [5]. On the other hand, the compounds with melting points 128–129°, 124–125°, 119–120° C (ex petrol ether), after repeated crystallization from water melted at 114–115°, 110–112°, 100–102° C, respectively.For Part XXXVIII see [1].     

Multielement measurements in Mexican cigarette tobacco

The concentration of 21 elements in cigarette tobacco in nine different brands manufactured and commercially available in Mexico has been determined using neutron activation analysis. The concentration range of the measured elements (in g g^–1) were: As, (four brands) <0.55–3.24; Ba, 64–251; Br, (four brands) 49–136; Ce, <0.3–1.7; Co, 0.29–0.55; Cr, <0.8–2.4; Cs, 0.091–0.40; Eu, <0.03; Fe, 420–680; Hf, <0.03–0.13; K, (four brands) 18300–40300; La, (four brands) <0.2–0.66; Na, (four brands) 309–566; Rb, 19–50; Sb, <0.7; Sc, 0.13–0.22; Se, <0.7; Sm, (four brands) 0.07–0.14; Sr, 227–472; Th, <0.1–0.17 and Zn, 14–56. The results are compared with the literature values for the concentration of the above elements in cigarette tobacco from other countries.     

Use of High-Performance Liquid Chromatography–UV and Gas Chromatography–Mass Spectrometry for Determination of the Imidacloprid Content of Honeybees, Pollen, Paper Filters, Grass, and Flowers

Imidacloprid is a new insecticide with a wide range of action. Because honeybees are very sensitive to this substance, two techniques (HPLC–UV and GC–MS) which enable its detection in several matrices of both animal and vegetable origin were used to monitor its possible presence in cultivated land. In the first method quantification of imidacloprid in honeybees was achieved by use of the external standard method; the detection limit was 50 mg kg^–1, the linear range 0.05–1 mg mL^–1, recovery 60–83%, and the imprecision (coefficient of variation) 8.6% for repeatability and 11.8% for reproducibility. Recovery from pollen was 71–98% in the range 0.05–0.5 mg kg^–1. The repeatability was 9.2–13.9%. Imidacloprid can often be found in the environment, not as a simple molecule but as a group of degradation products. The GC–MS method could be used to quantify all these species as oxidation products and to determine the initial quantity of imidacloprid by use of a conversion factor. The liquid chromatographic analysis could be used to detect, in a standard solution, 10 ng mL^–1 derivatized 6-chloronicotinic acid. The linearity was good (R=0.999) over a wide concentration range (10 g mL^–1–10 ng mL^–1). Several samples with different matrices (filter paper placed on an pneumatic corn seed drill, grass, flowers, honeybees, etc.) obtained during the sowing period for imidacloprid-treated corn were analyzed. The quantification limit (LOQ) was 0.005 mg kg^–1 for grass and flowers, 0.002 mg kg^–1 for honeybees, and 0.024 mg kg^–1 for paper filters.