形貌可控的四氧化三钴溶剂热合成及反应机理

采用溶剂热法合成了纯相立方晶型四氧化三钴. 用聚乙二醇作分散剂, 调整溶剂正丁醇和水的比例, 可实现对纯相Co3O4的形貌和尺寸大小的控制. 采用IR, XRD, TG-DTA 和TEM 等方法跟踪反应过程, 对溶剂热法合成Co3O4的反应机理进行了研究. 实验表明合成Co3O4的反应机理分为两步: Co(OH)2-x ·(NO3)x被氧化为Co0.81IICo0.19III(OH)2.11(NO3)0.08·0.43H2O; 该氧化产物进而缓慢转化成Co3O4.     

孔状Co_3O_4纳米片和纳米棒的选择性合成和表征(英文)

利用两步实验选择性合成孔状Co3O4纳米片和纳米棒:首先,以Co(NO3)2·6H2O,NaOH和不同量的NH4F为原料在120℃水热6h的条件下合成了Co(OH)2-Co3O4纳米片(S1)和Co(OH)F-Co3O4纳米棒(S2);然后将所得纳米片和纳米棒在400℃时加热2h即得到多孔的Co3O4纳米片和纳米棒。所得产物用X射线衍射(XRD)、场发射扫描电子显微镜(FE-SEM)和透射电子显微镜(TEM)进行了表征。此外电化学测试表明Co3O4纳米棒的电容量比Co3O4纳米片的更大。     

一种新的环糊精衍生物手性固定相的合成及其在对映异构体过量值测定中的应用

 以 β 环糊精为原料 ,合成了一种新的环糊精衍生物 2 ,6 二 O 苄基 3 O 戊酰基 β 环糊精 ,用核磁氢谱和红外光谱对产物进行了表征 ,并将所得环糊精衍生物用作毛细管气相手性固定相制备成柱 ,用于 2 ,4 二氯苯乙酮的不对称催化氢化产物 2 ,4 二氯苯乙醇和反式 2 己烯醇的Sharpless环氧化产物 反式 3 正丙基环氧乙烷甲醇的对映异构体过量值 (e.e .值 )测定和催化反应评价 ,取得了很好的结果。     

基于[P_2W_(15)O_(56)]~(12-)构筑块的四核铜夹心型化合物的合成、结构表征及其热稳定性

以三缺位型Dawson结构的钨磷酸盐前驱体Na12[α-P2W15O56]·24H2O与CuCl2·6H2O和Na3PO4为原料、水为溶剂,经溶液合成法合成了四核夹心型多金属氧酸盐化合物Na3H13[Cu4(H2O)2(P2W15O56)2]·72H2O(1);利用X射线单晶衍射仪、红外光谱仪、紫外光谱仪、X射线粉末衍射仪等分析了合成产物的结构,采用变温红外光谱测定了其热性质.结果表明,该化合物为三斜晶系,P-1空间群;其晶胞参数为:a=1.318 1(2)nm,b=1.345 1(2)nm,c=2.497 3(4)nm,α=78.149(3)°,β=88.242(3)°,γ=62.087(2)°.该化合物的骨架结构由两个三缺位的Dawson结构单元{P2W15O56}通过一个{Cu4O16}簇连接而成;其在350℃以下表现出一定的热稳定性.     

酸蒸气水热法合成钒取代水合碱式钨钼酸锆纳米晶体及热收缩Zr(WMo)0.93V0.14O7.93化合物

研究了酸蒸气水热法(ASH)合成VWMo.H2O时,酸蒸气源溶液的浓度,反应温度,填满度与反应时间等4个因素对晶体成核和生长两个阶段的影响。确定了以上4个影响因素的优化匹配条件,制备了VWMo.H2O纳米晶棒,并且对产物进行了表征。HCl-ASH法和HNO3-ASH法合成的VWMo.H2O化学式分别为Zr(WMo)0.93V0.14O6.93(OH0.92Cl0.08)2.(H2O)2和Zr(WMo)0.93V0.14O6.93(OH)2.(H2O)1.64;两者都与ZrMo2O7(OH)2.(H2O)2为同构化合物。以VWMo.H2O为前驱物在773K合成了立方热收缩化合物β-Zr(WMo)0.93V0.14O7.93。     

