Structure and stability of ammonium-sulfate and guanidium-sulfate complex

Ab initio (HF/6-31G^** and B3LYP/6-31 + + G^**) methods have been used to study the stability and structure of complexes between CH₃SO⁻₃ and CH₃NH⁺₃ or C(NH₂)⁺₃. Results show that no hydrogen jump is involved in the complex formations, which is different from previous work studying complexes between CH₃COO⁻ and CH₃NH⁺₃. In addition, we have studied complexes between CH₃SO⁻₃ and HC(NH₂)⁺₃ or ⁺H₃NC(NH₂)₃, all of which have a cage structure.     

Pyramidane 2. Further computational studies: potential energy surface, basicity and acidity, electron-withdrawing and electron-donating power, ionization energy and electron affinity, heat of formation and strain energy, and NMR chemical shifts

The novel cycloalkane pyramidane (tetracyclo[2.1.0.0^1,30^2,5]pentane, [3.3.3.3]fenestrane), C₅H₄, with a pyramidal carbon atom, was investigated further. Calculations at the B3LYP/6-31G^* and G2(MP2) levels supported earlier conclusions from QCISD(T)/6-31G^*//MP2(FC)/6-31G^* energies that pyramidane lies in a deep well (ca. 100 kJ mol⁻¹) on the potential energy surface. The pyramidal carbon is predicted to have a lone electron pair, and calculations (CBS-4) indicate that pyramidane is remarkably basic for a saturated hydrocarbon (proton affinity 976, cf. 922 and 915 kJ mol⁻¹ for pyridine and aniline, respectively). The calculated (CBS-4) acidity is similar to that of tetrahedrane and toluene; the pyramidyl group (C₅H₃) attached to an atom bearing a lone electron pair appears to be much more strongly electron-withdrawing than the phenyl group. The infrared CO stretching frequency and C–CHO rotational barriers of pyramCHO, PhCHO and cyclopropylCHO indicate that the pyramidyl group is comparable to phenyl and cyclopropyl in its ability to donate electrons to an electron-deficient carbon. The adiabatic ionization energy of pyramidane is ca. 9.0 eV (MP2/6-31G^*, energy differences and Koopmans’ theorem), similar to that of typical cycloalkanes. The heat of formation of pyramidane was calculated by the G2(MP2) method and isodesmic reactions to be to be 585 kJ mol⁻¹ and the strain energy was estimated to be 622 kJ mol⁻¹; pyramidane is 122 kJ mol⁻¹ more strained than its isomer spiropentadiene. Application of the NMR NICS method, varying the position of the probe nucleus, gave no evidence for benzenoid-type aromaticity in the potentially cyclobutadiene cation-like base of pyramidane.     

Theoretical study of the thermal interconversion mechanism between the norbornadiene and quadricyclane radical cations

Geometry optimizations at the UHF/6-31G^* and UMP2/6-31G^* levels of theory were performed to find the transition state in the interconversion between norbornadiene (N) and quadricyclane (Q) radical cations. Two transition structures, TS^+·₁ and TS^+·₂, were obtained which have C₁ and C₂ symmetry, respectively. Vibrational analysis at the UHF and UMP2 levels of theory and IRC calculation showed that TS^+·₁ is the true transition state connecting N^+· and Q^+·, while TS^+·₂ is a second order saddle point.     

Benzooxirene. Ab initio calculations

Ab initio calculations have been performed on benzooxirene, the corresponding oxo carbene (“ketocarbene”), and the transition state linking the two. At the highest level used, QCISD(T)/6-31G^*//MP2(FULL)/6-1G^* with MP2(FULL)/ 6-31G^* zero point energy corrections, the relative energies of the oxirene, the transition state and the carbene are 0, 24.6, and −17.8 kJ mol⁻¹. Correlation energy effects are very important in this system: at the QCISD(T) level the oxirene lies above the carbene, as at the MP4 and HF levels, but at the MP2 level the ordering is reversed. Benzooxirene is probably slightly nonplanar: the HF/6-31G^* geometry is C_2v but the MP2(Fermi contact)/6-31G^* geometry is C_s with a 6-/3-ring coplanarity deviation of about 6.9 °, although in the MP2(FULL)/6-31G^* geometry this is reduced to about 3.1 °.     