1,3-二(4-吡啶)丙烷-Cd(II)手性配合物的合成与晶体结构

利用室温挥发方法合成了手性化合物[Cd(bbp)2(H2O)2]·bbp·2NO3·H2O(bpp=1,3-二(4-吡啶基)丙烷);利用X射线单晶衍射分析了产物的分子结构,并测定了其荧光光谱和固体圆二色光谱.结果表明,合成产物具有含一维手性链[Cd(bbp)2(H2O)2]n的手性超分子结构;其在室温下表现出中等强度的倍频效应,其二阶非线性极化率为尿素的0.4倍,是潜在的二阶非线性光学材料.此外,合成的手性化合物呈现弱的荧光,其固体圆二色光谱则呈现正的Cotton效应.     

乙烯酮自由基(HCCO·)与氧气(O2)反应势能面的理论研究

在G2(B3LYP／MP2／CC)水平上对反应HCCO O2进行了计算,得到了反应势能面,提出了3种可能的反应机理：(1)四元环反应机理得到产物P1(HCO CO2);(2)三元环反应机理得到产物P2(CO HCO2);(3)O-O键断裂反应机理得到产物P3(O OCC(O)H)和P4(O CO HCO)．由反应势能面推测产物P1(HCO CO2)为主要产物,产物P2(CO HCO2),P3(O OCC(O)H)P4(O CO HCO)为次要产物．     

锂离子电池正极材料LiNi1/3Co1/3Mn1/3O2的低温燃烧合成

以LiNO3、Ni(NO3)2·6H2O、Co(NO3)2·6H2O、Mn(NO3)2、CO(NH2)2为原料,通过低温燃烧法在空气中合成了锂离子正极材料LiNi1/3Mn1/3Co1/3O2.采用XRD研究了合成产物的物相与结构,用SEM研究了合成产物的形貌,考察了点火温度、回火温度,回火时间以及锂过量对合成产物电化学性能的影响.研究结果表明,合成产物与层状LiNiO2的结构相同,属α-NaFeO2型层状结构,合成产物的粒度较小且比较均匀,并具有良好的电化学性能.采用低温燃烧法在空气中合成LiNi1/3Mn1/3Co1/3O2的最佳条件为:500℃点火,850℃回火20h,锂过量为15mol%.在此条件下得到的合成产物首次放电比容量达到158.9mAh/g.     

乙烯酮自由基(HCCO·)与氧气(O2)反应势能面的理论研究

在G2(B3LYP/MP2/CC)水平上对反应HCCO+O2进行了计算,得到了反应势能面,提出了3种可能的反应机理:(1)四元环反应机理得到产物P1(HCO+CO2);(2)三元环反应机理得到产物P2(CO+HCO2);(3)O—O键断裂反应机理得到产物P3(O+OCC(O)H)和P4(O+CO+HCO).由反应势能面推测产物P1(HCO+CO2)为主要产物,产物P2(CO+HCO2),P3(O+OCC(O)H)和P4(O+CO+HCO)为次要产物.     

硼酸铝晶须合成机理的研究

利用DTA、XRD和SEM研究了AlK(SO4 ) 2 H3BO3 K2 SO4 体系高温合成硼酸铝 (9Al2 O3·2B2 O3)晶须的机理 ,研究结果表明 ,在该体系中 ,9Al2 O3·2B2 O3 晶须的合成温度是 72 0～ 10 0 0℃ ,这一合成温度大大低于氧化铝 硼酸体系中 9Al2 O3·2B2 O3 晶须的合成温度 (110 0℃ )。合成机理的研究同时发现 ,该体系中 ,由 2Al2 O3·B2 O3 中间产物向9Al2 O3·2B2 O3 晶须转化的反应速率较快 ,这也明显有别于氧化铝 硼酸体系中 9Al2 O3·2B2 O3 晶须的合成机理     

Tetranuclear clusters containing a CrIII-doped MnIII4O2 core: syntheses, structures, and magnetic properties

The oxidation of MnII carboxylates by (NBu4)Cr2O7 in the presence of different phosphonic acids and chelating ligands results in six CrIII-doped tetranuclear manganese clusters formulated [Mn3CrO2(O2CCH3)4(O3PC5H4N)2(bpy)2] (1), [Mn3CrO2(O2CCH3)4(O3PC5H4N)2(phen)2] (2), [Mn3CrO2(O2CPh)4(O3PC5H4NO)2(phen)2] (3), [Mn3CrO2(O2CPh)4(O3PC6H11)2(bpy)2] (4), [Mn 3CrO2(O2CPh)4(O3PC6H11)2(phen) 2] (5), and [Mn3CrO2(O2CCH3)4(O3PC6H11)2(bpy)2] (6). Single-crystal X-ray analyses reveal that all the compounds contain similar [M4O2]8+ cores with the four metal sites arranged in planar topologies. The metal ions within the core are bridged by both carboxylate and phosphonate ligands. Temperature-dependent magnetic measurements show that in all cases dominant antiferromagnetic interactions are propagated between the metal centers. The ac magnetic measurements on compounds 5 and 6 reveal that both the in-phase and the out-of-phase signals are frequency dependent, characteristic of single-molecule magnet behaviors.     

Solid state coordination chemistry: structural consequences of variations in tether length in the oxovanadium-copper-bisterpy-[O3P(CH2)nPO3]4- system, n= 1-6 (bisterpy = 2,2':4',4'':2'',2'''-quarterpyridyl-6',6''-di-2-pyridine)

Hydrothermal reactions of Na3VO4, an appropriate Cu(II) source, bisterpy and an organodiphosphonate, H2O3P(CH2)nPO3H2 (n = 1-6) yielded a family of materials of the type [Cu2(bisterpy)]4+/VxOy(n-)/[O3P(CH2)nPO3]4-. This family of bimetallic oxides is characterized by an unusual structural diversity. The oxides [[Cu2(bisterpy)]V2O4[O3PCH2PO3H]2] (1), [[Cu2(bisterpy)(H2O)]VO2[O3P(CH2)3PO3][HO3P(CH2)3PO3H2]] (4) and [[Cu2(bisterpy)]V2O4[O3P(CH2)6PO3H]2].2H2O (7.2H2O) are one-dimensional, while [[Cu2(bisterpy)(H2O)2]V2O4[O3P(CH2)2PO3][HO3P(CH2)2PO3H]2] (2), [[Cu2(bisterpy)]V4O8[O3P(CH23PO3]2].4H2O (3.4H2O) and [[Cu2(bisterpy)]V2O4(OH)2[O3P(CH2)4PO3]].4H2O (5.4H2O) are two-dimensional. The V(IV) oxide [[Cu2(bisterpy)]V4O4[O3P(CH2)5PO3H]4].7.3H2O (6.7.3H2O) provides a relatively unusual example of a three-dimensional bimetallic oxide phosphonate. The structures reveal a variety of V/P/O substructures as building blocks.     

NF3 decomposition over some metal oxides in the absence of water

NF3 decomposition in the absence of water over Al2O3, Fe2O3, Co3O4 and NiO, and transition metal oxides (Fe2O3, Co3O4 and NiO) coated Al2O3 reagents was investigated. The results show that Al2O3 is an active reagent for NF3 decomposition with 100% conversion lasting for 8.5 h at 400 ℃. Fe2O3, Co3O4 and NiO coated Al2O3 reagents are superior to bare Al2O3, and 5%Co3O4/Al2O3 has a high reactivity with NF3 full conversion maintaining for 10.5 h. It is suggested that the presence of transition metal oxide is beneficial to the reactivity of Al2O3, and results in a significant enhancement in the fluorination of Al2O3.     