Heats of formation of isomeric [C, H4, O], [C, H3, N] and [C, H5, N] radical cations

The heats of formation of six radical cations have been calculated using ab initio MO methods at the MP4/6-31 + G(2df, p) level with MP2/6-31G(d, p)-optimized geometries. The theoretical values for ΔH⁰_f,298 (kJ/mol) of the radical ions considered are (experimental values in parentheses): methanol CH₃OH^+√: 854 (845); methyleneoxonium CH₂OH^+√₂: 815 (816); methyleneimine CH₂NH^+√: 1076 (1054); aminomethylene HCNH^+√₂: 1040 (1079); methylamine CH₃NH^+√₂: 863 (843) and methyleneammonium CH₂NH^+√₃: 855 (958). The calculated results thus confirm the discrepancy between experiment and theory on the heats of formation of nitrogen-containing radical cations. In the latter, the distonic species are calculated to be more stable than their classical isomers. The higher stability of the distonic ions has also been discussed. The recommended heat of formation of the methyleneiminium cation CH₂NH⁺₂ is 754 kJ/mol.     

Ab initio studies on the electronic structures of certain 10π-electron six-membered ring compounds

By using ab initio methods of all-electron or effective core potential calculations, the electronic structures and the possible aromaticity of some 10π-electron systems, C₆H₆⁴⁻ (1), N₆⁴⁻ (2), P₆⁴⁻ (3), S₆²⁻ (4), Te₆²⁻ (5) and S₃N₃⁻ (6), have been studied at the SCF levels using 4-31G//4-31G and 6-31G^*//6-31G^* basis sets. The bonding characteristics of these systems are analysed in terms of the canonical molecular orbital and the Foster-Boys localized molecular orbital results. The application of the second-order Jahn-Teller theorem to the stability of these diamagnetical planar species is presented.     

Conformational stability of 1-bromo-2-fluoroethane from temperature dependent FT-IR spectra of rare gas solutions

Variable temperature (−55 to −135°C) studies of the infrared spectra (3500–400 cm⁻¹) of 1-bromo-2-fluoroethane, BrCH₂CH₂F, dissolved in liquid krypton and xenon have been recorded. From these data, the enthalpy difference has been determined to be 108±9 cm⁻¹ (1.296±0.113 kJ/mol) and 112±8 cm⁻¹ (1.346±0.098 kJ/mol) from the krypton and xenon solutions, respectively, with the trans conformer the more stable rotamer. Complete vibrational assignments are presented for both conformers which are consistent with the predicted frequencies obtained from the ab initio MP2/6-31G^* calculations. The optimized geometries, conformational stabilities, harmonic force fields, infrared intensities, Raman activities, and depolarization ratios have been obtained from RHF/6-31G^* and/or MP2/6-31G^* ab initio calculations. These quantities are compared to the corresponding experimental quantities when appropriate. Structural parameters and conformational stability have also been obtained from MP2/6-311+G^** calculations. Combining the ab initio predicted structural parameters with the microwave rotational constants, r_o parameters have been obtained for the gauche conformer.     

Theoretical study of some 1,3-substituted (1,3-diketonato)borondifluorides. Potential energy curve relevant to the barrier crossing reaction

Ab initio Hartree-Fock calculations utilising STO-3G, 3-21G^* and 6-31G^* basis sets have been performed on three neutral and highly polar molecules, (diformylmethine)borondifluoride, (acetylacetonato)borondifluoride and (dibenzylmethine) borondifluoride. The calculated and experimental structures are well correlated when using the HF/3-21G^* basis set, except for the structure parameters involving the boron atom. The HF/6-31G^* basis set does not improve the accuracy in structure calculations. The conformational analysis is in agreement with the experimentally observed C_2v symmetrical structures, where the boron atom is tetrahedrally coordinated. The calculations support a one-dimensional ground state barrier crossing reaction for (dibenzylmethine)borondifluoride, where the phenyl torsion is the most likely reaction coordinate. Both HF/6-31G^* calculations and the second-order Møller-Plesset correction with the 3-21G^* basis set suggest an activation energy of the ground state reaction of about 30 kJ mol⁻¹. The ground state barrier crossing reaction kinetics is evaluated by the Kramers theory. The calculated ground state parameters relevant to the barrier crossing reaction are compared with the experimentally observed excited state values.     

Theoretical Study on Ionic Liquid Based on 1-Ethyl-3-Methyl- Imidazolium Cation and Hexafluorophosphate or Tetrafluoroborate

The Hartree-Fock and DFT/B3LYP methods have been employed to investigate the electronic structures of 1-ethy1-3-methyl-imidazolium cation(EMIM~ ),BF_4~-,PF_6~-,EMIM~ -BF_4~-,and EMIM~ -PF_6~- using the Gaussian-94 soft-package at 6-31 G(d,p)basis set level for hydrogen,carbon,nitrogen,boron, phosphorus,and fluorine atoms.Comparison of the electronic structures of the lowest energy of EMIM~ - BF_4~- and EMIM~ -PF_6~- pairs,and single EMIM~ ,BF_4~- and PF_6~- showed that the optimized EMIM~ -BF_4~- and EMIM~ -PF_6~- pair conformers were BF_4~- and PF_6~- outside the 5-ring plane between the ethyl group and the methyl group.The cohesion of C—H…F hydrogen bond between cation and anion is reinforced by charge assistance.The interaction energy between EMIM~ and PF_6~- is 328.8 kJ/mol at the B3LYP level and 326.6 kJ/mol at the Hartree-Fock level,whereas that between EMIM~ and BF_4~- is 353.5 kJ/mol at the B3LYP level and 350.5 kJ/mol at the Hartree-Fock level.The low energy interactions caused by bulky asymmetric EMIM~ ,and charge dispersion of cation and anion give rise to the low melting point of ionic liquid EMIM~ -BF_4~- and EMIM~ -PF_6~-.The two hydrogen bonding models of single hydrogen bond formation,and the hydrogen transfer between C_2 in EMIM~ and F in BF_4~- or PF_6~- were principally depicted.     

Electronic structure of N-sulfonylimines

The electronic structure of N-sulfonylimines has been studied in detail using ab initio MO and density functional methods. The S–N rotational barriers in HS(O)₂N=CH₂ at G2MP2 and CBS-Q levels have been found to be 3.25 and 3.43 kcal/mol respectively. Complete optimization at HF/6-31+G^*, MP2(full)/6-31+G^* and B3LYP/6-31+G^* levels have shown that synperiplanar arrangement of S–O with respect to C=N is more stable. NBO analysis has been carried out to quantitatively estimate these delocalisations and charge polarization in RS(O)₂N=CH₂ (R=H, Me, Cl, F). The Lewis basic character in N-sulfonylimines is less compared to N-alkylimines due to anomeric interactions that reduce the lone pair electron density on nitrogen in 1.     

Ab initio calculations of minimum-energy pathways of the nucleophilic addition of the H anion, LiH molecule and Li/H ion pair to acetylene and methylacetylene

Ab initio calculations were performed for special points of the minimal energy pathways (MEP) of the nucleophilic addition reactions of the isolated H⁻ anion, LiH molecule and Li⁺/H⁻ ion pair to acetylene (A) and methylacetylene (MA) molecules, proceeding in accordance (M) and against (aM) the Markovnikov's rule. All structural parameters were optimized using the restricted Hartree–Fock (RHF) method. For the addition of H⁻, the 6-31++G^* basis set was used and for the reactions of LiH and Li⁺/H⁻ the 6-31G^* basis set with the subsequent recalculation of single point energies, taking into account of electron correlation energy by means of the second-order Möller–Plesset perturbation theory at the MP2/6-31++G^** level. The results of calculations demonstrate, that the energy characteristics of both M- and aM-additions with H⁻ do not differ sufficiently (0.1–1.2 kcal/mol for the activation energies (ΔE_a) and the reaction heats (ΔQ)). The substitution of the H atom by the CH₃ group in A molecule results in practically the same values of ΔQ and ΔE_a. On the contrary, for the LiH molecule and Li⁺/H⁻ ionic pair, the M-addition is favorable (charge control). It is found that the presence of electrophile decreases the activation energy by 3–5 kcal/mol as compared with the addition of the isolated hydride ion H⁻.     