Hybrid organic-inorganic 1D and 2D frameworks with epsilon-Keggin polyoxomolybdates as building blocks

Organic-inorganic hybrid materials based on polyoxometalate building blocks with capping La3+ ions and bidentate oxygenated ligands have been obtained by reaction at room temperature of the [epsilon-PMo12O36(OH)4[La(H2O)4]]5+ polyoxocation with glutarate (C5H6O(2)(2-)) and squarate (C4O(4)(2-)) organic ligands. [epsilon-PMo12O37(OH)3[La(H2O)4(C5H6O4)0.5]4].21 H2O (1) and [epsilon-PMo12O39(OH)[La(H2O)6]2-[La(H2O)5(C4O4)0.5]2].17 H2O (2) form unprecedented 1D chains built from alternating polyoxocations and organic ligands connected through LaO links. The structures of these materials are compared to the 2D hybrid organic-inorganic framework [NC4H12]2-[Mo22O52(OH)18[La(H2O)4]2[La(CH3CO2)2]4].8H2O (3) isolated from the hydrothermal reaction of elemental precursors (MoO(4)(2-), Mo, La3+) in acetate buffer. Compound 3 is built from previously undescribed polyoxometalate units with twenty-two MoV centers capped by six La3+ ions, four of which are bridged by acetate ligands.     

Experimental and theoretical study of hydrogen atom abstraction from n-butane by lanthanum oxide cluster anions

Lanthanum oxide cluster anions are prepared by laser ablation and reacted with n-C(4)H(10) in a fast flow reactor. A time-of-flight mass spectrometer is used to detect the cluster distribution before and after the reactions. (La(2)O(3))(m=1-3)OH(-) and La(3)O(7)H(-) are observed as products, which suggests the occurrence of hydrogen atom abstraction reactions: (La(2)O(3))(m=1-3)O(-) + n-C(4)H(10) → (La(2)O(3))(m=1-3)OH(-) + C(4)H(9) and La(3)O(7)(-) + n-C(4)H(10) → La(3)O(7)H(-) + C(4)H(9). Density functional theory (DFT) calculations are performed to study the structures and bonding properties of La(2)O(4)(-), La(3)O(7)(-), and La(4)O(7)(-) clusters. The calculated results show that each of La(2)O(4)(-) and La(4)O(7)(-) contains one oxygen-centered radical (O(-?)) which is responsible for the high reactivity toward n-C(4)H(10). La(3)O(7)(-) contains one oxygen-centered radical (O(-?)) and one superoxide unit (O(2)(-?)), and the O(-?) is responsible for its high reactivity toward n-C(4)H(10). The O(-?) and O(2)(-?) can be considered to be generated by the adsorption of an O(2) molecule onto the singlet La(3)O(5)(-) with electron transfer from a terminally bonded oxygen ion (O(2-)) to the O(2). This may help us understand the mechanism of the formation of O(-?) and O(2)(-?) radicals in lanthanum oxide systems. The reaction mechanisms of La(2)O(4)(-) + n-C(4)H(10) and La(3)O(7)(-) + n-C(4)H(10) are also studied by the DFT calculations, and the calculated results are in good agreement with the experimental observations.     

Self-assembly of two- and three-dimensional coordination networks with hexamethylenetetramine and different silver(I) salts

Interesting two-dimensional networks with square or hexagonal cavities, and three-dimensional networks with different channels, have been obtained by varying the counterions, the molar ratio of metal to hmt (hmt = hexamethylenetetramine) and the pH values of the initial solutions. Among the eleven products isolated and structurally characterized, two have a metal-to-hmt molar ratio of 2:1 and are the first examples of Ag-hmt square networks, namely [Ag2(mu4-hmt)(NO2)2] (1) and [Ag2(mu4-hmt)(SO4)(H2O)].4H2O (2), two have a metal-to-hmt molar ratio of 1:1 and are 2-D networks with hexagonal cavities, namely [Ag(micro3-hmt)(NO2)] (3) and [Ag2(micro3-hmt)2](S2O6).2H2O (4), and seven present the metal-to-hmt molar ratios of 3:1, 2:1, 3:2, or 4:3 and are 3-D networks of novel topologies and with different channels, namely [Ag2(mu4-hmt)(micro4-ox)] (5), [Ag3(micro4-hmt)2(H2O)2](SO4)(HSO4). 2H2O (6), [Ag2(mu4-hmt)(mu2-O2CMe)](MeCO2).4.5 H2O (7), [Ag2(mu4-hmt)(mu3-maleate)].5H2O (8), [Ag3(mu4-hmt)(mu2-O2CPh)3] (9), [Ag4(mu4-hmt)3(H2O)](SO4)(NO3)2.3H2O (10), and [Ag12(mu4-hmt)6(mu3-HPO4)(mu2-H2PO4)3(H2PO4)7(H2O)](H3PO4).10.5H2O (11).     

Syntheses and structures of organic-inorganic hybrid compounds based on metal-fluconazole coordination polymers and the beta-Mo8O26 anion

Five organic-inorganic hybrid compounds, namely, [Co2(fcz)4(H2O)4][beta-Mo8O26].5H2O (1), [Ni2(fcz)4(H2O)4][beta-Mo8O26].5H2O (2), [Zn2(fcz)4(beta-Mo8O26)].4H2O (3), [Cu2(fcz)4(beta-Mo8O26)].4H2O (4), and [Ag4(fcz)4(beta-Mo8O26)] (5), where fcz is fluconazole [2-(2,4-difluorophenyl)-1,3-di(1H-1,2,4-triazol-1-yl)propan-2-ol], were synthesized under hydrothermal conditions, and crystal structures of 1-5 have been determined by X-ray diffraction. In compounds 1 and 2, metal cations are linked by fluconazole ligands to form hinged chain structures and [beta-Mo8O26]4- anions act as counterions. In compound 3, Zn(II) cations are bridged by fluconazole ligands to form 2D (4,4) networks, and each pair of these networks is linked by [beta-Mo8O26]4- anions to form a sandwich double-layer structure. In compound 4, Cu(II) cations are bridged by fluconazole ligands to form 2D (4,4) networks, and these networks are connected by [beta-Mo8O26]4- anions to form a 3D framework. In compound 5, AgI cations and [Ag2]2+ units are bridged by fluconazole ligands to form 2D Ag-fcz layers, and these layers are further connected by [beta-Mo8O26]4- anions to form a complicated 3D structure with the topology of (7(2).8(1))2(7(3).8(3))(7(2).8(11).10(1).12(1))2. Thermogravimetric analyses for these compounds are also discussed in detail. The complexes exhibit antitumor activity in vitro, as shown by MTT experiments.     

Triangular oxalate clusters [W(3)(mu(3)-S)(mu(2)-S(2))(3)(C(2)O(4))(3)](2)(-) as building blocks for coordination polymers and nanosized complexes