Structure and conformational stability of CH2CHCH2X (X=F, Cl and Br) molecules—post Hartree–Fock and density functional theory methods

The molecular structure and conformational stability of CH₂CHCH₂X (X=F, Cl and Br) molecules were studied using ab initio and density functional theory (DFT) methods. The molecular geometries of 3-fluoropropene were optimized employing BLYP and B3LYP levels of theory of DFT method implementing 6-311+G(d,p) basis set. The MP2/6-31G^*, BLYP and B3LYP levels of theory of ab initio and DFT methods were used to optimize the 3-chloropropene and 3-bromopropene molecules. The structural and physical parameters of the molecules are discussed with the available experimental values. The rotational potential energy surface of the above molecules were obtained at MP2/6-31G^* and B3LYP/6-311+G(d,p) levels of theory. The Fourier decomposition of the rotational potentials were analyzed. The HF/6-31G^* and MP2/6-31G^* levels of theory have predicted the cis conformer as the minimum energy structure for 3-fluoropropene, which is in agreement with the experimental values, whereas the BLYP/6-311+G(d,p) and B3LYP/6-311+G(d,p) levels of theory reverses the order of conformation. The ΔE values calculated for 3-chloropropene at MP2/6-31G^*, BLYP/6-311+G(d,p) and B3LYP/6-311+G(d,p) levels of theory show that the gauche form is more stable than the cis form, which is in agreement with the experimental value. The same levels of theory have also predicted that the gauche form is stable than cis for 3-bromopropene molecule. The maximum hardness principle has been able to predict the stable conformer of 3-fluoropropene at HF/6-31G^* level of theory, but the same level of theory reverses the conformational stability of 3-chloropropene and 3-bromopropene molecules and MP2/6-31G^* level of theory predicted the stable conformer correctly.     

Molecular structure and conformational stability of allylisocyanate—post-Hartree–Fock and density functional theory studies

The molecular structure and conformational stability of allylisocyanate (CH₂CHCH₂NCO) molecule was studied using the ab initio and DFT methods. The geometries of possible conformers, C-gauche (δ=120°, θ=0°) (δ=C=C–C–N and θ=C–C–N=C) and C-cis N-trans (δ=0° and θ=180°) were optimized employing HF/6-31G^*, MP2/6-31G^* levels of theory of ab initio and BLYP, B3LYP, BPW91 and B3PW91 methods of DFT implementing the atomic basis set 6-311+G(d,p). The structural and physical parameters of the above conformers were discussed with the experimental and theoretical values of the related molecules, methylisocyanate and 3-fluoropropene. It has been found that the N=C=O bond angle is not linear as the experimental result for both the conformers and the theoretical bond angle is 173°. The rotational potential energy surfaces have been performed at the HF/6-31G^*, and MP2/6-31G^* levels of theory. The Fourier decomposition potentials were analysed at the HF/6-31G^*, and MP2/6-31G^* levels of theory. The HF/6-31G^* level of theory predicted that the C-gauche conformer is more stable than the C-cis N-trans conformer by 0.41 kJ/mol, but the MP2 and DFT methods predicted the C-cis N-trans conformer is found to be more stable than the C-gauche conformer. The calculated chemical hardness value at the HF/6-31G^* level of theory predicted the C-cis N-trans form is more stable than C-gauche form, whereas the chemical hardness value at the MP2/6-31G^* level of theory favours the slight preference towards the C-gauge conformer.     