The reaction of aqueous [W3S7(C2O4)3](2-) with Ln(3+) and Th(4+) in a 1:1 molar ratio leads to oxalate-bridged heteropolynuclear molecular complexes and coordination polymers. La(3+) and Ce(3+) give a layered structure with big (about 1.8 nm) honeycomb pores which are filled with water molecules and lanthanide ions, in {[Ln(H2O)6]3[W3S7(C2O4)3]4}Br x xH2O (Ia and Ib). The smaller Pr(3+), Nd(3+), Sm(3+), Eu(3+), and Gd(3+) ions give discrete nanomolecules [(W3S7(C2O4)3Ln(H2O)5)2(mu-C2O4)] (with a separation of about 3.2 nm between the most distant parts of the molecule), which are further united into zigzag chains by specific S2...Br- contacts to achieve the overall stoichiometry K[(W3S7(C2O4)3Ln(H2O)5)2(mu-C2O4)]Br.xH2O (IIa-IId). Th(4+) gives K2[(W3S7(C2O4)3)4Th2(OH)2(H2O)10] x 14.33H2O (III) with a nanosized discrete anion (with a separation of about 2.7 nm between the most distant parts of the molecule), in which two thorium atoms are bound via two hydroxide groups into the Th2(OH)2(6+) unit, and each Th is further coordinated by five water molecules and two monodentate [W3S7(C2O4)](2-) cluster ligands. All compounds were characterized by X-ray structure analysis and IR spectroscopy. Magnetic susceptibility measurements in the temperature range of 2-300 K show weak antiferromagnetic interactions between two lanthanides atoms for compounds IIa, IIb, and IId. The thermal decomposition of Ia, Ib, and IIb was studied by thermogravimetry.     

若干含氧桥双核钼(V)原子簇化合物的研究

本文在测定了五个新颖双核钼(V)簇合物的晶体结构(QH)4[Mo2O4(NCS)6](1),H(PyH)3.[Mo2O4(C2O4)2(H2O)2]2.2H2O(2), (QH)3[Mo2O4(C4H3OCOO)(NCS)4](3),(QH)3[Mo2O4.(CH2OH)(NCS)5](4)和(PyH)4[Mo2O3(SO4)(NCS)6](5)以及文献报道该类型化合物结构数据的基础上, 综述了含氧桥双核钼(V)簇合物的结构特征, 并应用SCC-EHMO方法探讨了该类型化合物的电子结构和成簇机理, 最后用简征坐标分析法, 研究了含氧桥双核钼(V)化合物簇胳单元[Mo2O4]^2^+和[Mo2O3SO4]^2^+的振动结构及其红外谱带归属。     

Synthesis and characterization of high nuclearity iron(III) phosphonate molecular clusters

Three new phosphonic acid ligands (4- (t)butylphenyl phosphonic acid, 3,5-dimethylphenyl phosphonic acid, and diphenylmethylphosphonic acid) have been synthesized and employed in search of high molecularity iron(III) clusters. The cluster compounds are characterized by single crystal X-ray diffraction and magnetic measurements. The solvothermal reaction of FeCl 3.6H 2O with diphenylacetic acid and p- (t)butylphenyl phosphonic acid resulted in an unprecedented dodecanuclear cluster [Fe 12(mu 2-O) 4(mu 3-O) 4(O 2CCHPh 2) 14(4- (t)buPhPO 3H) 6]( 1) having a double butterfly like core structure. [Fe 12(mu 2-O) 4(mu 3-O) 4(O 2CPh) 14(C 10H 17PO 3H) 6]( 2), another dodecanuclear cluster having core structure similar to 1, has been synthesized in a reaction between [Fe 3O(O 2CPh) 6(H 2O) 3]Cl and camphylphosphonic acid in the presence of triethylamine at ambient condition. 3,5-Dimethylphenyl phosphonic acid on reacting solvothermally with an oxo-centered iron triangle [Fe 3O(O 2CCMe 3) 6(H 2O) 3]Cl gives a nonanuclear cluster [Fe 9(mu 3-O) 4(O 3PPh(Me) 2) 3(O 2CCMe 3) 13]( 3) having icosahedral type core structure where three positions of the iron atoms have been replaced by phosphorus. Another nonanuclear [Fe 9(O) 3(OH) 3(O 3PCHPh 2) 6(O 2CCMe 3) 6(H 2O) 9] ( 4), having a distorted cylindrical core structure, has been synthesized in a similar solvothermal reaction between [Fe 3O(O 2CCMe 3) 6(H 2O) 3]Cl and biphenylmethyl phosphonic acid. All compounds are characterized by IR spectra, elemental analysis, as well as single crystal X-ray analysis. Magnetic measurements for all the compounds reveal that there are antiferromagnetic interactions between the metal centers.