乙烯醇锂的从头算研究

用限制的HF/3-21G和HF/6-31G^*优化乙烯醇锂的几种可能构型,比较了它们的稳定性.用限制的HF/3-1G,从乙醛开始,探讨了气相反应生成乙烯醇锂的机理,并在MP2水平上用6-31G^*基组计算了反应热.     

A theoretical study on decomposition of carbon tetrachloride, trichloroethylene and ethyl chloride in dry air under the influence of an electron beam

New experimental data were published in literature regarding CCl₄, C₂HCl₃ and C₂H₅Cl decomposition in dry air under electron beam influence. Taking into account experimental data theoretical models of those species decomposition were established and computer simulations were performed by the authors of this work to find the kinetics of such processes. The results of the calculations and experimental data show that CCl₄ decomposition depends on delivered dose and initial CCl₄ concentrations. The calculation revealed that recombination of CCl⁺₄ and Cl⁻ is the source of CCl₃ radicals and that reaction may have an important role in the process of CCl₄ decomposition. A theoretical model of C₂HCl₃ decomposition in dry air under electron beam influence describes the decay of C₂HCl₃ and the formation of several products such as Cl₂, CCl₂O, CO, CO₂, HCl and C₂HCl₃O. The detailed comparison of experimental and theoretical data shows relatively good agreement in efficiency of C₂HCl₃ decomposition process, but it can be achieved only with an assumption that the relation between rate constants of C₂HCl₄O intermediate product decomposition (C₂HCl₃O+Cl and COCl₂+CHCl₂) should be around 20 and C₂HCl₃O oxidation rate should be not lower than 7.5×10⁻¹¹ cm³/mols. All those rate constants are not yet established experimentally. The results of the calculation of C₂H₅Cl decomposition and the data obtained experimentally were compared. The temperature, gas pressure, initial C₂H₅Cl concentration and dose range were equal in both cases. An elaborated model allow us to obtain quantitatively similar results as the experiments, but the degree of C₂H₅Cl decomposition for certain dose levels is significantly higher in experimental data. It is quite probable that some important processes have not been included to the theoretical model.     

Inverse phase transfer catalysis. Kinetics of the pyridine 1-oxide-catalyzed reactions of dichlorobenzoyl chlorides and benzoate ions

The substitution reactions of 2,3-, 2,4-, 3,4-, or 3,5-dichlorobenzoyl chloride (Cl₂C₆H₃COCl) and 2,3-, 2,4-, 3,4-, or 3,5-dichlorobenzoate ion (Cl₂C₆H₅COO⁻) or benzoate ion (C₆H₅COO⁻) in a two-phase H₂O/CH₂Cl₂ medium using pyridine 1-oxide (PNO) as an inverse phase transfer catalyst were investigated. The reaction of Cl₂C₆H₃COCl and PNO in CH₂Cl₂ to produce the ionic intermediate, 1-(dichlorobenzoyloxy)-pyridinium chloride (Cl₂C₆H₃COONP⁺Cl⁻) is the rate-determining step. In the PNO-catalyzed two-phase reaction of Cl₂C₆H₃COCl and C₆H₅COONa, the order of reactivities of Cl₂C₆H₃COCl toward reaction with PNO is (2,3-, 2,4-)>3,5->3,4-2,6-Cl₂C₆H₃COCl, whereas it is 3,5->(2,3-, 3,4-)>2,4-Cl₂C₆H₃COCl in the PNO-catalyzed two-phase reaction of Cl₂C₆H₃COCl and the corresponding Cl₂C₆H₃COONa. The order of reactivities of Cl₂C₆H₃COO⁻ ions towards the reaction with 1-(benzoyloxy)-pyridinium (C₆H₅COONP⁺) ion is (3,4-, 3,5-)>(2,3-, 2,4-Cl₂C₆H₃COO⁻).     

Dimers, trimers and oligomers of sulfur oxides: an ab initio and density functional study

Ab initio (HF/3-21G^*), DFT (B3LYP with basis sets 6-31G^*, 6-311+G^* and 6-311+G(2d)) and, in some cases, MP2/6-31G^* calculations, were done on cyclic dimers, trimers, etc. and on acyclic oligomers (with OH and H on the ends) of sulfur monoxide and sulfur dioxide. The four cyclic (SO)_n molecules were (S–O)₂ (1,3,2,4-dioxadithietane, 1a), (S–O)₃ (1,3,5,2,4,6-trioxatrithiane, 2a), (S(=O))₄ (tetrathietane 1,2,3,4-tetraoxide, 1b), and (S(=O))₆ (hexathiane 1,2,3,4,5,6-hexaoxide, 2b). The four cyclic (SO₂)_n molecules were the dioxide of 1a (1,3,2,4-dioxadithietane 2,4-dioxide, 1c), the trioxide of 2a (1,3,5,2,4,6-trioxatrithiane 2,4,6-trioxide, 2c), the tetraoxide of 1b (tetrathietane 1,1,2,2,3,3,4,4-octaoxide, 1d) and the hexaoxide of 2b (hexathiane 1,1,2,2,3,3,4,4,5,5,6,6-dodecaoxide, 2d). The 16 acyclic molecules (oxides of disulfane, trisulfane, etc. and oxides of oxadisulfane, dioxatrisulfane, etc.) were (–S–O–)_n, (–S(=O)–)_n, (–S(=O)O–)_n, and (–S(=O)₂–)_n, with n from 2 to 5 and HO, H at the ends. Most of these species are relative minima on the B3LYP/6-31G^* potential energy surface. In energy content, the SO dimer, etc. lie below, and the SO₂ dimer, etc. above, their SO_x components, at all the electron-correlated levels.     

Role of axial ligation on potentiometric response of Co(III) tetraphenylporphyrin-doped polymeric membranes to nitrite ions

Two types of Co(III) tetraphenylporphyrins, Co(III)TPPX (I) and Co(III)(N)TPPX (II), where X = C1⁻ or NO⁻₂ and N = C₅H₅N or C₆H₅CH₂C₅H₄N, are used as ionophores to prepare nitrite responsive polymeric membrane electrodes. The influence of the initial axial ligand (X⁻ and N) on the operative ionophore mechanism of these metalloporphyrins within the solvent polymeric membranes is examined. Results from potentiometric and electrodialysis experiments suggest that in the presence of nitrite in the test sample and internal solution, both types of Co (III) porphyrins studied (I and II) act as neutral carriers and that the addition of lipophilic cationic sites (e.g., tridodecylmethylammonium ions (TDMA⁺)) to the organic membrane is essential to improve the selectivity and long term stability of sensors prepared with these species. Membranes formulated with (I) or (II) in the nitrite form along with TDMACl in plasticized PVC films exhibit the following selectivity sequence: SCN⁻ > NO⁻₂ ˜ C1O⁻₄ > Sal⁻ > NO⁻₃ > Br⁻ > C1⁻. Membrane electrodes with added lipophilic cationic sites are shown to exhibit rapid, fully reversible and Nernstian response towards nitrite ions in the concentration range of 10⁻¹–10⁻⁵ M, with good long term stability.     

Ab initio molecular orbital study on three feasible mechanisms for substitution of the vinylic carbon in F2C=C(OMs)BMe3−

A substitution on 2,2-difluorovinylic carbon was investigated by using ab initio molecular orbital calculations. Three feasible mechanisms, which are the S_N1-like, the S_N2-type and the addition-elimination mechanisms, were ex- amined for a model borate, 2,2-difluoro-1-mesyloxyvinyl(trimethyl)borate. Four TSs were obtained depending on the position of Li⁺ around the vinylborate although activation energies in the gas phase are rather high (ca. 30–40 kcal mol⁻¹) in comparison with that expected from the experimental conditions. It was confirmed at the SCRF-IPCM calculations that the solvent effect reduces the acti- vation energy of one S_N2-type mechanism very much (4. l kcal mol⁻¹ at the B3LYP/6-31+G^*//RHF/6-31+G^/s* level of theory) while those for the other mechanisms do not change very much. Therefore, the S_N2-type mechanism is applicable to the substitution reaction observed for the vinylborate.